Used Felder Exact for sale (101)

Condition: excellent (used), Year of construction: 2024, operating hours: 279 h, functionality: fully functional, cutting length (max.): 3,200 mm, Well-maintained Format 4 Kappa 550 panel saw, acquired in 2024 as a refurbished demonstration unit. The machine’s actual year of manufacture is 2017. Equipped with a high-quality feature set. The main saw unit has only 279 operating hours (the scoring unit 22 h). Power: 10 kW Fpedpfox H Tydjx Afnsc Sliding table with X-Roll technology: 3,200 mm Electronically controlled height and tilt adjustment 0°–46° Saw blade diameter 250–550 mm, max. cutting height 202 mm Overhead guard, hood for 90° and hood for angled cuts E-motion control 15” color touchscreen display Electronically positioned rip fence with digital readout, cutting width 1250 mm Tools and replacement saw blades (main and scorer) included. #8455

Condition: excellent (used), Year of construction: 2024, DEMONSTRATION MACHINE!! For sale: a used Felder membrane press MVP with a tiltable worktable. The machine is in like-new condition and has been serviced and inspected by our professional staff. (Fully functional) Technical data: Fodpfx Afsxzppbenjpc - Worktable: 3290 x 1560 mm - HPL vacuum table with channels - 3 mm rubber membrane - Rotary vane vacuum pump - Undercarriage The membrane press is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: press, veneer press, pneumatic press Reference: R-D1618

Condition: like new (used), For sale is a used Felder K700 panel saw with a cutting width of 800 mm. The machine was only briefly in use for demonstration purposes at our facility. Therefore, it can be considered as new and comes with full warranty/guarantee. Technical specifications: - Tilting circular saw 90-45° - Sliding table 1300 mm - Mitre fence 1100 mm - Cutting width 800 mm Fpjdpfx Afexzd Aionsc - 4 kW (5.5 HP) motor, 400 Volt - Machine no. 425.04.050.25 The machine is located at A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: saw, circular saw, panel saw, panel Reference: R-N1194

Condition: like new (used), DEMONSTRATION MACHINE For sale is a Felder FD-21 dowel boring machine. The machine is in use in our showroom and is therefore in mint condition. Technical data: - Version with 21 spindles - 2 hold-down clamps - 2 stops, each 1.5 m, for line boring Fjdpfexxi T Uex Afnepc - 2 side stops with reading optics - Indexing system for side stop with 8 positions - Motor power: 2 HP - Year of manufacture: 2025 The machine is located in A-5431 Kuchl and can be inspected and picked up during our opening hours at any time. Subject to prior sale! Related terms: dowel milling machine, drilling machine, line boring Reference: R-A0117

Condition: like new (used), Year of construction: 2021, For sale is an almost new Felder thickness planer D9-51 with a planing height of up to 254 mm. The machine is on display in our showroom and is therefore in like-new condition. Fodpfoxxi Rtsx Afnopc Technical data: - Planing width: 510 mm - 4-knife cutterhead system - Thicknessing height: 3-254 mm - Thickness table length: 900 mm - Max. stock removal: 8 mm - Electrically adjustable thicknessing table with LED Power Drive display - Infinitely variable feed speed from 4-16 m/min - 7.5 HP (5.5 kW) motor - Star-delta starter - Exhibition machine, like new - Year of manufacture: 2021 The planer is located in A-5431 Kuchl and can be viewed at any time during our business hours. Subject to prior sale!

