Used Die Sinking Edm Machine for sale (67,052)

Condition: like new (used), Year of construction: 2008, operating hours: 1,120 h, Controller ARISTECH (similar as FANUC) Number of axes: 4 Table size 640 x 470 mm X Axis Travel 425 mm Y Axis Travel 300 mm Z Axis Travel 250 mm Max workpiece size 800 x 600 x 250 mm U Axis Available:standard Weight cca 3000 kg Dimensions LxWxH = 1860 x 2050 x 2100 mm The machine consist of following units 1. EDM machine 2. Controller cabinet Dcjdpfxsvvl Uaj Ab Uof 3. Water tank and pump 4. Water cooler 5. Transformer 6. Transformer Nr.2 (power supply) The machine was barelly used. Still unter power. It will be due to company liquidation.

Condition: good (used), Year of construction: 1998, Controller FANUC Series 16W Max size of wpc. 800 x 730 x 300 mm Max table load 750 kg X travel 520 mm Y travel 370 mm Z travel 300 mm U travel 120 mm V travel120 mm Dia of wire Ø 0,05 – 0,33 mm Dedpfx Ajul Uwljb Uecf No. of axes 5 (X, Y, Z, U, V) Capacity of tanks 650 Liters Accessories - Dielectric cooler - Coolant unit - Interface RS232 - MPG - Automatic wire threading - Manuals

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Serial No. Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Frame gap: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm (travel) Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working speed: 1-10 mm/s Y return speed: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8-axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 Dodpfxeya Iaqe Ab Ujcf - 2 freely programmable backgauge fingers, movable laterally (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 stop positions up to max. 1080 mm - Press beam with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light curtain - Operation via electric foot switch and/or two-hand control panel - Hydraulic clamping for the upper tool (TRUMPF system) with 20 mm clamping groove - Tool holder for the lower tool, height 160 mm x width 60 mm, with locating groove 14 x 23 mm - Tool system TRUMPF, supplied without tools Space requirements (L x W x H): 0 x 2500 x 3400 mm Transport height of the machine: 3360 mm Weight: 17,000 kg Good condition

Year of construction: 2025, condition: new, The RS-9 shredder has been specially designed for effective processing of various types of papers, taking into account the specifications of the punching machine it will cooperate with. The shredder enables the quick and safe shredding of paper directly received from the die-cutting machine for easy transport via a conveyor system to the baler. Our machine is not only easy to operate but also economical to maintain. It features advanced Siemens control that protects against overload. Additionally, the frequency converter ensures smooth start-up and precise motor control. We also design waste disposal systems from multiple punching machines to one shredder, allowing for fast and maintenance-free material packing into a baler. Dedsiklxbjpfx Ab Uecf Feel free to contact us.

Year of construction: 2000, condition: good (used), Platen-type equipment designed for die cutting, creasing, and perforating cardboard and corrugated board. Maximum sheet size: 720 × 520 mm. Output: up to 25–28 cycles per minute. Motor power: 2.2 kW. Weight: approx. 2000 kg Dedpfx Aboyb Tc He Ujcf No documentation available.

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Serial No. MK 285 Year of manufacture 1998 Dedpfx Aexpqy Dsb Uecf CNC Control SAFAN Software Version 5.07 TS1 Pressing force 500 kN (50 tons) Working length 2550 mm Stroke 215 mm Clearance between side frames 2700 mm Tool installation height max. 414 mm Table width 55 mm Table height above floor 950 mm Approach speed approx. 75 mm/s Return speed approx. 75 mm/s Working speed approx. 1.6 to 15 mm/s Motor power 9 kW Power supply 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN Software Version 5.07 TS1, Y1 and Y2 axis for press beam - 2-axis back gauge: X-axis (depth adjustment), R-axis (height adjustment) - 2 back gauge fingers, lateral manual adjustment (Z1, Z2) - Press beam driven by 2 servomotors and belt drive - Infinitely variable working speed - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) - Tool mount for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB System B) - Without press brake tools (new tool set from UKB costs approx. EUR 3,600 net) - Total recorded operating hours = 8,120 h - Work strokes 1,049,789 Space requirement (L x W x H): 3450 x 1850 x 2650 mm Weight 5,000 kg Good condition

