Used Deckel Dialog for sale (702)

Condition: used, Year of construction: 2007, operating hours: 73,090 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 350 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 21 kVA, controller manufacturer: Siemens, controller model: 840D powerline, table width: 380 mm, table length: 500 mm, overall weight: 6,500 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 24,649 h, number of slots in tool magazine: 30, input voltage: 400 V, number of axes: 5, Equipment: chip conveyor, For sale is a machining center from manufacturer Deckel Maho, model DMU 50, in well-maintained and technically flawless condition. The machine has been serviced regularly and is in excellent condition both visually and mechanically. It is fully operational, tested, and ready for immediate use. Additional equipment: Pgjdpfx Aoxwtp Rjf Isg - Paper band filter - Coolant system With our all-inclusive package, we personally handle the complete service for you upon request – from delivery to the commissioning of your new machine. This includes unloading, placement, and alignment of the machining center. Afterwards, our experienced service technicians carry out professional commissioning, perform all necessary function tests, and ensure your machine operates reliably and precisely. Furthermore, we offer tailored training sessions for your employees so that you can maximize the potential of your machine from day one. Even after installation, we remain at your service—be it for maintenance, technical questions, or future upgrades. With our all-inclusive package you have nothing to worry about – we ensure everything runs smoothly so you can focus entirely on your production. Optionally, you can also purchase extraction systems, attachments, and accessories from us – including high-quality Donaldson extraction units – to make your production even more efficient and clean. Our service promise: Quality, expertise, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians, specializing in Mazak machines as well as other brands. We place great value on personal support and continue to assist you even after the purchase. You are also welcome to inspect and test the machine under power at our facility at any time. We cordially invite you to visit us and see the condition and functionality of the machine for yourself. With us, you are in the best hands – professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG All information without guarantee.

Condition: used, Year of construction: 2007, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG Deckel Maho Machining Center 5-Axis Simultaneous Pgsdpsxtqfnofx Af Ieg Type: DMU 50 EVO Linear Year: 2006 Complete Machine With Documentation CNC Heidenhain Mill Plus type Machine disconnected Ready for loading

Condition: used, Year of construction: 2003, x-travel 1.600 mm y-travel 1.250 mm Pjdsydflrepfx Af Iogg z-travel 1.000 mm size of pallet 1.000 x 1.250 mm control SIN840D power capacity at 40 % load 38,00 KW spindle turning speed - stepless 20 - 10.000 U/min power capacity at 100 % load 25,00 kW max. torque at 40% / 100% load 288 / 187 Nm tool taper SK50 feed X/Y/Z/-axis 20 - 15.000 mm/min rapid traverse X/Y/Z 60,00 m/min B - axis -150° / +80° x 0,001 ° feed B-axis 3.600 ° / min C-axis 360 x 0,001 ° Rapid motion C- axis 1 - 3.600 U / min. table load 3.000 Kg tool magacine with 240 tool diameter 110 mm wotkpiece diameter with 2 vacant positions 250 mm tool length - max. 650 mm weight of tools max. 15,00 kg total power requirement 75,00 kW weight of the machine ca. 55,00 t dimensions of the machine ca. 12,50 x 8,00 x 4,20 m 5-axis machining center with SIEMENS Sinumerik 840D control electronical handwheel operating mode 4 240-position tool magazine 4-position pallet storage system TS641 measuring probe BLUM laser coolant system coolant through the spindle chip conveyor coolant cooling

