Used Double Drill for sale (15,989)

Year of construction: 1994, condition: good (used), machine/vehicle number: 491P, Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle adaptor MK 3 - right - left rotation - Drilling spindle stroke 150 mm - drilling spindle speed infinitely variable 80 - 1170 rpm - 2 feeds 0,1 / 0,2 mm/rev - throat 290 mm - max distance table - drilling spindle 780 mm - table with 2 T-slots 480 x 400 mm Psdpfxjdkx Anj Af Isgg - Height adjustable via toothed rack with hand crank - Drive 400 V / 0,9 / 1,3 kW - Space requirement approx. W 600 x H 2100 x D 900 mm - Weight approx. 420 kg - with: - coolant device - quick-action drill chuck 1-13 - illumination

Condition: used, Year of construction: 1965, bore capacity in steel (diameter) 40 mm total power requirement 4 kW Pjdpfsv S Iqcsx Af Iogg

Condition: excellent (used), Specification Spindle Speeds 9.5 to 1560 (18) Spindle taper No 5 morse Spindle travel 410mm Feeds 0.066 to 0.963 Max spindle height spindle to base 70” Column dia Graduations metric Power Locking Equipment Safety brake Pedpfx Afsrpiy Ts Iogg Box table Coolant Electrics 440 V 3 phase 50cycles Approx Dims 9’ x 5’ x 11’6” and weighs approx. 6 tons

Condition: as good as new (ex-display), Year of construction: 2025, Double side planer (Double Surface Planer ) extra wide 400 mm Maximum working width 400 mm Maximum working height 200 mm Heavy cardan feed system Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Spiral cutterheads top and bottom Latest generation IE-3 motors Spindle and feed brakes CE Pedpfxsydk Ire Af Isgg

Condition: good (used), Year of construction: 1990, table length: 1,200 mm, table width: 400 mm, Drilling machine Erlo - TCA 45 BV MACH-ID 9361 Make: Erlo Type: TCA 45 BV Year: 1990 Max. drill Ø steel:45mm Max. drill Ø cast: 50mm Max. tap Ø: 40M Stroke pinole: 280mm Throat: 470mm Spindle Taper: 5ISO/Bt/Mk Pedpfeyfd Nfex Af Iogg Speeds / ranges: 1280Rpm Table Length: 1200mm Table Width: 400mm Power: 3kW Length: 2000mm Width: 2000mm Height: 2300mm Weight: 2800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, bench grinder, belt grinder, belt sander, edge grinder, edge grinding machine -Belt sander: Manufacturer Grit, sanding belt 75 x 2000 mm Psdoydi A Iopfx Af Isgg -Motor: Teknodan 3 kW 2850 rpm -Grinding bench: Manufacturer Flott, double grinding bench type 702 1 /2/200 x 32 x 51 -Grinding discs: Ø 200 mm -Motor: AEG 0.6 kW 2800 rpm -Submission/Price: complete -Overall dimensions: 1000/900/H1685 mm -Total weight: 228 kg

Condition: good (used), Year of construction: 2000, Drilling unit SUHER Power master, year of manufacture 2000. Podsxr Dlxepfx Af Iegg

Condition: good (used), Year of construction: 2000, Drilling unit SUHNER Mono master Type: BEM12 ST25 1040, year 2000, equipped with Siemens motor. Pjdpfx Aoxr Dk Ujf Isgg

Condition: ready for operation (used), Year of construction: 1975, Column drilling machine Make CORDIA Type: S-18 Year.ca.1975 Pgsdpfx Ajhtri Ejf Ijg drilling in steel max.18mm spindle mounting : MK2 spindle speed : 90 -1450 rpm spindle stroke : 120 mm table:350 mm X 400 mm clamping surface;270 mm X 320 mm Space requirement : width 420mm depth 650mm height:2000 mm Weight:ca.350 Kg. Machine is ready for use .

Condition: ready for operation (used), Year of construction: 1970, Double sanding bench with tilting device Pgedpfjtwnxuox Af Ieg Type:R20 1 H Grinding wheel diameter 200 mm.