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Dcodpfxsw Iq Uge Ab Uef Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine little used, in very good condition Equipment: Djdpfx Asyl Unxsb Uecf – Pneumatic clutch and brake – Console – Heated plate – 3 working modes: single, continuous, time-delayed opening – Centralized lubrication – Additional safety guards – Working tools – Hard pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, new upgraded electronics + laser protection Equipment: – pneumatic clutch and brake – control panel Dcedpfx Ajyl Um Uob Ujf – new upgraded electronics + laser protection – 3 operating modes: single, continuous, delayed opening – central lubrication – additional safety guards – operation tools – hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) III – 1480x1070 Machine lightly used, in very good condition Equipment: Dcjdjyl Umnepfx Ab Uof – Pneumatic clutch and brake – Control panel – Quick-mount frame (electric) + additional frame – 3 working modes: single, continuous, with time-delay on opening – Central lubrication – Additional safety covers – Service tools – Hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER VA (CAUHE) – 1860x1440 Machine with low usage, in very good condition Dcedpfxsyl Ulws Ab Ujf Equipment: – Pneumatic clutch and brake – Control console – 3 operating modes: single, continuous, time-delay on opening – Centralized lubrication – Additional safety guards – Working tools – Hardened pressure plate

Condition: used, Year of construction: 1976, functionality: fully functional, machine/vehicle number: M14L/8736, Offer Number: M14L/8736 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: HILGELAND / ZOM Type: TR4L Constr. year: 1976 diameter range: 6-12 mm Dedpfx Abewi Tmvj Uocf shaft length under head: 170 mm max. thread length: 102 mm output pieces/min: 125 Location: In our warehouse

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: M14L/9004, Offer Number: M14L/9004 Machinetype: thread rolling machine - flat die Dcjdpswi T U Tjfx Ab Uof Info: vibratory feeder Make: HILGELAND Type: FN10/12-80 Constr. year: 2002/2024 diameter range: 6-12 mm shaft length under head: 180 mm max. thread length: 80 mm output - pieces/min: 100-330 Location: In our warehouse

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: M14L/8732, Offer Number: M14L/8732 Machinetype: thread rolling machine - flat die Info: with washer assembly Make: HILGELAND Type: FN-6/60 Constr. year: 1990 diameter range: 6 mm shaft length under head: 80 mm max. thread length: 62 mm Dcodpfx Abewi Szxs Usf output - pieces/min: 450 Location: In our warehouse

Condition: good (used), Flat-jaw thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, knurling machine, thread rolling machine Djdpfxei Eg Nkj Ab Ujcf -Manufacturer: EWM, flat jaw thread rolling machine knurling machine -Type: unfortunately without type designation -Drive: 4.6/5.8 kW 1435/2890 rpm -Belt drive: 3-way adjustable -Knurling plate: RAA 1.0 -Central lubrication: -Dimensions: 1680/920/H1440 mm -Weight: 1308 kg

Year of construction: 2012, condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch -Manufacturer: Tekna -Type: TK280 HU3 -Matr.: 109 -COD.: Z994 598 88A340 -pneumatically operated -Piston stroke: 20 mm -Pressure power: 29.42 kN Dodpfx Absc Uldre Uscf -Nominal pressure: 6/7 bar -Foot switch -Year of manufacture: 2012 -Dimensions: 565/600/H1050 mm -Weight: 71 kg

Condition: like new (used), Year of construction: 2018, Usable wire diameters: from 0.1 to 0.3 mm. Machine in like-new condition with very few operating hours, mainly used for prototype production. Dodoykrcqjpfx Ab Uocf

