Used Cooling Room for sale (8,645)

Condition: used, Year of construction: 1985, x-travel 485 mm y-travel 385 mm z-travel 380 mm table surface area 800 x 460 mm spindle taper SK 40 control CONTOUR 1 spindle turning speed range 50 - 2500 U/min Djdotqqllspfx Ai Eekw feeds 10 - 1000 mm/min rapid traverse 2 m/min table load capacity 600 kg quill stroke 80 mm total power requirement 7,5 kW weight of the machine ca. 2,0 t dimensions 2,4 x 1,7 x 1,98 m Acc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant - movement of X/Y/Z also possible via handwheels -

Condition: used, Year of construction: 1973, x-travel 290 mm y-travel 170 mm z-travel 310 mm table surface area 600 x 215 mm spindle taper SK 40 spindle turning speed range 50 - 2500 U/min feeds 9 - 450 mm/min quill stroke 70 mm total power requirement 1,8 kW Dkjdotqqn Rjpfx Ai Eew weight of the machine ca. 860 kg dimensions of machine L x W x H 1,06 x 1,05 x 1,33 m Accessories: vertical head with quill retraction, solid table, counter bearing, coolant

Condition: new, Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 2000 liters Machine dimensions in cm: Length: 270 Dedpfx Aeuu Rx Roi Ejkw Width: 154 Height: 222 Electric power: 6.5 kW

Condition: like new (used), Year of construction: 2020, functionality: fully functional, ambient temperature (min.): 4 °C, type of cooling: air, number of chambers: 1, A cold storage room is being offered. The cold storage room was in use for only 1 year. It has 2 units and a type of pass-through to avoid opening the door. Inspection and testing are possible at any time. Dismantling must be carried out by the customer. No guarantee is given for technical data. Dkodpfx Aioywfdpe Eew

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, cooling capacity: 131 kW (178.11 HP), type of cooling: air, aircooled Chiller MTA Dsdpfxeyuvppj Ai Ejkw Cooling cap.131 KW (47 refr.tons), 2 circuits with each 2 scroll compressors, Direct expansion evaporator, with integrated pump and tank R 410a tested,ready for operation

Year of construction: 2017, condition: ready for operation (used), Thermo Scientific Heraeus Multifuge X3R TX 750 Refrigerated Centrifuge 2017 No. 611 • Voltage: 230 V, 50/60 Hz • Power consumption: 10.5 A • Power input: 1950 W • Refrigerant: R404A, 0.52 kg (31 bar) • Max. kinetic energy: 62.5 kNm • Max. sample density: 1.2 g/cm³ • Operating temperature: -10 °C to +40 °C • Integrated cooling (refrigerated centrifuge) Dimensions: 670 × 750 × 360 mm (L × W × H) Weight: approx. 140 kg Year of manufacture: 2017 You are welcome to arrange an on-site inspection. We are happy to organize an affordable shipping service for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID number is given. Subject to prior sale. Visit our shop and check out our other offers as well. Dsdpsyvtyijfx Ai Eekw All brand names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Technical data variations and errors in the description may occur and are subject to change.

Condition: good (used), Complete syrup plant with CIP and water preparation, installation connected with stainless steel pipes, valves, and pumps. Djdeywnlcopfx Ai Eskw

