Used Forge Press for sale (26,986)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, controller model: Cybelec DNC 1200, bending force (max.): 250 t, working width: 3,550 mm, distance between stands: 3,000 mm, overall weight: 18,500 kg, TECHNICAL DETAILS Press force: 250 t Bending length: 3,550 mm Distance between uprights: 3,000 mm MACHINE DETAILS Controlled axes: y1, y2, x, r, z1, z2, back gauge tilt Hfodpfx Asx I Ebiehyjb Control unit: Cybelec DNC 1200 Dimensions & weight Footprint (L x W x H): approx. 4,300 x 2,750 x 3,750 mm Machine weight: approx. 18,500 kg EQUIPMENT Two-hand foot switch Lasersafe Fisseler Hydraulic tool clamping top and bottom Die shifting Hydraulic crowning Support arms 1 set of upper and lower tools Safety guard

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 9,874 h, bending force (max.): 173 t, working width: 4,250 mm, stroke length: 600 mm, throat depth: 420 mm, TECHNICAL DETAILS Press force: 1,700 kN Working width: 4,250 mm Stroke: 600 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,000 x 1,700 x 3,000 mm Total weight: 16,000 kg Hedpfxex R S S Hs Ahysfb Control type: CNC-controlled Press beam operating hours: 9,874 h EQUIPMENT 5-axis backgauge Hydraulic tool clamping (top/bottom) Die adjustment for bending CNC-controlled bending aid Bendguard safety system ACB angle measurement sensor Note: The machine is sold without tooling.

Condition: ready for operation (used), functionality: fully functional, bending force (max.): 125 t, stroke length: 120 mm, throat depth: 320 mm, distance between stands: 4,950 mm, travel distance X-axis: 800 mm, TECHNICAL DETAILS Bending capacity: 1,250 kN Rated forming force: 125 t Distance between uprights: 4,950 mm Throat depth: 320 mm Maximum height between table and ram: 380 mm Table length: 6,000 mm Table height above floor: 860 mm X-axis travel: 800 mm X-axis repeatability: ±0.01 mm Y-axis stroke: 120 mm Speed: max. 300 mm/s Ram rapid traverse: 120 mm/s Working speed: 5–15 mm/s Fast return: 80 mm/s MACHINE DETAILS CNC control: 2+1 axes Y + X + manual axes R + Z Dimensions and Weight Machine dimensions: 6,250 × 1,750 × 2,350 mm Machine weight: 13,550 kg Hydraulics Gear pump type: PGP3-40 Rated flow: 40 ml/rev Rated pressure: 21.5 MPa Oil tank volume: 250 l Hfedpfx Ahox Uptcjyeb Drive Motor type: Y160L-4P Supply: 400 V / 50 Hz Power: max. 11 kW Motor speed: 1,450 rpm

Condition: used, machine/vehicle number: 008256, Max width workable: 800 mm Max length workable: 2500 mm Max height workable: 1340 mm Hfedpfjx A Hfvjx Ahysb Max feed speed: 40 m/min

Condition: used, Charging Box Area: Dimensions: 72" Long x 30" Wide x 19" Deep Bale Size: Maximum: 12" x 6" x 15" Minimum: 12" x 6" x 4" Average: 12" x 6" x 6" Bale Weight: Aluminum: 20-60 lbs. Stainless Steel: 20-50 lbs. Copper: 60-120 lbs. Brass: 50-100 lbs. Total Average: 50 lbs. Machine Cycle Time (Exclusive of Loading Hopper): Cycle Time: 25 seconds Approximate Production Capacity (With Average Bale Weight 50 lbs): Capacity: Up to 1,152 bales (57,600 lbs or 28.8 tons) Based on an 8-hour shift and depending on loading conditions and operator. Compression Door: Total Force: 15.7 tons 1st Squeeze (Main Ram): Total Force: 48.1 tons Hfjdpfxjx Np Uvo Ahysb Side Squeeze (Final Compression): Total Force: 79.5 tons Vickers Power Unit: Oil Reservoir Capacity: 275 gallons Motor: 1-30 HP 3/60/220/440 Equipped With: Skip pan and bale ejector Dimensions: Overall Dimensions: 8'9" wide plus skip pan x 15'6" long x 5' high Approximate Weight: 18,000 lbs

