Used Hand Drill for sale (12,194)

Condition: excellent (used), Year of construction: 2009, drilling depth: 350 mm, workpiece weight (max.): 1,600 kg, table load: 1,600 kg, Deep hole drilling machine Mollart - LD8 - 150 Pellet Die Number of Spindles 8 Gun Drilling Diameter Range 1.5mm-10mm (Per Spindle) Maximum Drilling Depth 150mm Drill Spindle Stroke 350mm Pellet Die Diameter 500mm-1550mm B-Axis Accuracy +/- 6 Arc Seconds Y-Axis Vertical Travel 400mm Gun Drill Speed Range 0-14,000 RPM Max. drill Ø steel 1.5 - 10 mm Drilling depth 350 mm Table load 1600 Speeds / ranges 14000 Rpm Dimensions (Estimate) Length 4500 mm Width 4500 mm Height 2300 mm Nwedsyilgdopfx Ag Ioc Weight 12000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2022, Vertical Drilling machine Nwjdoynl S Tspfx Ag Ijc

Condition: new, pressure 1,5 kN stroke 40 mm throat 70 mm Working height from to 75 - 170 mm table surface area 115 x 70 mm weight of the machine ca. 11 Kg dimensions 115 x 175 x 290 mm Hand presses with rack HZ 150 The power is transmitted via a rack and pinion construction. she finds their use where during the working process a constant pressure is needed. Precisely manufactured, spindle hardened and ground, unlimited service life Long spindle guide, optimal pressure performance, Nwsdpfxefv Av Ds Ag Iec T-slot according to DIN 650 milled in the middle, sliding blocks fit exactly.

Condition: new, bore capacity in steel (diameter) 30 mm throat 260 mm bore stroke 135 mm spindle taper MT 3 MK table: 420 x 350 mm column diameter 135 mm turning speeds 125 - 3030 U/min feeds 0,1 - 0,2 - 0,3 mm/U total power requirement 1,1 kW weight of the machine ca. 380 kg. range L-W-H 0,9 x 0,55 x 2,2 mm High-quality drill press with a high speed range for the Nedpfefv H H Aox Ag Iswc industrial use.

Condition: new, bore capacity in steel (diameter) 25 mm throat 185 mm bore stroke 50 mm spindle taper MK 3 spindle turning speed range 50 - 2500 U/min 178 mm 480 mm table surface area 700 x 180 mm Nedpsd Sb Aysfx Ag Iewc connected load frequency 230 V total power requirement 0,75 kW weight of the machine ca. 160 t dimensions of the machine ca. 0,75 x 0,8 x 0,9 m domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional.

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: 30282, functionality: fully functional, Alzmetall AB 32/SV-RFT20 drilling machine with fixed table in very neat condition. Specifications: Drilling capacity in steel ST60: 32/40mm Spindle travel: 160mm Tapping capacity: M24/M30 Spindle taper: MK4 Automatic feed in 3 steps: 0.1/0.2/0.3mm Minimum distance spindle-table: 300mm Maximum distance spindle-table: 950mm Distance spindle-column: 300mm Speed: 62-2000rpm variable in 4 steps Nodpfx Aoyanmqsg Iowc Table clamping area: 760x770mm Weight: 760kg

Condition: new, Year of construction: 2026, functionality: fully functional, New KAO MING hydraulic radial drilling machine, year of construction 2026. Specifications: Maximum distance between spindle center and column face: 1250mm Minimum distance between spindle center and column center: 360mm Column diameter: 350mm Column height: 2685mm Base floor space: 2035x840mm Total floor space: 2335x1140mm Base height: 188mm Spindle head longitudinal travel: 890mm Vertical arm travel: 700mm Nwsdpfx Agjykkhxs Ijc Spindle travel: 300mm Spindle taper: MK5 Table work area: 1393x820mm Main spindle motor: 3.7kW (5hp) Spindle speeds: 25–1310rpm (12 steps) Feed range: 0.06mm/rev to 1.12mm/rev (12 steps) Drilling capacity in cast iron: 60mm Drilling capacity in steel FC20/S45C: 50mm Weight: 3460kg

