Used Doosan Compressors for sale (264)

Condition: new, The unit is NEW, complete with controls, diesel tank, exhaust and batteries. Net price: € 39980 Gross price € 47576.12 Technical specifications Engine : Doosan & P126TI-II, 6 cylinder, water-cooled, turbocharged Generator: Newpower NW/N 330 Continuous power: 240 kW / 300 kVA Maximum power: 264 kW / 330 kVA Control system: Deep Sea DSE 7320 Connection: direct connection (Optional circuit breakers, outlets, automatic transfer switch.) Frequency : 50 Hz & 3-phase Voltage: 400/230V RPM : 1500 rpm. Gjdeilfltspfx Am Asbr Dimensions (LxWxH): 3960x 1356x2167mm Weight: 3200 kg Network monitoring, soundproof Shipment: - Worldwide transport is available at an additional cost - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: new, The unit is NEW, complete with controls, diesel tank, exhaust and batteries. Net price: € 39980 Gross price € 47576.12 Technical specifications Engine : Doosan & P126TI-II, 6 cylinder, water-cooled, turbocharged Generator: Newpower NW/N 330 Continuous power: 240 kW / 300 kVA Maximum power: 264 kW / 330 kVA Control system: Deep Sea DSE 7320 Connection: direct connection (Optional circuit breakers, outlets, automatic transfer switch.) Frequency : 50 Hz & 3-phase Voltage: 400/230V RPM : 1500 rpm. Dimensions (LxWxH): 3960x 1356x2167mm Weight: 3200 kg Network monitoring, soundproof Gbjdpfx Aonkcaajm Asr Shipment: - Worldwide transport is available at an additional cost - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: used, Year of construction: 2017, operating hours: 524 h, load capacity: 3,000 kg, lifting height: 4,760 mm, free lift: 1,690 mm, fuel type: gas, mast type: triplex, construction height: 2,180 mm, drive type: Treibgas, Internal combustion forklift Mast type: Triplex Transmission: Automatic Front tire type: Superelastic Front tire size: 650-10 Gedpfjyfy Ahox Am Ajbr Rear tire type: Superelastic Rear tire size: 28x9-15 Power steering; Windshield wiper; Operating weight with attachment: 4798 kg

Condition: like new (used), Year of construction: 2020, operating hours: 4,300 h, functionality: fully functional, spindle motor power: 15,000 W, spindle speed (min.): 6,000 rpm, spindle speed (max.): 6,000 rpm, rotational speed (max.): 6,000 rpm, feed length X-axis: 135 mm, feed length Z-axis: 530 mm, bar passage: 51 mm, feed rate X-axis: 30 m/min, feed rate Z-axis: 40 m/min, chuck outer diameter: 152 mm, bar diameter (max.): 51 mm, overall weight: 8,100 kg, Equipment: documentation/manual, We offer this DOOSAN PUMA TT1300SYYB CNC turning and milling center, in like-new condition, manufactured in 2020. Manufacturer: DOOSAN Model: PUMA TT1300SYYB Year of manufacture: 2020 Condition: Like new Category ID: 1128 Type ID: 2239 Machine type: CNC turning and milling center If you have any questions or need more information, please do not hesitate to send us a message or call us. A nearly new DOOSAN PUMA TT1300SYYB from February 2020 is for sale, with the option to purchase an LNS SPRINT 565 S2 automatic bar feeder for an additional €20,000. It has 6 motorized tool holders (3 axial and 3 radial) and only 3,800 cutting hours. This is a high-end, multitasking CNC lathe with a double spindle and double motorized turret with a double, independent Y-axis in both positions. A unique machine in its category, designed for complete machining in a single setup. -Synchronized double spindle -Double turret with motorized tools -Upper and lower Y-axis (SYYB configuration) -Simultaneous machining of both sides -Drastic reduction of cycle times -High precision and thermal stability Gjdpfxoyryyms Am Aebr -Spindle speed up to 6,000 rpm -Bar capacity up to Ø51 mm -2 Hainbuch tool holders Special price: 140,000 EUR, WORKING HOURS: ONLY 3,800 CUTTING HOURS. Available for inspection and operational testing. Simultaneous machining with two turrets. Automatic transfer between main and sub-spindle. Possibility of completing the entire part in a single operation. Ideal for use with a bar feeder. Significant reduction in cycle times compared to a single-spindle lathe.