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 38 mm, turning diameter: 330 mm, turning length: 750 mm, total length: 1,330 mm, total width: 750 mm, total height: 700 mm, spindle speed (max.): 1,650 rpm, spindle speed (min.): 60 rpm, type of input current: three-phase, overall weight: 320 kg, MACHINE IN STOCK – AVAILABLE FOR IMMEDIATE DISPATCH MTP UNIVERSAL LATHE 330 × 750 – 400 V / 230 V – 1.1 KW A professional universal lathe for precision machining of metal components, suited to workshops, production facilities, tool rooms and maintenance departments. Both the 400 V and 230 V versions are in stock, so the machine can be connected to the power supply already available in your facility. The lathe handles shafts, tapers and other rotational parts, and cuts both metric and imperial threads. Its rigid construction, wide spindle speed range and comprehensive standard equipment ensure accurate, versatile and comfortable operation. TECHNICAL DATA • Swing over bed: 330 mm • Maximum workpiece length: 750 mm • Swing over cross slide: 220 mm • Chuck: Ø160 mm • Spindle bore: 38 mm • Spindle taper: MT5 • Metric threads: 20 pitches, 0.5–4 mm • Imperial threads: 9–40 TPI • Longitudinal feed: 0.135–1.80 mm/rev • Tailstock quill: 70 mm travel, MT3 • Spindle speeds: 12 (60–1650 rpm) • Motor power: 1.1 kW (both versions) Dodsyvfzqepfx Ai Eokw • Power supply: 400 V or 230 V (specify when ordering) • Dimensions (L × W × H): 1330 × 750 × 700 mm • Weight: 320 kg STANDARD EQUIPMENT • 3-jaw chuck Ø160 mm • Cooling system • MT3 dead centre • Lathe stand • Change gears for thread cutting • Work light OPTIONAL EQUIPMENT • 2-axis Digital Readout (DRO) DELIVERY THROUGHOUT EUROPE We arrange transport to any destination in Poland and across Europe. Delivery costs are calculated individually; please send us your postcode and city for a transport quotation. Contact us for pricing and availability. We also invite you to explore the other machines in the Metal Technics Polska range.

Condition: new, Year of construction: 2026, functionality: fully functional, feed length X-axis: 580 mm, feed length Y-axis: 200 mm, feed length Z-axis: 130 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 130 mm, spindle speed (max.): 3,200 rpm, spindle speed (min.): 100 rpm, spindle mount: MK 4, throat depth: 286 mm, quill diameter: 130 mm, quill travel distance: 130 mm, type of input current: three-phase, total length: 860 mm, total height: 1,200 mm, table width: 240 mm, input voltage: 400 V, total width: 740 mm, table length: 800 mm, drilling capacity: 45 mm, position of the milling head: ±90°, drilling depth: 130 mm, workpiece weight (max.): 375 kg, distance table to spindle center: 450 mm, Equipment: documentation/manual, rotational speed infinitely variable, Drilling and Milling Machine ZX7045B VARIO (with automatic spindle feed) – professional metalworking machine The ZX7045B VARIO drilling and milling machine is a solid and versatile machine designed for professional metalworking in workshops, production plants and tool rooms. The machine allows drilling, milling and tapping operations, making it a universal solution for many machining applications. The machine is equipped with a powerful 2.2 kW motor and infinitely variable spindle speed control in the range of 100–3200 rpm. The spindle is mounted on precision bearings ensuring high machining accuracy, while the gear transmission operating in an oil bath guarantees durability and quiet operation. The head can be adjusted in height and tilted ±45°, allowing machining at various angles. The automatic spindle feed and automatic spindle reverse during tapping significantly improve operator convenience. A large worktable measuring 800 × 240 mm with T-slots allows stable clamping of workpieces. The heavy-duty construction and base ensure high stability during operation. The machine is also equipped with a cooling system and an emergency stop switch. Technical specification • Model: ZX7045B VARIO • Max drilling capacity: 45 mm • Max face milling diameter: 80 mm • Max vertical milling diameter: 32 mm • Max tapping capacity: M12 • Spindle taper: MT4 • Spindle travel: 130 mm Dkedpfxeyvh Hqs Ai Esw • Spindle speed: 100 – 3200 rpm • Speed control: variable • Max distance spindle–table: 450 mm • Distance spindle axis–column: 286 mm • Table travel X: 580 mm • Table travel Y: 200 mm • Table size: 800 × 240 mm • Head: tilting ±45° • Motor power: 2.2 kW • Power supply: 400 V • Machine dimensions: 860 × 740 × 1200 mm • Weight: 375 kg Delivery to the customer is possible. Shipping cost is calculated individually by the transport company. If you are interested in other machines, please visit our website.