Condition: used, mileage: 750,000 km, power: 132 kW (179.47 HP), first registration: 09/2017, fuel type: diesel, overall weight: 3,500 kg, color: red, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 6,000 mm, Equipment: ABS, air conditioning, central locking, soot filter, Chat now via WhatsApp: Contact our sales consultant quickly and easily. Attention !!! Sale primarily to business customers! Repair invoices amounting to over €30,000 available!!! (New transmission / new driveshaft / new engine components / etc.) Internal ID number: [3131] ---* Tow bar retrofitting available upon request Njdpfoyixx Aox Ag Iswc ---Vehicle Highlights: * 19% VAT deductible * Regularly serviced * German vehicle * 1 owner * Euro 6 emissions standard * 3-liter engine * High roof & long wheelbase * Automatic transmission * Reversing camera * Comfort driver’s seat * Cruise control Special equipment: Storage package, dashboard storage compartment with USB port and wireless charging tray, audio navigation system: CD player with MP3 capability, USB & Bluetooth hands-free, additional overhead storage with DIN compartment, A-pillar grab handle, rear door (opening angle 260/270°), wooden floor in load compartment with wheel arch cladding and tall side/door trim, automatic climate control, comfort headrests in passenger compartment, 90-liter fuel tank, parking sensors, comfort (hydraulic) driver’s seat in cabin Further features: Driver’s airbag, pre-wiring for trailer socket, traction control (ASR), S-series configuration, side exhaust pipe on left, power-adjustable and heated exterior mirrors, brake assist, cargo area roof light, electronic brake-force distribution, rear suspension: parabolic, front suspension: transverse leaf spring, rear wing doors, tinted windshield & side windows, 150 A alternator, Hi-Matic 8-speed automatic transmission, body type: high roof panel van, multifunction display with pixel matrix, bulkhead, headlight range adjustment, 3.0L – 132 kW diesel engine, wheelbase: 3520 mm, tire repair kit, Euro 6 low-emission, right-side sliding load/passenger compartment door, adjustable single passenger seat (3-way) in cab, service indicator, gross vehicle weight: 3.50 t ---Leasing or financing required? We offer attractive options – also available with no down payment! Feel free to contact us. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00–18:00 Sat: 9:00–14:00 ---Note: All information provided online is subject to change and serves only as a general description of the vehicle. We reserve the right for errors, mistakes, and prior sale. The binding specification of the vehicle is determined exclusively by the purchase agreement on site or through written confirmation. Vehicles with more than 50,000 km mileage or older than 3 years are primarily sold to our business customers.

Condition: used, functionality: fully functional, Year of construction: 2022, load capacity: 1,500 kg, fork length: 2,000 mm, empty load weight: 95 kg, drive type: Handbetrieb, construction width: 520 mm, Hand pallet truck Fork width: 155 mm Technical condition: New Nwsdpfx Agoynhczo Ioc Front tyre type: Polyurethane Rear tyre type: Polyurethane

Condition: new, functionality: fully functional, Year of construction: 2024, load capacity: 2,000 kg, lifting height: 205 mm, construction height: 1,170 mm, fork length: 1,140 mm, empty load weight: 62 kg, total length: 1,475 mm, drive type: Handbetrieb, construction width: 520 mm, Hand pallet truck Fork width: 160 mm Condition: New unit Technical condition: New Front tyre type: Solid rubber Front tyre condition: New Rear tyre type: Solid rubber Rear tyre condition: New Description: Logitrans Panther Silent: Pallet truck enabling silent and trouble-free transport of pallets—even outdoors! (Especially suitable for supermarkets and DIY stores), noise level below 60 dBA, special soft rubber wheels (steering and fork rollers) protect sensitive flooring, steering wheel: 200 x 50 mm, fork rollers: tandem 85 x 88 mm, the pallet truck features permanent quick lift. Nsdpsynhcujfx Ag Iowc

Condition: new, functionality: fully functional, Year of construction: 2024, load capacity: 2,500 kg, lifting height: 205 mm, construction height: 1,170 mm, fork length: 1,140 mm, empty load weight: 62 kg, total length: 1,475 mm, drive type: Handbetrieb, construction width: 520 mm, Hand pallet truck Fork width: 160 mm Condition: new device Technical condition: new Front tyre type: polyurethane Nwedpfx Agoynhcno Iec Front tyre condition: new Rear tyre type: polyurethane Rear tyre condition: new

Condition: used, Column Drilling Machine IXION - MAXION Type Unimax 3 Serial No. 203063 Year of manufacture: 2009 Drilling capacity: 30 mm Spindle taper: MK 3 – short quill Throat: 260 mm Quill stroke: 125 mm Table size: 360 x 500 mm Column diameter: 110 mm Spindle speed: 80 - 3200 rpm, infinitely variable Motor power: 0.8 / 1.5 kW Nodpfxoykca To Ag Iswc Power supply: 400 Volt, 50 Hz - Spindle speed adjustable via 2 V-belt stages, 2 motor speeds and stepless variator drive - Digital speed display - Motor speed setting 1 for clockwise and counter-clockwise operation, setting 2 for clockwise operation only - Drill table height adjustment via hand crank - Drill chuck RÖHM Ø 1 to 16 mm - Emergency stop button Required space (L x W x H): 800 x 530 x 1800 mm Weight: 230 kg Very good condition

