Used Felder Cf 731 for sale (106)

Condition: excellent (used), Year of construction: 2014, operating hours: 216 h, functionality: fully functional, machine/vehicle number: 25.12.004.14, - Very good edge banding machine for sale due to new acquisition. - New jointing cutters were installed only 2 months ago. - Low total running meters! - The machine is still in operation and can be tested. - The edge finish is still very good. Equipment: - Jointing cutters up to 2mm - End trimming unit - Multi-radius flush trimmer - Profile scraper R2 - Surface scraper - Buffing unit Price includes VAT. Sale without any warranty!! Ncodpfx Ajx A S N Hjfzjl Available from end of January 2026.

Condition: excellent (used), Thickness planer Felder D963 Ncedpfsxdmu Tex Afzsl Max. planing width: 630 mm, Max. planing height: 300 mm, Spiral cutterhead, two rows, Electric height adjustment with readout, Feed with adjustable speed, 7.3 kW motor, Machine in very good condition.

Condition: used, Combined Machine FELDER BF6-26 -used- Tilting circular saw, Angle-mitre fence, Tilting spindle moulder, Spindle moulder with forward and reverse rotation, Self-adjusting cutterblock ----- Technical Data ----- Planing width: 260 mm, Number of knives: 2 pcs, Cutterblock diameter: 86 mm, Passage height: 220 mm, Planer table length: 1300 mm, Cutting width: 780 mm, Circular saw tilting range: 0-45°, Spindle moulder diameter: 30 mm, Spindle moulder tilting range: 0-45°, Usable spindle moulder length: 120 mm, Nodpjxlt Shefx Afzscl Max. cutter diameter: 220 mm, Max. retractable cutter diameter: 180 mm, Spindle speeds: 3500/6100/7800 rpm, Motors: 3 units, Extraction port for planer: 120 mm, Extraction port for saw: 120 mm, Extraction port for spindle moulder: 120 mm

Condition: excellent (used), Felder kappa 550 panel saw, format 4 Sliding table 320 cm, Blade tilt and height adjustment motorized, Right-hand fence motorized adjustable up to 1600 mm, Main motor 7.35 kW, Max blade diameter 500 mm Used machine, in very good condition. Nodpox Swzvsfx Afzscl

Condition: ready for operation (used), Year of construction: 2000, Felder RL-160 clean air extraction unit with a maximum volumetric flow rate of 3200 m³/h. Technical data: - Max. volumetric flow rate: 3200 m³/h - Filter area: 10 m² - Extraction connection diameter: 160 mm - Manual filter cleaning Ncedpfx Afsx S I D Uozsl - H3 dust tested - Year of manufacture: 2000 - From a school operation

Condition: used, Edgebanding machine Tempora F 60.06 - Year of manufacture: 2018 - Jointing cutter, radius cutter, scraper for radii and surfaces Ncsdpjx Ha I Uofx Afzsl - Cleaning and release agents - Spray device - Edge thickness: 0.4-6 mm - Installation length: 3220 mm - Sawing/trimming unit

Condition: excellent (used), Year of construction: 2016, Clean Air Extraction Unit RL 250 Year: 2016, low operating hours Nedex Ruhwopfx Afzocl 5.5 kW motor Pneumatic filter cleaning 250 mm duct connection Filter area: 50 square meters Chip container volume: 2 x 250 liters Dimensions: 2640 x 1200 x 2260 mm Weight: 785 kg

Condition: used, Year of construction: 1999, Used machine Year of manufacture: 1999 Equipment and technical data: - Maximum volume flow: approx. 3,200 m³/h - Nominal volume flow: 1,750 m³/h - Negative pressure: approx. 1,120 Pa - Filter area: approx. 10 m² - Collection container: total volume approx. 400 liters - Extraction connection diameter: 160 mm - Motor power: 3.0 kW - Voltage: 3 × 400 V, 50 Hz - Phases: 3N - CE marking Dimensions: approx. 1,775 × 898 × 2,005 mm Nedpfx Afex Enr Eszecl Weight: approx. 320 kg Availability: short-term Location: 63934 Röllbach

Year of construction: 2021, condition: ready for operation (used), This Felder RL 300 was manufactured in 2021. It features a new extraction system, never used, with a maximum volume flow of 6000 m3/h and a nominal volume flow at 20 m/s of 5090 m3/h. The machine includes a filter area of 50 m2 and dual 250-liter chip collection containers. Sound pressure level is at 75 dB. For more information about this machine, please reach out to us. Application Types Ncodpox D Ex Rjfx Afzol Other Woodworking Machinery

Year of construction: 2021, condition: ready for operation (used), Main Drive Number of axis 4 Movement X-Axis Movement 4000 mm Ncedpfxsx D D Hmo Afzjl Z-Axis Movement 500 mm Y-Axis Movement 1670 mm This 4-axis CNC processing center was manufactured in 2020. It features a 12 kW milling spindle with a speed range of 1000-24000 rpm and a C-axis rotation of 0-360°. The machine includes a 12-station linear tool changer and a comprehensive drill head with 16 spindles. It also boasts a robust safety system with a light barrier. Consider the opportunity to buy this Felder Format 4 Profit H 200 CNC processing center. Contact us for more information about this machine. Application Types CNC Wood Machining

