Used Handling Robot for sale (12,647)

Condition: used, 4-axis industrial robot, handling robot, SCARA robot, handling robot, loading robot, placer STÄUBLI type TS80 + CS8C bmn Year of manufacture 10/2011 Serial no. F11/5JN5A1/A Year 2011 Number of axes 4 Handling weight (rated load) 2 kg Handling weight (maximum load) 8 kg Arm reach 800 mm Repeat accuracy (X+Y) 0.01 mm Repeat accuracy (Z) 0.004 mm Repeat accuracy (R) 0.002° Working range axis 1 +-280° Working range axis 2 +-310° Stroke axis 3 (Z-axis) 200 mm Rotation axis 4 (R-axis) +-500° Nominal speed / maximum speed: Axis 1 350 / 490 °/s Axis 2 500 / 620 °/s Axis 3 1600 / 2220 mm/s Axis 4 1200 / 1929 °/s Axes 1 + 2 8.11 / 10.84 m/s Robot configuration floor mounting Controller STÄUBLI CS8C bmn Serial no. F11/5JN5A1/C Rated voltage 1 x 230 VAC Rated frequency 50 - 60 Hz Connected load 1700 VA Dimensions of controller (W x H x D) 450 x 310 x 450 mm Codpjvmhphefx Ak Asri - Controller adjacent with removable "Teach in" operation - Material gripper, workpiece gripper HELLA / MADER Total weight 190 kg Transport footprint L x W x H 900 x 700 x 1500 mm Very good condition

Year of construction: 2017, condition: used, current 70 A capacity 95 Ah Payload 200 kg weight of the machine ca. 190 kg dimensions of the machine ca. 1420x450x260 m These can be automatically connected and disconnected using a system consisting of lifting bolts and snap locks in conjunction with an RFID reader for overcarriage detection. The maximum tensile load is approx. 1,500 kg. Forward and reverse travel possible. 7" touch display for easy operation. Csdpoyapfnofx Ak Asri AGV operating voltage: 24 DC V Charging station operating voltage: 48 DC V Charging time at 48V / 32A: 4 hours (may vary) Nominal voltage of energy unit: 24 V Gobijru Ezloc S H Efjtt Capacity: 95 Ah Maximum current: 70 A Operating temperature range: 5-30 °C Positioning accuracy: + / - 10 mm (may vary) Min. turning radius: 1 m Maximum speed: 1.0 m/s (may vary) Continuous running time without load: 800 min (may vary) Housing material: Powder-coated aluminum, steel-reinforced base plate Dimensions (L/W/H): 1420/450/260 mm AGV weight: 190 kg Weight of additional plates (for pulling tasks): 68 kg Load capacity: 200 kg (may vary)

Condition: good (used), Year of construction: 2009, Handling device Sepro SR Access 22 S3 DB Touch 2 x = 650 mm y vert. = 1400mm Z = 1500 mm (+ C + A) R1, R2, year: 2009, Price: 9.900 Euro, Contact: Mr. Rainer Eckerle Crjdpfx Akod S Iucj Aei

Condition: used, Year of construction: 2000, number of controlled axis 6 Payload 90 kg throat 2810 mm total power requirement ca. 20 kW Credpfx Ajyclmaok Aoi weight of the machine ca. ca. 1 t dimensions of the machine ca. 5,0 x 5,0 x 3,1 m A1: +/- 185° A2: -40° / +93° A3: -210° / +58° A4: +/- 350° A5: +/- 120° A6: +/- 350°

Condition: good (used), Year of construction: 2020, Sepro 5 Dual DA 11 x=500 mm y vert=1000mm Z(horiz.)=2500mm (C ) R1 Crjdex Uqfajpfx Ak Aoi year 2020 price: €16,500.00 contact: Mr. Rainer Eckerle

Year of construction: 2005, condition: good (used), robot handling device Sepro SR 4020 S3 DB x=600 mm y vert. =1100mm Z=2500 mm (+C) R1 year: 2005 price: 8.950 Euro contact: Mr. Rainer Eckerle Crjdpjphn A Hofx Ak Aji

Year of construction: 2005, condition: good (used), robot handling device Sepro SR 4020 S3 DB x=600 mm y vert. =1100mm Z=2500 mm (+C) R1 year: 2005 price: 8.950 Euro contact: Mr. Rainer Eckerle Csdpfx Aephn Afsk Asri

Condition: used, Year of construction: 2007, Manufacturer: Wittmann Type: W 702 Year of manufacture: 2007 to look at and try out!! Crsdpjvyhn Defx Ak Aoi

Condition: used, Year of construction: 2011, Manufacturer: Wittmann Crsdpovyhpbofx Ak Aoi Type: W702 Year of manufacture: 2011 The device is fully functional and can be inspected and tested! Without program controller!