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Nwsdpfx Ajxwaz Hsg Isc

Condition: used, Year of construction: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release sequence, including electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling. This saves the need to adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, flat-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit changeover. - Easy pivoting of the drilling unit from 0° to 90°, assisted by gas cylinders. - 1 clamping beam movable on Y-axis with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Nwjdpfx Ajxnlflog Iec Ideal fence system consisting of: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops. - Quick-change system, easily switchable from right to left stop for mirrored drilling of shelves in carcass construction; also suitable for line boring in system 32. - Side stops and position adjustments, as well as drilling height position, via mechanical digital counters on the support table. - Side stops can be easily folded away for fastest set-up change from carcass to frame or line drilling. - Clamping arms for the clamping beam enable line boring positions up to max. 300 mm. - Optimized three-stage tool system. Includes 1 set of dowel drill bits: - 5 carbide dowel bits, Ø 8x77 mm, right - 4 carbide dowel bits, Ø 8x77 mm, left Basic machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard version, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release, electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth for end drilling saves the need to adjust depth when switching from flat to end drilling (+10 mm, e.g. for dowel length 35 mm, flat-side depth 14 mm and end-side depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill changeover. - Easy pivoting of the drilling unit from 0° to 90°, gas spring assisted. - 1 clamping beam, Y-axis adjustable, with 3 pneumatic clamps for workpieces up to max. 80 mm high. - Ideal stop system comprising: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, quick-change system, easily switched from right to left for mirrored shelf drilling in carcass constructions, also usable for line boring in system 32. - Side stops and adjustable positions, as well as drill height position, via mechanical digital counters on the support table. - Side stops can be folded away easily for shortest retool time from carcass to frame and line boring operations. - Clamping arms for the clamp beam suitable for line-boring positions up to max. 300 mm. - Three-stage optimized tool system. Extraction funnel, dust tested, Ø 120 mm 1 set for line boring in system.

Condition: used, Year of construction: 1979, arm length 1600 mm Nwedpfx Ajyigbceg Ioc taper MK 5 weight of the machine ca. 3 t

Condition: used, mileage: 209,000 km, power: 77 kW (104.69 HP), first registration: 12/2008, fuel type: diesel, overall weight: 2,315 kg, color: white, gearing type: mechanical, emission class: euro4, number of seats: 2, total length: 4,875 mm, total width: 1,794 mm, total height: 1,841 mm, Year of construction: 2008, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Special equipment: Driver/passenger airbag, rubber flooring in passenger/cargo area Nwjdjyndzgjpfx Ag Isc Further equipment: Driver airbag, traction control system (ASR), aspherical exterior mirror, left, rubber flooring in front, rear wing doors with glazing, body/construction: panel van, child safety lock in passenger compartment, high cargo partition, without window, headlight range adjustment, engine 1.9 L – 77 kW TDI, rear fog light, non-smoker package, wheelbase 3002 mm, right sliding door, side protection strips, upholstery: fabric, steel wheels 6x15, green-tinted heat-insulating windows

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, CMA automatic coordinate drilling machine type GRD 40 CNC 3030 table size: 3000x3000 mm X-axis speed: 18 m/min Y-axis speed: 12 m/min Z-axis speed: 5 m/min spindle-to-table distance: 160-660 mm table height: 770 mm Drilling capacity: Steel 60: 40 mm Cast iron: 40 mm spindle speed: 750-3000 rpm Spindle taper: BT40 motor power: 7.5 kW Nsdpew Tidkofx Ag Iowc total machine weight: 8,500 kg

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Nsdpfx Ageyi Im As Ijwc Equipment and technical data: smooth operation Spindle MK 3 Motor: 400 V, 0.55 kW Availability: approx. mid-April 2026 Storage location: Hesse