Condition: used, Year of construction: 2006, color channels: 4, paper width (min.): 520 mm, paper width (max.): 520 mm, Heidelberg PM 52-4P Offset Printing Press PRICE: $39,000 USD Buyer is responsible for all rigging and dismantling within our facility. Buyer to arrange transportation after removal. Offered for sale is a well-maintained Heidelberg PM 52-4P, ideal for short to medium run commercial printing with fast makeready and excellent color consistency. Hfjdsx Tcx Nspfx Ahyjb - 79 million impressions - One owner since new - Complete maintenance history, fully documented and serviced exclusively by Heidelberg technicians - Regular preventive maintenance performed to manufacturer standards - Classic Console, Easy Plate, Auto Roller Washers, Auto Blanket Washer The press has been serviced by Heidelberg its entire life. We have the full service history on the machine.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, controller model: Cybelec DNC 800, bending force (max.): 160 t, working width: 3,000 mm, distance between stands: 2,650 mm, overall weight: 16,000 kg, TECHNICAL DETAILS Press force: 160 t Bending length: 3,000 mm Frame gap (distance between uprights): 2,650 mm MACHINE DETAILS CNC axes: y1, y2, x, R Control: Cybelec DNC 800 Hodex I D T Rjpfx Ahysfb Machine weight: approx. 16 t EQUIPMENT Two-hand foot switch Hydraulic top tool clamping Hydraulic crowning Hydraulic bottom tool clamping 5 manually adjustable backgauge fingers Die shifting Tool package Side safety doors

Year of construction: 1994, condition: good (used), machine/vehicle number: GCHREIS, SPECIFICATIONS: Capacity: 224 Ton Table Size: 71" lr x 98" fb Swivel Platen Size: 71’ lr x 98” fb Hfedpfel Ayc Tjx Ahyjb Stroke: 71” Daylight Opening: 98” Distance Between Columns: 74” lr Table Capacity: 67,442 pound force Swivel Platen Capacity; 26,977 pound force Oil Reservoir Capacity: 153 Gallons Motor: 25.3 Kw (approx 33 HP) 41 amps / 1755 rpm Power: 480 v/3ph/60cy Approx Floor Space required: 322.83” lr x 133.85” fb Approx Overall Height: 261.5” Above Floor: 233.8" Approx Overall Weight: 103,617# EQUIPPED WITH: Press Controls Console Top Mounted Hydraulics Roll Out Bolster (Table) Tilt Down Ram (180º) SPECIFICATIONS SUBJECT TO VERIFICATION

Condition: used, Year of construction: 1992, pressure 80 t stroke 40 mm no. of strokes 60-300 Hub/min table surface area 730x750 mm weight of the machine ca. 14 t Hedpewz Rv Esfx Ahysfb

Condition: used, machine/vehicle number: 008254, Max width workable: 700 mm Hedpfx Aex A Hfpshyjfb Max length workable: 2600 mm Max height workable: 1300 mm

Condition: new, functionality: unexamined, Year of construction: 2024, machine/vehicle number: 16.41-PS0382, control type: CNC control, degree of automation: automatic, actuation type: electric, sheet thickness (max.): 8 mm, input voltage: 400 V, input current: 20 A, type of input current: three-phase, 2024 Pima Power PS 1225 Brand new Complete machine. Hfjdjw Nbh Hjpfx Ahyeb Machine was tipped on its side during transit and was damaged. Machine is stored in Our warehouse in California USA. Contact to set up in person inspection.

