Used Eht Variopress 225-20 for sale (56)

Condition: used, Year of construction: 1999, sheet width 3200 mm plate thickness 4.0 mm ST distance between columns 3300 mm upper clamping bar adjustment 400 mm Adjustment folding beam 80.0 mm pivoting angle 180 Grad clamping capacity max. 200 KN rear stop 10.0 - 1600 mm oil volume 160 Liter total power requirement 9.8 kW weight 8500 kg range L-W-H ~ 4900 x 2000 x 2300 mm From a maintenance workshop Good / well-maintained condition (!!) - in checked conditions - machinevideo - ?v=RY-amZooeX4 Rjdpfx Aoxaa A Nogljn Equipment: - Robust CNC folding machine - CNC control unit - CYBELEC "DNC 80 PP" * Swiveling control panel, front right * 2D graphic display for display and multiple simulation * 2D graphic programming * Easy handling - CNC electro-motorized backgauge * Travel range 10.0 - 1,600 mm * Pneumatic / lowerable stop fingers * Adjustment speed max. 250 mm/sec. * Rear sheet support table with brushes - Electro-motorized lower beam adjustment (S axis) - Electro-hydraulic pivoting movement of the lower beam - Pneumatic upper tool clamping - Pneumatic lower tool clamping - 1x freely movable double foot switch - Original operating instructions + wiring diagram/hydraulic diagram Special accessories included: - 1x split set of goat's foot upper tools, H = 150 mm (not complete) - 1x split set of goat's foot upper tools, H = 200 mm (not complete) - 1x split bending/lower tool - Rear sheet support with brushes

Condition: used, Year of construction: 1985, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 oil volume 160 L Control ELGO P8511 column arm 200 mm distance between columns 3050 mm 0 max. 300 bar voltage 400 V main drive 9.0 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear "swing cut" - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left Rjdpfxsxab Tvj Agljn * for positioning the electro-motoric rear stop * target/actual position value input possible * adjustment by three-phase motor via toothed belt - support table with ball rollers * there are recessed grips between the table plates - front finger guard - hydraulically acting sheet metal hold-down device - 1x freely movable foot switch - emergency stop button at the front - movable scrap switch - original operating instructions + circuit diagram Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal cuts - 1x EHT extra long side stop 3.000 mm with mm scale & support foot - 1x EHT extra long support arm with 3.000 mm with scale & Support foot - EHT additional support arms with mm scale

Condition: ready for operation (used), Year of construction: 1990, Immediately available ex stock: EHT Hydraulic Guillotine Shear Type EHS 10 – 31 Redpfx Ajyb Ry Aegljn Year of manufacture: 1990 Cutting length: 3,100 mm Material thickness: 10 mm Electric backgauge: 10 – 1,000 mm Adjustable cutting angle: 1 – 4 degrees Hydraulic hold-downs: 16 units Strokes/min: 22 Drive: 15 kW Weight: 8 t Spare blades included Price: EUR 5,750.— plus VAT, ex location

Year of construction: 2005, condition: ready for operation (used), Working length: 3050mm, max. material thickness: 16mm, cutting angle range: 0.5°-2.5°, cutting gap adjustment range: 0.05mm-1.2mm, stroke rate: 16/min, back gauge travel: 1000mm, oil quantity: 300l. Machine dimensions X/Y/Z: approx. 4200mm/4250mm/2050mm, weight: approx. 14000kg. Documentation available. On-site inspection is possible. Rjdpsx U Dw Njfx Aglen