Condition: used, x-travel 17700 mm y-travel 4755 mm z-travel 800 mm milling width 3450 mm distance table - vertical milling spindle 3682 mm table height over floor 500 mm spindle diameter in front bearing 200 mm turning speed range 12 - 450 U/min tool taper ISO 60 axial adjustment of the spindle slide 800 mm creep feed 5 und 50 mm/min feed stepless 10 - 3000 mm/min cross adjustment of cross beam milling head 4745 rapid traverse 2 m/min creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min rapid traverse 10 m/min creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min vertical adjustment of cross beam 3682 mm rapid traverse 1,5 m/min creep feed 1,25 und 12,5 mm/min feed stepless 5 - 1500 mm/min table-size 17800x2800 mm column daylight 3600 mm Control SIEMENS 840 C table load 50.000/100.000 kg drive of main spindle 100 kW total power requirement 170 kW weight of the machine ca. 300 t dimensions of the machine ca. 40 x 8,4x 8,6 m + electrically renewed including cabinet, cabling and motors and equipped with a SIEMENS 840 C in 1999. + incl. 16 milling heads and ls the drive of x-axis consists of one hydrostatic screw with hydrostatic rack Pgjdpfx Afovkit Ao Ieg

Condition: used, diameter 5-20 mm length 10-200 mm Pgodpoi Eg Rtofx Af Isg tool adaptor MK different drilling, milling and turning tools and other accessories. Drills, tapper and mills 30 Euro/kg other accessories: 10 Euro/kg

Condition: used, Year of construction: 1972, bore capacity in steel (diameter) 50,0 mm arm length 1.350 mm workpiece height max. 1630 mm turning speeds 19 - 1320 U/min Podpfx Afewiikds Ijgg bore spindles - Morse Taper 5 MK engine output 5,5 kW weight 5 t range L-W-H 2,4 x 1,0 x 3,55 mm feed movement 475 mm floor plate size: 1650x1000 mm feeds 0,07-2,9 mm/U

Condition: used, Make: PRÄWEMA, Model: 205HS2-2 / Synchrofine, Year of manufacture: 2008, Machine no.: 077238, Control unit, Manufacturer: Rexroth Indramat, Type: System 200 BTV20, including handheld operation terminal, Workpiece diameter: Ø 95mm, Maximum workpiece length: 59mm, Maximum spindle speed C-axis (workpiece spindle): 6,000 rpm / 7,000 rpm, B-axis (tool spindle): 2,000 rpm, Maximum feed rates Z/X: 60 m/min, Honing head ZNG-No.: 416101804-8, Year: 2008, Serial no.: 221, Machine bed granite, Manufacturer: Eckbert Reitz, Type: HFSL204HS2, Year: 2008, Workpiece automation, Surface finish inspection unit, Oil drip tray, Pump, Manufacturer: Brinkmann, Type: TH160/350-001, Operating hours as of 18.11.25: 69,518 Podpfox Ahc Njx Af Isgg +++ Attention: This item is part of an online clearance sale! +++

Condition: used, Year of construction: 1990, Technical details: adjustment drive of the grinding de: 0,0025 - 0,05 mm total power requirement: 100 kW adjustment of grinding head slide: 150 mm weight of the machine ca.: 17 t grinding spindle drive: 2 x 37 kW grinding width: 30-150 mm peripheral speed: 34 m/sec Podpfevnmnrsx Af Ijgg workpiece speeds: 60 - 300 mm/Sek. grinding height: 70 mm grinding wheel diameter: 750 mm grinding tools: 750 x 75 x 350 mm grinding wheel turning speeds: 870 U/Min. max. workpiece diameter: 250 mm

Condition: ready for operation (used), controller model: Siemens 840 T, empty load weight: 15,000 kg, swing diameter over cross slide: 430 mm, Dubbelspindel CNC-draaibank met hoog vermogen, ideaal voor flenzen en tandwielen. Uitgerust met duplex werkstuk Laad- en losrobot. Psdpfx Afeycmp Ao Isgg Max. werkstukgrootte: Ø 355 x 430 mm Vermogen op beide spindels: elk 35 kW Snelheid: max 2500 tpm Type: FR 23Q-2 CNC Duitse kwaliteit Swing over bed: Ø 355 mm Max longitudinal travel Z-axis: 250 mm Power on the spindle: 35 kW Number of speeds: max 2500 rpm Toolchanger: yes Number of tools: 2 x 8 positions

Condition: like new (used), Gillardon pillar drilling machine, type GB 30 V, speed 60 - 1800 rpm, automatic feed, very good condition, tool holder MK 3. Pjdpjxpxbcefx Af Isgg