Condition: good (used), Year of construction: 2019, CNC through-feed center with dual clamp drive in X-direction and gantry design in Y-direction. The second gripper enables trimming down to 15 mm as well as continuous milling movement along the X-axis. The workpiece length is measured (X-direction) via sensor measurement. Working area: X-axis: 3,500 mm Y-axis: 950 mm Z-axis: 80 mm Milling spindle 12 kW HSK-F63, up to 24,000 rpm max. 4-position linear tool changer for milling tools. Fedpsxrahcofx Afnopc Max. tool diameter: 120 mm Max. tool length: 100 mm Single pick-up station for ergonomic insertion or removal of tools into the machine. Additionally usable as extra tool positions for up to 11 virtual tools. Automatic length measuring system for tools in Z-direction. Drilling head DH 25 8H 1S - 17 vertical spindles - 8 horizontal spindles - Grooving saw in X-direction Dowel insertion unit with 2 tools Dowel diameter: 8 mm, lengths: 20-25-30-35 or 40 mm Air cushion tables at front and rear, foldable Machine software WOODFLASH with: - CNC Board (general machine operation) - Tool database (Tecno-Manager) - Programming editor External workstation license Dongle upgrade: 3D simulator with collision check for WOODFLASH at the machine Release of workpiece at the rear side of the machine Machine is supplied without tools and HSK holders

Condition: used, functionality: fully functional, filter area: 50 m², nominal flow rate: 5,090 m³/h, noise level: 75 dB, extraction nozzle diameter: 300 mm, Technical data Fpsdpfjx H Stiox Afnsc Max. airflow 6000 m3/h Nominal airflow 20 m/s 5090 m3/h Nominal pressure 20 m/s At extraction speed 2680 Pa Extraction connection Ø 300 mm Cartridge filter - Filter surface 50 m2 Noise level 75 dB Chip container 2x250 l - With cartridge filter - With chip remover - With JET cleaning

Condition: new, Year of construction: 2022, functionality: fully functional, total width: 1,150 mm, total length: 2,275 mm, total height: 2,285 mm, noise level: 75 dB, extraction nozzle diameter: 300 mm, space requirement length: 2,640 mm, space requirement height: 2,985 mm, The Felder RL300 industrial extractor has been put up for sale due to the failure of the tender. Brand new, unopened packaging for 75% of the new price. Guaranteed, with commissioning Description: Air flow, max: 6000 m3/h Nominal air flow: 20m/sec, 5090 m3/h Fsdpfx Ajx H Srrjfnjpc Vacuum: 450 Pa Filter surface: 50 m2 Extraction nozzle diameter: 300 mm Modern, bright, clean design Great and efficient performance Chipboard storage Cartridge filter JET cleaning Year of manufacture: 2022

Condition: excellent (used), Year of construction: 2011, It is in perfect working condition, looks very good and has few operating hours. It has pre-milling, circular saw cutting, up and down milling, radius tickling, surface tickling, and polish. Fjdpfxexwqmao Afnepc

Condition: good (used), Year of construction: 2013, Panel saw Felder K 975 Cutting length: 3200 mm Cutting width: 1350 mm Max. cutting height: 130 mm (saw blade diameter: 400 mm) Saw blade and scorer tilting: 0-45° digital Saw blade and scorer height adjustment: digital Fpjdexl Dw Uspfx Afnoc Manual adjustable rip fence Activation of main saw blade and scorer from control panel and/or machine table Main motor for panel saw: 5.5 kW (7.5 HP) (adjustable 3500/4500/5500 rpm) Scorer motor for panel saw

Condition: excellent (used), Year of construction: 2010, 4 kW motor 4 knives Fpjdpfx Afjul Utmsnoc Table length 198 cm Table width 41 cm

Condition: excellent (used), Felder RL 250 Extraction Unit Capacity: 6200 m³/h Fedpjx A Exuofx Afnopc Extraction port: 250 mm Chip container capacity: 500 L Fire extinguishing system with water connection Motor: 5.5 kW Weight: 750 kg Very good condition