Condition: used, Pneumatic pick and place manipulator, loading unit similar to a SCARA robot with a parallel gripper. Handling device, handling system, pick-up gripper, loading gripper for automation. Horizontal axis with guide cylinder, linear module type SM 32/150 (column module GEMOTEC). Vertical axis with guide cylinder, linear module type SM 20/060 (column module GEMOTEC). Parallel gripper type GMP 20. Load capacity: max. 2 kg. Horizontal movement: 150 mm (pneumatic). Vertical movement: 60 mm (pneumatic). Vertical adjustment on the two support columns: 435 mm (manual, with clamping). Codpfxjz D Hxis Ak Aeri Support columns, vertical guide column: Ø 45 mm. Guide column, linear module type SM 32/150: Ø 20 mm. Guide column, linear module type SM 20/060: Ø 12 mm. Mounting foot: 180 x 75 mm. - Can be moved pneumatically in two axes. - Part gripper, parallel gripper type GMP 20 (65 x 35 mm). Space requirement L x W x H: 550 x 160 x 550 mm. Weight: 17 kg. Very good condition. Various manipulators available, see our webshop.

Year of construction: 2005, condition: good (used), robot handling device Sepro SR 4010 S3 DB x=400 mm y vert. =1000mm Z=1600 mm (+C) R1 year: 2005 Crodpfx Aophnztjk Aei price: 6.900 Euro contact: Mr. Rainer Eckerle

Condition: used, 2-axis pick-and-place unit, loader, servo robot, workpiece gripper, component insertion unit, pick-and-place robot Pick-up device, handling device for presses, lathes, etc. GETECHA, Type GL-20S Serial No. 13836, Year of manufacture 10/2003 Travel range, Z-axis: 1900 mm Travel range, Y-axis: 250 mm Travel speed, Z-axis: max. 1100 mm/sec. Travel speed, Y-axis: max. 227 mm/sec. Continuously variable travel speed in the Y and Z axes via servo motors SMB - Precise axis movement via linear guides - Control system: epis - Control panel located nearby - Interfaces for conveyor belt, gripper magnets, ejector cylinders, vacuum, gripper - External monitoring inputs for emergency stop, press open, press closed, safety doors closed, automatic mode - Mounted gripper with 3 lifting magnets, 3 pneumatic ejector cylinders (30 mm stroke), 1 pneumatic clamping cylinder (40 mm stroke) - Operating hours: 25998 hrs. The unit was used as a loader/pick-up device on a press. Space requirement L x W x H: 2900 x 1800 x 2000 mm Cjdsharwyopfx Ak Ajri Weight: approx. 800 kg Good condition

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Fanuc M Series Robot Unit Complete - Type: M1IA0.5A-30P-O-CE..+ The M-1𝑖A/0.5A is a high-speed, 6-axis Delta robot, ideal for compact, high-speed order picking and assembly applications. With a payload of 0.5 kg and a work envelope of up to 280 mm, this robot is perfect for small parts handling processes requiring high versatility in industries such as electronics, precision engineering, food, medical and pharmaceutical. Its unique delta design mechanism is ideal for fast, dexterous assembly applications. It can also easily cover an additional range of applications by simply adding another optional 500 g of payload. - Robot: M-1iA/0.5A Cjdpszzpuwofx Ak Aeri - Robot type: Delta / parallel robot - Axes: 6 - Standard payload: 0.5 kg - Optional payload: up to 1 kg - Reach: 280 mm - Repeatability: ±0.02 mm - Weight: FANUC lists the mechanical unit itself at around 17 kg in some documentation. - Mounting: floor, ceiling/inverted or angled - Protection: IP20 - Typical controller: R-30iB Plus / R-30iB Mate Plus depending on configuration.

