Used Extruder for sale (400)

Condition: good (used), Extrusion Line with Extruder & Co-Extruder. Kwjden Utt Hepfx Ab Tsu Sheet configuration B/A/B used for PP. Direct cooling unit (SMK) and SBI measuring unit newly installed in 2015. * Max. output: 1350 kg/h * Main screw output: 950 kg/h * Main screw: 180mm / 33D * Co-extrusion output: 400kg/h * Co-extruder scew: 120mm / 33D * Die width: 650mm * Roll stack: 3 * Winding unit for Jumbo rolls up to 1500kg This Extrusion Line is already disassembled and secured for transport (Location: Waalwijk, Netherlands).

Condition: good (used), Year of construction: 2012, Bystronic manual butyl extruder Type: BEZ Kwodovzky Sjpfx Ab Tou Frame dimensions The following minimum and maximum dimensions for the frames to be processed must be observed: Minimum dimensions Maximum dimensions 70 mm 4,000 mm Leg length (HR = LR) 5.0 mm 12.0 mm Profile height (HP) 4.0 mm automatic up to 24 mm / manual up to 35 mm S-IGL-2296

Condition: used, Used Buss extruder PLK 100 for sale. The extruder was used in the powder coatings sector. Kwedpfx Abevfd Uqs Tju The extruder is fully functional

Year of construction: 1999, condition: used, Seocnd hand Entex Extruder PL- WE 100 complete with electrical cabinet. Wa in operation for Powder Coatings. For sell is also a Entex Extruder PL WE 70 ( Laboratory ). Kedpfxjbqt Ars Ab Tewu Photos on request.

Year of construction: 2017, condition: good (used), Used Xtrutech Extruder XTS 24 for sale. The extruder is fully functional and was used in the powder coating sector with many spare parts. Ksdpfevcynujx Ab Tswu

Condition: good (used), Year of construction: 2006, machine/vehicle number: Serien Nr. 64019447, Used Coperion Werner and Pfleiderer ZSK 34 Mvc twin-screw extruder for sale. The extruder was used for powder coatings Kjdpfxevcyk Ns Ab Tjwu

Year of construction: 2006, operating hours: 15,000 h, condition: good (used), For sale is an Erema 1007T. Year of manufacture: 2006 Operating hours: 15,420 Kwodpfeumubysx Ab Tou Throughput: 250-350 kg/h Currently, the system is used to process HDPE, but it is also suitable for other plastics such as LDPE. The system can be viewed during operation. A new extruder screw was installed in February.

Year of construction: 2006, condition: good (used), Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Different combinations of production are possible: Kwjdpfx Aopaiaijb Teu - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg

Year of construction: 1997, operating hours: 31,850 h, condition: good (used), Conical twin screw extruder - Manufacturer: CINCINNATI - Type: Titan 45 - Conical screws Ø45mm - Year: 1997 - 31850 operating hours - Engine power: 15kW - Flow rate: 120kg/h - Replacement motor - Replacement vacuum pump - Replacement material feed screw Kedov D Nzmjpfx Ab Tswu

Year of construction: 2001, operating hours: 64,499 h, condition: good (used), Conical screws, approx. 110 kg/h. A.C. motor 30.0 kW. New motor, 64,499 operating hours. Kwjdpsw Hy Uusfx Ab Tju

Year of construction: 2024, condition: new, noris- Extruder MINI ESE 20/25 D Technical data Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 20-200 min -1 Screw axial pressure [bar] 300 Continuous load 350 maximum Drive Three-phase drive with frequency converter Drive power [kW] max. 2.5 Reduction gear with integrated axial bearing Ksdpfehx Elfox Ab Tswu Weight [kg] approx. 160 Dimensions [Lx Wx H] [mm] approx. 1050 x 600x 1590 *) Electrical connection values 3 / N / PE Supply voltage [V] 400 at 50 Hz Control voltage [V] 230 Temperature control electrical resistance heating bands in mica design. Max. processing temperature [°C] 300 Switch cabinet and control panel The electrical installation of the extruder is located in the machine base. The base contains all the necessary switching, control and display devices. The feed zone is water-cooled, the water connection is provided by the customer, a cooling unit for cooling the water is not included in the offer. Extruder tools are not part of the offer

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 133846, LDPE extruder, head diameter 150 and 200 mm, screw diameter 55 mm, width up to 1200 mm, 30-180 micron, single winding Kwodpfjxdknqjx Ab Tsu

Condition: new, Year of construction: 2025, functionality: fully functional, Der Getreideextruder EGK-60 wurde entwickelt, um die Qualität des Futters zu verbessern, hochwertiges Futter zu erhalten, um das Wachstum der Tiere deutlich zu verbessern und die Menge der produzierten Milch zu erhöhen.

