Used Golf Course for sale (918)

Condition: used, Riding Lawn Mower ETESIA Type Hydro 124 D Year of manufacture: 2003 Power: 15.5 kW Cutting width: 1240 mm Grass catcher: 600 liters = over 100 kg of grass Turning radius: 1250 mm Travel and working speed: max. 16 km/h 3-cylinder Lombardini FOCS 903 diesel engine Displacement: 916 cm³ Power: 22 HP at 3600 rpm - Water-cooled - Two counter-rotating blades, 65 cm long with a 6 cm overlap - The powerful suction lifts the grass upright before cutting - Central rear discharge - Hydraulic high-tip emptying, controlled from the driver's seat via toggle switch - Electric cutting height adjustment from 44 to 140 mm - Hydrostatic drive with rear-wheel drive via hydraulic motors - Hydraulic differential lock - Hydraulic power steering - Twin hydraulic connections for operation of front-mounted attachments Lsdjy Ai Ntopfx Akqshn - Adjustable steering column - Hour meter: 1,539 operating hours Overall width: 1,280 mm Length: 2,800 mm Weight: 716 kg Good condition

Condition: excellent (used), I am offering for sale a professional Bohm Wiedenmann Super 300 sweeper-collector with a working width of 1.5 m. This machine is designed for collecting cut grass, leaves, branches, thatch after scarification, and other debris from green areas, sports fields, parks, golf courses, and large lawns. The Super 300 model is highly regarded for its robust construction and high performance. Technical data: Lhsdpfx Akjz Sngaeqen * Manufacturer: Bohm Wiedenmann GmbH * Model: Super 300 1.5 * Year of manufacture: 1998 * Working width: 1.5 m * Permissible total weight: 1450 kg * Permissible axle load: 1250 kg * Permissible drawbar load: 200 kg * Maximum transport speed: 40 km/h * PTO shaft * Large collection container * Hydraulic control The machine shows normal signs of wear and tear consistent with its age. It is being sold in the exact condition as shown in the photos.

Condition: used, fuel type: electric, fuel: electricity, Year of manufacture: 2022 Lhjdpjzvpqbsfx Akqsn Year of construction: 2022 Manufacturer: Clubcar heulweg 44 2295 KG KWINTSHEUL, US

Condition: used, fuel type: electric, fuel: electricity, Manufacturer: Clubcar US Lsdpezni Rfofx Akqjhn

Condition: used, fuel type: electric, fuel: electricity, Year of manufacture: 2022 Ljdpezwgl Sofx Akqjhn Year of construction: 2022 Manufacturer: clubcar heulweg 44 2295 KG KWINTSHEUL

Condition: used, mileage: 289 km, fuel type: electric, fuel: electricity, Year of manufacture: 2024 Lhedjznmhnopfx Akqsn Year of construction: 2024 Manufacturer: Yamaha US

Condition: used, fuel type: diesel, fuel: diesel, Year of manufacture: 2015 Year of construction: 2015 Manufacturer: JCB GB Lhedpfezu Sb Hex Akqjn

Condition: used, fuel type: electric, first registration: 03/2011, fuel: electricity, wheelbase: 2,500 mm, Year of construction: 2011 Empty weight: 474 kg Carrying capacity: 775 kg Lodpfx Akszni Hgjqehn GVW: 1.249 kg Number of seats: 4 Reserved: This vehicle is reserved for a customer (provisionally sold). Price: On request Manufacturer: Melex PL

Condition: new, Year of manufacture: 2025 Ljdpfjzni I Dsx Akqjhn Year of construction: 2025 Manufacturer: frisian AF

