Used Friction Screw Press for sale (16,449)

Condition: good (used), Year of construction: 2011, MANUFACTURER: ATLASCOPCO MODEL: GA160VSD Hodjygx U Sspfx Abrsnh S/N: APF163595 YEAR: 2011 POWER (kW): 186 CAPACITY (m3/min): 4.82–18.36 PRESSURE (bar): 10 HOURS (DOC/TOTAL): FREQUENCY INVERTER: yes

Condition: used, Year of construction: 1998, feed pressure 8 bar liter capacity 1,65 m³ / min dimensions 1000 x 750 x 950 mm total power requirement 11 kW Hnedeqa Tw Njpfx Abreh weight of the machine ca. 175 kg

Year of construction: 1997, condition: used, feed pressure 10 bar liter capacity 1400 m³ / min Hodpfx Ajqvcldebrsnh dimensions 700 x 550 x 1100 mm total power requirement 11 kW weight of the machine ca. 275 kg

Condition: like new (used), Year of construction: 2023, feed pressure 10 bar Hodexcuh Eepfx Abrjnh liter capacity 1,00 m³ / min air pressure container 250 l motor speeds: 3000 U/min dimensions 1915 x 650 x 1640 mm total power requirement 7,5 kW weight of the machine ca. 410 kg

Condition: as good as new (ex-display), Year of construction: 2023, feed pressure 10 bar liter capacity 0,736 m³ / min Hnjdpfx Abjxcuwtsreh air pressure container 270 l motor speeds: 1500 U/min dimensions 1815 x 910 x 1594 mm total power requirement 5,5 kW weight of the machine ca. 375 kg

Condition: used, Year of construction: 2022, feed pressure 10 bar liter capacity 2,71 m³ / min motor speeds: 3000 U/min Hnodpfxjwq Sz Ie Abrjh dimensions 1300 x 1000 x 1900 mm total power requirement 18,5 kW weight of the machine ca. 500 kg Features: - Focus Control 2.0 control system - Network pressure sensor - Belt-driven drive system - Soundproofed

Condition: used, Year of construction: 2005, feed pressure 10 bar Hnedpfxjvuz Rhe Abroh liter capacity 2,66 m³ / min total power requirement 18,5 kW motor speeds: 3000 min/1 dimensions 1200 x 900 x 1200 mm weight of the machine ca. 150 kg

Condition: used, Year of construction: 1997, feed pressure 7,5 bar liter capacity 0,6 m³/min motor speeds: 3000 U/min total power requirement 4 kW Hnedpfewrztisx Abreh weight of the machine ca. 350 kg dimensions of the machine ca. 1800 x 650 x 1300 mm

Condition: good (used), overall weight: 1,200 kg, volume flow: 890 m³/h, Manufacturer: Worthington Model: RLR100V6 Hedpfx Abjuf Nibsronh Max. working pressure: 9,5 Bar Power: 100Hp / 75KW 75 kW screw compressor with frequency inverter, with a flow rate of 880 m3/hour. Flow rate: 890 m3/hour. Three-phase 380V 3000 rpm Weight: 1200 kgs.

Condition: good (used), Screw compressor, compressor, compressed air unit, stationary compressed air compressor Hnsdpfxswu Axls Abroh -Manufacturer: Demag / CompAir, screw compressor type 350WS / EK285NK without drive motor -Volume flow: 35.1 m³/min -Max. pressure: 7 bar -Drive shaft: Ø 90 x 120 mm -Individual components: see photos -Dimensions: 1100/670/H1000 mm -Weight: 1032 kg

Condition: good (used), Year of construction: 1992, screw compressor, compressor, compressed air unit, stationary compressed air compressor Hnedpfx Abovuy Nvsreh -Manufacturer: Ecoair, screw compressor type STKL 30 B 18.5 -Volume flow: 2.5 m³/min -Engine power: 18.5 kW -Operating hours: 2,746 h -max. pressure: 10 bar -Inlet: 580 x 250 mm -Outlet: 740 x 250 mm -Individual components: see photos -Dimensions: 1100/1000/H1070 mm -Weight: 362 kg

Year of construction: 1999, condition: used, Compressed air tank, pressure container, pressure tank, compressed air boiler, pressure vessel, compressor tank, pressure accumulator for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Boge, pressure accumulator with filter block from compressor type SL 270 -Pressure accumulator: Type 306022 V 230 L -Final pressure: max. 15 bar Hnodpfepm Thzex Abreh -Hole circle: Ø 240 x 22 mm -Filter units: see photos of individual components -Dimensions: 1600/980/H1270 mm -Weight: 289kg