Year of construction: 2018, condition: good (used), functionality: fully functional, in total 7 FMTM250-7HS-32P FUSEI mold presses, year of manufacture 2011-2018, and also some Fujiwa mold presses, vintage 2002-2005 available Hfedpfx Ahexniklsysb

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1995, controller model: CYBELEC DNC 880S, bending force (max.): 100 t, working width: 2,050 mm, overall weight: 8,000 kg, TECHNICAL DETAILS Pressing force: 100 t Bending length: 2,050 mm MACHINE DETAILS Controlled axes: Y1, Y2, X, R, Z1, Z2, X1 Control: CYBELEC DNC 880S Hedpfox I D Saex Ahyefb Dimensions & weight Dimensions: 2,650 x 2,600 x 2,700 mm Weight: 8,000 kg EQUIPMENT Hydraulic Wila upper clamping Motorized crowning

Condition: used, Year of construction: 1984, pressure 1000 t Hodpfsyacpaox Ahysfb stroke 200 mm total power requirement 30 kW weight of the machine ca. 8 t multiple images available

Condition: used, Press Brake Brand: LVD Hedpfx Ahsx Tqt Usysfb Capacity: 3000 x 135T Model: PPBL 135/30 Distance between uprights: 2550 mm Throat depth: 200 mm Stroke: 130 mm Working speed: 8 mm/s Number of backgauge axes: 2 Motor power: 8.5 kW

Condition: used, Year of construction: 1992, total length: 3,920 mm, total width: 2,180 mm, total height: 2,290 mm, Weight: 6.000 kg - Year: 1992 - Documentation available: No - CE certificate present: No - Serial number: 57090 - Drive system: Teach-in - Control system brand: HACO - Control system type: ATL 550 - Power [kW]: 7.5 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 135 - Max. working width [mm]: 3600 - Column gap [mm]: 3050 - Backgauge depth [mm]: 1000 - Crowning system: None - Punch holder: Standard - Transport dimensions: 3920mm x 2180mm x 2290mm (l x w x h) - Transport weight [kg]: 6000kg Hjdpfex Up Rzox Ahyefb - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1989, controller model: Cybelec DNC 60, bending force (max.): 50 t, working width: 2,050 mm, Equipment: foot remote control, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press force: 50 t Bending length: 2,050 mm MACHINE DETAILS Controlled axes: Y1, Y2, X, R Control unit: Cybelec DNC 60 Weight: 7,000 kg EQUIPMENT Foot pedal Hydraulic upper tool clamping Hjdpsx I D E Hjfx Ahysfb 2 manually adjustable backgauge fingers Tooling

Condition: used, Year of construction: 1999, hydraulic ja 100 t Hfodpfx Ajx U A Tvjhyob weight of the machine ca. 2,9 t

Condition: used, Year of construction: 1980, control panel Boschert Stanze Year 1990 Hfjdsx U A H Nopfx Ahyob +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1999, pressure 30 t Hjdpfx Ahevanvzsyjfb plate thickness 800 mm keins weight of the machine ca. 1,3 t

Condition: used, Year of construction: 1970, pressure 40 t Hfedpfx Ahsvxltboyob stroke 150 mm serial number 100091 2 Druck & Hub verstellbar pressure 25 t weight je 1,5 t safety light frame ja bei beiden

Condition: good (used), Year of construction: 1987, fabric-no. 202 395 working length 2550 mm Hodoq Awh Ropfx Ahyjfb output 2000 KN tracking travel 13 mm safety distance 176 mm

Condition: used, Year of construction: 1994, Hans Schoen NH65 pressure 65 t Hjdpsvrk Epofx Ahysfb +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1980, . 52965 pressure 10 t oil contents 110 Liter Hsdpfxovxlr Dj Ahyefb +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1970, ja weight of the machine ca. 9,5 t serial number 10457/2 160000 KG stroke of worktool slide 41 Hub/min +++++ Hodpfx Ahevvx Exoyjfb Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++