Condition: ready for operation (used), Year of construction: 2001, pressure 135 t chamfer lenght 3050 mm distance between columns 2550 mm dayligth 320 - 560 mm stroke 240 mm working feed 10.0 mm/sec return speed 150 mm/sec column arm 400 mm work height max. 1050 mm control DNC 1200 PS/B operating pressure max. 297 bar compressed air 4.5 - 6.0 bar connected load 15.0 kW oil volume 250 ltr. weight 11500 kg range L-W-H 5240 x 2400 x 2900 mm good/well-Maintained conditions used in Aluminum processing - in checked conditions - machine Video - ?v=z-Bxibk_8uE Features: - CNC Electro-Hydraulic Press Brake - CYBELEC CNC Control Model DNC 1200 PS/B * Swiveling Control Panel, Front Right * Numerical Programming * Tool & Program Library - CNC Controlled Axes: Y1 + Y2 + X + R + CNC Crowning - CNC Electro-Motorized Backgauge (X-Axis) * with 3x Manually Adjustable Backgauge Fingers (Z-Axis) * Maximum Travel Speed: 250 mm/sec - CNC electro-motorized height adjustment from the backgauge (R-axis) * Maximum travel speed: 100 mm/sec. - CNC under-table crowning - CNC pneumatic die shifting (I-axis) - Pneumatic upper tool clamping - Pneumatic lower tool clamping - Rear safety guard, including swiveling door - 2x side safety guards Redpfxjx Ik D As Aglsn - includes LAZER SAFE safety device - front - 2x stable front support arms with sliding system - original EHT split upper and lower tools - 1x freely movable 2-hand/foot control - Wiring diagram + hydraulic diagram

Condition: good (used), Year of construction: 2000, sheet width 3050 mm plate thickness 10.0 mm thickness at "Niro-steel" 6.0 - 8.0 mm down holder 13 Stück distance between columns 3070 mm cutting angle 1.0 - 4.0 ° no. of strokes ~ 22 Hub/min Control ELGO P8511 oil volume 240 l voltage 400 V total power requirement 15.0 kW weight 8000 kg range L-W-H 3550 x 2350 x 1900 mm good / well-maintained condition with special accessories (!!) Equipment: - NC electro-hydraulic guillotine shears - heavy / stable welded construction (machine body) - NC ELGO digital control unit "P8511" - NC electro-motorized backgauge on ball screws - electro-hydraulic cutting angle adjustment * Front analog cutting angle display Rjdpfx Asx Emqysglon - 1x stable side stop, with T-slot and mm scale - 3x stable support arms, with T-slot and mm scale - Ball castors in the work table incl. recessed grips - Front finger guard - can be folded up at the front - 1x freely movable foot switch - 2x front EMERGENCY OFF button - Operating instructions (PDF)

Condition: good (used), functionality: fully functional, Year of construction: 2005, controller manufacturer: ELGO, controller model: P8721, - Very well-maintained hydraulic guillotine shear EHT - Max. cutting length: 6050 mm - Max. sheet thickness at 450N/mm²: 6 mm - Pneumatic sheet support lift - Backgauge with positioning control Rsdpex Sau Eofx Aglsn - Ready for demonstration under power - Weight approx. 24 t

Condition: good (used), functionality: fully functional, Year of construction: 2006, control type: CNC control, controller model: DELEM DA-69 TW, bending force (max.): 300 t, working width: 6,050 mm, overall weight: 33,000 kg, input voltage: 400 V, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, - Press brake EHT / Trumpf 6050mm x 300t - Immediately ready for operation, well-maintained condition Rodpfx Agex Rvrdelen - CNC-controlled axes Y1 / Y2 / X / R / Z1 / Z2 / crowning - Extensive tool set - From facility closure, available for inspection under power - Matching guillotine shear 6050 x 6mm from EHT / Trumpf also available

Year of construction: 2005, condition: excellent (used), Very good, hardly used Rodpfx Aexbft Noglen

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1992, controller model: Cybelec DNC 70, bending force (max.): 110 t, stroke length: 200 mm, distance between stands: 3,050 mm, working length: 3,550 mm, TECHNICAL DETAILS Press force: 110 t Bending length: 3,550 mm Distance between uprights: 3,050 mm Frame throat depth: 400 mm Ram stroke: 200 mm MACHINE DETAILS Control system: Cybelec DNC 70 Rsdsxxqtcopfx Aglen Drive power: 15 kW Weight: 9,500 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, controller model: Cybelec ModEva 10S, bending force (max.): 170 t, empty load weight: 16,300 kg, working length: 4,050 mm, TECHNICAL DETAILS Press force: 170 t Bending length: 4,050 mm MACHINE DETAILS Control: Cybelec ModEva 10S Rjdpfx Agexwnv Eslsn Machine weight: 16,300 kg EQUIPMENT Lasersafe 2 sheet supports Die shifting Crowning Pneumatic tool clamping top and bottom Controlled axes: Y1, Y2, X, R, Z1, Z2 Tool cabinet with tools

