Used Golf Course for sale (903)

Condition: used, Rotating Boring Table Travel X: 2000 mm Table size: Length 1240 mm x Width 1250 mm Bench width: 1030 mm Crjdszwuu Ispfx Afxeg Diameter of the ball screw: Ø 70 mm 2 motors INDRAMAT: 1 travel X motor + 1 table rotation motor Supplied without electrical panel (electrical cabinet to be redone) Protector hennig in average condition Ideal part for retrofitting Total bench length: 5200 mm Width: 1900 mm Height: 900 mm Weight: approx 7 T

Condition: used, functionality: fully functional, Year of construction: 1996, operating hours: 15,675 h, load capacity: 6,000 kg, lifting height: 3,150 mm, fuel type: diesel, mast type: telescopic, construction height: 2,750 mm, fork length: 1,200 mm, empty load weight: 9,507 kg, drive type: Diesel, Diesel forklift Load center: 600 ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Telescopic Cjdpfx Afjzywniexjrg Transmission: Electromechanical Condition: Ready for use and fully functional Technical condition: normal Front tire type: Pneumatic Front tire size: 355/65-15 Rear tire type: Pneumatic Rear tire size: 315/70-15 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment is workshop-tested and complies with FEM4.004. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. Of course, we also buy your used equipment, even if you do not purchase a vehicle from us. Lease purchase and financing at favorable terms are available upon request. We will be happy to provide you with competent and detailed advice on our vehicles. 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, interior mirror, exterior mirror, windshield wiper, single pedal, seat.

Year of construction: 2022, operating hours: 4,320 h, condition: used, functionality: fully functional, machine/vehicle number: 3175555, This is a hood-type commercial dishwasher manufactured by Winterhalter, model PT-L Energy Plus. The machine is offered with an infeed and outfeed table and can be positioned either straight or in a corner. In our in-house workshop, the machine has undergone a thorough inspection and is, of course, fully functional. Crjdpfx Aszyaq Tjfxjg It was manufactured in 2022 and first put into operation in 04/2024 (see photo sequence). The hood-type dishwasher has completed only 6,401 wash cycles and operated for 4,320 hours. You will receive an invoice with VAT shown. Technical data: W x D x H: approx. 635 x 750 x 2175 mm (with hood open: 610 x 750 x 2175 mm) Power connection: V: 400 / kW: 13.2 / Hz: 50 Boiler heating: 10.8 kW Tank heating: 2.5 kW Tank capacity: 35 l Tank temperature: +45°C to +69°C Final rinse temperature: +50°C to +86°C Water inlet: 371" M Weight: 163 kg Serial number: 3175555 Year of manufacture: 2022 Condition: Used, inspected, fully functional Winterhalter PT series: High-quality and user-friendly control system: Color touchscreen One-button operation with self-explanatory icons Elliptical wash fields: High-quality wash fields at the top and bottom cannot become clogged Caustic filter: With turbidity sensor: filters all dirt particles no need to change the wash water during the workday Automatic regeneration Wash water is always clean EnergyPlus: In the PT series, the EnergyPlus exhaust air heat recovery system is available as an option but is already integrated in this machine. In contrast to the standard EnergyLight waste water heat recovery system, EnergyPlus uses an additional exhaust air heat exchanger in addition to a more powerful waste water heat exchanger. It utilizes the energy of the warm water vapor inside the machine to preheat the cold incoming water. When the machine is opened, hardly any warm, humid water vapor escapes into the room. And up to 15% of energy costs are saved per wash cycle. The grease filter can be easily and quickly removed for cleaning. Integrated waste water heat recovery Automatically heats the wash water to +30°C before the program starts shortens the heating time and saves electricity Integrated exhaust air heat exchanger: cold incoming water is heated by the warm water vapor in the machine Up to 15% energy cost savings per wash cycle Further information: Rack capacity: 44 per hour Rack size: 500 x 500 mm / 600 x 500 mm Outer material: Stainless steel Inner material: Stainless steel Loading height: 440 mm Easy to use: Hood opens easily Energy-saving: Hood is double-walled Interior is deep-drawn 3 standard programs 7 special programs: ECO program / Short program (rack capacity increases to 72 racks/hour) Whisper program Intensive program Self-cleaning program Descaling program Water consumption / wash cycle: approx. 2.4 liters Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like a consultation, or would you like to see something on-site? You can reach us by phone during our opening hours: Monday - Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: used, Year of construction: 2001, functionality: fully functional, Equipment: documentation/manual, Complete perfect binding line consisting of: - Gathering machine Wohlenberg model Sprinter 7010 – 2001 – 16 stations + manual feed - Flap folding machine Wohlenberg KRF – 2009 Crsdpoy Shhtefx Afxjg - Perfect binder Wohlenberg model GOLF 6001 – 15 clamps – Hotmelt – Gauze

Year of construction: 2004, condition: good (used), Golf car, CLUBCAR PRECEDENT, 2-seater, Golf cart, 2006, with charger. A video can be sent via WhatsApp. Cedpfx Aoy Dfy Dsfxsrg We have a continuous stock; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without guarantees (see our general terms and conditions). You can make an appointment without obligation for a viewing and/or test drive. Please call beforehand, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Year of construction: 2022, operating hours: 6,731 h, functionality: fully functional, machine/vehicle number: 20804731, type of input current: three-phase, overall weight: 1,695 kg, input voltage: 400 V, total width: 3,405 mm, total length: 3,900 mm, total height: 1,310 mm, volume flow: 29,000 m³/h, space requirement height: 1,310 mm, space requirement width: 3,405 mm, space requirement length: 3,900 mm, filter area: 540 m², suction capacity: 29,000 m³/h, compressed air connection: 4 bar, power: 45 kW (61.18 HP), input frequency: 50 Hz, transport length: 3,900 mm, transport width: 3,405 mm, Plymovent MDB-36 PRO central extraction system for welding fume and dust extraction. Year of manufacture: 2022, used. For sale is a complete central extraction system consisting of a filter unit, fan, frequency converter, piping system, extraction arms, spark arrestors, shut-off dampers, sensors and other accessories. The system will be sold as a complete package according to the scope of the offer. Technical data: - Manufacturer: Plymovent - Type: MDB-36 PRO - Year of manufacture: 2022 - Filter area: 540 m² - Extraction volume flow: approx. 29,000 m³/h - Fan power: 45 kW - Weight: approx. 1,695 kg - Dimensions: approx. 3,900 x 3,405 x 1,310 mm - Filter cartridges cleaned with compressed air - Frequency converter included Scope of supply: Cjdpfx Aeztmw Tofxsrg - MDB-36 PRO filter unit - 36 filter cartridges CART-PTFE/15 - 45 kW fan in soundproofing box - Frequency converter VFD-45 - Pressure sensor PT-2500 - 2 x SparkShield-500 spark arrestors - Piping system - 7 x KUA-160/4H extraction arms - ERC-5.8 extraction rail with support consoles - Automatic shut-off dampers - Switching devices and sensors - Exhaust/recirculation switchover - Louvre silencer - Other accessories according to the scope of the offer Inspection possible by appointment. The system is sold in its current condition. The system was used for the extraction of welding fumes and grinding dust and is sold as a complete unit. Collection of the system by the buyer is highly desirable. Sale in current condition. Note: The system is currently disassembled and not connected. Before being taken out of service, the system operated perfectly and without any known functional faults. An inspection is of course possible, but a demonstration under power cannot be carried out at present. The system was used for the extraction of welding fumes and grinding dust and is sold as a complete unit. Collection of the system by the buyer is highly desirable. The information on documentation and certification, operating hours and machine/vehicle number will be supplemented and provided later. If you have any questions or are interested, please send us a message. We will gladly provide further information and additional pictures upon request.

Condition: like new (used), Year of construction: 2022, operating hours: 7 h, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 3 W, type of cooling: air, total width: 300 mm, total height: 125 mm, total length: 330 mm, working range: 300 mm, overall weight: 44 kg, scan area length: 330 mm, scan area width: 330 mm, travel distance X-axis: 330 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 42 mm, input current: 4 A, laser wavelength: 355 nm, path measurement accuracy: 5 mm, ambient temperature (max.): 40 °C, input frequency: 50 Hz, Equipment: documentation/manual, KEYENCE MD-U1020C – 3-Axis UV Laser Marker (wide marking area) 3 identical units available. Built July 2022, delivered new in 2023, only 7 operating hours each. Practically as new, tested and fully functional. DELIVERY AND ON-SITE FUNCTION TEST – INCLUDED IN THE PRICE We deliver personally to your address anywhere in the EU/EEA, by van. No pallet, no freight terminals, no forwarder handling of the sensitive optics – direct door to door. On arrival the system is connected, powered up and a test marking is produced in your presence before handover. You take delivery of a machine you have seen running at your own site, not a crate on a pallet. Scope of the on-site test: connection, power-up and test marking with the supplied system. Integration into an existing production line, fixtures, tooling and application programming are not included, but can be quoted separately. Collection ex works in Örebro, Sweden is of course also possible. SCOPE OF SUPPLY (per unit) - MD-U1020C marking head, 355 nm UV, 18.0 kg, IP64 - MC-P1 controller unit, 23.5 kg - Operating console, 2.0 kg - Connecting cables, 4.3 m TECHNICAL DATA - Laser medium: YVO4, wavelength 355 nm (UV), laser class 4 - Laser power: 3 W at 40 kHz (2.5 W at the focal point) - Marking area: 330 x 330 x 42 mm (true 3-axis control, wide-area type) - Standard working distance: 300 mm - Marking resolution: 5 µm - Max. scanning speed: 8,000 mm/s - Digital galvo scanner with linear motor drive, built-in power meter - Interfaces: RS-232C, USB 2.0, Ethernet (10BASE-T / 100BASE-TX) - Power supply: 100–240 V AC ±10 %, 50/60 Hz, max. 800 VA (approx. 250 W average) - Cooling: forced air – no external chiller required - Ambient temperature: 0 to +40 °C - Weights: head 18.0 kg / controller 23.5 kg / console 2.0 kg Credpfx Aezw U T Rofxog APPLICATION The 355 nm UV wavelength marks heat-sensitive materials without thermal damage ("cold marking"): plastics and resins, glass, ceramics, films, PCBs, medical devices, connectors and nameplates. High-contrast, permanent, legible codes and logos with minimal material stress. COMMERCIAL Price is per unit, net, delivered. Units can be sold individually or as a package of three. Inspection and test marking under power is also possible by appointment at our location in Örebro, Sweden before purchase. Please contact us for photos, serial numbers and further details.

Condition: used, Year of construction: 1999, machine/vehicle number: 80858, functionality: fully functional, power: 15 kW (20.39 HP), pressing force: 150 t, stroke length: 200 mm, throat depth: 250 mm, total length: 4,400 mm, total width: 1,700 mm, total height: 2,500 mm, overall weight: 10,400 kg, Equipment: CE marking, HACO ERM 40150 (80858) Crodpfxjzxgxuo Afxjg Technical condition: Used Bending length: 4100 mm Tonnage: 150T Type of press brake: Synchronized Back gauge: Y1 + Y2 + X-R, CNC controlled Back gauge length: 800 mm Crowning: Yes (CNC controlled) Daylight opening: 400 mm Stroke: 200 mm Control system: BC 45 Robosoft graphical control Motor power: 15.0 kW, 400V Tooling: Yes, 1 set of bending tools Tooling standard: European standard Total length: 4400 mm Total depth: 1700 mm Total height: 2500 mm Weight: 10,400 kg Serial number: 80858 Year of manufacture: 1999 Delivery and installation at your location are, of course, possible; delivery costs and any additional costs will be discussed separately. Since 2019, we have been the Dutch dealer for HACO press brakes and shears. In addition to selling sheet metal processing machines, we offer a complete package for service, maintenance, and repairs.

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, feed rate X-axis: 1 m/min, total height: 1,750 mm, total length: 1,400 mm, total width: 1,250 mm, quill diameter: 60 mm, space requirement width: 1,500 mm, space requirement length: 1,500 mm, space requirement height: 1,800 mm, distance table center to spindle nose: 590 mm, spindle stroke: 130 mm, workpiece weight (max.): 400 kg, Equipment: rotational speed infinitely variable, Important note! Payment for the machine, as is customary with used machines, is made in full before loading, no partial payments or installments! HENRI HAUSER OP3 High-precision drilling machine / Made in Bienne/Biel, Switzerland Excellent condition! Coordinate drilling machine / jig boring machine with tool package (see photos) in very well-maintained, exceptional condition, second owner (41 years in current ownership). This quality will never be produced again! Crsdezuvwljpfx Afxeg The coordinate drilling machine has the rare option of motorized table drive in the X and Y axes and potentiometers. This eliminates the need for tedious manual adjustment of the individual coordinates over long distances using hand cranks. Furthermore, it has rare thermal stabilization and expansion compensation. Two heaters are provided for this purpose, which can and must be switched on separately before starting work to maintain high accuracy and dimensions. This explains the factory-high positioning accuracy of 0.002 mm with a resolution of 0.00. It should be noted that the machine has two Heidenhain digital displays with a total of 4 glass scales with 1My resolution, also for the quill feed. This is a major advantage for precise drilling and facing at depth with Wohlhaupter, spindle tools, etc. With the options mentioned and in this first-class condition, it is very rare and highly unlikely to be available again. These machines are primarily used in the watch industry, gunsmithing / defense industry, precision engineering, material testing and the optical industry, where the highest precision is required. Also ideally suited for engine construction/overhaul, special machine construction, etc. All documents, manuals, electrical wiring diagrams, etc. are, of course, available in their original form! Technical data: Table length 550 mm, table width = 320 mm, longitudinal travel X-axis = 400 mm, transverse travel Y-axis = 250 mm, Vertical travel Z-axis = 400 mm Max. workpiece weight on the table = 400 kg, spindle mounting MK 2, stroke of the drilling spindle (Z-axis) = 130 mm Distance table to spindle = 590 mm, spindle speeds continuously variable from 60 rpm to 3000 rpm Feeds: Drilling spindle slide: 2 stages from 0.03 mm/rev to 0.06 mm/rev Connection 50 Hz 3x 380 Volt, spindle motor 0.80 HP Machine dimensions: Length = 1400 mm, Width = 1250 mm, Height = 1750 mm Machine weight approx. 1500 kg. Shipping (direct transport without reloading) within the EU is possible. Price net for export within the EU. Example: Secure shipping by direct transport (without reloading!) to France/Spain/Italy, etc. up to 1700 km distance approx. EUR 1100 - 1450.

Year of construction: 2015, condition: good (used), functionality: fully functional, For sale is a HAIMER Power Clamp 2006 Economic NG including a HAIMER tool cooling unit. This system is ideally suited for shrinking and then rapidly cooling tool holders. Technical data: * Manufacturer: HAIMER * Type: Power Clamp 2006 Economic NG * Year of manufacture: 2015 * Serial number: 7105551 * Includes HAIMER AirCool tool cooling unit * 400-volt connection * Adapters SK40, SK50, HSK 63 Condition: Credpfx Aszwptfefxsg The system is in good, used condition. Inspection and functional testing are possible by appointment. Shipping is possible. Please contact us if you have any questions or would like to see a functional video. Note: The sale is made by a commercial seller. The stated price includes the statutory value-added tax. You will, of course, receive an invoice with the VAT shown. Subject to change, prior sale, and errors.

Condition: used, functionality: fully functional, Year of construction: 1994, operating hours: 1 h, load capacity: 1,250 kg, lifting height: 4,250 mm, free lift: 1,400 mm, fuel type: electric, mast type: triplex, construction height: 1,940 mm, fork length: 1,150 mm, drive type: Elektro, Reach truck Load center: 600 Mast type: Triplex Transmission: Electromechanical Condition: Ready for use and fully functional Technical condition: very good Front tire type: Vulkollan Rear tire type: Vulkollan Crodpfszywncox Afxog Battery voltage: 24V Battery capacity: 375Ah Battery manufacturer: Deta Battery type: PzS Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment is workshop and FEM4.004 certified. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. Of course, we also purchase your used equipment, even if you do not buy a vehicle from us. Lease-purchase and financing options are available on request at favorable terms. We will gladly provide you with competent and detailed advice on our vehicles. Impulse control, full free lift, non-marking tires.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, power: 9 kW (12.24 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 23 m/min, total height: 1,500 mm, total length: 3,200 mm, total width: 1,200 mm, overall weight: 1,200 kg, We offer this edge banding machine for shaped components, VITAP ECLIPSE 2.0, in very good condition, manufactured in 2021. Rated voltage: 400 V Frequency: 50 Hz Rated power: 9 kW Air pressure: 6 bar Weight: 1200 kg Dimensions (L × W × H): 3200 × 1200 × 1500 mm Thickness of workpieces: 8–60 mm Feed rate: 9–23 m/min Glue tank capacity: 9 kg Edge banding machine VITAP ECLIPSE 2.0 Device type: FD 21 pro Device number: 120019 P Year of manufacture: 2021 Used device, in very good technical condition, used for one project, used sporadically for over a year, hence the decision to sell. We are interested in selling or exchanging it for a panel saw with a cutting width of 4300 mm (with a price adjustment, of course). Due to the project closure, we are offering for sale: Multi-spindle drilling machine FELDER FD 21 Panel saw HOLZMA OPTIMAT HPP 350 Edge banding machine VITAP ECLIPSE 2.0 The device is connected, fully functional, and can be viewed/tested on-site – Kraków, Rybitwy. The device is designed for edge banding narrow side surfaces of furniture components made of particleboard, plywood, and lumber. The VITAP edge banding machine is ideally suited for edge banding from 1-3 mm. Type: Edge banding - Single-sided edge banding machine Cedpszuwdgofx Afxorg Component thickness: 3 mm Edge thickness: 60 mm If you have any questions or need additional information, please send a message or contact us by phone.

Condition: reconditioned (used), Year of construction: 1998, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 067-1045 from 1998 first owner, color channels: 2 kleuren rechtdoor, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 100 mm, paper height (max.): 365 mm, total length: 2,765 mm, total width: 1,523 mm, total height: 1,560 mm, space requirement length: 2,765 mm, space requirement width: 1,523 mm, space requirement height: 1,560 mm, type of input current: three-phase, input current: 20 A, input voltage: 200 V, Equipment: documentation/manual, In contrast to the previous offer, the machine has been thoroughly cleaned and inspected. Several replacements and repairs have been carried out, including new timing chains, a new drive chain for the feeder, replacement of some idler rollers, and all grippers on all drums have been made of stainless steel and are now functioning smoothly, ensuring excellent register. The rollers are rated approximately 7 out of 10; they are slightly glazed and close to their minimum dimensions, but a period of approximately 1500 to 2500 hours should still be manageable without any significant issues, which is what has been promised! 2-color offset press with high-quality construction, featuring hardened and ground gears, cylinders running in class P5 preloaded tapered roller bearings (sets of 2), and lubricated via oil bath and pressure lubrication. B3 format (35x50 cm) in a conventional standard configuration (no autoplate or cocking), but with an alcohol dampening system with large rollers based on the SM52 design, producing excellent print quality. From the original owner who did not maintain the machine properly (cosmetically); however, a comprehensive maintenance history is available, performed by the importer. The latest meter reading in the history is 11.6 million impressions from 2003. Due to illness and outsourcing, the previous owner, a printing broker, has hardly used the machine since then. NEXT STEPS: We will check the machine against the current meter reading and ensure correct and reliable operation. C)2 dry ice cleaning is being considered, as is a complete overhaul of the machine, as the mechanical condition is exceptionally good. However, this would increase the cost, so the machine is currently offered in its current condition, "as is", EXW our warehouse in Son, NL (5,500,- EXW, NOW after refurbishment €7,500,- EXW van Rooij). Any type of inspection is, of course, permitted. We guarantee that the machine is free from cracks, cylinder damage and/or repairs, and that the gears are free from damage. The rubber rollers are glazed and need to be replaced. The Royce ECO circulating pump and cooling system for the dampening unit shows signs of corrosion. Some specifications, for all specifications, open the PDF at the bottom of this page. Maximum printing speed 12,000 sheets per hour Maximum paper size 365 x 520 mm Minimum paper size 100 x 148 mm or 148 x 100 mm Maximum printing area 350 x 510 mm Rubber blanket size 500 x 520 x 1.9 mm Plate size 400 - 410 x 510 mm Dampening roller in this case for film dampening is 1 (62mm) Number of ink rollers 4 pieces of 46, 48, 52 and 54 mm Feeder stack height maximum 850 mm Delivery stack height max 360 mm Electrical connection 3 phases 200 VAC 50HZ (primary), but there is a transformer for conversion from 3 x 415/400/380/230 VAC to 200VAC Total power consumption 7kW Primary fuse rating at least 20A Dimensions LxWxH = 2765 x 1523 x 1560 mm Codjv Nv Tajpfx Afxorg Net weight 4000 kg

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: 2331 280, We sell a used Bolte Pro I-2200 stud welding unit with microprocessor control. MFG 2023, serial number: 2331 280 The trolley version of the PRO-I 2200, with two large, extremely robust wheels and a telescopic handle, is ideal for mobile use on construction sites. Technical features and advantages: Excellent welding quality – modern inverter technology ensures very precise control and high reproducibility of the welding process Very high arc stability – also in cases of short welding times and low welding currents Powerful – high welding current of 1050 A for a maximum welding diameter of 13 mm Fast welding sequences through innovative cooling concept Ideal for mobile use – considerably less weight than conventional stud welding units Robust construction for use in harsh environments Low energy consumption due to high efficiency Easy operation via a very robust rotary pressure switch Microprocessor control All functions and parameters are displayed on a large display (display contrast is adjustable) Welding program library Welding program storage – 59 Welding range: Ø 2-22 mm Welding current: 100-2100 A Welding method: studs with ceramic rings or shielding gas and short-cycle stud welding with or without shielding gas Welded materials: steel, stainless steel, aluminum Voltage: 320-495 V, 32 A, 50/60 Hz Power source: transformer/rectifier Welding time: 1-1500 ms, continuously adjustable Codpoy Tqwyjfx Afxsrg Protection class: IP23 Dimensions (W x H x L) (mm): 550x850x650 mm Weight: 81 kg drawn arc stud welding gun GD 22 WMS is designed for welding shear connectors with large diameters (19 and 22 mm). Welding range Ø 3-22 mm Welding material steel, stainless steel Stud length 10-525 mm Welding method (acc. to DIN EN ISO 14555) stud welding with ceramic ferrule, stud welding with shielding gas Lift 0-6 mm, adjustable (raster: 0,3 mm) Welding cable: 2 m, 95 mm², outside Control cable plug: 12-pin Dimensions (WxHxL): 68x180x295 mm Weight (without cable): 2,45 kg The new drawn arc stud welding gun GD 22 is designed for welding shear connectors with large diameters (19 and 22 mm). The ample-dimensioned adjustable lift (adjustment range: 0-6 mm) ensures in combination with the adjustable hydraulic piston damper optimum welding results in this diameter field. Of course, the new guns are suitable for welding through metal deck. The gun also features a piston with linear ball track, an automatic length compensation system for different stud lengths and surface conditions as well as a robust, impact resistant housing for the hard work on the construction site. The high-grade outside welding cable (cable cross section 95 mm²) accommodates the high welding currents that are necessary for large stud diameters. Optionally, the new guns can be equipped with integrated travel measuring system. Using this the lift adjustment couldn`t be easier. Moreover, it enables a quality monitoring by measuring and recording of stud protrusion before the weld as well as stud travel (lift, immersion depth, immersion speed and short-circuit time) during the weld. Price 8.600 Euro + VAT, negotiable, FCA Oradea, Romania Please make an offer. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 9,613 h, load capacity: 3,000 kg, lifting height: 3,700 mm, fuel type: diesel, mast type: telescopic, construction height: 2,700 mm, fork length: 1,200 mm, empty load weight: 4,930 kg, drive type: Diesel, Rough terrain forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Telescopic Transmission: Torque converter Condition: Ready for use and fully functional Technical condition: good Front tire type: Pneumatic Front tire size: 400x70-20 Rear tire type: Pneumatic Rear tire size: 10x17.5 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment has been inspected by our workshop and is FEM4.004 certified. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. Of course, we also buy your used equipment, even if you do not purchase a vehicle from us. Lease-to-own and financing options are available on request at favorable terms. We will be happy to provide you with competent and detailed advice on our vehicles. Side shifter, Credjzxi Ryspfx Afxeg 3rd valve, rear work light, front work light, heater, full cabin, interior mirror, exterior mirror, windshield wiper, single pedal, seat.

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand “HP DesignJet T2600dr” production system Item for sale: 1 x HP DesignJet T2600dr We are happy to configure the machine to your requirements. Please feel free to contact us! Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order. A test print can be seen in the photo Csdpfezxzczjx Afxerg Packaging and dispatch: You are welcome to view the device during our business hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, Year of construction: 2023, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: L0098, table height: 1,000 mm, table width: 195 mm, total width: 1,500 mm, total length: 3,500 mm, total height: 2,150 mm, spindle speed (min.): 750 rpm, table length: 3,250 mm, spindle speed (max.): 6,000 rpm, number of spindles: 8, rotational speed (min.): 750 rpm, rotational speed (max.): 6,000 rpm, drill chuck size: 11 mm, workpiece weight (max.): 1,200 kg, operating pressure: 8 bar, air demand: 15 m³/h, KS Maschinenbau - KS LBM DB 04 DR Csdpeywtxbjfx Afxerg For sale is a row drilling machine, also known as a strip drilling machine. The row drilling machine KS LBM DB 04 DR is designed for drilling strips and guide rails made of aluminum, plastic, and wood, as well as roller shutter end strips (for wood profiles up to 3 meters long and up to 90 mm in height). The machine is equipped with 4 pairs of three-phase drilling units. Four holes each can be drilled simultaneously or with a time delay from above and below. The spacing between the drilling units is manually adjusted using an indexing system for various distances. The index holes are fitted with drill bushings into which the hardened index pins are centered. The offered strip drilling machine comes with 8 drill heads (4 oriented downwards, 4 upwards). We have used this machine in our workshop to drill wooden fence profiles. It has provided us with reliable service over the past few years. As our customer is switching to plastic profiles, we no longer have use for it. This machine configuration includes 8 extraction adapters for chip extraction, along with hoses and a manifold for customer-side extraction. Further videos and technical data about this machine series can be found at the following link: ksschulten.com/en/products/drilling-machines/strip-drilling-mach ine-ks-lbm/video.html The machine's operating manual is of course still available.

Condition: like new (used), Year of construction: 2010, operating hours: 65,850 h, functionality: fully functional, machine/vehicle number: 61013689, clamping force: 2,500 kN, screw diameter: 50 mm, clearance between the columns: 630 mm, displacement volume: 432 cm³, injection pressure: 2,304 bar, injection weight: 393 g, Equipment: documentation/manual, As a dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine We also, of course, purchase well-maintained injection moulding machines manufactured from 2010 onwards We have been wholesalers of used injection moulding machines for over 25 years In light of recent developments – tax information and benefits for used machinery From 1 July 2025, used machinery will also be eligible for a special annual depreciation allowance of 30% for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine Keyword: Growth booster (Section 7(2) EStG-E) Currently in stock and tested at our Hanover warehouse Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control unit: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed material: PE and PP – thermoplastics Extras - 2 x core pull (movable WAP, fixed WAP) - Pneumatic valve 1 on FWAP - Pressure accumulator for increased injection capacity - Fast SK removal CX Midrange - Ejection of cooled nozzle plug - Start handling during mould movement - Start-up sequence - Cycle time analysis - External USB keyboard - Graphical analysis – maintenance instructions - Electronic coding of injection unit - Pneumatic valve on BWAP blow-out - 12 temperature control points - Potential-free contact BDE - Process monitoring - Cycle storage - Trend graph - Target/Actual graph - PV control - Active back pressure control - From first owner - Origin: Germany Regular maintenance carried out by the manufacturer and previous owner Clamping unit Clamping force: 2500 kN / 250 tonnes. Column spacing: 630 x 630 mm Platen dimensions: 995 x 1050 mm Opening width: 820 mm Mould height: 330 mm min. Opening width max. 1150 mm Ejector stroke: 200 mm Ejector force: 57 kN max/26.3 kg Injection unit Screw diameter: 50 mm Injection volume: 432 cc Shot weight: 393 g/PS Injection pressure: 2304 bar Electrical Pump: 45 kW Heating: 5 zones, 18.7 kW Weight: 13,900 kg. Dimensions: 5.7 x 2.3 x 2.3 m. Complete documentation, manual and software Available immediately from our warehouse in Hanover, Germany, or free delivery subject to reimbursement of freight costs The machine is offered with a functional test certificate The machine is our sole property Cjdpfxoxqhuue Afxerg The machine in question is available immediately from our warehouse in Hanover, is offered in a functionally tested condition and can be viewed whilst powered up. Information about the machines we offer and our company - We only sell machines purchased from current production from our warehouse in Hanover - All machines on offer are inspected and tested prior to dismantling - We do NOT sell goods from insolvency estates - We are NOT a broker dealing in third-party property. - All machines on offer come from successful companies for whom maintenance and upkeep are a matter of course - All machines on offer can be viewed at our warehouse

Condition: used, machine/vehicle number: 26694, Year of construction: 2007, operating hours: 10,077 h, load capacity: 3,500 kg, lifting height: 3,900 mm, fuel type: diesel, mast type: simplex, construction height: 3,900 mm, Equipment: cabin, sideshift, .: 26694 Device details: Year of manufacture: 2007 Load capacity: 3500 kg Lifting height: 3900 mm Recorded operating hours: 10077 h Mast type: Standard Mast height: 3900 mm Length/width/height: 2750 / 1250 / 2220 mm Operating weight: 4725 kg ---- Equipment: Credpfx Afezmdnvexog * Canopy * 3rd valve * 4th valve * Full cabin * Particle filter * Heater * Front work light * Rear work light ----- Attachments: * Side shifter * Fork positioner * Telescopic forks ---- Additional device information: Fork length 1360 - 2360mm Inner fork spread range 200mm-1090mm---- The operating hours are generally recorded hours. We would be happy to offer you suitable transport. We have another 250 - 300 forklifts, attachments, and sweepers available for you immediately. Of course, also for rent! We would be happy to buy your OLD one. Do you have any questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak English. Subject to prior sale and errors in this offer. In retail, the device is sold in its AS-IS condition, without refurbishment. All information is without guarantee, errors and changes reserved.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Weiler Primus LZ G GS Lead and Draw Spindle Lathe, 3-axis, Heidenhain, Accessories, Very good condition!!! Technical data: >> Year of manufacture 1990, Machine no. 4718 >> Center height 120 mm >> Center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle bore 23 mm >> Short taper spindle head DIN 4 Crsdpfszg U Efjx Afxog >> Tailstock MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Brake motor >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 three-jaw chuck, 125 mm, with 4 sets of jaws >> 1 four-jaw chuck, 125 mm, with 2 sets of jaws >> Collet chuck system, collets from 1-20 mm, in 0.5 mm increments >> Spindle stop for collets >> Mulifix size A with 3 steel holders >> 3 drill chucks >> Coolant system About the machine: Offered for sale is a Weiler Primus GS lead and draw spindle lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that are almost as smooth as ground surfaces. Take the opportunity to inspect this machine on site while it is powered up and to convince yourself of its condition.

Condition: used, Year of construction: 2015, operating hours: 217 h, functionality: fully functional, axle configuration: 1 axle, suspension: steel, Equipment: ABS, trailer coupling, This trailer sweeper from the renowned AEBI Schmidt company, model TSS 112, is primarily used for snow removal and also for spreading salt on surfaces, and can also be used as a standard sweeper. In short, it has 2 main applications in winter: Snow removal + salt spreading In summer, it functions as a sweeper + water sprayer. The sweeper has had only one owner, who used it sporadically, as evidenced by the low number of operating hours (203 hours). The snow removal unit is fully functional, regularly serviced, and lightly used, mainly in winter for snow removal and salt spreading. The brushes are practically like new! Equipment for spreading wet salt or water: Tank volume: 2,500 L Distribution systems: Spray nozzles Spray width: 2.2 - 3.6 - 5.0 m Mounting/storage system: Trailer Speed control system: Increases work speed to 40 kilometers per hour Crodezyk Nmepfx Afxsg Ballast weights Own weight: approx. 2,135 kg Sweeping unit Brush width: 1,800 mm Sweeping width: 1,620 mm Note: The stated price is net and applies to export sales and for businesses. A significant discount is possible for individual customers. We invite you to contact us directly by phone to get your best price. — After price negotiations, we are able to provide detailed information and, for a serious buyer, record a video or perform a computer test or paint thickness measurement, so that you can confidently purchase the equipment remotely. — Of course, we strongly encourage you to come and inspect the equipment in person, but if that is not possible, this form of purchase will be available, guaranteeing a secure transaction.

Condition: used, mileage: 110,000 km, power: 81 kW (110.13 HP), first registration: 07/2022, fuel type: diesel, overall weight: 3,000 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 8, total length: 5,080 mm, total width: 1,956 mm, total height: 1,935 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, For sale is a well-maintained Renault Trafic Life with the globally popular 2.0-liter diesel engine. * The vehicle is in good condition! * German vehicle * Euro 6d standard * First owner * Maintained according to service schedule * M1 passenger car registration Equipment: Life version * 8 seats (2+3+3) * Air conditioning front + rear * Cruise control * LED headlights * Rear parking sensors * Style package * Heated exterior mirrors * Electric exterior mirrors * Electric windows * Central locking * and more... Technical data: Permissible total weight: 3000KG * Unladen weight: approx. 2100 KG Cjdjzyzpkspfx Afxerg * Payload: 900 KG * Trailer load: 2000 KG Why are we the right choice? Attractive financing through our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair conditions * Transfer registration (5-day / customs registration) usually on the same day * Airport or train station pick-up service All vehicles are professionally detailed and hygienically cleaned! Special features: Disinfection of the interior and ventilation system using ozone cleaning. 2-stage polishing on the exterior. * If necessary, paint correction and smart repair. All our vehicles have also undergone thorough maintenance. Of course, this includes new fluids, filters and other expenses that you don't need to worry about. Optionally, we can have the vehicle inspected at an independent testing center or workshop of your choice. We hope to have sparked your interest and are available to you around the clock. If you have any questions, comments or special requests, please do not hesitate to contact us! More information and insights into our business philosophy can be found on [website address]. Special equipment: Armrests for rear seat(s), rear parking aid, window in the cargo/passenger compartment: - sliding, left, rear hinged doors with glazing (opening angle 180 degrees), clear view package, spare wheel in driving condition, sliding door cargo/passenger compartment right with sliding window, style package, radiator grille with chrome trim, exterior mirrors in vehicle color, bumpers in vehicle color, rear window tinted, auxiliary heating Additional equipment: Airbag passenger side, airbag driver side, traction control system (ASR), audio system: Radio CONNECT R&GO, exterior mirrors electrically adjustable and heated, exterior mirrors in vehicle color, battery 85 Ah, floor covering: rubber in the driver's cab, floor covering: rubber in the cargo/passenger compartment, on-board computer, tachometer, automatic activation of headlights, electronic brake force distribution, luggage compartment cover / roller blind, illuminated glove compartment, glove compartment with cooling function, heated rear window, rear window wiper, interior trim: air vents chrome-look, interior filter: pollen filter, body/structure: standard combination, instrument cluster digital, fuel tank: 80 liters, steering column (steering wheel) adjustable, model update (2), engine 2.0 liter - 81 kW BLUE dCi diesel FAP CAT, rear fog light, wheelbase 3098 mm, low emissions according to Euro 6d exhaust standard, seat cover / upholstery: fabric, seat cover / upholstery: fabric Java, seats in the driver's cab: passenger seat comfort, 3-way adjustable, seats in the driver's cab: driver's seat comfort, 3-way adjustable, seats in the driver's cab: lumbar support passenger seat, seats in the cargo/passenger compartment: 2nd row, 3-seater bench, seats in the cargo/passenger compartmen

Condition: used, mileage: 268,000 km, power: 100 kW (135.96 HP), first registration: 05/2015, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 9, total length: 6,945 mm, total width: 1,993 mm, total height: 2,725 mm, Year of construction: 2015, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, For sale is a well-maintained Volkswagen Crafter MAXI Kombi with 6 seats and the globally popular 2.0-liter diesel engine. The vehicle is in good condition! * German vehicle * Euro 5 standard * First owner * Maintained according to service schedule * M1 passenger car registration * VAT can be shown separately Equipment: MAXI version * Air conditioning * 6 seats (up to 9 seats possible) * Auxiliary heater incl. remote control * Electric step * Passenger airbag * Heated exterior mirrors * Electric exterior mirrors * Electric windows * Central locking * and more... Technical data: Permissible total weight: 3500 KG * Unladen weight: approx. 2580 KG * Payload: 920 KG * Towing capacity: 2000 KG Why are we the right choice? Attractive financing through our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair conditions * Transit registration (5-day/customs registration) usually on the same day * Airport or train station pick-up service All vehicles are professionally detailed and hygienically cleaned! The highlights: Disinfection of the interior and ventilation system using ozone cleaning. 2-stage polishing on the exterior. * If necessary, paint correction and smart repair. All our vehicles have also undergone thorough maintenance. Of course, this includes new fluids, filters, and other work that you shouldn't have to worry about. Optionally, we can present the vehicle to an independent inspection center or workshop of your choice. We are pleased to have aroused your interest and are available to you around the clock. If you have any questions, comments, or special requests, please do not hesitate to contact us! Crsdpjzyfm Hsfx Afxjg More information and insights into our business philosophy can be found on Special equipment: Storage compartments: DIN slot in front under the headliner and luggage net on the rear tailgate, Storage compartments: DIN slot in front under the headliner, Storage compartments: Luggage net on the rear tailgate, Airbag driver/passenger side, Airbag driver side, Connection terminal, Audio system RSD 2000 (speakers in front), Mobile phone interface Bluetooth, Exterior mirrors electrically adjustable and heated, Rear turn signals (roof), Speed limiter, Isofix mounting for child seat in rear seat, Exterior temperature display, Rear headrests height-/tilt-adjustable, Spare wheel in driving condition, On-board tools and jack, Tire repair kit, Hinges for rear doors with enlarged opening angle, Mud flaps in front, Seats in the cargo/passenger compartment: 1st row, 3-seater bench, narrow, Step at rear right, Front axle reinforced Additional equipment: Storage compartments: Luggage net on the rear tailgate, Storage compartments: Flat tray/compartment, above the windshield, Airbag driver side, Anti-slip regulation (ASR), Exhaust tailpipe straight to the rear, Floor covering in the cargo/passenger compartment rubber, Headliner, Chassis: Rear shock absorbers reinforced, Suspension: Comfort suspension rear, Window in the cargo/passenger compartment: - fixed, rear left, Window in the cargo/passenger compartment: - fixed, rear right, Window in the cargo/passenger compartment: - fixed, center left, Window in the cargo/passenger compartment: - fixed, center right, Window in the cargo/passenger compartment: - fixed, front left, Window in the cargo/passenger compartment: - fixed, front right, Noise reduction additional (driver cabin), Rear tailgate with glazing

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 30,229 h, load capacity: 2,000 kg, lifting height: 5,065 mm, free lift: 1,780 mm, fuel type: electric, mast type: triplex, construction height: 2,260 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Electromechanical Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 200/50-10 Csdozp Spaspfx Afxsrg Rear tire type: Superelastic Rear tire size: 15x4.5-8 Battery voltage: 48V Battery Ah: 625Ah Battery manufacturer: IBV Battery type: PzS Battery year of manufacture: 2018 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment is workshop-tested and FEM4.004 certified. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. Of course, we also buy your used equipment, even if you do not purchase a vehicle from us. Lease purchase and financing at favorable terms are available upon request. We would be happy to provide you with competent and comprehensive advice on our vehicles. Side shifter, 3rd valve, work light (front), roof protection, windshield, full free lift, safety light, interior mirror, rotating beacon, windshield wiper, single pedal operation, LED, 3-wheel, seat.

Condition: used, mileage: 168,000 km, power: 135 kW (183.55 HP), first registration: 06/2020, fuel type: diesel, next inspection (TÜV): 06/2027, color: grey, gearing type: automatic, emission class: euro6, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, soot filter, Power steering, electric windows, heated exterior mirrors, radio, auxiliary heater, one owner, service book, very clean, nationwide delivery €295 + VAT, tow bar including installation €790 + VAT. No pending repairs, workshop-inspected. Test drive welcome, nationwide delivery €295 + VAT. Ref: 866. Opening hours: Mon–Fri 8:00–12:00 and 13:30–17:00, Saturday 9:00–11:30 Crodpey H Tdiefx Afxog More vehicles at :