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 30000452, travel distance X-axis: 300 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 340 mm, quill travel distance: 60 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, table length: 600 mm, table width: 210 mm, overall weight: 710 kg, table load: 200 kg, Equipment: documentation/manual, DECKEL FP1 – completely overhauled in 2012 by FPS (Germany), equipped with Heidenhain digital display, tool cabinet with accessories, and dividing head. Since the overhaul, the machine has seen very light use and is therefore in like-new condition. About FPS: Specialized in the complete refurbishment of DECKEL machines. MANUFACTURER: DECKEL MODEL: FP1 CONDITION: Overhauled (2012) – mechanically and electronically as new! LOCATION: Graz (Austria) IMAGES/VIDEOS: For additional photographs and videos of the machine in operation, please contact us. Description: This high-quality DECKEL FP1 milling machine has been completely refurbished, with both mechanical and electrical components upgraded to the latest standards. A new CE-compliant control cabinet was installed in accordance with current statutory requirements (BGVA 3 / DIN-EN 60204-1, new machinery standard). During the overhaul, the control system, drive package, and drive motors were all replaced and brought up to date. The modernization also included the installation of a new, touch-safe control panel and new motor. Technical data: Operation: manual, with option for automatic positioning Control: 3-axis Heidenhain digital readout Spindle speed range: 40 – 2000 rpm (geometrically stepped, 16 speed stages) Feed rate: 10 – 500 mm/min (stepless adjustment) Rapid traverse: 1.2 m/min (stepless adjustment) Quill: Vertical & horizontal extension 60 mm, SK40 Travel (X/Y/Z): 300 / 150 / 340 mm Table size: 600 × 210 mm Table load: max. 200 kg Machine weight: 710 kg incl. angle table and milling head Footprint: 1600 x 1400 x 1750 mm (W / D / H) Equipment: Vertical and horizontal spindle Milling head manually swivels ± 90° Completely new electrics and drive packages Overhauled – mechanically and electronically as new Pgodpoxywhcofx Af Ieg Extras: Z-axis bellows Special paintwork Highlights: Heidenhain digital readout for precise operation During overhaul, entire control system, drive package, and drive motors were renewed Contact us to arrange a viewing appointment.

Condition: reconditioned (used), Year of construction: 1990, Universal Tool Milling Machine Make: DECKEL Model: FP 1 Aktiv Year of manufacture: 1990 – workshop-inspected Machine no.: 2102-5866 Milling head type: 2171 Milling head no.: 4613 Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X, Y, and Z axes - Universal table 590 x 250 mm (T-slot: 12 mm) - Vertical milling head SK 40 with pull stud thread S 20 x 2 - Without coolant system; Pgedpfx Afox S Edlj Isg can be retrofitted if required - Centralized lubrication, electric - Operating manual Used as seen, sold without warranty The machine is technically in the condition of its year of manufacture.

Condition: ready for operation (used), A CNC 3-axis universal milling machine Deckel (DMG Mori) is available. Travel X/Y/Z: 1200mm/600mm/500mm, tool holder: SK40, speed: 5000rpm, feed rate: 10m/min, rapid traverse: 10m/min, table dimensions X/Y: approx. 1600mm/675mm, max. table load: 2000kg. Machine dimensions X/Y/Z: approx. 3300mm/2400mm/2400mm, weight: approx. 7000kg, control: Grundig Dialog 11. An on-site inspection is possible. Podpfx Ajycwq Dof Iegg

Condition: used, functionality: fully functional, 5-axis Spindle 18,000 rpm Tool magazine with 32 positions Tool holder SK40 Spindle hours: 15,389 Zeroclamp 12 pots 138 (zero-point clamping system) Components: Machine with NC rotary table and pick-up magazine Chip conveyor Pedpfx Afoyc Tq Hj Isgg Coolant/lubricant unit 250L Belt filter system 600L Oil/emulsion mist separator

Condition: used, DMU60: 5-axis, spindle 18,000 rpm, tool magazine with 24 slots, tool holder SK40, spindle hours: 15,305, Zeroclamp 6 pots 138 (zero-point clamping system). Pgedjyc Tmbepfx Af Isg

Condition: used, Year of construction: 2006, functionality: fully functional, Deckel Maho DMC 835V CNC Machining Center Year of manufacture: 2008 Control unit: Siemens 840D with Shopmill Travel (X/Y/Z): 835mm/510mm/510mm Spindle speed: 10,000 rpm Spindle power: 14kW Table dimensions : 1000 x 560mm Table load capacity: max. 800kg Workpiece height max: 720mm Tool positions: 20 Tool holder: SK40 Weight: approx. 4,500kg Accessories/options: Podjyftvbjpfx Af Isgg Chip conveyor Documentations Remote control Tool holders

