Used Doosan Compressors for sale (256)

Condition: used, Year of construction: 2012, weight max. in kg 1500 kg serial number FGA04-1290-00480 drive Treibgas weight 2800 kg Fedeztfyyspfx Al Uepn length in width 940 mm ca. 2.060 mm (je nach Mas engine output ca. 34 kW kW cubic capacity 1.975 cm³ ccm

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, turning length: 1,540 mm, turning diameter over cross slide: 1,000 mm, turning diameter: 670 mm, spindle motor power: 30 W, spindle speed (min.): 30 rpm, spindle speed (max.): 3,000 rpm, spindle bore: 102 mm, travel distance X-axis: 630 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,585 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 26 m/min, rapid traverse Z-axis: 36 m/min, rotational speed (max.): 12,000 rpm, rotational speed (min.): 60 rpm, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​7-axis multitasking CNC turning center “DOOSAN model PUMA MX3100S” with orientable upper head equipped with tool changer, opposing spindles and Fanuc 31i-MB5 CNC. Fedpfx Alswdg Ato Uspn

Condition: used, Year of construction: 2012, machine/vehicle number: MB0001-000031, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed length Y-axis: 6 mm, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller manufacturer: FANUC, controller model: 32i Model A, workpiece diameter (max.): 2,550 mm, workpiece weight (max.): 7,000 kg, total height: 4,200 mm, total length: 5,540 mm, total width: 5,930 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 29,000 kg, spindle speed (max.): 3,000 rpm, distance table center to spindle nose: 1,750 mm, spindle motor power: 26 W, spindle nose: BT50, number of slots in tool magazine: 60, tool length: 600 mm, tool diameter: 250 mm, tool weight: 30 g, B Axis: 1 degree Control: FANUC 32i-Model A Distance from Spindle Nose to Table Top: 0 - 1500mm Distance from Spindle Nose to Table Centre: 550 - 1750mm Machine Dimensions: 5540 x 5930 x 4200mm Machine Weight: 29000kg Maximum Cutting Feedrate: 6m/minute Maximum Tool Diameter: 250mm Maximum Tool Length: 600mm Fpsdpoxm Sxvsfx Al Uon Maximum Tool Weight: 30kg Maximum workpiece weight: 7000kg Rapid Feedrates: WXYZ: 6 x 12 x 12 x 12m/minute Spindle Diameter: 110mm Spindle Motor Power: 26/22kW Spindle Speed: 3000rpm Swing: 2550mm Table Size: 1400 x 1600mm Tool Change Capacity: 60 Station Tool Size: BT50 Traverses XYZ: 2000 x 1500 x 1200mm W Axis: 500mm Coolant, Low Volt Light, Swarf Conveyor, Long Reach Right Angled Milling Head, Tool Length Measurement Probe, Renishaw Work Probe, Fully Enclosed machine guards.

Year of construction: 2016, condition: ready for operation (used), - USED - 7-AXIS TWIN-SPINDLE CNC LATHE MAX ROTATING DIAMETER: 800 mm MAX TURNING LENGTH: 350x2 mm MAX TURNING DIAMETER: 300 - 390 mm BAR CAPACITY: 76 mm SPINDLE: 3500 rpm; 22-26 kW; ASA A2-8 COUNTER SPINDLE: 3500 rpm; 22-26 kW; ASA A2-8 X1-AXIS TRAVEL: 255 mm X2-AXIS TRAVEL: 190 mm Y-AXIS TRAVEL: ± 60 mm Z1-AXIS TRAVEL: 800 mm Z2-AXIS TRAVEL: 900 mm RAPID FEEDS X-Y-Z: 20 - 7,5 - 24 m/min DRIVEN TURRET HEAD: 12 ; 12 POS; 4000 ; 4000 rpm; 5,5 ; 5,5 kW CONTROL UNIT: FANUC 31i-B WEIGHT: 12700 Kg Fpodjyyd Ulepfx Al Usn OVERALL DIMENSIONS: 4050 x 2210 x 2480 mm ACCESSORIES: SWARF CONVEYOR ; PIECE CONVEYOR ; TOOL SETTER

Condition: used, Year of construction: 2018, travel -x axis 1.050 mm travel -y axis 570 mm travel -z axis 510 mm control HEIDENHAIN - TNC620 number of spindle speeds 12.000 U/min tool taper BT 40 table dimension (L x W) 1300 x 570 mm numbers of positions in the tool changer 30 Milling machining centers - vertical | DOOSAN - DNM 5700 equipped with 30-way tool changer, ITC cooling system and chip conveyor. The machine only has 13.600 spindle hours. The machine is in a well-maintained condition and has exclusively worked on Aluminum and Plastics. The machine video from the production plant will be shared on request. Fpodpew Dgcaefx Al Uen Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM5700 | DNM-5700