Condition: as good as new (ex-display), functionality: fully functional, overall weight: 850 kg, power: 5.52 kW (7.51 HP), input voltage: 400 V, input frequency: 50 Hz, grinding width: 650 mm, Further technical data Grinding height: 3 mm - 200 mm (250 mm) Grinding width: 650 mm Extraction connection: 2 x 120 mm Feed speed: infinitely adjustable 2.5 - 10 m/min Standard equipment - Maintenance interval control - Plain text error messages - Constant infeed height – fixed table, 900 mm - Electric height adjustment incl. fine adjustment from the control panel - Feed speed steplessly adjustable from 2.5 to 10 m/min via inverter at the control panel - Endless belt conveyor - Automatic feed mat centering - 1st brush unit with selectable steel brush, counter-rotating operation, mechanically preloaded rubber pressure rollers, 1 motor with 4 kW and cutting speed of 1000 rpm - 2nd brush unit with Tynex brush K60 D=200mm, counter-rotating operation, mechanically preloaded rubber pressure rollers, 1 motor with 4 kW and cutting speed of 1000 rpm - Dimensions: 1455 x 1070 x 1250 mm - Required air pressure: 6 bar Optional equipment 022 7.5 HP (5.5 kW) motor power, 1st unit Fedjw Axi Aspfx Afnjpc 024 7.5 HP (5.5 kW) motor power, 2nd unit 027 Oscillation control for 1st and 2nd brush units 028 Opening height 250 mm instead of 200 mm

Condition: as good as new (ex-display), functionality: fully functional, grinding width: 1,100 mm, grinding height: 170 mm, power: 14.71 kW (20.00 HP), grinding belt length: 1,900 mm, grinding belt width: 1,100 mm, input frequency: 50 Hz, input voltage: 400 V, Further technical data: Sanding height: 3 - 170 mm Extraction connection: 200 / 120 mm Standard equipment: - Star-delta starter - CE safety standards - Electrically controlled height adjustment of the feed table including fine adjustment from the control panel - Stepless feed speed from 2.5-18 m/min adjustable via inverter from the control panel - Hand guard and workpiece thickness safety device - Endless belt conveyor with honeycomb structure - Automatic feed belt centering - Control unit with 7" touch color display - 1st unit with rubberized, profiled contact roller, 85° Shore hardness Fpodpfjvf D S Ajx Afnjc - 2nd unit (sanding pad unit): The electro-pneumatic segmented sanding shoe with 25 mm segment width enables the independent processing of multiple workpieces for perfect veneer sanding. The standard time-controlled cleaning blower ensures maximum sanding belt service life, especially for lacquer sanding or very fine grit. - Digital grit compensation - Mechanically preloaded rubber pressure rollers - Sanding belt oscillation, electronic-pneumatic - Electronic sanding belt run-off protection - 1 motor with 15 kW (20 HP) including automatic star-delta start - Min. air pressure (bar): 6 Optional equipment: - Vacuum table with integrated blower in the machine frame - 15 kW (20 HP) motor including variable cutting speed from 2.4 to 19 m/sec - Double-sided roller table extension, 200 mm - Scotch Brite brush unit at the machine outfeed, D=150 mm - Switching contact for slide valve control; shut-off valves for extraction can thus be actuated. Including delivery and installation in postcode areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89

Condition: excellent (used), Felder kappa 400 format sliding table saw, format 4 Sliding table 320 cm, Blade tilt and height electrically adjustable Rip fence on the right, manually adjustable up to 1250 mm, Scoring saw 1.1 kW, Main motor 7.3 kW, 3 cutting speeds Max blade diameter 400 mm Scoring blade 120 mm, bore 20 mm Used machine, in very good condition. Fpjdpfx Ajx Arv Hjfnec

Condition: excellent (used), Felder A951L Jointer Max. planing width: 510 mm, Table length: 2700 mm Spiral cutterhead, Manual height adjustment of the infeed table with readout 5.5 kW motor, electric brake Fpodpfxex Anvij Afnjc Machine in very good condition, still on the original knives since new.