Year of construction: 2000, condition: used, Screw block for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Boge, screw block compressor stage from compressor type SL 270 -Screw block: type BS 430 -Final pressure: max. 15.0 bar -Hole circle: Ø 295 mm / M20 / Ø 740x22 mm Hnodjpm Thtopfx Abrjh -Shaft: Ø 100 x 200 mm -Dimensions: 1200/850/H790 mm -Weight: 917 kg

Condition: used, Gate valve for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Boge, gate valve from compressor type SL 270 Hedpfxoppdh Do Abronh -Solenoid valve: type 644.0044.01 -Final pressure: max. 14 bar -Hole circle: Ø 295 x 22 mm -Dimensions: 415/340/H440 mm -Weight: 25kg

Condition: used, Screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw compressor, suction regulator relief valve, relief valve -Manufacturer: Boge, screw compressor intake regulator relief valve from compressor type SL 270 -Type: 644 0041 01 -Pressure: 0.5 - 10 bar bar -Dimensions: 195/100/H140 mm Hodpfx Abjppdhnersnh -Weight: 2.0 kg

Condition: used, Year of construction: 2015, operating hours: 4,560 h, functionality: fully functional, machine/vehicle number: WKA0F1600F5493024, fuel type: diesel, operating pressure: 12 bar, Equipment: type plate available, KAESER COMPRESSOR M100 12BAR Mobile compressor KAESER M100 with integrated air dryer (aftercooler) Technical specifications: Operating pressure: 12 bar; 7.20 m³ per min Year of manufacture: 2015 Hedpsygmtiefx Abrenh Condition: Very good, slight signs of use, regularly serviced All filters and oils replaced; new starter; new brakes; new inspection (TÜV) Engine and compressor in excellent condition Collection only

Condition: ready for operation (used), Year of construction: 1990, operating hours: 24,038 h, functionality: fully functional, machine/vehicle number: 12698, power: 30 kW (40.79 HP), fuel type: electric, volume flow: 4 m³/h, Equipment: type plate available, BOGE screw compressor from production hall. Hjdjyf Hggjpfx Abrsnh

Condition: good (used), The screw compressor is sold because the workshop was dissolved. It has been regularly maintained and is available immediately , it is still under power and can be viewed and tested for function. Including air tank Hodehgvwqspfx Abrsnh

Condition: new, overall weight: 340 kg, volume flow: 1.44 m³/h, Atlas Copco G11FF screw compressor Specifications: - condition - New - manufacturer - Atlas Copco - capacity - 1440 l/min - main engine power - 11,0 kW - tank - 500 l - maximum operating pressure - 10.00 atm - built-in refrigeration dryer - electronic setting of compressor operating parameters - soundproofed cabin (only 67 dB) - meets CE standards - weight - 340 kg Hnjdpfx Ajh Unupebroh Additional information: - possibility to obtain a manufacturer's warranty after commissioning by an authorized Atlas Copco service center - instruction manual in Polish and a set of documents for the Office of Technical Inspection - available immediately or within 7 working days

Condition: used, Year of construction: 2000, overall weight: 3,860 kg, CompAir screw compressor Model: Champion 180 Year of manufacture: 2000 Intake pressure: 1 bar Stage pressures: 2.2 / 12 bar Volume flow: 17 m³/min Engine power: 110 kW The compressor is in working order and was regularly serviced and inspected until it was decommissioned. Hnsdpfx Absu Rn Ngoroh

Condition: used, Year of construction: 2015, overall weight: 4,000 kg, total length: 3,435 mm, total width: 1,750 mm, total height: 2,385 mm, power: 200 kW (271.92 HP), volume flow: 28.5 m³/h, pressure (max.): 10 bar, noise level: 81 dB, Equipment: type plate available, KAESER DSG 290-2 oil-free screw compressor Hnsdju Rnziopfx Abrjh Manufacturer: KAESER Model: DSG 290-2 Year of manufacture: 2015 Volume flow: 28,5 m³/h Compressor motor: 5.5 kW Protection class: IP55 Mains frequency: 50 Hz The compressor was in use until recently and is in good condition. The device can be inspected on site by arrangement.

Condition: used, Year of construction: 1997, overall weight: 2,480 kg, power: 75 kW (101.97 HP), CompAir screw compressor Model: Champion 135 Year of manufacture: 1997 Hodpsu Rn Hrefx Abronh Intake pressure: 1 bar Stage pressures: 1.8 / 7 bar Volume flow: 12.8 m³/min Engine power: 75 kW The compressor is in working order and was regularly serviced and checked until it was decommissioned.