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 3,955 h, load capacity: 2,500 kg, lifting height: 4,750 mm, fuel type: diesel, mast type: triplex, construction height: 2,190 mm, power: 43 kW (58.46 HP), drive type: Diesel, Diesel forklift Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Gbedpfx Aozngxmom Ajr Front tire type: Solid rubber Front tire condition: 80 - 100% Rear tire type: Solid rubber Rear tire condition: 60 - 80% Description: DOOSAN D25S-5 diesel forklift - - 2.5 ton lifting capacity - - Year of manufacture 2015 - - Side shifter - - Triplex free-lift mast - - Overall height 2.19 m - Lifting height 4.75 m - - 3955 operating hours according to meter - - 4-cylinder YANMAR diesel engine, 58 hp - - Solid rubber tires, front approx. 90%, rear approx. 80% - - Half cab, lighting system - - Simple and mechanical forklift - - Good condition - - - Delivery possible! Side shifter, 3rd valve, rear work light, front work light, windshield, half cab, CE certificate.

Condition: good (used), Year of construction: 2013, Traverses XYZ: 762 x 435 x 510mm, table size 920 x 435mm, ISO40 spindle taper, spindle speed 12000 rpm, FANUC i Control, spindle motor power 15kW, 30 station ATC with side arm, Godpfszhwg Uox Am Ajbr Through Spindle Coolant, Low Volt Light, Swarf conveyor

Condition: good (used), Year of construction: 2011, 850mm Swing, 525mm Max Cutting Diameter, 1310mm max turning length, 10 Station Turret, 102mm bar capacity, Gbodpfxozhwghs Am Aor 2800rpm 22kW Spindle, Fanuc I series, 3 jaw chuck, Low Volt Light, Tailstock,

Condition: excellent (used), Year of construction: 2020, operating hours: 4,000 h, functionality: fully functional, CNC turning center Doosan Puma 700 XLY II Turning length: 5,050 mm Turning diameter: 700 mm with driven tools and Y-axis Basic equipment: - CNC control Fanuc 0i with Manual Guide i - 45" inclined bed in tubular construction - Main spindle with 4 bearings. Spindle bearing accuracy class P 4 - Lifetime lubrication - Internal clamping device hydraulically actuated with internal clamping cylinder complete with safety device, coolant collection tray, stroke control and draw rod - Automatic central lubrication - Tailstock programmable - Flat bed guides hardened and counter surface coated with Rulon 142 - Coolant system with 7 bar delivery pressure - Guide rail cover Z-axis - Full enclosure - Watertight work area lighting - Integrated alignment screws and mounting plates Gsdjzlcyuspfx Am Asbr Including Doosan options: - Tailstock programmable (towed by the turret) - Oil skimmer - Coolant system with 14 bar delivery pressure - Electronic tool breakage monitoring - Automatic tool measuring arm - 3-color warning light - Clamping force monitoring - Additional handwheel - NC option Arbitrary Speed Threading - 2x Drilling & Milling head BMT 85 CC PRECI-FLEX; straight ER50 - 2x Drilling & Milling head BMT 85 CC PRECI-FLEX; angled ER50 - Preparation for programmable hydraulic steady rest (includes complete basic body, connected to open/close the steady rest via M-function and the basic body can be automatically positioned in the Z-direction, towed by the cross slide without the steady rest) Schunk ROTA NC 630-180 2520-Sv90" Chuck diameter 630 mm Manufacturer Schunk with involute gearing 90" incl. flange and draw rod adapter Steady rest RX6-ZSW-100520 50-SCUW-95 self-centering, hydraulic steady rest, sealed housing (proofline), measuring system for clamping range monitoring (SCU-V), integrated flushing channels / chip protection, flushing nozzles, extra compact design, integrated cylinder with pressure converter. Clamping range from 100mm to 520mm Brinkmann pressure boosting pump 30 bar incl. 50p Mahle filter approx. 30 bar, can be switched on via M-function incl. cartridge filter Coolant gun with its own pump Coolant gun for cleaning the work area when the door is open In automatic operation without function Hinged belt chip conveyor, discharge on the right, inclination angle 50 degrees, discharge height 1150 mm Chip cart Type SKM750; 0.75m3 volume; 1000kg load capacity; with rollers and forklift pockets