Condition: excellent (used), Year of construction: 2003, column diameter: 400 mm, drill diameter: 65 mm, Drilling ; Tapping in all directions Can be moved in 7 axes Fast preparation, accuracy and performence on heavy and bulky parts. Field using Turbines, Generators, Compressors, Steel Construction, Boilers Containers, Chemoical equipment, furnces of cement work and shipbuilding Nwjdpfjyh Dr Nox Ag Ijc Arm Length: 2070mm Max. drill Ø cast: 65mm Max. tap Ø: 48M Stroke pinole: 350mm Max. distance spindle - table:1550mm Min. distance spindle - table:305mm Speeds / ranges: 900Rpm Spindle Taper: 5ISO/Bt/Mk Column sleeve: 400mm Power: 4kW Max. drill Ø steel: 50mm Length: 3500mm Width: 1325mm Height: 3400mm Weight: 6570kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, mileage: 730,000 km, power: 330 kW (448.67 HP), first registration: 10/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2027, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, * Listing/Vehicle No.: MTE09BDF * Office: * WhatsApp: * Mobile: * Email: * Website: Rental of various trucks, tractors (semi-trailer units), and trailers for short- or long-term hire. 7.5t rentals starting at €699.00/month and 18t from €1,xxx/month, available at short notice! Contact us for details. 1x Mercedes Benz Actros 1845L BDF * Year of manufacture: 10/18 * Export model: 19 * Mileage: 730,000 km Nwodpsxvaf Aefx Ag Ijc * Underrun foldable tail lift DAUTEL DS 00VA * Euro 6 with AdBlue * Secondary water retarder * Wheelbase: 5,500 mm * Anti-roll control assistant * Lane keeping assistant * Adaptive cruise control * Attention assist * Turn assist system * Active Brake Assist 4 * Automatic climate control * Leather steering wheel * Refrigerator * StreamSpace cab * Air suspension front axle * Air suspension rear axle * Tyres: 315/60 R22.5 * German vehicle * 1st owner * TÜV (roadworthiness certificate) available on request for an additional charge! Net price – trade-ins accepted – Rental/financing/leasing brokerage available – Specifications subject to change, prior sale, typographical errors and mistakes excepted! We deal exclusively in well-maintained German vehicles. Our services: all export customs documentation, Euro1 * Transit plates / 5 days * Customs plates / 30 days * Vehicle delivery * Vehicle collection * Main inspection (TÜV) and safety test Our contact details and opening hours: Office: * WhatsApp: * Mobile: * Email: * Website: * Monday - Friday: 09:00 - 18:00 Saturday: by appointment * Tail lift * Parking heater Speed regulation: Adaptive cruise control (distance-regulated) Air conditioning: Automatic climate control Hydraulic system: None Safety: ABS * EBS * ESP * Retarder/Intarder

Condition: used, mileage: 595,000 km, power: 290 kW (394.29 HP), first registration: 06/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2027, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Listing/Vehicle No.: MTG45BDF * Office: * WhatsApp: * Mobile: * E-Mail: * Website: Rental of various trucks, tractor units, and trailers for short or long-term rental. 7.5t from €699.00 and 18t from €1,000.00 per month, available at short notice! Please contact us for details. 1x Mercedes-Benz Actros 25, swap body chassis * Year of manufacture: 06/2015 * VIN: 1L968XXX * Euro 6 with AdBlue * Mileage: 595,000 km * Secondary water retarder * Wheelbase: 4,600 mm * Payload: 16,000 kg * Anti-roll stability assist * Attention assist * Lane keeping assist * Adaptive cruise control (distance assist) * Full air suspension * Lifting axle * 2x aluminum tank * Trailer coupling * Bi-xenon headlights * Illuminated Mercedes-Benz star * Air conditioning * Cruise control * Refrigerator * CD radio with Bluetooth * Multifunction steering wheel * Tires: 315/70 R22.5 * German vehicle * TÜV inspection available upon request and for an additional charge * Matching swap-body trailer available Net price – Trade-in possible – Rental/financing/leasing brokerage available – Subject to alterations, prior sale, typographical errors and mistakes. We exclusively deal with well-maintained German vehicles. Our services: all customs and export documents, Euro 1 certificate * Temporary license plate / 5 days * Export license plate / 30 days * Vehicle delivery * Vehicle pick-up * General inspection and safety check Our contact details and opening hours: Nedpfx Asxvwtdeg Iowc * Office: * WhatsApp: * Mobile: * E-Mail: * Website: * Monday - Friday: 09:00 – 18:00 * Saturday: by appointment