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,768 h, Control Unit Brand HEIDENHAIN Main Drive Number of axis 5 Spindle Speed 18000 RPM Pgsdpfx Afjx Rd Hps Ijg Tool taper SK 40 This 5-axis DMG DECKEL MAHO DMU 50 eVo linear was manufactured in 2005. It features a HEIDENHAIN control, a 40bar IKZ, a 60-tool magazine, and a spindle speed of 18k rpm. The machine includes automation capabilities fully adjustable for different product formats and positioning. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 50 eVo linear machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2000, Immediately available from toolmaking in Switzerland: 5-axis milling machine Deckel Maho Type: DMU 35 M Year of manufacture: 2000 CNC control: Heidenhain TNC 310 M Electronic handwheel Table: 400 x 280 mm Table load up to 100 kg Podpfx Ajyaydhof Iegg Travel X/Y/Z: 350/240/340 mm Stepless spindle speeds: 0 – 5000 rpm Taper: SK 40 Rapid traverse: 5 m/min Servomotors for X/Y/Z axes Swivel range: 360° Table clamping: +105/–150° Weight: 2 t Tool holders, hydraulic vise Price: EUR 6,500 plus VAT ex works location.

Condition: used, Year of construction: 2002, Manufacturer: DECKEL-MAHO, Model: DMU100T, Year of manufacture: 2002, Control system: Heidenhain iTNC 530, 5 axes (swivel head, NC rotary table), 32-position tool changer, tool holder SK40, spindle speed 10,000 rpm, chip conveyor, coolant unit by Schimpke, band filter by Interlith, type STB3/600HD, operating hours: 72,535; 28,209, tool monitoring system by Brankamp, 4 drawer cabinets/containers, 1 WTS roller shutter cabinet, contents: approx. 150 SK40 tool holders, clamping devices, measuring tools, thread taps, center drills, 1 HD vice, make: Allmatic LC 160-200, infrared measuring probe (in tool changer) Pgodpfx Afox R Edvo Ieg +++ Attention: Machine is part of an online auction! +++

Condition: used, Year of construction: 2007, Make: DECKEL-MAHO, Model: DMU100P DuoBLOCK, Year of manufacture: 2007, Serial No.: 11450001263, Control system: Heidenhain iTNC530, 5 axes, CNC rotary/swivel table, travel X/Y/Z: 1,000 x 1,000 x 1,000 mm, tool holder: SK 50, spindle speed: 12,000 rpm, tool monitoring by Brankamp, 60-position tool changer, chip conveyor, belt filter system by BMF, model KA600, year 2007, accessories, total operating hours: 67,254; 24,704, 2 WTS roller shutter cabinets by Lista, 3 drawer cabinets, width 1,000 mm, 6/8/9 drawers, contents: 100 SK 50 tool holders (complete tools), indexable insert face mills, drills, indexable cutting inserts, clamping devices, setup tools, infrared measuring probe, tool assembly aid. +++ Note: This machine is part of an online auction! +++ Pgjdpfxex R Dwze Af Iog

Condition: used, Year of construction: 1996, operating hours: 8,900 h, functionality: fully functional, DMG vertical machining center Model DMU 50 V Pjdpoyahh Iefx Af Iogg Year : 1996 5 axis Length movement : 500 mm. Cross movement : 380 mm. Vertical movement : 380 mm. Spindle : BT 40 Spindle speed : 8000 RPM. Tools in magazine : 24 pieces Control : Deckel Maho MillPlus Spindle hours : 8900 Interface RS-232 C Short arbors