Condition: excellent (used), Year of construction: 2021, operating hours: 260 h, functionality: fully functional, machine/vehicle number: 1028586, overall weight: 55 kg, load capacity: 10 kg, arm reach: 1,100 mm, input voltage: 230 V, input current: 16 A, type of input current: AC, KUKA KR 10 R1100-2 Industrial Robot – 2021 – 260 Operating Hours KUKA KR 10 R1100-2, 6-axis industrial robot, manufactured in 2021, with a total of 260 operating hours. The robot was previously used in the audiovisual and film production industry, primarily for robotic camera applications on film sets. It is equipped with a KUKA KRC5 controller, KUKA smartPAD teach pendant, and the following KUKA software packages: KUKA.ready2_animate, KUKA.RobotSensorInterface (RSI), and KUKA.GripperSpotTech 5.0, installed on the controller. Technical Specifications * Manufacturer: KUKA * Model: KR 10 R1100-2 * Year of manufacture: 2021 * Number of axes: 6 * Rated payload: 10 kg * Maximum reach: 1,101 mm * Pose repeatability: ± 0.02 mm (ISO 9283) * Robot weight: 55 kg * Controller: KUKA KRC5 * Teach pendant: KUKA smartPAD * Total operating hours: 260 hours Installed Software KUKA.ready2_animate Software for programming and executing complex robotic movements, with support for animation and motion control applications. KUKA.RobotSensorInterface (RSI) Interface for real-time communication with external sensors and systems, allowing dynamic trajectory adjustments based on incoming data. KUKA.GripperSpotTech 5.0 Technology package for gripper control and monitoring, including configuration and programming of gripper functions. Applications The robot was used in the audiovisual and film production industry for robotic camera operations. Suitable for: * Robotic camera systems for film and advertising production. * Motion control and robotic animation. * Precise and repeatable programmed movements. * Synchronisation of robotic movements with audiovisual sequences. * Handling and positioning. * Gripper-based applications. * Industrial automation. General Condition The robot is in excellent overall condition, with a total of 260 operating hours. No collisions, impacts or particular incidents have occurred. A few superficial marks may be visible on the paintwork. These are due to the application and removal of gaffer tape used during film shoots for audiovisual production purposes. These marks are purely cosmetic and do not affect the mechanical integrity or operation of the robot. Included Equipment * KUKA KR 10 R1100-2 industrial robot. * KUKA KRC5 controller. * KUKA smartPAD teach pendant. * Connection cables. * KUKA.ready2_animate software. * KUKA.RobotSensorInterface (RSI) software. * KUKA.GripperSpotTech 5.0 software installed on the KUKA KRC5 controller. Inspection and Transportation Csdpfx Ao Ahgr Ejk Aori The robot can be inspected and demonstrated in operation by appointment in Paris. Collection on site. Delivery can also be arranged, with terms and conditions to be agreed with the buyer.

Condition: used, Year of construction: 2017, operating hours: 1,000 h, functionality: fully functional, overall weight: 150 kg, load capacity: 10 kg, arm reach: 1,420 mm, controller manufacturer: Kuka, controller model: KR C4 smallsize-2, teach pendant manufacturer: Kuka, teach pendant model: Smart pad, input voltage: 400 V, input current: 5 A, type of input current: three-phase, KUKA KR 10 R1420 HP industrial robot with KR C4 smallsize-2 controller and smartPAD, with fewer than 1,000 operating hours, manufactured in 2017. This is a complete, working 6-axis robot package with very low operating hours. It was used in a handling cell and is ready for inspection and a demonstration under power. Robot arm: KUKA KR 10 R1420 HP Article no. 10026273, serial no. 423090 Year of manufacture: 04/2017 Operating hours: < 1000 Axes: 6 Rated payload: 10 kg Maximum reach: 1,420 mm Pose repeatability: ±0.04 mm Arm weight: 160 kg Mounting: floor, ceiling, wall, or angled HP variant (High Protection): the version with a higher protection rating than the standard IP54 arm, typically IP65 for the robot and IP67 for the wrist Axis ranges: A1 ±170°, A2 −185°/+65°, A3 −137°/+163°, A4 ±185°, A5 ±120°, A6 ±350° Axis speeds: A1 220°/s, A2 210°/s, A3 270°/s, A4 381°/s, A5 311°/s, A6 492°/s Ambient operating temperature: 5–45 °C Controller: KUKA KR C4 smallsize-2 Article no. 11047576, serial no. 324951 Year of manufacture: 2017 Power supply: 3 × 400 V, 50/60 Hz, 5 A full-load current, 25 A mains fuse Weight: 74 kg Scope of delivery: Cedpfx Ae Ahnktok Ajri KR 10 R1420 HP robot arm KR C4 smallsize-2 controller KUKA smartPAD teach pendant with cable Motor and data cables between robot and controller Steel floor pedestal (cylindrical) Condition: used, fully functional, low operating hours. Inspection and a test run are possible. Location: Menen, Belgium

Condition: like new (used), Year of construction: 2020, operating hours: 96 h, As good as new, reach: 850mm, payload: 5kg, repeat accuracy: 0.03mm, weight: 20.6kg. With teach panel, control box, manuals. On-site inspection is possible. Cedpfoq A S Dfjx Ak Aeri