Condition: used, power: 127 kW (172.67 HP), fuel tank capacity: 255 l, color: orange, lifting height: 2,750 mm, Year of construction: 2014, operating hours: 6,540 h, Empty weight: 14.400 kg Dimensions (LxBxH): 772 x 264 x 328 cm Engine type: Doosan Doosan DL06K Tier IIIB Gbsdpfx Aoy Takijm Asr Bucket volume: 2.5 m^3

Condition: used, Year of construction: 2023, operating hours: 1,773 h, 2023 | Doosan DX225LC-5 | Used Tracked Excavator | 1773 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 140000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Gbjdpfozkuk Nox Am Aer 👷‍♂️ Inspected by an independent expert 67 inspection points 67 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine with very few hours, in very good condition, no issues. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40971 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2021, operating hours: 2,348 h, 2021 | Doosan DX225LC-5 | Used Tracked Excavator | 2348 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 120000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 67 inspection points 66 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine in very good condition. Few hours and the track is almost new. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41033 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available Gbsdpfxszkuakj Am Aer ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2015, turning diameter 210 mm turning length 1000 mm control Fanuc 31i max. turning speeds 5.000 min/-1 drive capacity - main spindle 15 kW max. torque 476 Nm bar passage 65 mm x-axis 250 mm z-axis 1050 mm x2-axis 150 mm z2-axis 1030 mm spindle hours ca. 700 h accessories: Lünette, Späneförderer In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Technical details: - approx. 500 spindle hours Accessories: - Steady rest - Chip conveyor Accessories, tools and clamping devices shown are only included in the scope Gbjdexq R Evspfx Am Aor of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: ML0377-000140, turning length: 1,280 mm, turning diameter: 376 mm, spindle bore: 780 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 1,350 mm, spindle motor power: 22,900 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (min.): 200 rpm, turning diameter over bed slide: 780 mm, type of input current: three-phase, We offer this Doosan PUMA 2600LY II CNC turning and milling center in like-new condition, manufactured in 2020. The machine has not been put into operation and has not been turned on since it was new. Power-on time: 0 Godpfx Amoy Nmdno Aebr Model: PUMA 2600LY II Serial number: ML0377-000140 Supply voltage: 380 V Number of phases: 3 Frequency: 50/60 Hz Rated power: 49.06 kVA Interrupting capacity: 5 kA Current at full load: 74.65 A Short-circuit capacity: 10 kA Circuit diagram version: P210SYH840A07 Weight: 7400 kg Date of manufacture: 2020-11 - Hydraulic chuck 255 mm (10”) – 3-jaw, with a set of soft jaws and a set of hard jaws - Hydraulic unit - Coolant system with a high-pressure pump (min. 7 bar) - Box guideways for all axes – induction hardened - Slant bed (min. 30°) - Work area lighting - Front door safety switch - Leveling pads - Color monitor - Conversational/Graphic programming support - Turret (min. 12 stations) - Tool holder kit: min. 2 straight driven holders; 2 angular driven holders; 8 static holders for drills and boring bars - Full telescopic covers for guideways - Full machine enclosure - Programmable tailstock (MT5 center) - 3-color status light (stack light) - Automatic tool presetter / tool probe - Tool monitoring system - Electrical filter - Bar feeder interface - Automatic parts catcher and parts box - Thermal compensation function - Direct drive spindle - Spindle speed: min. 4000 RPM - Built-in network card (Ethernet) - USB port - Hinged belt-type chip conveyor - Oil skimmer - Toolbox - Radial driven tool holder x2, Axial driven tool holder x2 If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: good (used), Year of construction: 2012, 300mm max cutting diameter, 510mm mm max turned length, 51mm bar capacity, 11kW motor, Spindle speed 6,000 rpm, milling speed 6,000 rpm, sub-spindle speed 6,000rpm, C axis 0.001 degrees, Fanuc oi-Series Control, Gbsdszg Eb Dspfx Am Aor 3 Jaw Chuck, Tool setter, 12 Station turret, parts catcher, parts conveyor