Condition: ready for operation (used), Technical Data – DECKEL MAHO CNC Machining Center General Information Manufacturer: DECKEL MAHO Machine type: CNC Vertical Machining Center Axes: X / Y / Z (optionally with B and C axes depending on configuration) Control: Heidenhain TNC 426/430PB Working Range: Travel X-axis: 710 mm Travel Y-axis: 520 mm Travel Z-axis: 520 mm Feed Drive Drives: AC servo motors Feed rate X/Y/Z: infinitely programmable up to 10,000 mm/min Rapid traverse X/Y/Z: 30 m/min Setup mode: 20 – 2,000 mm/min Input increment: 0.01 mm Position Measuring System Resolution X/Y/Z: 0.001 mm Position tolerance: with direct measuring system: 0.010 mm Main Spindle – Version 1 (Standard) Max. speed: 12,000 rpm Drive: AC servo motor / motor spindle Motor output: 10.0 kW at 100% duty cycle 15.0 kW at 40% duty cycle Speed range: stepless: 20 – 12,000 rpm Setup mode: 20 – 800 rpm Torque: available at the spindle, efficiency considered (see power diagram) Main Spindle – Version 2 (Option) Max. speed: 30,000 rpm Motor output: 15.0 kW at 100% duty cycle 20.0 kW at 40% duty cycle Speed range: stepless: 20 – 30,000 rpm Setup mode: 20 – 800 rpm Power diagram Power and torque charts available for: 12,000 rpm spindle 30,000 rpm spindle Designed for continuous operation (S1) and short-time operation (S6 – 40%) Working Spindle – Tool Interface SK version Tool holder: SK40 to DIN 2079 Steep taper shank: DIN 69871 A Tool clamping: hydraulic / mechanical Pull stud: DIN 69872 Form A or ISO/DIS 7388/2 Type B HSK version Tool holder: HSK-E50 to DIN 69893 Tool clamping: hydraulic / mechanical Tool Changer – SK Magazine positions: 24 (optionally 60) Max. tool length from spindle nose: 315 mm Max. tool weight (automatic change): 6 kg Max. total magazine weight: 80 kg (optionally 180 kg) Tool Changer – HSK Magazine positions: 24 (optionally 60) Max. tool diameter: 40 mm Max. tool length from spindle nose: 150 mm Required compressed air: 5.5 – 8.0 bar Work Table Pedpfx Asxzvn Dsf Iegg Clamping surface (standard): 1,000 × 600 mm Permissible table load: 800 kg NC rotary table (optional): Clamping surface: Ø 700 × 500 mm Load: 350 kg Weight & Transport Machine weight (standard): approx. 5,500 kg Max. installed weight (incl. workpiece, coolant, etc.): approx. 8,100 kg Transport weight: approx. 5,500 kg Transport dimensions (L × W × H): 2.75 × 2.02 × 2.73 m Media / Connection Values Compressed air: Minimum pressure: 5.5 bar Max.: 8.0 bar Room temperature: Operation: +15 to +35 °C Optimal: +20 to +25 °C Relative humidity: 20 – 75 % Noise level: < 80 dB(A)

Condition: good (used), Year of construction: 2008, 1 used vertical machining center Manufacturer: Deckel Maho Model: DMU 80 monoblock Year of manufacture: 2008 Control: ITNC 530 Pgodpfx Afsxa Euds Ijg Technical specifications X travel: 980 mm Y travel: 630 mm Z travel: 630 mm Control: iTNC 530 Total power requirement: 10 / 15 kW Machine weight approx.: 9.5 t Space requirements approx.: 4*4*2.5 m Additional information Equipment: Electronic handwheel Operation mode 4 Manual swivel milling head Motor spindle 12,000 rpm SK 40 / Clamping DIN 69872 32-tool magazine Fixed table 1250 x 700 mm Chip conveyor Coolant system

Condition: good (used), 1 used universal tool milling machine make Deckel type FP 1 year 82 Podpfx Aern I Rzef Ijgg Technical data: x-travel: 300 mm y-travel: 160 mm z-travel: 340 mm Spindle holder SK 40 Table size: 600x210 mm Spindle speeds: 40-2000 rpm Machine weight approx.: 1 t Space requirement approx.: 1.6x1.3x1.8 m

Condition: excellent (used), functionality: fully functional, Deckel FP1 milling machine. Very good condition. Fully functional. Pedpfx Afexgdr Ie Iegg

Year of construction: 1987, condition: ready for operation (used), A CNC universal milling machine Deckel is available. Travel X/Y/Z: 400mm/400mm/400mm, table dimensions X/Y: 700mm/460mm, max. table load: 350kg, tool holder: SK40, quill stroke: 80mm, speed: 4000rpm, feed rate: 3600mm/min, rapid traverse: 4m/min. Machine dimensions X/Y/Z: approx. 1800mm/1800mm/2200mm, weight: approx. 2500kg, control: Contour 3. The tool change magazine is no longer in operation. Documentation available. An on-site inspection is possible. Pgjdpfx Afeya Hw Ue Isg

