Used Dvpn 75 for sale (6,841)

Condition: used, Year of construction: 2020, Digital UV Coating and Finishing System MGI JETvarnish 3D Evo 75 Maximum sheet size: Dsdpozqyrrjfx Ak Ascp 1,200 × 750 mm Processable material: 135–800 g/m² Coating unit: 135–400 g/m² Suitable for coated and uncoated papers and cardboard, pre-coated as well as laminated/cashed substrates, and suitable plastic media. Coating: Varnish High-Gloss clear coat 18-liter tank Coating layer thickness: 7–232 µm Digital UV coating finishing, partial and full-area coating, as well as 3D/relief coating effects. Machine is operational and available for immediate delivery. Location: Western Europe Price on request.

Condition: good (used), Year of construction: 2008, screw conveyor diameter: 75 mm, Capacity: Screw conveyor, ø 75-36D; approx. 600 kg/h Dodpfxe Abc Hks Ak Aecp Drive: A.C. motor, 182.0 kW

Condition: good (used), Year of construction: 2008, screw conveyor diameter: 75 mm, Type: KME 75-36 R AC Year of manufacture: 2008 Capacity: Screw ø 75-36D; approx. 660 kg/h Dsdpfx Ako Abnido Aecp Condition: Functionality tested Drive: A.C. motor 182.0 kW Note: Co-extruder, year of manufacture 2015

Condition: excellent (used), functionality: fully functional, KBR reactive power controller, complete unit installed in the control cabinet. GSR 75 / 5. 75 kVAR. Dsdpfx Aj Agnwlsk Aocp

Condition: used, Year of construction: 2020, functionality: fully functional, overall weight: 2,041 kg, total length: 2,300 mm, total width: 1,380 mm, total height: 1,950 mm, power: 75 kW (101.97 HP), volume flow: 851 m³/h, pressure (min.): 5 bar, pressure (max.): 7 bar, ambient temperature (min.): 5 °C, ambient temperature (max.): 40 °C, noise level: 74 dB, protection type (IP code): IP54, Equipment: documentation/manual, refrigerant dryer, type plate available, For sale is a highly efficient, frequency-controlled screw compressor from the top-of-the-line range of the German manufacturer ALMiG, type V-DRIVE 75 (PLUS O version including heat recovery), first purchased at the end of 2020. This unit impresses with minimal energy costs thanks to its loss-free 1:1 direct drive, stepless speed control and integrated heat recovery (WRG). Technical data: Manufacturer: ALMiG Kompressoren GmbH Type: V-DRIVE 75 PLUS O including WRG Drive power: 75 kW Maximum pressure: 7 bar Volume flow: up to 14.18 m³/min (approx. 851 m³/h) Voltage: 400 V / 50 Hz Control system: ALMiG Aircontrol Premium (including RS 485, operating and fault messages) Dimensions (L x W x H): 2,300 x 1,380 x 1,950 mm Weight: 2,041 kg Equipment & special features: Dcedpfx As Ahppdek Aop Installation in a special container: - Weather-protected outdoor installation directly on the company premises. - Generous, double-wing access doors for unrestricted maintenance access. - Integrated window with exterior roller shutter. - Standardized container corner fittings (ISO corners) for crane or lifting gear handling are available. - Integrated heat recovery (WRG): For direct use of waste heat for heating purposes or hot water. - Integrated refrigeration dryer (PLUS) & filter system (O): High compressed air quality directly from the compressor. - SCD frequency inverter & asynchronous motor (IP55): Stepless adaptation to demand, soft start without peak loads. - Sound-insulated: Extremely quiet operation thanks to optimized encapsulation and vibration-isolated installation. - Documentation: Complete documentation / manual available. Important sales & collection conditions: - Delivery condition: Sale is ex works (FCA). - Loading: No loading facilities available on site! - The removal must be organized by the buyer using a truck with a loading crane or a separate mobile crane (lifting equipment suitable for ISO container corners required). - The sale is made excluding any liability for defects and warranty. Subject to prior sale and errors.