Condition: good (used), Year of construction: 2009, Parts shown by hand not come. Technical data shown on pictures. Godpfxjzk I R As Am Aobr

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, x-axis travel 520 mm y-axis travel 360 mm z-axis travel 350 mm Spindle speed 12,000 rpm Spindle-to-base distance min./max. 150 - 500 mm Table surface 650 x 375 mm Tool weight max. 2.8 kg Table load 2 - 200 kg Control system Fanuc i Machine weight approx. 5,200 kg Dimensions 3,230 x 1,620 x 2,507 mm Equipment/Accessories: - Rigid tapping – thread drilling without a compensation chuck - 14-position tool magazine (T3600D) - Speed range 12,000 rpm - Spindle speed and power display - Telescopic covers in the X, Y, and Z axes - Rapid traverse rates in the X, Y, and Z axes - Door safety switch - 3-color indicator light Gbedezk D Dfjpfx Am Aer - Work area lighting - Coolant supply from the 200 l tank via adjustable coolant nozzles on the spindle nose - usable table load of 2 x 200 kg - 21-position tool magazine - Internal cooling - Machine cover, closed top / top cover - Oil skimmer - Pneumatic clamping, 1 pair per pallet - Automatic work area door with safety strip - Coolant system, delivery pressure 4.5 bar Operating hours: 14,317 h

Condition: good (used), Year of construction: 2014, 900mm Swing, 650mm max. machining diameter, Godpfowwtrbox Am Ajbr 992 mm maximum turning length, 1000rpm spindle, Spindle bore 275mm, 10 station turret 45kW spindle motor, FANUC Series 32i control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant,

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, turning diameter over cross slide: 300 mm, turning length: 510 mm, spindle bore: 51 mm, spindle speed (max.): 6,000 rpm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, torque: 127 Nm, bar passage: 50 mm, chuck outer diameter: 152 mm, Equipment: documentation/manual, rotational speed infinitely variable, Machine used in custom and small-batch production, operating in a single shift. Gjdpfxozcmmnj Am Aobr Excellent condition, producing parts with an accuracy of 0.01mm since its initial use. C-axis, driven tool positions in the turret, BMT connection. Programmable steady rest. Equipped with a chip conveyor and oil mist extractor. Comes with original documentation. High-rigidity roller linear guides: The robust roller guides used on the X and Z axes minimize vibration and dramatically reduce machining time. The price includes the 1.5m bar feeder shown in the picture; it can also be purchased separately if required.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CNC Fanuc Series Godpfx Aoyiu Dnjm Ajbr Max. turning diameter on the machine bed: 780 mm Max. turning diameter on the carriage: 630 mm Max. turning diameter: 406 mm Max. turning length: 520 mm Bar passage: 65 mm Spindle nose: ASA A2-6 Spindle bore: 52 mm Spindle speed: 5000 rpm Spindle motor power: 18.5 kW Tailstock bore: 45 mm Tailstock nose: ASA A2-5 Bellegrandi tool holders on the spindle and tailstock + 2 self-centering chucks X-axis travel: 260 mm Z-axis travel: 590 mm Y-axis travel: +102 - 51 mm B-axis travel: 590 mm Rapid traverse rate for X/Z/B axes: 30 m/min Rapid traverse rate for Y-axis: 10 m/min Turret type: BMT Number of turret stations: 12 Rotation speed of powered tools: 5000 rpm Dimensions: 3530x1863 mm, H=2163 mm Weight: 5900 kg No. 10 tool holders for powered tools.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 146 h, load capacity: 2,000 kg, lifting height: 4,500 mm, free lift: 1,210 mm, fuel type: electric, mast type: triplex, construction height: 2,160 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 Fork width: 100 mm Fork thickness: 40 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Electromechanical Condition: Like new Technical condition: very good Front tire type: Superelastic Gbsdpfjtl Hzdex Am Aor Front tire size: 6.50-10 Rear tire type: Superelastic Rear tire size: 5.00-8 Battery voltage: 48V Battery capacity: 500Ah Battery manufacturer: GNB Battery year of manufacture: 2023 Side shifter, 3rd valve, 4th valve, rear work light, front work light, overhead guard, windshield, load guard, full free lift, safety light, multi-directional control lever, single-pedal operation.