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, X: 2500 mm Y: 1000 mm Z: 1500 mm R1: 0 - 90 ° Cedpfx Aeyybx Usk Ajri R2: 0 - 180 °

Condition: excellent (used), Year of construction: 2007, Type: Industrial robot Brand: Hyundai / Hanwha TechM Year of production: Csdjr Iy Nkopfx Ak Aori 2007 Maximum load: 200kg

Condition: excellent (used), functionality: fully functional, An old gem – anyone familiar with this device swears by it. Includes 2 devices and a box of spare parts, including circuit boards, etc. Total price for the entire package of 2 devices, including the spare parts kit: €2,600. Delivery is included! Crsdsxk Ty Nspfx Ak Aji Price for one device: €1,400.

Condition: excellent (used), Year of construction: 2014, Yaskawa Motoman MH6 – DX100 (2014) 6-Axis Industrial Robot | 6 kg Payload | Complete Robot System General Information 1. Manufacturer: Yaskawa Motoman 2. Robot Model: MH6 / MH6-B 3. Controller: Yaskawa DX100 4. Year of Manufacture: 2014 5. Number of Axes: 6 6. Maximum Payload: 6 kg 7. Condition: Used, very good technical condition 8. CE Certification: Yes Robot Specifications 1. Robot Type: YR-MH00006-B00 2. Robot Serial Number: R15052-929-5 3. Order Number: S4V842-1-1 4. Number of Controlled Axes: 6 5. Maximum Handling Capacity: 6 kg Controller Specifications 1. Controller Model: Yaskawa DX100 2. Controller Type: ERDS-MH00006-E02 3. Controller Serial Number: 141053 4. Manufacturing Date: 30 June 2014 5. Power Supply: 3-phase, 400 / 415 / 440 V 6. Frequency: 50 / 60 Hz 7. Rated Power Consumption: 1.5 kVA 8. Rated Current: 4.3 A Included Equipment The robot is supplied as a complete system, including: 1. Yaskawa Motoman MH6 6-axis robotic arm 2. Yaskawa DX100 control cabinet 3. Original teach pendant Crodpfxs Ah Dg Se Ak Aei 4. Robot connecting cables Condition & Maintenance The robot is in very good technical condition and has been regularly maintained. 1. Last documented backup battery replacement: November 2023 2. Complete robot system with controller and accessories 3. Suitable for integration into automated production lines Typical Applications 1. Machine loading and unloading 2. Injection moulding machine automation 3. Pick-and-place operations 4. Assembly and component handling 5. Gluing and dispensing applications 6. Light-duty welding applications (with suitable equipment) Additional Information The Yaskawa Motoman MH6 is a compact, versatile 6-axis industrial robot designed for precise and reliable automation. Its 6 kg payload capacity makes it suitable for handling small components, machine tending and various industrial automation tasks. Availability: On request Price: On request Further information and photos available upon request.

Condition: ready for operation (used), Year of construction: 2006, X: 2500 mm Y: 1000 mm Z: 1500 mm R1: 0 - 90 ° Cedpfsyyby Sex Ak Aori R2: 0 - 180 °