Condition: new, Year of construction: 2025, Band saw BS940RS3"SP V400/3/50 HP 20 CE CE VERSION Manual blade tensioning Standard equipment Self-braking motor 400 V/3/50 Reinforced twin-column base Steel blade tensioning system with guide lubrication system Front emergency stop activated via cable Rear emergency stop button Robust flywheels (1/3 crown in front) without rubber Bronze scrapers on flywheels Gravity blade lubrication system with felt pad Automatic star-delta starter Blade tension indicator Rack-and-pinion blade guide elevation with integrated blade guard Blade width: max. 90 mm Blade is not included This configuration includes: - Upper and lower blade guides with bronze side elements; Fedpfx Ajxzu Nmofnspc - Three-phase 400V/50Hz/20HP self-braking motor; - Horizontal transport pallet FEEDER RA260 ELP (SR026) V400/3/50*CE WE VERSION Pneumatic control – Electronic variable speed drive

Condition: good (used), Year of construction: 2023, For sale is a Felder RL-160 clean air extraction unit with a maximum airflow rate of 3200 m³/h. The extraction unit is in excellent condition and has been inspected and refurbished by our professional staff. (Fully functional) Technical data: - Max. airflow rate: 3200 m³/h - Filter area: 10 m² - Extraction connection diameter: 160 mm - Automatic filter cleaning - Antistatic filter - H3 dust tested - Year of manufacture: 2023 The clean air unit is located in A-5431 Kuchl and can be viewed at any time during our opening hours. Subject to prior sale! Related terms: clean air unit, extraction unit, dust extraction, clean air, RL Fedpfxoxnxm No Afnepc Reference: R-A0117

Condition: used, Year of construction: 2009, functionality: fully functional, working width: 950 mm, grinding width: 950 mm, - Austrian-made - Year of manufacture: 2009 - Combination pad (trzewik kombi) TECHNICAL PARAMETERS: - Sanding width: 950 mm - Sanding height: 4–170 mm - Main motor power: 11 kW - 1st unit: rubber drum with pneumatic engagement - Drum diameter: 110 mm - 2nd unit: combination pad (trzewik kombi) - Cleaning brush: 1.1 kW - Pneumatic engagement of rubber drum - Pad with pneumatic engagement - Pneumatic oscillation - Air blower on sanding belt - Electric height adjustment - Sanding belt speed controlled by inverter - Electronic positioning of sanding height - Two feed speeds: feed motor power 0.55 kW - Minimum workpiece length: 400 mm Fpsdpfxoxlr U Ij Afnsc - Extraction port diameter: 3 x 130 mm and 2 x 80 mm - Machine dimensions (L/W/H): 170 x 150 x 210 cm - Weight: approx. 800 kg

Condition: excellent (used), Year of construction: 2019, Edgebanding machine Manufacturer: Felder Model: Tempora 60.06, F600 Year of manufacture: 2019 Fully automatic operation from the control panel. Jointing unit: Yes End trimming unit: Yes Fpsdpfx Afjxix Hxsnsc Radius milling unit: Yes Radius scraper: Yes