Year of construction: 2017, condition: new, functionality: fully functional, Universally applicable bridge-type swing-beam cutting machine with lift table. Model: 5300A Dcsdjyly R Eepfx Ab Uof Designed for the manual cutting of sheet and roll materials. Machine configuration includes the following components: • Model 5300A / 1600 x 800 / 800 kN • Blade holder rails for fixed sheet width mounted on the bridge • Plastic cutting pad, type HY 78 Additional equipment: • Automatic die shifting device • Unwinding unit with powered feed for roll materials • Material hold-down device mounted at the table infeed for securing roll material during cutting • Laser material positioning device with 4 cross lasers • 1 spare cross laser Automatic die shifting device Material hold-down device mounted at the table infeed for fixing roll material during cutting Unwinding device with motorized feeding for roll materials Laser positioning system with 4 cross lasers and 1 spare laser Technical data: Cutting force: 800 kN Table area: 1600 x 800 mm Table height, approx.: 1000 mm Max. material passage height: 190 mm Stroke, adjustable: 15 – 165 mm Adjustable stops: 40 mm Height of safety light curtain: 750 mm Machine weight, approx.: 5,100 kg Hydraulics and drives: Bridge travel drive power requirement: 1.5 kW Bridge travel time, approx.: 2 sec. Closing speed: approx. 90 mm/s Cutting speed: 33 / 5.5 mm/s Return speed: approx. 52 mm/s Hydraulic motor power: 4 kW Oil requirement: 200 l (ISO VG 46) (The required quantity of oil is not included in the delivery.) Plastic cutting pad: Quality: HY 78 natural Shore hardness (D): 78 Dimensions: 1600 x 800 mm Pad thickness: 10 mm Material: polypropylene

Condition: ready for operation (used), Two identical machines are available. Connected load: 32kW, length: 3500mm, width: 2400mm, height: 2400mm, weight: 3t. On-site inspection is possible. Djdpfx Ajuyk Rleb Uocf

Year of construction: 1987, condition: ready for operation (used), A Mitsubishi wire EDM machine including an automatic wire changer (AWF system) is available. Travel X/Y: 381mm/749mm, table dimensions X/Y: 647mm/797mm, max. workpiece dimensions X/Y/Z: 647mm/749mm/259mm, max. workpiece weight: 950kg. Machine dimensions X/Y/Z: approx. 1850mm/2600mm/1950mm, weight: approx. 4100kg. Including 12 wire spools and one ceramic replacement plate. The wire changer is defective. Documentation available. An on-site inspection is possible. Dedpfx Abox Hz She Ujcf

Condition: ready for operation (used), Travel X/Y/Z/U/V: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm-0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. On-site inspection is possible. Dcedpfsuqackox Ab Ujf

Condition: ready for operation (used), Year of construction: 2008, An Agie start hole drilling machine for the EDM industry is available. Travel X/Y/Z: 300mm/200mm/300mm, electrode diameter: 0.3mm-3mm, max. drilling depth: 200mm, table dimensions X/Y: 400mm/300mm, max. workpiece weight: 300kg. Machine dimensions X/Y/Z: approx. 1400mm/900mm/2000mm, weight: approx. 950kg. Documentation available. On-site inspection is possible. Dcedpsu Ilbuefx Ab Uef

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 450mm/350mm/400mm, travel U/V: approx. +/-70mm, rapid traverse: 900mm/min, max. workpiece dimensions X/Y/Z: 1050mm/650mm/250mm, max. workpiece weight without/with tank: 800kg/400kg, wire diameter range: 0.2mm-0.33mm, tank volume: approx. 750l. Machine dimensions X/Y/Z: approx. 2000mm/2300mm/2500mm, weight: approx. 4000kg, control: Agievision. Documentation available. An on site inspection is possible. Dcedexwyv Rspfx Ab Usf

Condition: ready for operation (used), Year of construction: 2006, A cold chamber die casting machine Urpemak for aluminium is available. Clamping force: 50t, platen width: 500mm, tie bar spacing: 500mm, shot weight: 50cm³, ejector force: 6400kg, connected load: 11kW, weight: approx. 4900kg. An on-site inspection is possible. Dodow R Dgzspfx Ab Uocf

Year of construction: 1990, condition: ready for operation (used), With dielectric, fully automatic water treatment system with ion exchanger, filtration system, clamping system with generator and adaptive discharge unit for precise machining, cooling and hydraulics, external pump and filtration systems. Without documentation, maintained internally, pneumatic hoses have been renewed, the machine has not been in operation since 2022 but was last functional. A clamping system is optionally available. An on-site inspection is possible. Djdpsw S Tygjfx Ab Uecf