Condition: used, Year of construction: 2005, x-travel 620 mm y-travel 420 mm z-travel 400 mm Control Heidenhain TNC 124 turning speed range - spindle 50 - 4.000 U/min transmission ratio 2 drive capacity - spindle motor 6 kW tension force 10 kN swivellable manuell +/-45 ° max. tool diameter 125 mm max. tool weight 6 kg table surface area 400 x 800 mm T-slots 5x14x80 max. table load 400 kg feed speeds X/Y: 0 - 6.000 mm/min feed speeds Z: 0 - 4.000 mm/min rapid traverse X/Y: 6 m/min rapid traverse Z: 4 m/min total power requirement 11 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,9 x 3,5 x 2,0 m Dkjdpjylcpqjfx Ai Esw Includes: Heidenhain TNC124 point-to-point control Electrical documentation available Coolant system 2 work lights Machine vise Various tool holders Various SK40 tools Enclosure with 2 sliding doors available, pictures to follow

Condition: used, HYFRA VWK 270-EN cooling water recooler Dodpfx Aieyn Sbns Eskw

Condition: used, Drycooler Cabero Dkjdpjyrnnrsfx Ai Ejw -Type: S-GC/DED 095 KA/2X4E -Number of fans: 8 x 910 mm -RPM: 510 -Dimensions: 6100 x 2360 x 2450 mm -Volume: 127.15 L -Quantity in stock: 4 -Condition: Used in very good condition, ready to work

Year of construction: 2012, condition: excellent (used), functionality: fully functional, Glycol 8.5 meter cooling tunnel Belt width - 375mm Djdpfx Aiox Rzrps Ejkw

Condition: used, Year of construction: 2010, functionality: fully functional, cooling capacity: 172.5 kW (234.53 HP), type of input current: three-phase, overall weight: 481 kg, input voltage: 400 V, Equipment: type plate available, Güntner table-top recooler with two fans. Description as per the attached data sheet. Multiple units available! Dkodpfx Aoy Dipcei Eow

Condition: excellent (used), Year of construction: 2003, Band filter system 900L INTERLIT in mint condition with 40 bar IKZ pump and others, suitable for Deckel Maho Pfronten machines such as DMU 200 and more, but also compatible with other machines. Djdpfx Aioy Ambyo Ejkw

Condition: used, CTS Type: TSS-70/130 Water-cooled cooling unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. The device is used for performing temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material tests Aging tests Electronics and component tests Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/130 Test volume: 130 liters Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K in time ±2 K spatially Temperature change rate: max. 100 K/min on average for shock test tests Dedpfxsy Hkd He Ai Ejkw without heat input Temperature adjustment rate: ≤ 15 min in the range of -65°C to +200°C with 10 kg of ICs Cycle time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A On-site protection: 32 A slow-blow fuse Connection: Cekon 32 Refrigeration system: Refrigerant: R404A / R23 water-cooled, low-noise, fully hermetic Equipment / Features: CTS control panel Microprocessor-controlled control and monitoring system Program operation up to 100 test programs possible digital setpoint and actual value display RS232 interface 2 free switching channels for on-site control of the test specimen Fault message on potential-free contact Load up to 30 V DC, 2 A EMC tested Technical design: Hot and cold chamber Mobile frame with lifting spindle drive Test chamber / mobile frame made of stainless steel, material no. 1.4301 Insert basket made of stainless steel wire Pipe passage NW 50 with sealing plug Compressed air connection 1/4" AG Condensate drain non-pressurized R 1/2" internal thread Safety door lock lockable door with window Dimensions according to installation diagram: External dimensions approx.: 2335 x 940 x 1820 mm Loading dimension approx.: 1990 x 940 x 1652 mm Test chamber dimensions: height approx. 410 mm Width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Other data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: see pictures (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PRTC-1500C, total length: 2,800 mm, total width: 1,050 mm, total height: 1,650 mm, warranty duration: 12 months, overall weight: 950 kg, input voltage: 380 V, power: 6 kW (8.16 HP), 45 m³ vacuum pump 2 HP cooling system KR373 geared motor 7'' HNC operator panel PLC control Dksdpjydlk Usfx Ai Ejw Complete stainless steel housing 1050x2800x1650 mm 950 kg

Year of construction: 2016, condition: excellent (used), functionality: fully functional, We are offering this very well-maintained cooling system from IKS Industrielle Kühlsysteme GmbH, year of manufacture 2016. The system operated without any issues until it was decommissioned in 05_2025 and received regular maintenance. If you have any questions or require further information, please send us a message or give us a call. Djdpfxoyx Hb Ee Ai Eokw Due to the size and complexity of the system, it is only offered for sale after a prior inspection.