Condition: used, Year of construction: 1993, functionality: fully functional, Panel saw, spindle moulder, combination machine, table saw, circular saw, carpenter’s saw, panel dividing saw, table router, tilting spindle moulder FELDER Model: KFS37 FL Year: 1993 Sliding table length: 245 cm Manual height adjustment of the saw blade Manual tilting of the saw blade up to 45° Rip fence with fine adjustment, up to approx. 75 cm Outrigger table with extendable crosscut fence Mitre fence Main motor power: 3 kW Tilting spindle moulder Manual height adjustment of the tilting spindle Manual tilting of the moulder spindle up to 45° to the rear Spindle diameter: 30 mm 3 spindle speeds, adjustable via belt Spindle can be lowered below table level and removed Spindle moulder motor power: 3 kW Cutter fence with fine adjustment and parallel guidance—Felder multi-adjustment system Fold-away support for power feeder Eccentric workpiece clamp Prior inspection is expressly recommended; please leave your telephone number by email and I will contact you to arrange a viewing appointment. Subject to prior sale. All information provided without guarantee. Machines can be collected in person or shipped by freight at the buyer’s expense. Loading and packaging can be organised by us. The quoted shipping costs are indicative; actual costs may vary depending on location and unloading facilities, please enquire. The item is offered under differential taxation. The displayed sales price is the gross final price. An invoice showing VAT separately will not be issued. Fpsdpfx Ajxycy Rjfnec Basis of warranty: Due to age and wear, sale is exclusively to commercial buyers with no warranty, guarantee, or return the claim. All information is without guarantee. By placing a bid, the buyer acknowledges this. For used items, warranty is 12 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, all warranties are excluded. For new items, warranty is 24 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, the warranty is 12 months.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 5,213 h, functionality: fully functional, machine/vehicle number: 302.09.016.16, travel distance X-axis: 4,010 mm, travel distance Y-axis: 1,970 mm, travel distance Z-axis: 455 mm, number of slots in tool magazine: 18, saw blade diameter: 350 mm, TECHNICAL DETAILS Number of axes: 5 Table dimensions (L × W): 5,000 × 1,550 mm X-axis working area: 4,010 mm Y-axis working area: 1,970 mm Fpsdpewkq Tpofx Afnjc Z-axis working area: 455 mm Travel speeds X-axis travel speed: 70 m/min Y-axis travel speed: 70 m/min Z-axis travel speed: 23 m/min Tool and saw unit Tool changer: 18 positions Saw blade diameter: 350 mm Extraction and vacuum Vacuum pump capacity: 90 m³/h Extraction connection diameter: 300 mm Extraction capacity: 5,100 m³/h MACHINE DETAILS Operating hours: 5,213 h Voltage: 400 V Current consumption: 46 A Air pressure: 8 bar Machine weight: 4,100 kg EQUIPMENT - Wood Flash software - 3D simulator included - Documentation available - CE marking present - Note: Vacuum pump bearings must be replaced

Condition: used, Felder AD 741 Surface and Thickness Planer Spiral cutter block Main motor 4 kW, Surface planer table length 2000 mm, Fpodpfx Aexxavmsfnec Planing width 410 mm, Thicknessing capacity height 230 mm, 1 feed speed, Manual thickness table adjustment with digital height indicator Machine ready for operation, quiet

Condition: excellent (used), Year of construction: 2017, Format circular saw Kappa 550 e-motion (Formatkreissäge) - 10 kW, 3 speeds: 3000/4000/5000 rpm - Year of manufacture: 2017 - Scorer operational display - Crosscut fence 3200 mm, swivels 90°–45°, 2 fence jaws - Extension table 1250 x 650 mm - "X-Roll" sliding table, cutting length 3200 mm, edging shoe - Position-controlled rip fence with digital readout in the operator panel at eye level, cutting width 1250 mm - Overhead guard: hood for 90° cuts and for angled cuts, height-adjustable and pivotable out of the working area Fjdpfx Afsw Tfahsnepc - e-motion control: 15" color touchscreen, operator panel at eye level, USB interface and prepared for network connection, adjustable and pivotable out of the working area - Saw blade diameter 250–550 mm, max. cutting height 202 mm - Position-controlled height and tilt adjustment 0°–46° - Table saw with table extension up to 1200 mm behind the saw axis, powder-coated steel - Weight: 1300 kg - Scorer operational display - Total operating hours: 443.47 h - Comes with many almost new saw blades and groove cutter blade

Condition: as good as new (ex-display), Year of construction: 2023, Exhibition Machine For sale is our Felder RL-125 clean air extraction unit from our showroom, with a maximum air volume flow of 1900 m³/h. The extraction unit is in like-new condition and has been inspected and serviced by our specialist staff. (Fully functional) Technical data: - H3 dust tested - Residual dust content < 0.1 mg/m³ - Max. air volume flow 1900 m³/h - Chip collection volume 200 litres - Year of manufacture: 2023 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Fodpfsxd Aitjx Afnjpc Reference: R-A0117-102