Condition: used, Year of construction: 2023, operating hours: 487 h, fuel type: diesel, motor manufacturer: D34, Field of application: Construction Empty weight: 1.772 kg Generator capacity: 60 kVA Dimensions of cargo space: 242 x 101 x 182 cm Gsdoznhncjpfx Am Aebr Frequency: 50 Voltage: 230 Water tank volume: 285 l Please contact Sales Department for more information Over 80 years experience in maintenance. Expert that jointly reflects on the ideal solution for your situation. 1,000 hours or one-year guarantee: optimal reliability. Available 24/7. Quickservice. We can always supply a replacement generator. Wide range of stock that can be supplied immediately.

Condition: used, Year of construction: 2022, functionality: fully functional, DOOSAN PUMA GT 3100 M – UNUSED, PRE-OWNED MACHINE WITH ROBOT CELL A Doosan Puma GT 3100 M, manufactured in 04/2022, which has never been used in production after commissioning by the supplier (February 13, 2023). 0 production hours, no workpiece contact, technically and visually in new condition. Includes a factory-installed robot cell for automated loading. Origin: Liquidation of a user's operations in the Nuremberg area. On-site or video call inspection possible. KEY FEATURES - 12″ main spindle, high power and high torque for steel and stainless steel machining - Driven tools VDI40/BMT 65P, milling, drilling and threading from the turret, complete machining in a single setup - Programmable tailstock with servo drive (Z2 axis) - Siemens Sinumerik 828D with 15″ touchscreen and ShopTurn workshop programming - 30° inclined bed, FEM optimized, cast iron - Halter LoadAssistant Universal Big 70 robot cell, mounted and ready for operation (see photos) Gbsdpfx Aozi Da Rem Ajr FACTORY-INSTALLED SPECIAL EQUIPMENT (installed on the machine) - 24-tool turret BMT 65, Hirth gearing (1 s/position) - Automatic tool measuring arm (tool setter) - Tailstock programmable, hydraulic clamping, mount for rotating center - Auto-power-off after program end - Automatic door with servo drive - Three-jaw power chuck Ø 305 mm (12″) with hydraulic draw-in mechanism - 3x Eppinger driven tool holders (drilling/milling head, VDI40/BMT 65) - LNS hinged belt chip conveyor and LNS Turbo HB coolant filtration system - Dormatec ADF oil mist extraction system (filter level 99.97 %, 65 dB) - 20 kVA transformer separately wired - Absolute encoder on all axes HALTER LOADASSISTANT UNIVERSAL BIG 70 (Automation) A Halter robot cell with a Fanuc six-axis robot M-710iC/70 is mounted on the machine (see photos: robot arm with Halter lettering directly on the machine). Cell equipment: - Fanuc robot M-710iC/70, payload up to 70 kg - Workpiece placement via rotary table/loading tray - Workpiece-specific grippers for loading the main spindle - Safety enclosure The cell is designed for this machine and is ready for operation, eliminating the need for additional investment in automation. CONDITION Used machine, unused, no operating hours since installation at the original buyer. Sold "as is", warranty excluded (used machine). Inspection recommended before placing an order. OUR SERVICE On-site or online inspection in the Nuremberg area, transport, installation and commissioning as a separate package upon request, direct German-speaking contact person for spare parts and support, financing possible via leasing/hire-purchase partners, member of the FDM, the German trade association for wholesale trade in machinery and tools. Since this is a single unit, subject to prior sale. Call or write to us, and we will arrange an inspection appointment as soon as possible.