Year of construction: 2014, condition: good (used), functionality: fully functional, machine/vehicle number: 14-674681, Used Evapco ATW 360-4M cooling tower for glycol, built in 2014. Complete with 2 belt-driven fans producing an air flow of 344,880 m³/h and a water pump with a water flow of 468 m³/h. The cooling tower operated with a York TDSH 283L water-cooled chiller rated at 2,680 kW under the following conditions: Dsdpfxexz Ex Ss Ai Eskw Temperatures: -6.7 °C/+35 °C. Speed: 2,950 rpm Refrigerant type: R507. Feel free to contact us for more information!

Condition: used, functionality: fully functional, Tumbler with cooling system Dedpfewd I E Ajx Ai Eskw Manufacturer: Gunther Model: GPA 500K Made of stainless steel Dimensions: 2200 x 1650 x 2550mm Volume: 500 liters Electric power: 3.5kW

Condition: used, TECHNICAL DETAILS - Rated power : 38 [kW] - Power consumption : 0.013 [kW] WEIGHT & DIMENSIONS Dksdpewttdpefx Ai Ejw - Machine weight : 300 [kg]

Condition: new, Year of construction: 2024, power: 1.2 kW (1.63 HP), Equipment: pallet forks, SCHORR electric pallet truck Pro 1500kg load capacity 4.5m / 5m lifting height RR15HH450E / RR15HH500E free lift -- Reaches a lifting height of 4.5m / 5m (depending on selected variant) -- Free lift: mast only extends from the height of the mast - ideal for low ceiling heights -- Robust triplex mast & solid chassis -- Includes powerful 24V 240Ah lead batteries -- Digital energy level indicator & hour meter Prices depending on lift height / variant: -- 4500mm lift height (RR15HH450E): 7690€ -- 5000mm lifting height (RR15HH500E): 8490€ Robust and high-quality design Thanks to its robust and stable design, the pallet truck guarantees high stability and durability. With a load capacity of 1500kg, this high lift pallet truck is a real powerhouse and offers the strength needed to lift heavy loads effortlessly up to 4.5m or 5m. Free lift function With its free lift, the high lift pallet truck is particularly suitable for warehouses and rooms with low ceilings and clearance heights. The triplex mast only extends from the height of the mast (1570 mm) and therefore enables safe and effective working in confined spaces. A real all-rounder in combination with the lifting heights of 4.5m and 5m. Charger included Dkodpoqwdldofx Ai Eow The built-in 24V lead battery with a capacity of 240Ah ensures a long service life. To charge the electric pallet truck, you can simply connect it to a conventional 230V socket using the charger included in the scope of delivery. Easy handling The pallet truck is easy to operate and has a high-quality control unit, which is waterproof and can therefore also be used in damp or cool rooms for short periods. In addition, the control instruments such as the battery charge indicator, the emergency switch and the keys are centrally located and therefore in the operator's direct field of vision. Various driving programs In addition to the normal transport speed of approx. 5.8 km/h, it also has a "creep mode". This mode enables slow and precise movement in order to maneuver even in the narrowest aisles and shelves. Technical data Manufacturer (abbreviation): SCHORR Manufacturer's type designation: RR15HHE free lift Load capacity: 1.5t Model: 450E // 500E Tare weight incl. batteries: 1125kg // 1155kg Drive: Electric Tires: Polyurethane Basic dimensions Overall length: 1975mm Overall width: 820mm Length including fork crown: 905mm Stroke: 4500mm // 5000mm Free lift: 1570mm // 1740mm Height of mast retracted: 2054mm // 2214mm Height of mast extended: 5030mm // 5510mm Fork dimensions DIN ISO 2331: 60mm x 170mm x 1150mm Fork outer spacing: 570mm Aisle width with pallet: 800x1200 lengthwise 2450mm Turning radius: 1575mm Travel speed Travel speed with/without load: 5.8km/h / 6.0km/h Lifting speed with/without load: 0.09m/s / 0.16m/s Lowering speed with/without load: 0.15m/s / 0.16m/s Max. Gradeability with/without load: 6% / 15% Would you prefer to finance or lease the device? No problem! We also offer you attractive options for this. Simply contact us and we will advise you on the various options. We look forward to hearing from you! We at SCHORR will be happy to answer any questions you may have about our forklift trucks. You can reach our competent team by phone or e-mail. We look forward to hearing from you and being able to help you with advice.