Condition: good (used), Year of construction: 2011, 850mm Swing, 525mm Max Cutting Diameter, 1310mm max turning length, 10 Station Turret, 102mm bar capacity, 2800rpm 22kW Spindle, Fpsdpjzhwghjfx Al Uon Fanuc I series, 3 jaw chuck, Low Volt Light, Tailstock,

Condition: used, Year of construction: 2017, operating hours: 6,700 h, Year of manufacture: 2017 Empty weight: 23.500 kg Dimensions (LxBxH): 898 x 299 x 308 cm Fsdpfsy Nwudjx Al Ujpn Track width: 60 cm Digging depth: 10.795 m = Additional options and accessories = - Central lubrication

Condition: excellent (used), Year of construction: 2007, Doosan Puma 300MC C-axis with driven tools, 360° (0.001°) Year: 2007 Fanuc 21iTB with Manual Guide Fedpfxeyrb Urj Al Ujpn Chuck: 12 inch (315mm) Samchully Spindle bore: 102mm Max turning diameter: 355mm Axis travels: X - 250mm Z - 680mm Turret: BMT 65 Tailstock Tool probe Chip conveyor, coolant tank with pump Tool holders Machine documentation Condition: very good

Condition: excellent (used), machine/vehicle number: FRAOF-1380-00038, Year of construction: 2014, operating hours: 5,170 h, lifting height: 8,720 mm, free lift: 3,000 mm, fuel type: electric, mast type: triplex, battery manufacturer: TAB, battery capacity: 750 Ah, battery voltage: 48 V, fork length: 1,150 mm, Battery: 750 Ah, 48 V, Year of manufacture 2017, Brand of battery TAB Lifting capacity: 1.600 kg Maximum passing height: 345 cm CE mark: yes Technical condition: very good Fjdswdvz Espfx Al Ujpn Visual appearance: very good Fork carriage: Sideshifter Latest inspection: 2025-04-09 Please contact Johanny Hendrikse for more information

Condition: excellent (used), machine/vehicle number: JK-00316, Year of construction: 2009, lifting height: 4,700 mm, free lift: 1,620 mm, fuel type: electric, mast type: triplex, battery manufacturer: R&W, battery voltage: 80 V, fork length: 1,200 mm, Lifting capacity: 3.000 kg Maximum passing height: 222 cm CE mark: yes Technical condition: very good Visual appearance: very good Fsdpox Itf Aefx Al Uepn Fork carriage: Sideshifter Latest inspection: 2025-11-03 Please contact Johanny Hendrikse for more information

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1300 x 650 x 510mm, Fpedpfx Alox Dk Dlj Usn Table 1200 x 540mm, Spindle speed 12,000rpm, BT40 spindle taper, Spindle Motor 17kW, FANUC Oi Control, 30 Station ATC, Low Volt light, Through Spindle Coolant

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 250 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 580 mm, overall weight: 4,850 kg, controller manufacturer: FANUC, number of axes: 5, This 5-axis DOOSAN PUMA 2000SY was manufactured in 2006. It features a sub-spindle and a Y-axis for enhanced machining capabilities. The machine includes a bar feeder and 10 motorized driven tool holders, providing versatility for various applications. With a total operating time of 8836 hours, this horizontal turning machine represents a valuable opportunity for high-quality turning capabilities. Reach out for further details regarding this machine. • Y-Axis: Included • CNC Total Operating Hours: 8836 hours (THP LAV) • Electrical Power Supply: AC 380/400V, 3-Phase, 50/60 Hz • Nominal Capacity: 50.71 kVA / 11.0 kW • Maximum/Full Load Current: 73.20 A • Interruption Current: 9000 A Additional equipment • TOP Automazioni bar feeder • Chip conveyor • Parts catcher / conveyor output belt • Hydraulic unit Fpjdpfx Alezzn U Ae Ujn • USAG tool trolley • Driven tool holders: 10 motorized modules / driven tools Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 2015, DOOSAN G30 Generator Set – Machine after full service! Technical data: Power: 31 kVA (25 kW); Year of manufacture: 2015; The generator is fully operational, ready for work, with warranty. Net price: PLN 26,500 Gross price: PLN 32,595 Fpsdpfsylifrox Al Ujn Below you will find a link to a video showing the machine in operation.