Condition: like new (used), Year of construction: 2008, operating hours: 125 h, functionality: fully functional, Cold Jet Aero 75 DX Machine – Like New This machine is suitable for industrial cleaning applications, including both small and very large projects. A key advantage of this machine is that it does not rely on the latest generation of electronics. It is one of the most powerful machines on the market and is in excellent condition. Cold Jet Aero 75 DX Dry Ice Blasting Machine – Complete with the following equipment: COLD JET AERO 75 DX DRY ICE (125 HOURS OF USE) 1 x 20’ Blasting Hose 1 x Coldjet Applicator 2 x Nozzles – NEW One of the best machines in the world, with no electronics. This is what makes it reliable, and also keeps maintenance costs down. Dcodpfx Akj Ad U Ace Ajp For inquiries or to arrange a viewing, please contact us at DrDryice. All machines sold come with a 1-year warranty. We also offer repairs and maintenance for Cold Jet machines. We also supply new Cold Jet machines. Contact us for more information. Worldwide shipping available. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Year of construction: 1991, condition: excellent (used), functionality: fully functional, Möhringen high-performance band saw from a small sawmill. Frame width 750 x 710 mm. Stroke 500 mm. Speed 300 rpm. Hydraulic feed, continuously adjustable from 0 to 12 m/min. Hydraulic raising of the saw wheels with adjustable wheel pressure. Automatic adjustment of the saw frame overhang. Automatic electric central lubrication system. Full and idle pulleys. Reinforced steel flywheel. Electromagnetic remote control. Saw mounting with sliding guides, saw gauges. Hydraulic saw tensioner. Electrical control cabinet and accessories. Dcodpfxoz N Dd Us Ak Asp Professionally disassembled and loaded onto a truck for transport.

Condition: excellent (used), Year of construction: 2005, Shinohara 75 V H Year: 2005 Counter: 21 million 5 colors Dsdpfx Ae Adzgujk Aocp Maximum format: 520 x 750 mm Maximum plate format: 745 x 605 mm Thickness: 0.04–0.60 mm Maximum speed: 16,000 sheets/hour Double impression cylinder CIP 3 IR Powder sprayer Alcohol-based dampening system Baldwin cooling and circulation system High-pile delivery Remote ink fountain control Semi-automatic plate changing (Autoplate) Automatic washing of rollers and rubber blankets

Condition: good (used), Year of construction: 1993, operating hours: 600 h, load capacity: 7,500 kg, lifting height: 3,670 mm, fuel type: diesel, construction height: 2,795 mm, power: 73 kW (99.25 HP), fork length: 1,950 mm, empty load weight: 9,500 kg, total length: 4,350 mm, total width: 1,950 mm, Load capacity 7,500 kg with UVV Dcsdpevu Ti Ajfx Ak Aep

Condition: good (used), Year of construction: 1999, functionality: fully functional, grinding belt width: 100 mm, grinding belt length: 950 mm, Equipment: CE marking, A used, well-maintained DelNegro belt sanding machine, type: ISS 75/100. The machine is suitable for belt widths of 75 or 100 mm. Sanding can be performed horizontally or vertically. 19 belts, size 100x950, grit 80, are included in the scope of supply. Two belt speeds, dust extraction system. Technical data and dimensions: Subject to change. Dcsdpfxsywarhj Ak Asp

Condition: used, Year of construction: 2021, gebraucht 2021 Dcsdpfxowiquqe Ak Aop 9502 Türkei 2200 € 1 1050 mm 2 mm 75 mm 1930 mm 700 mm 1160 mm 300 kg MINT CONDITION 3 rolls asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH

Condition: used, functionality: fully functional, With this offer, you are purchasing a used large format printing system/plotter ‘Mimaki TxF150-75’. Dcsdpfxsylud Ts Ak Aop Item for sale: 1 x Mimaki TxF150-75 with the following equipment: incl. Schulze Powder Machine 600 Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: used, mileage: 210,000 km, first registration: 05/2022, overall weight: 2,220 kg, next inspection (TÜV): 05/2028, color: white, gearing type: mechanical, emission class: euro6, Equipment: air conditioning, central locking, navigation system, Volkswagen Caddy Cargo 2.0 TDI Panel Van German vehicle from VW Leasing. 1 owner – in top condition. Additional features: Airbag for driver/front passenger, front passenger airbag can be deactivated, automatic headlight control (ALS), exterior mirrors electrically adjustable, exterior mirrors and door handles exterior, black, unpainted, cover for sliding door rail, silver, exterior mirrors, black, unpainted, cover for sliding door rail, silver, door handles exterior, black, unpainted, floor covering, front (carpet), on-board monitor without audio system (touchscreen color display, USB charging port Type C), roof rails/roof carrier preparation, EcoProfi, driving assistance system: multi-collision brake, windshield laminated glass, tinted, remote key (2) foldable, vehicle without sliding door on the left, cup holder in front, glove compartment open, rear tailgate doors without glazing, rear lights standard, interior: decorative inserts matte, interior lights in the cargo/passenger compartment: 1 piece, body/structure: panel van, cargo area partition high, without window, steering wheel (3 spokes), steering column (steering wheel) mechanically adjustable, height/longitudinal adjustment, headlight range adjustment, truck registration, engine 2.0 L - 75 kW TDI, non-smoker package, emergency call system, parking brake electric with Auto-Hold function, wheelbase standard, tire repair kit, low emission according to emission standard Euro 6d, windshield wipers with intermittent control and light sensor, sliding door on the right, seat belts in front with belt tensioner, height-adjustable, front left seat height-adjustable, seat cover/upholstery: fabric Double Grid, sun visors without mirror, steel rims 6x15, start/stop system, 12V sockets in the dashboard and cargo/passenger compartment, 12V socket in the cargo/passenger compartment, door seals with dust protection, door panel plastic, first aid kit and warning triangle, trim in the cargo/passenger compartment: standard, lashing eyes in the luggage/cargo compartment, warning system for front seat belts, heat-insulating tinted glass green (side / rear) * Sales consultant information * AN APPOINTMENT IS REQUIRED FOR A TEST DRIVE OR INSPECTION. * + Dcedpfe Ahvigex Ak Asp * Trade-in and financing possible. * Input errors cannot be ruled out. * Please check the equipment on the vehicle. Subject to errors and prior sale.

Condition: excellent (used), functionality: fully functional, Kemper spiral mixer, type SP 75 L Dcsdpez S T N Sjfx Ak Asp This Kemper spiral mixer is suitable for a maximum flour capacity of 75 kilograms and is equipped with two automatically switchable timers and two speeds. The mixer also features a stainless steel bowl and mixing spiral and is equipped with a safety guard. In very good condition.

Condition: good (used), functionality: fully functional, mileage: 297,000 km, power: 100 kW (135.96 HP), first registration: 07/1992, fuel type: diesel, maximum load weight: 2,640 kg, overall weight: 7,490 kg, axle configuration: 2 axles, wheelbase: 4,185 mm, axle spacing: 4,185 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, suspension: steel, number of seats: 3, total length: 8,000 mm, total width: 2,550 mm, total height: 3,600 mm, loading space length: 6,170 mm, loading space width: 2,450 mm, loading space height: 2,450 mm, Year of construction: 1992, Equipment: truck registration, ADDRESS: Street 9, No. 33, 12309 Berlin-Lichtenrade (see last picture) In good technical condition. 6 m body with a loading height of 2.45 m, providing space for 15 Euro pallets. 1 t tail lift. Leaf spring suspension. Radio. Double bench seat, 3 seats. Available for delivery upon request. Dsdpfszx D Akjx Ak Ajcp Also reachable via WhatsApp.