Condition: ready for operation (used), Year of construction: 2020, cutting length (max.): 5,300 mm, cutting depth: 80 mm, Technical Specification Max. Cutting Length 5300 mm Max. Cutting Depth 80 mm Nedpjx D D Scsfx Afzjcl This Felder Format 4 Kappa V80 panel saw was manufactured in 2020. It features a powerful 5.5 kW motor, a saw blade diameter of 300 mm, and can handle cutting lengths up to 5300 mm and heights up to 2200 mm. Ideal for precise large-scale panel cutting. Contact us for more information about this machine. Application Types Sawing (Wood)

Condition: ready for operation (used), Year of construction: 2019, This Felder FORMAT 4 Tempora60.06LX edgebander was manufactured in 2019. It features an x-motion PLUS control system, chain feed with a speed of 10 m/min, and a Teflon-coated gluing unit for EVA or PUR granulate. The machine supports edge thicknesses from 0.4 to 3 mm and includes a multifunctional milling unit. Consider the opportunity to buy this Felder FORMAT 4 Tempora60.06LX edgebander. Contact us for more information about this machine. Ncsdpsx D D R Ssfx Afzsl Application Types Edge Banding

Condition: ready for operation (used), Year of construction: 2010, Additional Equipment Diamond cutter and glue roller newly installed. This FELDER MG580 edgebander was manufactured in 2010. Ideal for precise edge banding applications, it represents a reliable choice for enhancing your woodworking operations. Contact us for more information. Njdpfex D Rklox Afzjcl Application Types Edge Banding

Year of construction: 2021, condition: ready for operation (used), This Felder FORMAT 4 KAPPA 550 panel saw was manufactured in 2021. It features a sliding table saw with a saw blade diameter range of 250-550 mm, offering cutting heights of 202 mm at 90° and 140 mm at 45°. It supports three speeds: 3000, 4000, and 5000 rpm, and includes a cutting width of 1250 mm and length of 2800 mm. The machine also boasts e-motion control and a telescopic stop for crosscuts up to 3200 mm. Contact us for more information. Njdpfx Afox D Exqszjcl Application Types Sawing (Wood)

Condition: ready for operation (used), Year of construction: 2021, This Felder FW 1102 P was manufactured in 2021. A used wide belt sander featuring a contact roller unit and a fine sanding with segmented electro-pneumatic sanding shoe. It includes a 7" touch color screen, digital grain compensation, and a vacuum table. The feed speed is variable from 2.5 to 18 m/min, sanding width of 1100 mm, and height range from 3 to 170 mm. Consider the opportunity to buy this Felder FW 1102 P belt sander. Contact us for more information. Application Types Ncodpfxox D Eyhj Afzol Sanding

Condition: used, Year of construction: 2011, For sale: CNC machining centre profit H20 Format-4 Felder - year 2011. The machine is in continuous operation and can currently be inspected under power! 3-axis centre with preparation for a 4th axis. Working area 1250x3150mm, Z height=100mm, possibility to work on two separate working zones. In 2024, the electrospindle was refurbished. All repairs and maintenance carried out by a qualified service provider. Loading is provided. Transport is the responsibility of the buyer – flatbed truck with a bed length of 7-8m required. Requirements to connect the machine: - Electric cable 5x4mm2 with a plug compatible with workshop sockets - Electrical protection (at least) 32A industrial, matched to motor power. General rule: rated current indicated on the machine (nameplate) +40% Nedpfx Afjxg Ehdezocl - Pneumatic connection, internal diameter at least 12mm - Compressor with capacity of at least 100l/min - Extraction/aspiration system VAT invoice provided. Price shown is net. For any questions please contact us by phone or email.

Condition: excellent (used), Year of construction: 2018, Edgebander Manufacturer: Felder Model: G360 Year of manufacture: 2018 Operating hours: approx. 813 h Edge thickness: 0.4 - 3 mm Workpiece thickness: 10 - 45 mm Feed speed: 8 m/min Ncodpfx Afsx Niuvezsl Total power: 5.5 kW Overall length: approx. 3,200 mm Pre-milling unit: Yes End trimming unit: Yes Flush trimming unit: Yes Radius scraper: Yes Surface scraper: Yes

Condition: good (used), Felder saw in nice condition. Has only had occasional use so in nice condition. Ncsdpfx Aorubg Hofzel

Condition: new, Year of construction: 2025, operating hours: 380 h, functionality: fully functional, machine/vehicle number: 220.02.004.25, The machine was purchased in January 2025 / delivered in April / used from April to July 2025. For sale due to redundancy following a merger with another joinery. The machine is like new. It features an infeed table with an air cushion, Edgebanding width up to 60 mm and solid edging up to 6 mm thick. Edge thickness milling unit Hot melt granule gluing station Ncodpfx Aex Itpzofzel Edge trimming unit: ABS 2 mm / solid 6 mm Curve trimming unit for doors Surface scraper unit and edge scraper unit Cleaning unit 3 spray stations: antistatic / anti-scratch for edges / cleaning. Full details of all tools are listed on the attached purchase invoice.