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: CA2451010, overall weight: 33 kg, load capacity: 12 kg, arm reach: 1,300 mm, pivoting range: 360 °, controller manufacturer: Techman Robot, controller model: Control box AC TM12X (100-240 VAC), teach pendant manufacturer: Techman Robot, teach pendant model: TM Screen modèle TP01, input voltage: 230 V, type of input current: DC, warranty duration: 4 months, Equipment: documentation/manual, TECHMAN ROBOT collaborative robot, model TM12S-MX (S series) – NEW, in original packaging, never used. Under warranty until [date]. Lot contents: - One TM12S-MX robotic arm, manufacturer reference 9TMABM130-01-004-A000-140300000, serial number CA2451010 - One TM12S-MX control cabinet, manufacturer reference 9TMABM130-01-004-A000-140300000, serial number CC2451010 - One TM Screen control panel, model TP01, manufacturer reference 9TM0B0000-04-019-A00Z0, serial number TP2435019 - One additional power supply MX version: control cabinet powered by direct current (24–60 VDC) – suitable for mobile robots (AMR) and embedded applications; no integrated AI camera on the wrist (option to add external cameras: up to 2 GigE 2D cameras, or 1 GigE 2D camera + 1 3D camera). Technical specifications (manufacturer's datasheet, S series): - Payload: 12 kg - Reach: 1300 mm - Arm weight: 33 kg - 6 rotary axes – J1, J2, J4, J5, J6: ±360°; J3: ±162° - Joint speeds: J1, J2: 130°/s; J3: 210°/s; J4, J5: 225°/s; J6: 450°/s - Max. speed: 4.5 m/s - Repeatability: ±0.03 mm - DC control cabinet: 8.9 kg - Cabinet I/O: 16 digital inputs / 16 digital outputs, 2 analog inputs / 2 analog outputs - Tool I/O: 3 digital inputs / 3 digital outputs (DO_0/AI, DO_1/RS485-, DO_2/RS485+) - I/O power supply: 24 V 2.0 A (cabinet), 24 V 1.5 A (tool) - Arm protection rating: IP65 - Typical power consumption: 400 W - Power supply: 24–60 VDC - Operating temperature: 0–50 °C - Cleanroom: ISO Class 3 - Interfaces: 2× COM, 1× HDMI, 3× LAN, 2× USB 2.0, 4× USB 3.0 - Communication: RS-232/RS-422/RS-485, Ethernet, Modbus TCP/RTU (master & slave); optional PROFINET, EtherNet/IP, EtherCAT, CC-Link - Programming: TMflow (flowchart), TMscript (script), TMcraft (developer); manual guidance teaching Csdpfsz Hz Haox Ak Aeri - Certifications: TÜV ISO 13849-1, ISO 10218-1, ISO/TS 15066; SGS UL1740, CAN/CSA Z424-14 (R2019); CE, NSF/ANSI 169 (optional), SEMI S2 (optional) Applications: pick & place, machine loading, light palletizing, assembly, integration on AMRs. Optional training: Gessmann can provide training on how to use the robot for an additional €2,800. Visit and pick-up by appointment.

Condition: used, Year of construction: 2003, Reis Robotics S1M530-1-5 (2003) Industrial manipulator / robot manufactured by Germany's Reis Robotics. Suitable for production process automation, part removal/insertion (e.g., injection moulding machinery), and general material handling. 1. Manufacturer: Reis Robotics (Germany) 2. Type / Order No.: S1M530-1-5 3. Year of Manufacture: 2003 Crodps Ah Di Hefx Ak Aoi 4. Com. No.: 50061 5. ID No.: . Condition: Used, original nameplate intact

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Year of production: 2014 Crjder Aka Aopfx Ak Aji Lifting capacity: 20kg Reach: 1726mm

Condition: used, STÄUBLI SCARA industrial robot with CS9 controller TS2-40 4-axis SCARA robot for highly precise pick & place, assembly, and automation tasks For sale is a used SCARA industrial robot from the manufacturer Stäubli, including a CS9 controller and an SP2 teach pendant. The robot system is ideally suited for fast pick & place applications, assembly, packaging, handling, as well as laboratory and automation tasks. The complete system, including controller, teach pendant, robot connection cable, and other accessories, will be delivered as shown in the pictures. Technical data: Manufacturer: Stäubli Faverges SCA, France Model: TS2-40 Robot type: SCARA, 4 axes Year of robot manufacture: 02/2024 Year of controller manufacture: 02/2024 Controller: CS9-TS2-40 Teach pendant: SP2 Reach: 460 mm Rated payload: 2.4 kg Max. payload: 8.4 kg Robot weight: 38 kg Controller weight: 30 kg Repeatability XY: ±0.01 mm Repeatability Z: ±0.004 mm Repeatability Rz: ±0.002° Controller: Stäubli CS9-TS2-40 rack controller SP2 teach pendant VAL 3 activated PROFINET Device Ethernet interface Programmable robot controller Connections: Controller power supply: 1 × 230 VAC, 50/60 Hz Power consumption: 1700 VA Crodpfxezlry Ro Ak Aoi PROFINET Device Ethernet Digital input/output Pneumatic connections on the robot Equipment: Stäubli TS2-40 SCARA robot CS9-TS2-40 controller SP2 teach pendant Original robot connection cable End-of-arm tooling mounting installed VAL 3 programming system Accessories as shown in the pictures Application areas: Pick & Place Assembly automation Electronics manufacturing Laboratory automation Packaging automation Machine loading Quality assurance Industry 4.0 applications Scope of delivery: Stäubli TS2-40 SCARA robot CS9-TS2-40 controller SP2 teach pendant Original robot connection cable End-of-arm tooling Accessories as shown in the pictures Condition: Used Year of manufacture 2024. Optical condition as shown in the pictures. System start and information menus tested. Robot system including controller and teach pendant. The table or any other items not explicitly mentioned in the photos are not included in the sale. Shipping via freight forwarder is possible. Subject to changes, errors, and prior sale. We will be happy to answer any further questions by telephone or email.