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 19,865 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: FANUC, controller model: Series 31i-model B, total height: 3,422 mm, total width: 7,297 mm, table load: 1,500 kg, overall weight: 18,000 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 40, tool weight: 30,000 g, product length (max.): 3,780 mm, number of axes: 4, This 4-axis DOOSAN NHP6300 was manufactured in 2014. It features an impressive X-axis travel of 1,050 mm, Y-axis travel of 900 mm, and Z-axis travel of 1,000 mm. The machine includes a maximum pallet load of 1,500 kg and a tool capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the DOOSAN NHP6300 horizontal machining centre we have for sale. Contact us for further details. • Distance from top of pallet to spindle center: 100–1,100 mm • Distance from pallet center to spindle nose: 75–975 mm • Pallet • Type: Indexing (rotary) • Indexing angle: 1° • Size: 630 × 630 mm • Maximum load: 1,500 kg • Mounting pattern: 24 × M16 × P2.0 {5–18H8} • Maximum workpiece size (Ø × H): Ø1,050 × 1,350 mm • Spindle • Speed: 10,000 rpm (options: 6,000 / 15,000 rpm) • Taper: ISO 50 (7/24 taper) • Maximum torque: 489 Nm (options: 599.8 / 350 Nm) • Feed rates • Rapid traverse (X/Y/Z): 60 / 60 / 60 m/min Gsdpfjzh Hpfjx Am Ajbr • Maximum cutting feed: 30,000 mm/min • Automatic Pallet Changer (APC) • Number of pallets: 2 • Type: Rotary shuttle • Change time: 12 s • Drive: Servo motor • Automatic Tool Changer (ATC) • Tool interface: BT / CT / DIN (HSK optional) • Magazine type: Chain • Standard capacity: 40 tools (options: 60 / 90 / 120 / 150) • Matrix magazine capacity: 196 / 256 / 316 / 376 tools • Maximum tool diameter: Ø130 mm (Ø125 mm per note) • Maximum tool diameter with adjacent pockets empty: Ø320 mm • Maximum tool length: 630 mm (HSK: 700 mm) • Tool-to-tool change time: 2.0 / 3.5 s • Chip-to-chip change time: 5.0 / 6.5 s • Motor power and utilities • Spindle motor: 25 / 30 kW (options: 22 / 30, 50 / 55 kW) • Compressed air supply: 0.54 MPa • Tank capacities • Coolant: 925 l • Lubrication: 7.2 l Additional equipment • Fastems automation system Technical Specification Taper Size ISO 50

Condition: excellent (used), Year of construction: 2022, operating hours: 4,605 h, functionality: fully functional, Controller: FANUC 31i-B5 Max. turning diameter: ø540 mm Max. turning length: 1.020 mm Spindle bore / bar capacity: ø76 / 65 mm Y-axis travel: 170 mm (±85) Milling spindle: 12.000 rpm, 18.5 kW Gbodpfx Ajzilupem Aer Tool magazine (ATC): 80 stations, Capto C6 Tool change time: 2.0 s Counter spindle: 5.000 rpm, 22 kW Spindle power: 22 / 18.5 kW (S1/S6)

Condition: used, Year of construction: 2008, turning length: 978 mm, turning diameter: 560 mm, spindle bore: 117 mm, spindle speed (max.): 2,000 rpm, Doosan Puma 400MB 3-axis CNC lathe C-axis driven tooling Year: 2008 Fanuc 21iTB with Manual Guide Max turning diameter: 560mm Gbodpfszk Hikox Am Aer Max turning length: 980mm Z-axis travel: -1100mm Chuck diameter: 380mm Spindle bore: 116.5mm Max spindle speed: 2000 rpm Spindle gearbox: low gear, high gear 12-tool turret, BMT 75 Measuring probe Tailstock Chip conveyor with sump and pump Documentation