Condition: excellent (used), functionality: fully functional, power: 17.65 kW (24.00 HP), fuel type: diesel, gearing type: hydrostat, Year of construction: 2015, operating hours: 530 h, Dvorak SPIDER ILD-02 Radio-controlled Large-area mower / Slope mower Technical information according to the manufacturer: Spider large-area and slope mower Areas of application: The remotely controlled SPIDER ILD is designed for maintaining uneven and difficult-to-access areas with slopes of up to 40° (with an optional cable winch, up to 55°). The mower is not only ideal for rough terrain, overgrown areas, and unkempt lawns but also for well-maintained parks. It is invaluable, especially for maintaining ditches around roads, cutting grass in orchards and nurseries, landfills, areas around power plants, airports, or mountain hotels, ski slopes, parks, and military areas. In addition, it can be used in agriculture and is often used for mowing golf courses and other sports facilities. Thanks to its unique drive system, it is very well suited for maintaining the surrounding terrain of reservoirs, rivers, and dams. The machine's exceptional environmental friendliness results from its low weight and soil-friendly drive system. The 4-wheel drive enables the mower to be used in wetlands and protected nature reserves. Mowing system: Mulching system Control: Radio remote control Cutting width: 123 cm Cutting height: Adjustable from 90 - 140 mm Cutting system: 4 blade bars with 8 blades Area output: Ø 3,500 m²/h | max. 7,000 m²/h Engine: Kawasaki FS 691V | 2 cylinders Engine power: 17.6 kW | 24 hp | 726 cc Transmission: Hydrostatic transmission 0 - 8 km/h Hour meter: Yes Mowing clutch: Electromagnetic with brake Drive: 4-wheel drive Ledpfxeztp Smj Akqshn Steering: 4-wheel steering Wheels: Continuously rotatable by 360° Tires: 16 x 6.50 | V-profile Tank capacity / consumption: 16 liters / 3 - 3.8 l/h Weight: 335 kg Dimensions: 1640 x 1430 x 920 mm This SPIDER ILD02 with a cable winch was first commissioned in 2015, has 530 operating hours according to the meter, and is in a well-maintained overall condition with the usual signs of wear and tear for this class of equipment. The service has been recently performed, and it is ready for immediate use! - Net price: €15,882 / Gross price: €18,900 - Inspection / test drive is possible - Shipping costs nationwide (except islands): €400 - We would be happy to have our leasing partner prepare an attractive leasing/financing offer for you!

Condition: excellent (used), functionality: fully functional, power: 30.16 kW (41.01 HP), color: green, fuel: diesel, Year of construction: 2021, operating hours: 360 h, Equipment: all wheel drive, car registration, Roberine F3 base machine with the following features: Engine: 3-cylinder Yanmar turbo diesel engine 30 kW (41 hp) at 2650 rpm Displacement 1500 cm³ Fuel tank 45 liters – sufficient for a full day’s work Speed: Mowing: Forward 13 km/h Reverse 9 km/h Transport speed: Forward 25 km/h Reverse 9 km/h STANDARD EQUIPMENT: 12V socket Cruise control Command arm Weight transfer system Standard delivery with a maximum speed of 20 km/h Traction and Drive Drive: Automatic hydraulic four-wheel drive (Drive by Wire) Mowing system: Hydraulic axial piston pump for the mowing units Hydraulic tank: Capacity 55 liters with oil level sight glass Tires, Brakes and Steering Front tires: Vredestein Greentax Turf 320/55 – 12 (26x12-12 8 PR) Rear tires: Vredestein Greentax Turf 250/50 – 10 (20x10-10 6 PR) Braking system: Maintenance-free hydrostatic braking system Parking brake: Maintenance-free disc parking brake on the front wheel motors Steering: Fully hydraulic rear-wheel steering including adjustable steering column Track width 150 cm Seat: Standard fully adjustable, comfortable air-suspension Grammer seat with automatic weight adjustment and control lever Indicators: Dashboard warning lights: Battery, engine oil pressure, cruise control, turn signals, low fuel level in tank, coolant and hydraulic oil temperature Indicators: Fuel level indicator, hydraulic oil level sight glass, digital hour meter Weight and Dimensions: Overall length: 280 cm Lhjdszhkk Tepfx Akqen Height: 234 cm with ROPS / 166 cm with ROPS folded down Overall weight without cabin: 1225 kg with ROPS Certifications F3 and R3: Certified according to CE Machinery Directive, protective device on the front of the two front flail mowing units ISO 17101-2, certified according to ISO 21299 for ROPS, STVZO-TÜV With the following options: MOWING UNITS ROBERINE F3 Number of mowing units: 3 independent, hydraulically driven flail mowing units through axial piston motors 3500 min-1 Mowing unit configuration: Fixed flail mowing unit with 12 flails Diameter 25 cm Equipped with a 3" support roller Mowing width: Variable 77 cm – 215 cm Height adjustment: 25 mm – 85 mm Weight transfer system: Electrically operated for better traction through weight transfer from the mowing units to the wheels ROPS frame Set, reversible fan Reverse fan for optimally clean ventilation grille in the hood Set, deflector Set, lighting kit (required for STVZO) Set, rotating beacon (frame) Set, protective covers for cutting units (required for road travel) Subject to changes, typing errors, errors and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any warranty or guarantee.