Der Extruder verwandelt Getreide in eine schaumige Masse in Form von kleinen Stäbchen oder Flocken. Die Antinährstoffe in den Hülsenfrüchten werden deaktiviert. Unter dem Einfluss hoher Temperaturen findet eine Desinfektion des Futters statt, die schädliche Mikroflora, Pilze und krankheitserregende Bakterien abtötet, für die junge Tiere und Küken besonders empfindlich sind.

Außerdem werden unter Druck und Hitze die für den Verdauungstrakt schwer verdaulichen Stärkebestandteile in leichtere und einfache Kohlenhydrate und Zucker aufgespalten. Vitamine und alle anderen Nährstoffe bleiben erhalten, da die Wirkung der Temperatur nur von kurzer Dauer ist und im Bruchteil einer Sekunde eintritt. Dadurch verlieren die Tiere nicht ihre Kraft bei der Verdauung des Futters, sondern setzen ihre gesamte Energie und Kraft für die Steigerung ihres Körpergewichts und der Milchproduktion ein. Die Verdaulichkeit des Futters durch die tierischen Organismen liegt bei 90 %.

Das fertige Produkt eignet sich hervorragend für den Transport und die Lagerung, da es sich nicht auflöst oder bröckelt.

Länge: 750.0(mm) Breite: 800.0(mm) Höhe: 500.0(mm) Gewicht: 80.0(kg) Warenart: Futtermittelextruder / Extruder Anwendung: Zur Futtermittelextrusion Antriebsart: Elektrisch Leistung: bis zu 60.0(kg/h) Motorleistung:
7,5 kW Spannung:
400 V Drehzahl: 1500 (U/min) Tankinhalt:
3L Rohmaterial für die Verarbeitung:
Getreide (ölfreies Getreide | Feuchtigkeitsgehalt 15-25 %) Gewonnenes Erzeugnis: Stangen mit einem Durchmesser von 10 mm und einer Länge von 10 mm Kwsdpfx Abewk Ipne Teu

Condition: new, functionality: fully functional, Die Arbeitseinheit des Getreideextruders vom Hersteller Technomaszbud – WE-30 – verarbeitet Getreide zu einer Masse, die in kleine Stäbchen oder Flocken geformt wird. Durch dieses Verfahren werden unerwünschte Stoffe und Verbindungen, die in Hülsenfrüchten enthalten sind, deaktiviert. Kodpswi Sc Njfx Ab Towu

Year of construction: 2013, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 20910-01, Unused Hosokawa Bepex model BX 150 stainless steel (AISI 316) basket extruder for low pressure extrusion. Products with loose structure, large surface and good forming properties are produced with this machine. The product consists of a paste of low flow characteristics and low moisture content. The product to be processed is transported by the inlet into the machine. In the product area are two rotors which works in oposite directions to each other. Kwsdjt Tvx Topfx Ab Tju - The upper 2-arm rotor with angle rotor and additional stirrers mixes and conveys the material down. Rotor is driven through gearbox by 0.55 kW, 60 Hz electrical motor, adjustable speed from approx. 14 - 139 rpm. - The lower 3-arms rotor is equipped with curved arms and rotor knives. Through the lower 3-arm rotor the product is compressed and forced through a cylindrical screen basket. The diameter of the granules results from the perforation diameter in the screen basket. Rotor is driven through gearbox by 3.0 kW, 60 Hz electrical motor, adjustable speed from approx. 15 - 144 rpm. Includes (2) extrusion screens 2 mm dia x 1.2 mm thick, switchboard with integrated control panel. Mounted on stainless steel frame with (4) wheels.

Condition: like new (used), Year of construction: 2024, operating hours: 200 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total length: 2,700 mm, I offer a new machine for large format thermoplastic solutions for 3D printing. Control: Stäubli / Cead - Profinet full controll Robot: Stäubli TX200L - reach 2700 mm, load capacity 100kg Extruder: Cead E25 with a flow rate of 12kg/h Dryer VIZMATEC 100l plus automatic dosing for continuous production. Kwsdpfx Absurvzrs Teu G-CODE / NC code is used to generate the robot trajectory.