Condition: good (used), functionality: fully functional, Year of construction: 2008, Press force: 170 t Bending length: 4050 mm Machine weight approx.: 16,300 kg Control: ModEva 10S Equipment: - CNC control Cybelec ModEva 10S - Lasersafe - 2 sheet supports - Die shifting - Crowning system - Pneumatic tool clamping (top and bottom) - Controlled axes: y1, y2, x, R, z1, z2 - Tool cabinet with tools Rsdpjxu I Ucjfx Aglsn

Condition: good (used), Year of construction: 1990, Pressure 320 t folding length 8050 mm column width 7550 mm Control Cybelec ModEva 12S Equipment/accessories: - CNC-controlled backgauge x-direction and R-direction - motorized die shift M1 and M2 - 2 x pneumatic bending aids in front - pneumatic sheet holding unit - automatic die clamping at the top - motorized crowning rebuild 2009: - motorized die shift 111-112 mechanical and electrical NEW Rsdpfx Aehwib Tegljn - backgauge X-R mechanical and electrical NEW - Punch clamping automatic mechanical and electrical NEW - CNC control mechanical and electrical NEW - Safety valves NEW - Measuring rulers NEW - Control valves Y1 - Y2 NEW - Main pump hydraulics NEW

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1993, bending force (max.): 150 t, stroke length: 700 mm, throat depth: 350 mm, distance between stands: 3,050 mm, working length: 3,550 mm, The control system was retrofitted in 2011! TECHNICAL DETAILS Press force: 150 t Bending length: 3,550 mm Distance between uprights: 3,050 mm Stroke: 700 mm Throat depth: 350 mm MACHINE DETAILS Control: Cybelec DNC 880S Dimensions & Weight Dimensions (L x W x H): 4,400 × 2,200 × 3,940 mm Rjdpfx Agexn Srxelen Machine weight: approx. 15,000 kg EQUIPMENT Bending aid in front of the machine Parking space for bending aid 3 backgauge fingers

Condition: used, functionality: unexamined, Year of construction: 2016, machine/vehicle number: 24398, control type: CNC control, controller manufacturer: Cybelec, controller model: Modeva Pac 15, Used Cybelec Modeva Pac 15 controller for press brake, max 7 axes. Redpjx Dh U Iofx Agljn

Condition: used, functionality: fully functional, Year of construction: 2002, Press force: 135 t Bending length: 3050 mm Distance between uprights: 2550 mm Stroke: 400 mm Oil volume: 300 l Control: CYBELEC DNC 1200 PS Eco Rodpfx Aoxfh R Eogljn Total power requirement: 15 kW Machine weight approx.: 10,700 kg Dimensions (LxWxH): 4200x2200x3200 mm Accessories/Equipment: – 2 bending aids in front of the machine – Parking right/left for bending aids – 3 backgauge fingers – CYBELEC DNC 1200 PS Eco control

Year of construction: 1983, condition: used, machine/vehicle number: 28148, pression: 150 t Redpfx Ageb N Evmolsn working width: 4500 mm clear support width: 3050 mm support throat: 300 mm rear stop: 1000 mm electrical connection: 380 V, 18,5 kW weight: 14,8 t space needed: 4200 x 2000 x 3000/3150 mm

Year of construction: 1990, condition: used, pression: 250 t working width: 3550 mm Redpfx Ago Dqaqslen clear support width: 3050 mm support throat: 300 mm rear stop: ja mm electrical connection: 400 V, ca. 26 kW weight: 20 t space needed: 2100 x 3800 x 3100 mm

Year of construction: 1990, condition: used, pressure 1500 kN chamfer lenght 3550 mm distance between columns 3044 mm Control Cybelec 34 PS-CN column arm 350 mm max. ram stroke 220 mm dimensions of the machine ca. 3200 x 4200 x 2100 m Rodped Ih S Ujfx Aglsn sheet support hinten / back number of support arms 2, verschiebbar / adjust. die shift hydraulical tool clamping upper tool quick change system crown 3 sets of tools included