Year of construction: 2007, condition: good (used), fuel type: electric, Golf car CLUBCAR PRECEDENT, 4-seater golf cart, 2007, with charger. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition, without guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Lsdpfx Aksz Rvfteqshn Please call beforehand, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Year of construction: 2007, condition: good (used), fuel type: electric, Golf car CLUBCAR PRECEDENT, 4-seater golf cart, 2007, with charger. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition, without guarantees (see our general terms and conditions). Lhjdpfx Aez Rvfyokqjn You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Year of construction: 2004, condition: good (used), Golf car CLUBCAR PRECEDENT, 2-seater golf cart, 2004, with charger, blue. A video can be sent via WhatsApp. Ljdpfx Aozz Sbgskqshn We have a continuous supply; please see our website. Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition, without warranties (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call in advance as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Rotating Boring Table Travel X: 2000 mm Table size: Length 1240 mm x Width 1250 mm Bench width: 1030 mm Diameter of the ball screw: Ø 70 mm 2 motors INDRAMAT: 1 travel X motor + 1 table rotation motor Supplied without electrical panel (electrical cabinet to be redone) Protector hennig in average condition Ideal part for retrofitting Total bench length: 5200 mm Width: 1900 mm Lhedpfx Aksz Nxmksqon Height: 900 mm Weight: approx 7 T

Condition: as good as new (ex-display), functionality: fully functional, power: 32.36 kW (44.00 HP), fuel type: diesel, color: green, first registration: 10/2024, fuel: diesel, driver cabin: day cab, gearing type: automatic, emission class: euro5, Year of construction: 2024, operating hours: 221 h, Equipment: air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, immobilizer system, navigation system, ROBERINE F302 DEMONSTRATION UNIT EQUIPPED WITH THE LATEST EXHAUST TECHNOLOGY, EXHAUST EMISSION LEVEL V WITH CABIN AND AIR CONDITIONING FIRST REGISTRATION 07/03/2024 CURRENTLY WITH 221 OPERATING HOURS AND 121 WORKING HOURS! Engine: 3-cylinder Yanmar Turbo Diesel engine Exhaust emission level V 32 kW (44 hp) at 2,700 rpm Displacement 1,568 cm³ Fuel tank 45 liters – sufficient for a full day’s work Speed: Mowing: Forward 13 km/h Reverse 9 km/h Transport speed: Forward 25 km/h, optionally 20 km/h Reverse 9 km/h STANDARD EQUIPMENT: 12V socket Cruise control with memory function Command arm with LCD display: everything can be operated with one hand Weight transfer system Standard delivery with a maximum speed of 25 km/h Traction and Drive Drive: Automatic hydraulic four-wheel drive (Drive by Wire) Mowing system: Hydraulic axial piston pump for the mowing units Hydraulic tank: Capacity 55 liters with oil level sight glass Automotive driving with ECO mode: lower diesel engine speed, resulting in less noise, fuel consumption and emissions ECO mode mowing operation: lower diesel engine speed, resulting in less noise, fuel consumption and emissions Double foot pedal with greatly optimized driving characteristics Tires, Brakes and Steering Front tires: Vredestein Greentax Turf 320/55 – 12 (26x12-12 8 PR) Rear tires: Vredestein Greentax Turf 250/50 – 10 (20x10-10 6 PR) Braking system: Maintenance-free hydrostatic braking system Electric parking brake, switch on the command arm Fully hydraulic rear wheel steering including adjustable steering column Seat: Standard fully adjustable, comfortable air-suspension Grammer seat with automatic weight adjustment and control levers Displays: Dashboard warning lights: Battery, engine oil pressure, cruise control, turn signals, low fuel level in the tank, coolant and hydraulic oil temperature Displays: Fuel level indicator, hydraulic oil level sight glass, digital hour counters Weight and Dimensions: Overall length: 280 cm Height: 221 cm with cabin and air conditioning Total weight with cabin: 1,460 kg F302 Certifications: Certified according to CE Machinery Directive, protective device ISO 17101-2, certified according to ISO 21299 for ROPS, STVZO-TÜV MOWING UNITS Number of mowing units: 3 independent, hydraulically driven flail mowing units driven by axial piston motors, 3,500 rpm Mowing unit configuration: Fixed flail mowing unit with 12 flails Diameter 25 cm Equipped with a 3" support roller Mowing width: Variable 77 cm – 215 cm Height adjustment: 25 mm – 85 mm Weight transfer system: Electrically operated for improved traction through weight transfer from the mowing units to the wheels *Wiper with intermittent function *Radio pre-wiring *Variety of ventilation options *Standard with LED lighting and H7 headlights *Air conditioning *Tinted glass, sun visors and 3 mirrors *Two doors and hinged rear window Kit, reversible fan Reversing fan for optimal cleanliness of the ventilation grille in the hood Ljdpfx Akozdiu Esqshn Kit, deflectors Kit, complete lighting (required for STVZO) Kit, protective covers for cutting units (required when driving on roads) Bumper to protect the hood INCLUDING: Mulching blade for leaves and grass clippings Subject to changes, typing errors, mistakes and prior sale. All information is provided without guarantee. The sale is made excluding any guarantee or warranty.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, SUPER PRICE!!! NOW ONLY 6,000 EUR!!! Taylor Hobson Talyrond 265 roundness measuring instrument. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, and also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. It is certainly of interest to motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing its basic structure, except for the computer. A newer, more modern HP computer with a small form factor is included. Max. diameter: 350 mm Max. test piece height: 500 mm (higher is possible, measured in two sections, up to a maximum of 1000 mm) Self-centering of the workpiece: +/- 5 mm Max. weight of the test piece: 40 kg The system has been used very little and has only had two owners. The original owner, from whom I purchased it, was an implant company in Hamburg. It was used there in a "medically clean environment" and is extremely clean. It was never located in a dirty machine hall. The year of manufacture is estimated to be between 2003 and 2005. The Taylor Hobson measuring software is, of course, included and runs on the supplied HP computer (without a password). It is also on the USB stick, perhaps to be installed on another machine at your location. Accessories are included: the original Taylor Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase individually. A sample/pattern lens (hemisphere) for calibration is also included! The very detailed operating manual is on the USB stick, and all circuit diagrams and functional diagrams are also included! The system will be shipped on two Euro pallets via a freight forwarder. It is already securely fastened to them. The Talyrond 265 and the desk will be well-protected for transport with bubble wrap, etc., and wrapped with stretch film, and the system itself is secured with "transport safety screws." Lhodezcqy Eopfx Akqen Shipping will be at the buyer's expense and will be carried out on two Euro pallets. The measuring system should definitely be set up and put into operation by a Taylor Hobson service technician, who can then recalibrate the system on-site. This is now recommended after a few years. Errors can be made during setup and commissioning. For example, some locking screws are installed for transport, and if you forget to remove them, the system can be damaged when it starts up. A truly well-maintained, very accurate system that will continue to provide excellent service for many years to come!!

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 930135, color channels: 8 couleurs + blanc, year of last overhaul: 2026, Equipment: documentation/manual, We are selling an industrial printer in very good condition. The machine is covered by a service contract and is properly maintained. We primarily use this printer for printing banners, vinyl, paper, and, of course, all rigid materials such as Forex, Dibond, corrugated board, etc. Lodpfx Aoz R Tuyokqshn We can operate the printer in 4-color mode (fast mode) or using 8 colors for high-quality prints. The printer is located in Belgium and is available for a demonstration at any time.

Condition: like new (used), Year of construction: 2011, operating hours: 20,000 h, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,900 mm, Here, we offer the following well-maintained, used injection molding machine for sale as part of our injection molding machine trading business. We also purchase well-maintained injection molding machines, with a focus on models manufactured from 2010 onwards. Ledjz Spq Sopfx Akqjhn We have been a wholesaler of used injection molding machines and peripheral equipment for injection molding applications for over 27 years. Handling unit in top condition. Manufacturer: Geiger Type: Midliner 3.O V5.0 Year of manufacture: 2011 Operating hours: approx. 20,000 hours Dimensions: X-axis, ejector stroke: 300 mm Y-axis, vertical stroke: 1000 mm Z-axis, traverse stroke: 1900 mm Includes programming unit: HT320Z Tried-and-tested line-based programming PC interface via USB Program assistant - Available for immediate loading onto the buyer's truck from our warehouse in Hanover/Germany, or available for delivery to your location with shipping costs covered – worldwide delivery possible. - The machine was tested before dismantling. - The machine is our sole property. - The requested machine is available in our warehouse in Hanover and will be offered after a functional test and can be inspected while powered on. For information about the machines we offer and our company: - We only sell machines that we have purchased from ongoing production and that are stored in our warehouse in Hanover. - All machines offered are inspected and tested before dismantling. - We do NOT sell insolvency goods. We are NOT an intermediary that deals with third-party property. - All machines offered come from successful companies for whom maintenance and care are a matter of course. - All machines offered can be inspected at our warehouse.

Condition: used, Year of construction: 2022, operating hours: 6,731 h, functionality: fully functional, machine/vehicle number: 20804731, type of input current: three-phase, overall weight: 1,695 kg, input voltage: 400 V, total width: 3,405 mm, total length: 3,900 mm, total height: 1,310 mm, volume flow: 29,000 m³/h, space requirement height: 1,310 mm, space requirement width: 3,405 mm, space requirement length: 3,900 mm, filter area: 540 m², suction capacity: 29,000 m³/h, compressed air connection: 4 bar, power: 45 kW (61.18 HP), input frequency: 50 Hz, transport length: 3,900 mm, transport width: 3,405 mm, Plymovent MDB-36 PRO central extraction system for welding fume and dust extraction. Year of manufacture: 2022, used. For sale is a complete central extraction system consisting of a filter unit, fan, frequency converter, piping system, extraction arms, spark arrestors, shut-off dampers, sensors and other accessories. The system will be sold as a complete package according to the scope of the offer. Lhodpfx Aoztmw Tekqsn Technical data: - Manufacturer: Plymovent - Type: MDB-36 PRO - Year of manufacture: 2022 - Filter area: 540 m² - Extraction volume flow: approx. 29,000 m³/h - Fan power: 45 kW - Weight: approx. 1,695 kg - Dimensions: approx. 3,900 x 3,405 x 1,310 mm - Filter cartridges cleaned with compressed air - Frequency converter included Scope of supply: - MDB-36 PRO filter unit - 36 filter cartridges CART-PTFE/15 - 45 kW fan in soundproofing box - Frequency converter VFD-45 - Pressure sensor PT-2500 - 2 x SparkShield-500 spark arrestors - Piping system - 7 x KUA-160/4H extraction arms - ERC-5.8 extraction rail with support consoles - Automatic shut-off dampers - Switching devices and sensors - Exhaust/recirculation switchover - Louvre silencer - Other accessories according to the scope of the offer Inspection possible by appointment. The system is sold in its current condition. The system was used for the extraction of welding fumes and grinding dust and is sold as a complete unit. Collection of the system by the buyer is highly desirable. Sale in current condition. Note: The system is currently disassembled and not connected. Before being taken out of service, the system operated perfectly and without any known functional faults. An inspection is of course possible, but a demonstration under power cannot be carried out at present. The system was used for the extraction of welding fumes and grinding dust and is sold as a complete unit. Collection of the system by the buyer is highly desirable. The information on documentation and certification, operating hours and machine/vehicle number will be supplemented and provided later. If you have any questions or are interested, please send us a message. We will gladly provide further information and additional pictures upon request.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, total length: 7,000 mm, total height: 3,200 mm, total width: 4,000 mm, type of input current: three-phase, input voltage: 400 V, volume flow: 24,000 m³/h, suction capacity: 24,000 m³/h, extraction nozzle diameter: 500 mm, power: 4 kW (5.44 HP), Equipment: cabin, For sale is a like-new mobile spray booth, EuroSys PT-99999, from Neue Protechnik AG, Neuenhof CH. The system was only in operation for a few months and is in perfect condition. Lhedpfx Ajz Nxk Nekqen The system is fully equipped and includes the mobile EuroSys spray booth with PVC material, 2 entrance gates of 1500x2800mm each with integrated filter holders, intake air filter M5, LED ceiling lighting, and the paint mist extraction unit PT-999998 with a 4kW motor (400V), 24,000 m3/h capacity, a 3-stage filter system according to LRV guidelines, exhaust pipe D500mm, and a chassis/underframe. The original invoice for CHF 22,900 is available. The system has already been completely disassembled, carefully packed, and is stored ready for pickup. An inspection before pickup is, of course, possible at any time. We are available to answer any questions and arrange viewings: Available via WhatsApp Several videos are available (including the running motor, etc.) (30 photos, 2 videos) Google Drive

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, feed rate X-axis: 1 m/min, total height: 1,750 mm, total length: 1,400 mm, total width: 1,250 mm, quill diameter: 60 mm, space requirement width: 1,500 mm, space requirement length: 1,500 mm, space requirement height: 1,800 mm, distance table center to spindle nose: 590 mm, spindle stroke: 130 mm, workpiece weight (max.): 400 kg, Equipment: rotational speed infinitely variable, Please read the text carefully, thank you! HENRI HAUSER OP3 High-precision drilling machine / gauge drilling machine (Made in Bienne/Biel, Switzerland) with extensive accessories and tools worth over 9,500 EUR. Excellent condition! Please only contact us with serious inquiries if you are genuinely interested in purchasing. As long as the ad is online, the machine is still available. The machine can, of course, be inspected while powered on. It is to be sold only to a good and appreciative owner, no dealers. Coordinate drilling machine / gauge drilling machine with tool package (see photos) in very well-maintained, exceptional condition, second owner (41 years in current ownership). This quality will never be produced again! The coordinate drilling machine has the rare option of a motorized table drive / rapid traverse in the X and Y axes and potentiometers. The stepless feed in the X axis also enables light milling and surface milling. This eliminates the tedious manual cranking required by all other Hauser coordinate drilling machines. Furthermore, it has the rare thermal stabilization and expansion compensation. Two heaters are provided for this purpose, which must be switched on separately before starting work and to maintain high accuracy and dimensional accuracy. This explains the factory-high positioning accuracy of 0.002 mm with a resolution of 0.00. It should be noted that the machine has two Heidenhain digital displays with a total of 4 glass scales with 1My resolution, also for the quill feed. This is a great advantage when drilling and surfacing accurately in depth with Wohlhaupter, spindle tools, etc. With the options mentioned and in this first-class condition, it is very rare and most likely no longer available. Lhjdpozuvwlefx Akqen These machines are mainly used in the watch industry, gunsmithing, precision engineering, material testing and the optical industry, where the highest precision is required. Also ideally suited for engine construction / overhaul, special machine construction, etc. All documents, manuals, electrical wiring diagrams, etc. are available in the original! Technical data: Table length 550 mm, table width = 320 mm, longitudinal travel X-axis = 400 mm, transverse travel Y-axis = 250 mm, vertical travel Z-axis = 400 mm Max. workpiece weight on the table = 400 kg, spindle connection MK 2, stroke of the drilling spindle (Z-axis) = 130 mm Distance table to spindle = 590 mm, spindle speeds stepless from 60 rpm to 3000 rpm Feeds: Drilling spindle carriage: 2 stages from 0.03 mm/rev to 0.06 mm/rev Connection 50 Hz 3x 380 Volt, spindle motor 0.80 HP Machine dimensions: Length = 1400 mm, width = 1250 mm, height = 1750 mm, machine weight approx. 1500 kg. Payment for the machine is made, as is common with used machines, in net before loading, no partial or installment payments! I prefer the machine to be picked up by the buyer by means of a forwarding agent or their own truck. Loading onto a truck is free for the buyer. Shipping (direct transport without reloading) within the EU is still possible depending on the country. Price net export within EU.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, operating hours: 20 h, Well-maintained and fully functional wide belt sander, manufactured in 2020. Manufacturer: Holzkraft Model: LBSM 3005 ESE Ledpfxsz S Ufbo Akqshn Year: 2020 Working width: 300 cm. Electric height adjustment. The wide belt sander is in perfect condition, both visually and technically, and has been used very little. The machine can, of course, be inspected and thoroughly tested while powered on. The sale is to commercial businesses only and excludes any liability for material defects. No guarantee, warranty, or right of return.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, operating hours: 50 h, Fimal thickness planer manufactured in 2022, in like-new condition. The machine has only been used for a maximum of 50 hours. Therefore, it is in very good condition! Working width: 63 cm Electric table adjustment Lhjdpfx Aez S Ulzjkqjn Includes new Tersa replacement knives Optionally, a matching Fimal surface planer, model PF530N, manufactured in 2022, can also be purchased. See the last pictures. Optionally, a suitable dust extraction system can also be purchased. The machine can, of course, be inspected and thoroughly tested while powered on. The sale is to commercial businesses and excludes any warranty for defects. No guarantee, warranty, or return.

Condition: used, Year of construction: 1984, functionality: fully functional, power: 2 kW (2.72 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 340 mm, cutting width (max.): 450 mm, control type: manual, roller diameter: 500 mm, pivoting range: 45 °, actuation type: electric, total height: 1,950 mm, total width: 700 mm, year of last overhaul: 2026, Equipment: CE marking, For sale is a SAC BW 500 bandsaw manufactured in 1984. The machine is located at my premises, is fully functional, and can, of course, be inspected and tested before purchase. A recent DGUV-V3 inspection has been successfully completed. The machine has been inspected and is ready for operation. The bandsaw is secured to a pallet, making it easy to transport and allowing it to be conveniently loaded onto our forklift for pickup. Technical data: - Manufacturer: SAC - Model: BW 500 - Year of manufacture: 1984 - Motor power: 2 kW - Speed: 2,800 rpm - Electrical connection: 380 V / 50 Hz - Current consumption: 3/7 A - Saw blade width: 16 mm - Throat depth: 340 mm - Cutting width to the left of the fence: up to 440 mm - Cast iron wheels: 500 mm diameter - Wheel rubber coating: still in good condition Saw table and fence: - Solid cast iron table, swiveling by 45° - Table width: 700 mm - Table depth: 550 mm - Aluminum fence ruler: - Length: 670 mm - Height: 140 mm Machine dimensions: - Height: 1,950 mm - Width: 880 mm - Depth: 700 mm Condition and pickup: - Fully functional - Recent DGUV-V3 inspection - Can be inspected and tested on site while powered - Secured to a pallet - Loading with a forklift is possible The 500 mm cast iron wheels still have a good rubber coating on which the saw blade runs. The SAC BW 500 is a solid, classic bandsaw for woodworking and is suitable for workshops, carpentry shops, or ambitious woodworking projects. Lsdpfx Akez S H Stsqohn Inspection and functional testing are possible by appointment. Pickup on site. The machine can be loaded onto a suitable transport vehicle using a forklift. If you have any questions, please do not hesitate to contact me.