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, turning length: 2,129 mm, turning diameter: 550 mm, spindle motor power: 26 W, spindle speed (min.): 30 rpm, spindle speed (max.): 3,000 rpm, spindle bore: 90 mm, travel distance X-axis: 362 mm, travel distance Z-axis: 2,155 mm, rapid traverse X-axis: 16 m/min, rapid traverse Z-axis: 18 m/min, type of input current: three-phase, total height: 2,305 mm, total length: 5,550 mm, total width: 2,300 mm, overall weight: 9,800 kg, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​DOOSAN 2-Axis lathe with FANUC 21i-TB CNC Fpodpfox Sqwwex Al Uen

Condition: excellent (used), Year of construction: 2016, CNC FANUC 0i - TC Axes X, Y, Z: 1630, 762, 650 Rapid traverse X – 30, Y – 30, Z -24 m/min Fedpfx Aloqzhfxj Uspn Table size 1630 x 760 Usable table load of 1300 kg Spindle cone SK40 Spindle speed 12,000 rpm Tool magazine 30 Chip tank Linear guides in all axes (roller guided) Coolant nozzles on the spindle nose Electronic handwheel (transportable) for 3 axes 3 colors signal light Accesories Coolant system with pumps, spindle cooler, handwheel, transformer & 1x set of documentation

Condition: good (used), machine/vehicle number: 17338, Year of construction: 2022, operating hours: 667 h, load capacity: 3,000 kg, lifting height: 4,710 mm, free lift: 1,475 mm, load center: 500 mm, fuel type: gas, mast type: triplex, construction height: 2,170 mm, fork length: 1,200 mm, front tire size: 28x9-15 Solideal Magnum, rear tire size: 6.50-10 Solideal Magnum, overall weight: 4,641 kg, Equipment: 3rd hydraulic function, 4th hydraulic function, cabin, enginetype: LP Gas, manufacturer: Doosan Fodozwa R Uepfx Al Uepn Serial Number: FGA26-4030-00257

Condition: used, functionality: fully functional, machine/vehicle number: 0032, Year of construction: 2016, operating hours: 4,000 h, load capacity: 4,500 kg, lifting height: 4,700 mm, free lift: 1,825 mm, fuel type: diesel, mast type: triplex, construction height: 2,325 mm, drive type: Diesel, Diesel forklift Chassis number: 0032 Fpodey Up Itjpfx Al Uon Mast type: Triplex Gearbox: Automatic Technical condition: very good Side shift, 3rd valve, 4th valve,

Condition: used, Year of construction: 2014, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, Doosan HP5100II Horizontal Machining Center Year of manufacture: November 2014 Control: Fanuc 31i Travels: X-axis: 850 mm Y-axis: 700 mm Z-axis: 750 mm Fsdpfsx Sq Uvex Al Uepn B-axis: 0.001° Automatic pallet changer Table: 500x500 mm Spindle max. 14,000 rpm Spindle taper: BT40 Tool magazine for 60 tools Renishaw workpiece measuring probe Chip conveyor Through-spindle coolant (IKZ)

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 4,527 h, load capacity: 1,500 kg, lifting height: 5,000 mm, free lift: 1,700 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,860 mm, gearing type: automatic, fork length: 1,200 mm, overall weight: 3,335 kg, empty load weight: 1,500 kg, total height: 2,350 mm, maximum load weight: 1,500 kg, fuel: electricity, Equipment: lighting, pallet forks, sideshift, New price: 11,900 EUR / Previous price: 14,900 EUR Lithium-ion battery. Forklift in perfect condition. We sell forklifts after comprehensive servicing. Prepared for end users. We can arrange transport within Europe and worldwide. Fpodpfx Aoy Hvtmjl Ujn ===== WhatsApp in English WhatsApp auf Deutsch WhatsApp en français WhatsApp на французском языке ===== We are a company specializing in 4-way forklifts, side loaders, and counterbalance forklifts. Our qualified specialists have over 20 years of experience in the forklift and construction machinery sector. We employ the best mechanics in the forklift industry in Poland and have many satisfied customers across Europe. We also manufacture EPAL EUR pallets, renowned for excellent quality and timely delivery. Each machine is thoroughly tested and undergoes a full service inspection before delivery. All necessary repairs are completed. The customer receives a forklift ready for immediate use. In Poland, at the customer's request, we can arrange official acceptance of the machine by the State Office of Technical Inspection (UDT). Our main goal is to satisfy our customers and solve their logistical challenges. We know how to prepare machines so our clients are fully satisfied and recommend us to others. Please feel free to contact us and take advantage of our services. Need a forklift supplier? Contact us.