Condition: good (used), functionality: fully functional, mileage: 297,000 km, power: 100 kW (135.96 HP), first registration: 06/1992, fuel type: diesel, maximum load weight: 2,640 kg, overall weight: 7,490 kg, wheelbase: 4,185 mm, axle spacing: 4,185 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: none, number of seats: 3, total length: 8,000 mm, total width: 2,550 mm, total height: 3,600 mm, loading space length: 6,170 mm, loading space width: 2,450 mm, loading space height: 2,450 mm, Year of construction: 1992, Equipment: cruise control, power assisted steering, truck registration, ADDRESS: Straße 9, no. 33, 12309 Berlin-Lichtenrade (see last picture) In good technical condition. 6 m body with a loading height of 2.45 m for 15 Euro pallets. 1 t tail lift Leaf spring suspension Dcjdpfjzx D D Iox Ak Aop Radio Double bench seat, 3 seats Available on request Also reachable via WhatsApp

Condition: used, Year of construction: 2005, BAZ DMG milling machine cover V75linear (approx. 16,000 spindle hours), year of manufacture 2005. Dcjdpfx Aez Sn E Isk Ajp

Year of construction: 2026, condition: new, PLN-75 Mini Film Waste Pelletizing Line with Air Cooling The Mini Film Waste Pelletizing Line is designed for recycling low-bulk-density polymer waste at relatively low production capacities. It is a compact solution for processing film production waste and other lightweight plastic materials into reusable pellets. The system can process plastic film in either shredded or non-shredded form, depending on the type and condition of the material. 1. Output Range: 30~50Kg/hour 2. Standard Electricity:380V/3 Phases/50 Hz 3. Main Motor Power: 15 кW 4. Total Power: 29 кW 5. Screw Diameter. : 75 mm Djdpfx Asz Nlfmsk Aocp 6. Filter: Dual stations manual filter 7. Cooling Method: air cooled 8. Material feeder pusher: equiped 9. Application: LDPE, HDPE,LLDPE pelletizing, scraps or rolls

Condition: excellent (used), Year of construction: 1999, Arburg 221KS 250-75 / Universal machine Year of manufacture: 1999 injection unit: Screw diameter: 20 mm injection weight: 26 g Injection pressure: 2350 bar Metering volume: 31 ccm Clamping unit: Clamping force: 25 t tie bar distance: 221 mm size of clamping platens: 342x250 mm ejector: hydraulic clamping unit: toggle lever Dodpfxoz Iqptj Ak Aocp Control system: SELOGICA Additional equipment: Universal machine - injection unit can run both vertically and horizontally Control with air valve Core pull control injection unit hardened - bimetal Clamp for fixing the injection unit vertical Dimensions: Weight: 1150 kg Length/width/height: 2.63x1.34x1.93 m Drive: Pump/motor: 5.5 kW Heating power: 4,6 kW Total power: 10,1 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 1999, Arburg 221KS 250-75 / Universal machine Year of manufacture: 1999 injection unit: Screw diameter: 20 mm injection weight: 26 g Injection pressure: 2350 bar Metering volume: 31 ccm Dodjz Iqqqepfx Ak Ajcp Clamping unit: Clamping force: 25 t tie bar distance: 221 mm size of clamping platens: 342x250 mm ejector: hydraulic clamping unit: toggle lever Control system: SELOGICA Additional equipment: Universal machine - injection unit can run both vertically and horizontally Control with air valve Core pull control injection unit hardened - bimetal Clamp for fixing the injection unit vertical Dimensions: Weight: 1150 kg Length/width/height: 2.63x1.34x1.93 m Drive: Pump/motor: 5.5 kW Heating power: 4,6 kW Total power: 10,1 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 308, Technical characteristics: ⚙️ Core Specifications Attribute Value Thread Diameter Range: 3 mm to 75 mm Rolling Pressure: 0.5 to 20 tons Dsdpfx Ajxx Nuxok Aocp Max Thread Length (Plunge): 160 mm Max Thread Length (Through): 2000 mm Speed Range: 24 to 114 rpm (8-step gearbox) Tool Diameter: 145 mm to 200 mm Roll Spindle Diameter: 54 mm Shaft Distance: 130 mm to 200 mm Machine Dimensions (L×W×H): 1880 (INCLUDING HYDRAULIC UNIT) × 991 × 1270 mm Weight: ~1.6 tons 🧰 Features & Capabilities Variable Rolling Pressure: Adjustable to suit different materials and thread profiles. Heavy-Duty Construction: Built for long-term industrial use with high repeatability. Manual or Semi-Automatic Operation: Depending on configuration and accessories. Machine status: WORKING