Condition: used, Year of construction: 2004, used, excellent condition low operating hours from school use including slot mortising unit including transport and assembly trolley Make: Felder Model: AH751 Year of manufacture: 2004 GS certified CE type-certified GS wood dust tested Motor: 5.5 kW Planing width approx. 510 mm Planing height approx. 200 mm Table length approx. 2100 mm Bridge guard Table extension motorized brake Nodpex Ni Ehofx Afzocl Number of knives: 4 pcs Felder / Brück reversible knife system Feed: 6 + 12 m/min Digital display for planing height electric height adjustment with fine-tuning Integrated extraction hood Extraction connection: D 120 mm Required space: approx. 2100x1000x1100 mm Location: 97447 Gerolzhofen, loaded free on truck, unpacked Transfer in its current condition as inspected without warranty or guarantee

Condition: ready for operation (used), functionality: fully functional, Sale of a Complete Production Line for Aluminium Frames & Insect Screens Ideal for Window Manufacturers, Trade Businesses & Producers For sale is a fully coordinated set of machines and workshop equipment for the production of: - Aluminium frames for wood-aluminium windows - Renovation aluminium frames - Insect screen tension frames This equipment is suitable both for established companies aiming to expand their manufacturing depth and for start-ups or newcomers looking to acquire a ready-to-operate production line. Special Features: - Preferably sold as a complete package - Partial sale of individual machines possible - Field-proven, functionally coordinated machinery - Independent in-house production possible Ncjdpox Nbnhefx Afzjl - Significant cost savings compared to new purchases Training, Instruction & Know-how Transfer: On request, I offer the buyer personal training and onboarding. The goal is to share expertise accumulated over decades. Training can include: - Introduction to the complete production process - Optimal machine settings - Efficient manufacturing - Avoidance of common errors - Assistance during commissioning Buyer Benefits: - Immediate start of production - Reduction of dependency on suppliers - Expansion of product portfolio - High value creation - Know-how transfer included Reason for Sale: Sale is due to age and a career change. Further Information: - List of machines and details upon request - Scope of training by arrangement - Collection by appointment If interested, please get in touch. I am open to all inquiries and arrangements.

Condition: excellent (used), Year of construction: 2024, DEMONSTRATION MACHINE!! For sale: a used Felder membrane press MVP with a tiltable worktable. The machine is in like-new condition and has been serviced and inspected by our professional staff. (Fully functional) Technical data: - Worktable: 3290 x 1560 mm - HPL vacuum table with channels - 3 mm rubber membrane - Rotary vane vacuum pump - Undercarriage The membrane press is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: press, veneer press, pneumatic press Reference: R-D1618 Nedpfx Aoxzppbefzjcl

Condition: like new (used), Year of construction: 2022, DEMONSTRATION MACHINE!!! For sale is a used Felder thickness planer D9-51 with a thickness capacity of up to 254 mm. The machine is in like-new condition and has been refurbished and inspected by our professional technicians. (fully functional) Technical data: - Planing width: 504 mm - 4-knife cutter block (replaceable knives system) - Electric thickness table adjustment with LED display - Planing thickness: 4–254 mm Ncodpfx Aoxzph Dsfzjl - Variable feed rate: 4–16 m/min - Max. chip removal: 8 mm - 7.5 HP (5.5 kW) motor, 400 Volt - Year of manufacture: 2022 The planer is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: planer, thicknesser, thicknessing machine, Felder Reference: R-D1618

Condition: good (used), For sale is a mortising drilling carriage suitable for Felder machines from model year 1992 onwards. The drilling carriage is in good condition and has been reconditioned and inspected by our specialist staff. (Fully functional) Njdpexzglgofx Afzscl Technical data: - Incl. coupling and drive unit - With ADAPTER for SERIES 6 / 7 - Drilling height adjustment range: 135 mm - Drilling length: 250 mm - Drilling depth: 155 mm The machine is located in A-8561 Söding and can be inspected and collected at any time during our opening hours. Subject to prior sale! Related terms: pedestal drill, column drilling machine, drill Reference: R-D1618

Condition: like new (used), For sale is a used Felder K700 panel saw with a cutting width of 800 mm. The machine was only briefly in use for demonstration purposes at our facility. Therefore, it can be considered as new and comes with full warranty/guarantee. Nedpexzd Aiefx Afzscl Technical specifications: - Tilting circular saw 90-45° - Sliding table 1300 mm - Mitre fence 1100 mm - Cutting width 800 mm - 4 kW (5.5 HP) motor, 400 Volt - Machine no. 425.04.050.25 The machine is located at A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: saw, circular saw, panel saw, panel Reference: R-N1194