Year of construction: 2006, condition: ready for operation (used), A Doosan CNC lathe is available. Turning diameter: 300mm, turning diameter over bed/face slide: 550mm/390mm, max. turning length: 510mm, travel path X/Z: 205mm/580mm, rapid traverse: 24m/min, C-axis: 360°, bar capacity: 65mm, spindle bore: 76mm, speed: 4500rpm, tool stations: 12. Machine dimensions X/Y/Z: approx. 3500mm/1650mm/1800mm, weight: approx. 4250kg, control: Fanuc Series 18i-TB. Documentation vorhanden. An on-site inspection is possible. Fpodpfxeyvuvxs Al Usn

Condition: used, machine/vehicle number: 26412, Year of construction: 2016, operating hours: 9,925 h, load capacity: 5,000 kg, lifting height: 4,690 mm, free lift: 1,410 mm, fuel type: diesel, mast type: triplex, construction height: 2,317 mm, Equipment: cabin, .: 26412 Equipment details: Year of manufacture: 2016 Load capacity: 5,000 kg Lifting height: 4,690 mm Read operating hours: 9,925 h Free lift: 1,410 mm Mast type: Triplex Mast height: 2,317 mm Length/Width/Height: 3,300 / 1,460 / 2,185 mm Operating weight: 7,550 kg ---- Features: * Overhead guard * 3rd valve * 4th valve * Full cab * Heater * Front working lights * Rear working lights Fodpeyg Df Aofx Al Uopn ---- Further equipment information: ---- Operating hours are generally read off the display. We are happy to offer you suitable transport. Another 250 - 300 forklifts, attachments, and sweepers immediately available for you. Of course, also for rent! We are also happy to buy your OLD one. Do you have any questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak English. Interim sale and errors for this offer are expressly reserved. For dealers, the equipment is sold as-is, not refurbished. All information subject to change and errors excepted.

Condition: good (used), Year of construction: 2009, control FANUC 18i-TB Control x-axis 0 mm z-axis 0 mm spindle taper 0 number of spindle speeds 0 engine output 0 kW weight of the machine ca. 8.200 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m DOOSAN PUMA TL 2500LM with IFS extraction system, multi-turret turning centres for shaft machining The PUMA TL series stands out thanks to its innovative design, featuring both upper and lower turrets. This advanced configuration makes it the ideal choice for the demanding machining of shafts, such as camshafts and crankshafts. Thanks to the capability for simultaneous 4-axis machining, complex machining processes can be carried out precisely, efficiently and in a single operation. --> Technical Specifications Mains connection: AC 200/220 V, 3-phase with earth, 50/60 Hz --> Rated power: 52.33 kVA --> Max. connected load: 22.0 kW --> Full-load current: 137.33 A --> Short-circuit current: 33.0 kA --> Max. turning diameter: 350 mm --> Max. turning length: 700 mm --> Spindle bore: 76 mm --> Main spindle: Integrated motorised spindle drive with oil cooling --> Tool holder: VDI 40 --> Number of turrets: 2 --> Tool stations: 20 (12 upper / 8 lower) --> Tailstock: Hydraulic --> Lubrication: Automatic centralised lubrication --> Coolant system: Separate coolant tank, 210 litres --> Machine bed: Meehanite cast iron bed with hardened box-type slideways --> Chuck: Hydraulic chuck Manufacturer: SCHUNK --> Type: ROTA NC 315-86 --> ID No. > Design: 3-jaw wedge-hook power chuck Fpedpfxozvq Dpe Al Ujn --> Chuck diameter: 315 mm --> Through-bore: 86 mm --> Piston stroke: 25 mm --> Stroke per jaw: 5.8 mm --> Max. clamping force: 155 kN --> Max. actuating force: 58 kN --> Max. speed: 3,500 min?¹ --> Jaw pitch: 1/16" × 90°

Condition: used, Year of construction: 2015, operating hours: 5,130 h, Year of manufacture: 2015 Empty weight: 23.500 kg Dimensions (LxBxH): 898 x 299 x 308 cm Fedpfx Alsttzn Tj Uepn Track width: 60 cm Digging depth: 10.795 m = Additional options and accessories = - Central lubrication

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,965 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE WITH ROTO-PALLET X-AXIS TRAVEL: 560 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 570 mm DISTANCE SPINDLE NOSE-TABLE: 210 - 780 mm RAPID FEEDS X-Y-Z: 40 - 40 - 32 m/min SPINDLE: 80-10000 rpm; 15-18,5 kW; ISO 40 - BT PALLET: N.2 ; 712X475 mm MAX ADMITTED LOAD: 300X2 Kg HIGH PRESSURE COOLANT: 15 Bar TOOL MAGAZINE: CHAIN-TYPE ; 32 POS MAX TOOL DIAMETER: 90(150) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg Fpjdpfx Aleq Nqkxo Ujn CONTROL UNIT: FANUC 21i - MB WEIGHT: 7600 Kg OVERALL DIMENSIONS: 3010 x 3450 x 3145 mm

Condition: used, power: 127 kW (172.67 HP), color: orange, lifting height: 2,800 mm, Year of construction: 2017, operating hours: 7,870 h, Year of manufacture: 2017 Number of cylinders: 6 Fpsdpfx Aljxxkf Se Usn Empty weight: 15.000 kg Carrying capacity: 10.885 kg GVW: 25.885 kg Dimensions (LxBxH): 758 x 274 x 328 cm Engine type: Doosan Doosan DL06 Stage IV