Condition: used, mileage: 695,000 km, power: 340 kW (462.27 HP), first registration: 01/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2027, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Listing/Vehicle No.: MTG19SZM * Office: * WhatsApp: * Mobile: * Email: * Website: Rental of various trucks, tractors, and trailers for short- or long-term hire. 7.5 t from €699.00 and 18 t from €1,XXX.00 per month, available at short notice! Contact us for details. 1x DAF XF460 FT Tractor Unit SSC * Chassis number: 0G136XXX * Mileage: 695,XXX km * LowDeck / Mega * Euro 6 with Ad-Blue * Retarder * Air conditioning * 2x aluminum tanks Nwjdpfoxvaklsx Ag Isc * Refrigerator * Multifunction steering wheel * Radio with CD * CB radio * SuperSpace cab with 2 beds * Front and rear air suspension * Tires: 315/60 R22.5 front, 295/60 R22.5 rear * German vehicle * 1st owner * Accident-free * TÜV (roadworthiness certificate) NEW available upon request for an additional charge! Net price – Trade-in possible – Rental/Financing/Leasing brokerage available – Subject to changes, prior sale, typing errors, and mistakes! We exclusively deal with well-maintained German vehicles. Our service: All customs/export documentation, Euro 1 * Temporary number plates / 5 days * Export number plates / 30 days * Vehicle delivery * Vehicle pickup * Main inspection (TÜV) and safety check Contact details and opening hours: Office: * WhatsApp: * Mobile: * Email: * Website: * Monday - Friday: 09:00 - 18:00 * Saturday: by appointment

Condition: good (used), Rotary hammer, chisel hammer, combination hammer, Bosch hammer -Drilling/Chiseling -SDS Plus: Recording Nwodpfx Asb A Rl Iog Ioc -Transport case -Weight: 5 kg

Condition: new, We are selling various new Hilti vacuum drills from our remaining stock. Total new price €18,565.78. Selling price: 50% of the new price. Njdext Uflepfx Ag Iowc

Condition: used, mileage: 70,000 km, power: 120 kW (163.15 HP), first registration: 08/2023, fuel type: diesel, overall weight: 2,800 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, soot filter, Chat with us now via WhatsApp: Quick & easy contact with our sales advisor. Attention!!! Sale preferably to business customers. Internal ID Number: [ 3139 ] ----Optional packages: * 12–64 months warranty (valid EU-wide) * New inspection * New TÜV & emissions test * Nationwide delivery * Financing available even without down payment * Spring offer: On request and for an additional charge of only €999, increase towing capacity up to 3,500 kg (vehicle- and manufacturer-dependent). ----Vehicle highlights: * 19% VAT deductible * 1 owner * Euro 6 emission standard * Regularly serviced * German vehicle * Immediately ready for use * Long wheelbase * Automatic climate control * Reversing camera * Cargo area with wood cladding Special features: Audio System Audio 30 (DAB, Bluetooth), DAB tuner (digital radio reception), rear door without glazing (opening angle 180 degrees), wood flooring in cargo area, comfort lighting in passenger/cargo area, spare wheel carrier at rear frame incl. jack, reversing camera, seats in driver’s cab: passenger seat as double bench, panelling in load/passenger compartment: plywood, lashing rails in cargo area - sidewalls at belt height, two-way speakers front Further equipment: 3-button remote for central locking, third brake light, adaptive brake light, passenger airbag, driver airbag, hill-start assist, trailer hitch: electrics for trailer socket, aspherical exterior mirrors both sides, electrically adjustable and heated exterior mirrors both sides, outside temperature display, roof rack fastening rails, BlueEfficiency package, brake assist, ceiling light in cargo area, Design and Equipment Line PRO, automatic headlight activation, driver assistance system: Attention Assist (fatigue sensor), breakdown management assistance system, crosswind assist, windscreen with antenna, 250 A alternator, speed limiter 210 km/h, cup holders front, seatbelt tensioners, lockable glove compartment, body/build: standard panel van, body/build: long, instrument cluster with pixel-matrix display, communication module (LTE) for digital services, main fuel tank 57 liters, full-width cargo partition, load securing/lashing points, steering wheel (mechanically adjustable), multi-function steering wheel incl. trip computer, Mercedes-Benz emergency call system, model update, engine 2.0 l – 120 kW CDI CAT, rear fog light, Pro, wheelbase 3,200 mm, tires 205/65 R16C 103/101 T, low emissions Euro 6d, windshield wipers with rain sensor, sliding side door right, seatbelt warning system (driver/passenger), seat cloth/upholstery: fabric, cab seats: driver comfort seat, driver’s seat with lumbar support, steel wheels 6.5x16, C-pillar panelling, half-height hard-fibre lining in load/passenger area, fleece battery 92 Ah, service interval display Assyst, heat-insulating glazing, perm. gross weight 2.80 t ----Leasing or financing needed? We offer attractive offers—even without down payment! Feel free to contact us. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 Nsdpfx Agoyh Tkne Iewc 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 – 18:00 Sat: 9:00 – 14:00 ----Note: All information provided online is non-binding.