Condition: ready for operation (used), Year of construction: 2019, A Deckel FP2 universal tool milling machine completely overhauled in 2019 is available. Travel X/Y/Z: 400mm/200mm/400mm, table dimensions X/Y: 700mm/330mm, speed: 2000rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 1600mm/1400mm/1600mm, weight: approx. 1250kg. On-site inspection is possible. Psdpfx Afevf Iy Dj Isgg

Condition: used, Geldmacher MST / Deckel FP4M Milling Machine, Tool Milling Machine Weight: approx. 1,450 kg Year of manufacture: 2012 Installation dimensions: Reference value: approx. 2,500 × 2,700 × 2,100 mm (Length × Depth × Height) Travels: Pgjdpjxcldksfx Af Ijg X-axis: approx. 500 mm Y-axis: approx. 400 mm Z-axis: approx. 400 mm Spindle taper / Tool holder: SK 40 Quill stroke: Vertical quill: approx. 90 mm travel; additionally, the vertical milling head is movable on the spindle head Spindle speed range: Approx. 50 - 2,500 rpm Feed rates: Feed: approx. 8 - 630 mm/min; Rapid traverse (max. feed rate): approx. 1,300 mm/min The machine is in very good condition. You are welcome to arrange an inspection. We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, we can issue a net invoice (VAT-free) provided you supply a valid VAT ID number. Subject to prior sale. Visit our shop and take a look at our other offers as well. The stated company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from the technical data as well as mistakes in the article description may occur and are subject to change.

Condition: good (used), Year of construction: 2005, operating hours: 84,564 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 17 kVA, controller manufacturer: iTNC 530 Heidenhain, controller model: iTNC 530 Heidenhain, total height: 2,500 mm, total length: 3,000 mm, total width: 3,000 mm, table width: 500 mm, table length: 650 mm, table load: 200 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 22,855 h, spindle motor power: 13,000 W, number of slots in tool magazine: 16, tool length: 300 mm, tool diameter: 130 mm, tool weight: 6 g, Equipment: rotational speed infinitely variable, The machine is in good condition. A few things have been redone and freshened up. The following has been overhauled: -Complete X-axis bearing including ball screw and bearing -Various hydraulic components -Tool changer reset and sensors replaced -New door switch installed -New discs installed (unfortunately already got some flying chips again) -New coolant pump -New screen, as it was defective -New handwheel HR410 The machine does not have many spindle hours or switch-on hours. The machine has never seen a series production and has always been operated sensibly. Warm-up programs etc. We are tool and mold makers, so we tend to do more complex contours rather than heavy machining. I am only selling this because I need a simultaneous machine and also more travel paths. Technical data: Year of manufacture 2005 x-travel 500 mm y-travel 450 mm z-travel 400 mm Control iTNC 530 Heidenhain Main spindle Speed range - main spindle 20 - 10,000 rpm Drive power - main spindle 9 / 13 kW Torque 57 / 82 Nm Tool holder SK 40 Rotary table Pjdsvtnm Hjpfx Af Iogg Table clamping area 630 x 500 mm Swivel range -5 / +110 ° Max. table load 200 kg T-slots 14 H7 T-slots - distance 63 mm C-axis +/- 360 ° Feeds: Rapid traverse (X / Y / Z) 12 m/min Feed rate 10,000 mm/min Tool changer: Tool positions 16 pos. Max. tool weight 6 kg Max. tool length 300 mm Max. tool diameter 80 mm Max. tool diameter with free adjacent box 130 mm Tool holder SK 40 Total power requirement 17 kVA Machine weight approx. 3.6 t Space requirement approx. 3.0 x 3.0 x 2.5 m Tool milling machine - Universal DECKEL MAHO - DMU 50 Attention: no chip conveyor and no automatic measuring probe! - 5 axes (3+2) - WITHOUT tools Attached are pictures of the machine. The machine was intentionally not cleaned before taking the pictures, so it is in the "chip" and is used daily. You can also see the hours of the machine there. Kinematics and geometry are OK. for our needs, but could possibly be re-measured. We have never had any crashes etc.