Condition: excellent (used), Year of construction: 2008, 2-component extruder HDT HD Pro 6 Easy SI Year of production: 2008 (Overhauled in 2019) For Silicone Kwsdpfx Abjwngagj Tsu Hydraulic Very good and clean condition As is Available immediately

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2.065.0, clamping force: 200 kN, New digital control from BBM. Two sets of extruder heads (see attached pictures). Kwodpfx Ajw Dcybeb Tju

Condition: excellent (used), Year of construction: 2017, Snack & Filled Stick/Pillow Production Line -Production capacity: 200 kg/h -Power requirement: 62 kW, 380 V / 50 Hz -Certification: ISO 9001 / 14001 / 18001, CE certified General description: Complete automatic line for the production of extruded snacks and filled sticks/pillows. The system is designed for continuous operation and includes all stages from raw material hydration to ready-to-season product cooling. All main components are made of stainless steel 304, ensuring full food-grade compliance and easy cleaning. Main components: -Corn moisturizing mixer (300 kg) with water dosing and metal impurity magnet. -Helix feeder with automatic extruder feeding and safety grid. -Extruder (200 kg/h) with 50 HP motor, LS inverter control, SKF bearings, 5 interchangeable dies, and air cooling system. -Air-current conveyor transferring product to the dryer. -Dryer (gas or electric) insulated double-wall stainless cylinder with inverter speed control. -Seasoning drum (Ø 85 cm × 3 m) with inverter speed control and spray coating system. -Two flavor & oil mixers, double-jacketed, 200 kg capacity each. -Flavor pump with inverter-controlled dosing. Kodpoxqmxfjfx Ab Towu -Cutter for sticks/pillows length adjustment. -Cooling conveyor with fans for product cooling before packaging. -Butter melting tank and stuffing mixer tank, both double-jacketed, temperature-controlled. Control system: Centralized Schneider & LS electrical control panels with full motor protection, inverter speed control, and automatic temperature regulation. Overall dimensions: Approx. 15 m (L) × 3.5 m (H)

Year of construction: 1994, condition: good (used), Materials: PE, PP, PA, PETP, PS, ABS, LDPE, HDPE, MDPE Conveyor belt 5000/000 with metal detector Extruder RM 120 VE with double degassing Cylinder heating zones: 5 Automatic Erema laser filter Kwsdpfx Abjxantpj Tsu Double degassing Die face cutter Compactor Water bath Centrifuge Extruder drive 110 kW Cutter 75 kW Extraction blower Cyclone Output: 450–500 kg/h

Year of construction: 1980, operating hours: 36,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 11360, Looking for a reliable, cost-effective solution? This used extruder machine offers excellent performance at a fraction of the cost of a new model. Well-maintained and fully functional, it’s perfect for processing PVC. Ideal for manufacturers seeking to expand production without breaking the budget. Contact us now for more details! Kwjdpfxjvuquvs Ab Tou

Condition: new, functionality: fully functional, XTS56 - 24D Twin Screw Extruder • Water Cooled 130kW AC Motor and Drive. – Low Noise Kedpfxew Snlwe Ab Tswu

Condition: good (used), Extruder for the production of plastic pipes The machine can be inspected by appointment! Kwodjxcwxyepfx Ab Tou Videos demonstrating its operation can be viewed on the manufacturer's website!

Condition: good (used), Year of construction: 1989, machine/vehicle number: NE 60 053, Brand: Hans Weber Type: NE 60 Serial No.: NE 60 053 Kodpfx Aboylv A Re Tewu Year of manufacture: 1989

Condition: used, Production line consisting of: (1) Twin-screw extruder Technical details: Screw diameter 75 mm, capacity: max. 200 kg/h, KraussMaffei-Berstorff control system, weight 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration table Technical details: four (4) SPECK pump units, length approx. 6 m, weight 2.7 t (1) Haul-off unit + punching unit + guillotine unit Technical details: Contact length approx. 2.5 m, unit length approx. 8 m (1) Tilting table Kjdpfx Abex I Inxj Tjwu Technical details: Tilting of profiles, table length approx. 6,000 mm