Condition: used, Year of construction: 2004, functionality: fully functional, Man Roland Uniset 75 578 Cut Off Dcjdpfx Aoy Nkx Aok Aep 3 Towers 4 Reel Stand

Condition: excellent (used), CATALOG NUMBER 7026 TECHNICAL DATA - inlet width 740mm - inlet height 300mm - roller width 780mm Dedpfxs Af Uuus Ak Ascp - roller diameter 1000mm - blade length 780mm - number of blades 2 pcs - screen dimensions 55x55mm - 4 geared pull rollers at the bottom - lower roller motor 5.5kW - 3 geared pull rollers at the top - upper roller motor 5.5kW - belt conveyor - belt conveyor length 4300mm - belt conveyor width 600mm - belt feed motor 2.2kW - main motor 90kW - reverse gear - auto-reverse - overall machine dimensions (L/W/H) 4600x2350x1700mm - overall feeder dimensions (L/W/H) 4550x980x970mm - total weight approximately 11000kg – manufactured in Germany, - auto-reverse (with adjustable settings) – used shredder, very good condition Net price: 231900 PLN Net price: 53930 EUR Net price calculated based on an exchange rate of 4.3 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Year of construction: 2023, condition: new, functionality: not functional, machine/vehicle number: 75010; 75011, We offer two ElectraTherm AC800 ORC units for generating electricity from waste heat, including two external LU-VE air coolers. The units were manufactured in 2023 and are installed at the premises of EKOLOGIE s.r.o. (ekologiesro.com) in Rynholec, Czech Republic. They are in new, unused condition and have never been put into operation. The equipment is available immediately; dismantling will be handled by the seller. TECHNICAL DESCRIPTION The equipment operates on the principle of an organic Rankine cycle (ORC). The AC800 design is based on the PM75 series and utilizes a modified internal hydraulic circuit that allows for independent cooling of the outlet heat to the desired parameters. EQUIPMENT IDENTIFICATION • Manufacturer: ElectraTherm, by BITZER Group • Commercial designation: AC800 • Model according to the nameplate: ET75B • Manufacturing design: AC800-IP • Serial numbers: 75010 and 75011 • Year of manufacture of both ORC units: 2023 TECHNICAL DATA ACCORDING TO THE NAMEPLATES • Maximum gross electrical power of the generator: 75 kW per unit • Total maximum gross power of both units: 150 kW • Electrical system: 400 V, three-phase, 50 Hz • Operating range of hot water temperature: 65–115 °C • Maximum hot water flow rate: 83 m³/h per unit • Working fluid: R245fa • Nameplate weight "Tare Weight": 2,979 kg per ORC unit, excluding the external cooler • Maximum nameplate power consumption: 11.2 kW for unit 75010 and 11.5 kW for unit 75011 Dedpfx Akj Ag N T Is Aocp The stated electrical powers are the maximum gross values of the generators. The actual power depends on the conditions of the heat and cooling sources; the net power of the entire installation also depends on the consumption of auxiliary equipment. SCOPE OF SUPPLY • 2× ElectraTherm AC800 ORC unit • 2× external LU-VE air cooler, each with six fans External pumps, separate external heat exchangers, or connecting pipes are not included in the sale. These parts must be procured separately by the buyer. External pipes and other peripheral technologies shown in the photos are not included in the offer. SALE AND AVAILABILITY • Preference is given to selling both sets together; selling one set can be discussed • Price is negotiable • The seller is a VAT payer; the offered price is stated excluding VAT • Availability: immediately • Dismantling will be handled by the seller • Location: Rynholec, Czech Republic The attached brochures present the AC800 model series and the base ORC module PM75, from which the AC800 design is derived. The PM75 sheet serves as supplementary technical information. The specific parameters of the offered AC800 units are stated in this advertisement and in the photos of their nameplates. The scope of supply corresponds exclusively to the description of the offer.

Condition: used, Kemper SPL 75 spiral mixer Dcsdpfx Akoz A R Ths Aep Capacity (dough): 120 kg Capacity (flour): 75 kg Timer with two clocks Two speed settings Bowl rotates clockwise/counterclockwise Mobile with locking mechanism