Condition: good (used), Year of construction: 1990, Deckel FP 4 MK Tool Milling Machine Deckel FP 4 MK with Heidenhain TNC 113 Control System, Year of Manufacture 1990, Completely Overhauled in 2014, Excellent Condition, CE Compliant! This machine comes from the training workshop of Continental. Technical Data: Year of Manufacture: 1990 Completely Overhauled: 2014 Digital Readout: 3-axis active digital readout HEIDENHAIN TNC 113 X-Axis Travel: 500 mm Y-Axis Travel: 400 mm Z-Axis Travel: 400 mm Tool Holder: SK 40 hydraulic tool clamping DIN 2080 Milling Head Type: Vertical milling head Speed Range: 50 - 2,500 rpm, 18 steps Table Type: Swivel table Clamping Surface Table: 800 x 490 mm T-slot Size: 14 mm Weight: approx. 1,450 kg Dimensions: Pgjdpfx Ajyalcpef Isg approx. 2,500 x 2,700 x 2,100 mm Accessories and Equipment: Heidenhain TNC 113 control Hydraulic clamping vertical and horizontal Automatic central lubrication Spindle brake Technical documentation, spare parts diagrams, control manual, and programming examples Hand wheels Coolant system About the machine: Offered here is a Deckel FP 4 MK tool milling machine equipped with a Heidenhain TNC 113 control unit. This universal milling machine is in excellent original condition, having only been used for training purposes in a facility. The control is very user-friendly. Additionally, the machine features hydraulic clamping for both vertical and horizontal operations. Switching between vertical and horizontal milling is straightforward thanks to the tilting vertical head. The guides are regularly lubricated via the central lubrication system. The Deckel has been mechanically and electrically tested in our facility. You are welcome to inspect and test the Deckel under power on-site. You will find more milling machines from renowned manufacturers on our website.

Condition: used, Year of construction: 2000, Technical details: Pgedsu Idffspfx Af Iog x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm b-axis: manuell positionierbar ° c-axis: manuell positionierbar control: Heidenhain TNC 124 tool changer with: nein Plätze spindle taper MT: SK40 Revolution per minute: 4500 U/min. feed speeds infinitely variable: X/Y/Z: max. 14000 mm/min rapid traverse:: 5,0 m/min table-size: 700 x 500 mm total power requirement: 17 kVA Weight approx.: 2,91 t dimension machine xH: 2,0 x 2,0 x 2,5 m CNC universal vertical milling machine The machine has 5 axes. B- and C-axis manual with measuring system. B-axis table swivel -10° / +95° and C-axis table rotate 360° (not interpolatable, manually selectable via control). Cooling device (without pump) Operation via swiveling boom *

Condition: used, Year of construction: 2001, Technical details: x-travel: 630 mm y-travel: 560 mm z-travel: 560 mm c-axis: Tisch 360° ° b-axis: Spindel=rechts:90/links=10° manuell ° control: Heidenhain TNC 430 MillPlusM table-size: 1000x600 mm table load capacity: 400 kg tool taper: SK 40 Revolution per minute: 20 - 12 000 U/min. feed speeds infinitely variable: x/y/z= 20 - 10.000 mm/min tool changer: 2 Magazine tool changer with: 12 place pro Magazin spindle hours: 21 212 h operating hours - idle run: 49 845 h total power requirement: 20,6 kW Weight approx.: 6,7 t dimension machine xH: 3,0 x 2,0 x 2,15 m Equipment: - AC motors for x/y and z-axis - Tool clamping hydraulic/mechanical - Chip conveyor with separator (screw conveyor) - seperately working indexing head Ø 300mm with manual control unit for B-axis table tilting -10° / +95° and C-axis table turning 360° (not interpolable, electric selectable via manual control unit) - Coolant unit 8 m³/h (dimensions: L:1,1 x W: 0,54 x H:1,2m) - control unit Pgodpou Idgcjfx Af Isg *