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1990, controller model: Cybelec ModEva 12S, bending force (max.): 320 t, working width: 8,050 mm, distance between stands: 7,550 mm, Conversion 2009: - motorized die shift 111-112: mechanically and electrically NEW - Backgauge X-R: mechanical and electrical NEW - Automatic punch clamping: mechanical and electrical NEW - CNC control: mechanical and electrical NEW Redow Sttaepfx Aglon - Safety valves NEW - Measuring rulers NEW - Control valves Y1 - Y2 NEW - Main hydraulic pump NEW TECHNICAL DETAILS Pressure: 320 t folding length: 8050 mm Stand width: 7550 mm Control system: Cybelec ModEva 12S EQUIPMENT - CNC-controlled backgauge x-direction and R-direction - Motorized die displacement M1 and M2 - 2 x pneumatic bending aids at the front - Pneumatic sheet holding unit - Automatic tool clamping at the top - motorized crowning

Condition: good (used), Year of construction: 2006, machine/vehicle number: B0617A0014, Offer 25376 Technical Data: - Max. cutting width: 3050 mm - Max. cutting capacity at 45 Kp/mm²: 13 mm - Hydraulic cutting angle adjustment - Number of hold-downs: 13 pcs - Front angle gauge Rjdpexp Hp Uofx Aglon - 4 front support arms - Motor-driven, position-controlled backgauge: 10 - 1000 mm - Cutting line illumination - Rear area safety with side grids and light barrier - Electric foot switch - Drive: 400 V / 20 kW - Required floor space approx.: W 4350 x H 2100 x D 2200 mm - Weight approx.: 8.5 t

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, operating hours: 4,125 h, working width: 3,050 mm, sheet thickness (max.): 13 mm, back gauge: 1,000 mm, TECHNICAL DETAILS Rodpfxsww E Nxj Aglen Sheet width: 3,050 mm Sheet thickness: 13 mm Back gauge – electric: 10–1,000 mm Strokes: 16 strokes/min Control: Elgo MACHINE DETAILS Total power requirement: 22 kW Operating hours: approx. 4,124 h EQUIPMENT - Automatic cutting gap adjustment - Sheet lifting device - Foot switch - Digital back gauge 1,000 Elgo - Scrap chute - Rear safety guards - Angle stop - Material support arms

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, machine/vehicle number: 210860, working width: 3,050 mm, stroke length: 280 mm, installation height: 480 mm, pressing force: 150 t, TECHNICAL DETAILS Bending length: max. 3,050 mm Stroke: max. 280 mm Installation height: max. 480 mm Press force: max. 1,500 kN Oil volume: 400 l Rsdpfswbuurjx Aglen Control type: UN9D1APSE MACHINE DETAILS Current type: 3-phase Frequency: 50 Hz Operating voltage: 400 V Control voltage: AC 230/24 V Rated current: 45 A Rated current of the main fuse: 80 A Power of the main motor: 18.5 kW EQUIPMENT - Various special tools

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1993, machine/vehicle number: 209255, working width: 3,050 mm, stroke length: 280 mm, installation height: 480 mm, pressing force: 110 t, TECHNICAL DETAILS Bending length: max. 3,050 mm Stroke: max. 280 mm Installation height: max. 480 mm Control system: DNC70 Redewkqr Sspfx Aglen Pressing force: max. 1,100 kN Oil volume: 340 l MACHINE DETAILS Current type: 3-phase Frequency: 50 Hz Operating voltage: 380 V Control voltage: AC 220/24 V Rated current: 37 A Rated current of the main fuse: 63 A EQUIPMENT - 1 set of upper and 1 set of lower tools

Condition: not inspected (used), Year of construction: 1992, CNC folding machine make: EHT, type: EHPS 11 - 45, SN: 206882, year: 1992, pressure capacity: 1,100 kN, working range: 4,450 mm, CNC control Cybelec, 2-hand operation, safety device make: Trumpf, retrofitted in 2023, last maintenance in 2023 by Trumpf for approx. €10,000.00, Rodpfx Aev Duu Esglsn Note: Machine already professionally dismantled and ready for transport