Condition: new, Year of construction: 2026, Set including the LUFT 1000 VSD+PM screw compressor, a vertical 1000-liter compressed air tank with fittings, and the IZBERG N10S air dryer. The LUFT series screw compressor from the Polish brand CORMAK represents state-of-the-art pneumatic solutions combined with high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high efficiency guarantee effective and trouble-free operation. Compressor Technical Specifications Motor power: 7.5 kW / 11 HP Voltage: 400 V / 50 Hz Air delivery at 0–6 bar: approx. 990 L/min Air delivery at 6 bar: 990 L/min Air delivery at 8 bar: 950 L/min Air delivery at 10 bar: 950 L/min Hedpeyguy Dofx Abronh Outlet connection (G): 3/4" Dimensions: 900 × 620 × 820 mm Weight: 110 kg IZBERG N10S Air Dryer – Technical Specifications Inlet / outlet connection (BSP): 1" Maximum working pressure: 10 bar Maximum inlet air temperature: ≤ 38°C Pressure dew point: 3°C Capacity: 1500 L/min Power: 0.58 kW Supply voltage: 230 V Dimensions (L × W × H): 380 × 600 × 625 mm Weight: 31 kg Refrigerant type and quantity: R134a, 400 g 1000 L Vertical Tank – Technical Specifications Weight: 230 kg Number of connections: 6 Connection sizes: 2", 1/2" Overall dimensions: 230 × 80.8 cm Tank capacity: 1000 L Working pressure: 11 bar Wall thickness: 4 mm Diameter: Ø 808 mm Height: 2300 mm Tank Accessories 1/2" plug – 2 pcs 1/2" nipple – 1 pc 1/2" tee fitting – 1 pc 1/2" to 1/4" reducer – 1 pc 1/4" pressure gauge – 1 pc 1" to 3/4" reducer – 2 pcs 1/2" ball valve – 1 pc Important Notice The accessory set does not include a safety valve. A suitable safety valve must be purchased and installed separately by the user.

Condition: new, Year of construction: 2026, Set including the LUFT 700 VSD+PM screw compressor, a vertical 200-liter compressed air tank with fittings, and the IZBERG N10S air dryer. The LUFT series screw compressor from the Polish brand CORMAK represents state-of-the-art pneumatic solutions combined with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high efficiency guarantee effective and trouble-free operation. Compressor Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400 V / 50 Hz Air delivery at 0–6 bar: approx. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 800 × 520 × 740 mm Weight: 95 kg IZBERG N10S Air Dryer – Technical Specifications Inlet / outlet connection (BSP): 1" Maximum working pressure: 10 bar Maximum inlet air temperature: ≤ 38°C Pressure dew point: 3°C Capacity: 1500 L/min Power: 0.58 kW Supply voltage: 230 V Dimensions (L × W × H): 380 × 600 × 625 mm Weight: 31 kg Refrigerant type and quantity: R134a, 400 g 200 L Pressure Tank – Technical Specifications Weight: 80 kg Number of connections: 6 Connection sizes: 1/2", 1", 2" Overall dimensions: 166.5 × 45 cm Tank capacity: 200 L Working pressure: 11 bar Wall thickness: 4 mm Diameter: Ø 450 mm Height: 1665 mm Included Accessories 1/2" plug – 2 pcs 1/2" nipple – 1 pc 1/2" tee fitting – 1 pc 1/2" to 1/4" reducer – 1 pc 1/4" pressure gauge – 1 pc 1" to 3/4" reducer – 2 pcs Hnsdpoyguq Ajfx Abroh 1/2" ball valve – 1 pc Important Notice! The accessory set does not include a safety valve. A suitable safety valve must be purchased and installed separately by the user.

Condition: new, Year of construction: 2026, Set including the LUFT 700 VSD+PM screw compressor and a vertical 200-liter compressed air tank with fittings. The LUFT series screw compressor from the Polish brand CORMAK represents state-of-the-art pneumatic solutions combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high efficiency guarantee reliable and trouble-free operation. Compressor Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400 V / 50 Hz Hnjdjyguirjpfx Abreh Air delivery at 0–6 bar: approx. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 800 × 520 × 740 mm Weight: 100 kg 200 L Pressure Tank – Technical Specifications Weight: 80 kg Number of connections: 6 Connection sizes: 1/2", 1", 2" Overall dimensions: 166.5 × 45 cm Tank capacity: 200 L Working pressure: 11 bar Wall thickness: 4 mm Diameter: Ø 450 mm Height: 1665 mm Important Notice! The accessory set does not include a safety valve. A suitable safety valve must be purchased and installed separately by the user.