Condition: like new (used), Technical Specifications Drilling capacity in steel (diameter): 32 mm Throat depth: 320 mm Pjdpfxjvzgm Ie Af Iogg Drilling stroke: 170 mm Spindle mounting MK: 3 Speed range: Table size: 570 x 480 mm Total power requirement: 1.6 kW Weight: 650 kg Dimensions: 1200 x 800 x 2200 mm

Condition: used, total height: 1,600 mm, total length: 1,250 mm, total width: 800 mm, Empty weight: 150 kg Psdpfxjwywwys Af Isgg Tapping machine, drilling and tapping - Documentation available: No - CE certificate present: No - Serial number: 132832 - Control: Conventional - Motor power: 0.6kW - Spindle speed max.: 1600rpm - Model: omboormachine - Table width: 225mm - Table length: 290mm - Spindle speed min.: 320rpm - Transport dimensions: 1250mm x 800mm x 1600mm (l x w x h) - Transport weight [kg]: 150kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2012, Ref:11057 . 2012 Autobond Mini 105 TPHS-FL B1, double sided, fully automatic thermal laminator. Equipped with; Heidelberg deep pile suction feeder with back separation 250mm (10) diameter highly polished chrome laminating rollers Laminating nip pressure up to 6 metric tonnes 2 x Twin Tool Temperature Controllers Sheets are laminated top and bottom in one pass Rubber counter-pressure roller becomes water heated Additional heated roller, quick-change inflatable air-shaft, and perforating mechanism for 2nd roll of film Film is mounted on a quick-change air shaft Trim slitter and perforating mechanism Pneumatic clutch ensures precise film tension Swiss made temperature control unit Sheeter - Integral bump roller separator with anti-curl bar Pallet delivery table Specification: Max sheet size: 106 x 106 cm (41.73” x 41.73”) Min sheet size: 28.5 cm x 32 cm (11.5” x 12.5”) 115 gsm (80 lb text) to 650 gsm (24 pt) Max speed: 60 m/min (200 ft/min) Pgedjx U A D Uopfx Af Ijg B1 sheets up to 5,000 SPH.

Condition: good (used), Type: SSB 3 A Machine No.: 5607 Year of manufacture: 1973 Equipment: - MK3 quill - Machine lamp - Quick-action drill chuck incl. morse taper arbor, clamping range 3-16 mm - Infinitely variable speeds Psdpoxlqxfefx Af Iogg Range 1: 0-900 rpm Range 2: 0-1700 rpm - Thread cutting device Condition: good, workshop-tested, speed variator with new bearings

Condition: used, total height: 2,500 mm, total width: 1,000 mm, total length: 2,200 mm, Empty weight: 2.500 kg - Documentation available: No - CE certificate present: No - Control: Conventional - Motor power: 6.0kW - Drilling depth: 150mm - Spindle speed max.: 2650rpm - Model: iaalboormachine - Table width: 600mm - Table length: 1300mm - Drilling capacity: 32mm - Travel Y: 1000mm - Spindle diameter: 40mm - Travel Z: 600mm - Max. reach: 1000mm - Spindle speed min.: 30rpm - Transport dimensions: 2200mm x 1000mm x 2500mm (l x w x h) - Transport weight [kg]: 2500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Psdpownilxefx Af Iogg Lukas van Rossum

Condition: used, Empty weight: 4.200 kg - Documentation available: Yes - CE certificate present: No - Control: Conventional - Motor power: 2.0kW - Drilling depth: 300mm - Spindle speed max.: 2800rpm - Digital readout: Yes - Tool holder: MK4 - Table width: 700mm - Table length: 1200mm - Travel X: 1200mm - Travel Y: 800mm - Travel Z: 715mm - Max. reach: 1300mm - Type digital: Phillips - Spindle speed min.: 45rpm - Transport weight [kg]: 4200kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Pgsdpfx Aswnifrjf Ijg

Condition: used, Year of construction: 1998, - Year: 1998 - Documentation available: No Pgodpeych I Tefx Af Ijg - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total width: 940 mm, total length: 3,750 mm, total height: 1,450 mm, - Documentation available: No Pgodpfxjxa Eibe Af Ijg - CE certificate present: No - Main motor power [kW]: 1.1 - Max. cutting height [mm]: 110 - Transport dimensions: 3750mm x 940mm x 1450mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels