Used Ground Drill for sale (6,866)

Year of construction: 1986, condition: used, • Working length (mm): 3200 • Drilling units: 3 from below, with a 3-spindle drilling head Rcodpfxo Drmxe Afgeh • Clamping cylinders: 2 from above • Pressure cylinder: 1 on the side • Control system: Siemens, newer model

Condition: good (used), Maximum drilling diameter in steel 50 mm Minimum overhang (minimum distance of the spindle axis from the body) 450 mm Maximum overhang (max. distance of spindle axis from the body) 1600 mm Minimum spindle speed 20 1/min Rjdpfxettriwj Afgoch Maximum spindle speed 2000 1/min

Condition: new, bore capacity in steel (diameter) 28 mm throat 250 mm bore stroke 130 mm morse taper 3 MK table: 380 x 380 mm turning speeds 75 - 3000 U/min engine output 1,1 kW column diameter 98 mm thread M16 ST60 dimensions 700 x 450 x 1500 mm weight 200 kg - Height adjustable and angle adjustable table - Movable work table Rcodpokahu Ujfx Afgjh - Prepared for cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: new, bore capacity in steel (diameter) 40 mm throat 275 mm bore stroke 120 mm spindle taper MK 4 turning speed range 75 - 3200 U/min 190 mm 490 mm table surface area 700 x 210 mm connected load frequency 400 V diameter of hob max. 80 mm total power requirement 1,1/1,5 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 0,8 x 0,75 x 1,85 m Rcjdpfx Asupw Uzofgsh Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank

Condition: new, bore capacity in steel (diameter) 16 mm throat 180 mm bore stroke 85 mm spindle taper MK 2 spindle diameter 47 mm spindle turning speed range 320 - 3300 U/min 230 mm 100 mm table surface area 420 x 155 mm Rcjdoupxcyspfx Afgeh connected load frequency 230 V 900 x 600 x 300 cm total power requirement 0,75 kW weight of the machine ca. 8o Kg dimensions 0,7 x 0,7 x 0,8 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank

Condition: new, grinding range 2 - 13 mm Redpfeupxdqsx Afgjch sharp cornered angle min./max. 90 - 140 Grad connected load 230 V weight of the machine ca. 10 Kg dimensions of the machine ca. 0,35 x 0,2 x 0,2 m

Condition: new, grinding range 2 - 20 mm sharp cornered angle min./max. 90 - 135 Grad Rcjdpfx Afjupxkwjgoh connected load 230 V weight of the machine ca. 8,6 Kg dimensions of the machine ca. 0,35 x 0,2 x 0,2 m

Condition: new, bore capacity in steel (diameter) 45 mm quill stroke 125 mm 560 mm 230 mm table surface area 800 x 240 mm spindle turning speed range 75 - 3200 U/min max. milling cutter diameter 80 mm spindle taper ISO 30 Rcodpfx Afeupxrnegsh max. distance between table and spindle-nose 460 mm throat 230 mm connected load frequency 400 V total power requirement 1,5 kW weight of the machine ca. 580 Kg dimensions of the machine ca. 1,2 x 1,0 x 2,1 m Equipment: All axes with 3-digital display. Quill travel has separate digit display. Automatic feed in X-axis and quill. Motorized Z-axis. tapping device. coolant system. machine base. Collet set, SK tool holder. Further machine accessories in box.

Condition: excellent (used), Year of construction: 1987, max tool diameter: 16mm max hole depth: 160mm Rsdpoqwdxxjfx Afgjch max milling length: 160mm front/rear drilling apparatus adjustment working table dimensions: 620x280mm table rotation angle: +20˚ adjustment of table up/down and sideways material pressure motor power: 1,5kW dimensions L/W/H: 1100x650x1200mm weight: 280kg

Condition: new, bore capacity in steel (diameter) 40 mm throat 290 mm bore stroke 130 mm spindle taper SK 40 spindle turning speed range 70 - 3200 U/min 520 mm 230 mm table surface area 730 x 210 mm connected load frequency 400 V total power requirement 1,1/1,5 kW weight of the machine ca. 0,32 t dimensions of the machine ca. 1,1 x 0,9 x 1,15 m domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm Rcjdofv H Hqopfx Afgeh • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional.

Condition: new, bore capacity in steel (diameter) 40 mm throat 290 mm bore stroke 130 mm spindle taper SK 40 spindle turning speed range 75 - 3200 U/min 500 mm 230 mm table surface area 720 x 210 mm connected load frequency 400 V diameter of hob max. 80 mm total power requirement 1,1 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,1 x 0,9 x 1,2 m domestic equipments • Digital display Rjdpfxsfv H Huj Afgech • Digital depth gauge for quill • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional.

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 Rsdpfx Asfg U Tpefgjch spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, bore capacity in steel (diameter) 50 mm bore capacity in cast iron (diameter) 60 mm threading cutting capacity: M36 throat 400 mm bore stroke 230 mm spindle taper MK 4 feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range 54 - 1032 U/min transmission ratio 12 Stufen column diameter 200 mm table surface area 550 x 550 mm total power requirement 3,0 kW Rcodpofg U Ttjfx Afgoh weight of the machine ca. 0,72 t dimensions of the machine ca. 0,6 x 1,2 x 2,6 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: good (used), Year of construction: 1955, Radial drilling machine, drilling machine, boom drilling machine -Projection: 2055 mm -Max. distance from machine table to spindle mount: 1700 mm -Conical mount: MK5 -Motor power: 7.5 kW -Speeds: 11.2-1400 rpm -Columns: Ø 450 mm -Spindle stroke: 540 mm -Thread cutting device -Automatic feed: 0.037-2.0 mm/rev -Clamping surface: 920 x 1600 mm -Dimensions: 2580/1110/H3450 mm -Weight: 6465 kg Rodpfx Ajd Enr Iofgjch

Condition: good (used), Suhner Sumatic BEM 20 + Polydrill Drilling Unit Manufacturer: Suhner Model: Sumatic BEM 20 + Polydrill kW: 2.2 V: 380/220; 460/230 A: 5.7/9.8; 4.9/8.5 Hz: 50/60 RPM: 940 / 1150 Rcjdjd Huvqopfx Afgsh Spindle mount: 13 mm, 25-125 mm, double spindle drill head

Condition: used, Year of construction: 1980, machine/vehicle number: 17209, functionality: fully functional, power: 1.5 kW (2.04 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, spindle mount: MK 3, height adjustment type: mechanical, rotational speed (max.): 1,750 rpm, rotational speed (min.): 130 rpm, total height: 2,000 mm, throat depth: 290 mm, Equipment: rotational speed infinitely variable, Used column drill press Manufacturer: Alzmetall Type: AB 3 ESV Redpfxezldquj Afgjch Machine number: 17209 Year of manufacture: 1980 Drilling capacity in cast iron: Ø 35 mm Drilling capacity in steel (diameter): 28 mm Spindle speed via 2 gear stages, 2 motor speeds, and continuously variable via a variator gear 130 - 1750 rpm Spindle taper: MK 3 Feed rate: 0.1; 0.2; 0.3 manually/automatically mm/rev Distance spindle/table min/max: 80 - 680 mm Table clamping surface: 500 x 370 mm Table rotatable: 360° Drill table adjustment: 600 vertical mm Overhang: 290 mm Quill stroke: 165 mm Column diameter: Ø 120 mm Equipment: - Coolant system - Speed indicator - Work light - Röhm Spiro quick-change chuck 1-13 mm - Ejector on chain - Emergency stop button Machine weight approx.: 285 kg Machine dimensions approx.: 0.9 x 0.6 x 1.9 m (LxWxH)

Condition: good (used), Year of construction: 2003, functionality: fully functional, Voortman V603 / VB750 CNC Drilling / Sawing Line – Year 2003 Rcjdpfoz Hd Sfox Afgjh Three Spindle. 18 metres In-Feed. 13.5 metres Out-Feed. Pusher Unit Feed. In-Feed Cross Transfers. Out-Feed Cross Transfers. 750mm Section Capacity.

Condition: used, Year of construction: 1990, Archdale Radial Drill. Spindle speeds 475-2000. Box table Power Rise and Fall DC Injection Spindle Break Speeds 4-2000 rpm Rsdpfez Hfdvsx Afgjch 8 Hp.

Condition: used, Year of construction: 1989, Technical details: bore capacity in steel (diameter): 1-13 mm arm length: 100 mm workpiece height max.: 400 mm total power requirement: 3 kW dimensions of the machine ca.: 2.0 x 1,2 x 2,2 m bore spindle turning speed range: 0-3000 U/min boring spindle drive: 2,2 kW max. Y-axis travel: 550 mm max. Z-axis travel: 300 mm The machine has a 2.2 kW spindle motor with a 2-stage gearbox for drilling and tapping. Table size is 100 x 50 cm Stroke length approx. 200 mm * Rjdpfx Asz Hfl Tofgjch

Condition: good (used), functionality: fully functional, Gillardon GB30 pillar drilling machine Speed range: 60-1600 rpm Spindle taper: MK3 Overhang: approx. 320 mm Rsdpoz Ngr Isfx Afgjch Drive power: 1.1/1.6 kW Column diameter: approx. Ø 130 mm Drill spindle stroke: approx. 175 mm Table clamping surface: approx. Ø 500 mm with 14mm T-slots Table swivel range: approx. + / – 90 degrees Dimensions: 1000x500x1970mm Weight approx. 400 kg

Condition: used, Small Drilling/Milling Machine ISERT ELECTRONIC Rcjdjz Nxwcspfx Afgsh Travel X: 350 mm Travel Y: 300 mm Travel Z: 70 mm Rotation: 8000 / 9500 / 13500 / 20500 / 24000 RPM The machine could be used for drilling printed circuit boards or other use. The machine was controlled through a PC that is no longer present. Possibility to use it in manual Equipped with: 1 Milling Machine KRESS Voltage: 220 V mono Dimensions (L x W x H): 950 x 700 x 700 mm Weight: approx 60 KG

Condition: used, Radial Drilling Machine BERGONZI type UT 25 Spindle: CM3 Spindle exit: 150 mm Spindle speed: from 130 to 900 RPM Arm travel: 500 mm Max height table/spindle nose: 900 mm Rjdpfx Aoz Nxtksfgoch Column: Ø 180 mm 2 speeds motor Auto descent Return Spring defective Electric arm rise Delivered with: 1 cube Length 500 mm x Depth 400 mm x Height 450 mm 1 false table Lubricant pump Voltage: 380 V Length: 1500 mm Width: 900 mm Total height in height position: 2300 mm Weight: approx 1,2 T

Condition: used, Year of construction: 1998, Fehlmann Picomax 60M Rcodpfx Asz N Huvofgjh

Condition: excellent (used), Attachment holders, standard holders and accessories, spiral drill bits, BILZ spiral drill bits, reaming bits, BILZ reamers, BILZ holders, tool holders, drill bit mounts, twist drills -Mounted tool holder: 8 pieces Rsdpfx Afsyrgwxsgjch -Recordings: MK5, MK4, MK3 -Spiral drill bits: 35 pieces -Sizes: Ø38 mm - Ø95 mm -Dimensions: see photos -Submission/Price: complete -Transport dimensions: 550/300/H70 mm -Weight: 28 kg

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1445 € 19 mm Weldon 1 kW 307 mm 221 mm 317 mm 135 kg 36 mm 51 mm 70 mm 350 U/min 6 mm New PRO-36 AUTO is equipped with unique LED monitoring system that indicates current condition of the drill and gives additional safety and diagnostic information. Redpfx Afsyrhppegech Auto Feed Smart Drive System optimizes parameters for each cutting/milling operation, when drill works in automatic mode. The drill controller keeps choosing the most effective working conditions based on the correlation of motor load, feed speed and the range of allowable cutting parameters for a given tool type and hole diameter. It results in extending tool life of both HSS and TCT cutters and enhanced machine performance. Countersinking and working on thin workpieces, when the LED shows that the clamping force is low (flashing green) are possible in manual mode only. A safety strap protects the machine from falling in case of a clamping loss. Features and benefits: • LED Monitoring System indicates current condition of the drill and gives safety and diagnostic information • LED Monitoring System flashes green when inadequate adhesion is detected due to e.g. gap or thin workpiece • Auto Feed Smart Drive optimizes the milling parameters for each tool individually depending on its type (HSS or TCT) and hole diameter from 12 mm up to 36 mm, that significantly extends tool life • tilt sensor stops the motor if machine breaks away • dual bars guide system ensures extraordinary stiffness and adjustment free operation • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Auto-feed control stops the machine when cutter goes through • protection against auto restart after power cut off • compact, rigid design with ultra-light weight of 13.5 kg Standard shipping set: • Drilling machine • Metal box • Safety strap • Cooling system bottle • Chip guard • 4 mm hex wrench • Operator’s Manual