Year of construction: 2018, condition: new, functionality: fully functional, New oil cooler Alfa Laval rated capacity at 64,5/57,5C° = 277 KW Flow rate 80m3/h Dkjdpfx Aioxu Eb Ho Ejw 3 Fans, 845rpm, 0,77KW each Several units available

Condition: new, Year of construction: 2023, Buhler Cooling Die Polycool 1000, designed for meat analogues. New in box. Dsdpjxw Ebfefx Ai Ejkw

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, CLEANROOM - ISO 8 | Cleanroom requirements ISO Class 8 | ISO Cleanroom Class 8 | Cleanroom classification. In order to achieve an ISO 8 air purity class in a Cleanroom, several levels of air filtration are usually used (e.g. G4 pre-filter, F9 filter, H13 final filter). Air movement in the room is non-unidirectional (there is a mixing of "clean" air supplied to the room with "dirty" air present in the room). Air vents in the ISO 8 room are placed on the walls. The required number of air exchanges per hour will depend on the nature of the activities conducted in the room and the number of personnel present, but the goal could be to provide 10-40 air exchanges/hr. In ISO Class 8, personnel are often present continuously. Employees may be dressed in standard work attire and visitors in a disposable apron. It is recommended to maintain a minimum overpressure of the room relative to the adjacent zone of 5-10 Pa. Requirements for equipment and materials intended for Clean Room with ISO air cleanliness class 8 (maximum average amount of particles released when: number of samples taken = 100; measurement performed in accordance with ISO 14644-14 in a cleanliness class at least one better than the purpose of the device; number of particles/m3) Detailed description in photos. Technical drawings attached to photos. Dkjdpfxeq H H Ruj Ai Eow Description of ventilation The purpose of the ventilation installation performed was to achieve the following air parameters in the Clean Room. The installation was made with the GBD PHARMA 2000 system, meeting all the requirements for 'clean rooms' in the highest classes of air purity. Parameters for the installation: a. Air purity - ISO 8. b. Temperature 19-23 st C c. Humidity max 38%. a. To ensure the required purity of the supplied air, an air handling unit manufactured by DOSPEL with a maximum capacity of V= 3500 m3/h [up to 15 air changes per hour] was used. The air handling unit is equipped with pocket filters : pre-filters FK EU5/EC2 and fine filters FK-EU9/EC2. In addition, HEPA 11 filters made by EUFILTER were used in diffusers located in the ceiling. Data sheets in point H6. As a result , with a measured flow rate of 3264 m3/h, an ISO 7 [class "C"] cleanliness class of the room was obtained in the resting state, and thus an ISO 8 [class "D" ] cleanliness class for the working state. b. The temperature range of 19-23 deg C is for the enlarged cooler and chiller to be freely maintained with 25% fresh air. c. In order to achieve in summer conditions with high temperatures of 30 deg C and humidity of 80%, a freon chiller of 31.4 kW and a chiller of 33.5 kW of cooling power were used. The chiller is made by FUJITSU supplied by Klimatherm Gdansk. The room is automatically regulated overpressure in relation to the external pressure - the pressure difference at the door : 15 Pa The automation of ventilation allows for "economical" mode , in which the installation works in a closed circuit and an overpressure of 15 Pa is maintained. Technical data attached to the photos.