Used Holzher Contrigo for sale (174)

Condition: reconditioned (used), Year of construction: 2001, machine/vehicle number: 558/0-112, functionality: fully functional, Weight approx. 1950 kg Control panel 1888 Pre-milling unit 1961 Edge feeder 1901 Sensing nozzle Printing unit 1913 MOT Cutting unit 1918 Milling unit 1942, top Milling unit 1942, top/bottom for rounding Pull blade 1929 Contour milling unit 1983 Surface pull blade 1964 Smoothing unit 1944 Length approx. 5900 mm Connected load 21.4 A Dcsdpfoh Uyg Esx Ad Nok

Year of construction: 1995, condition: not inspected (used), Connected load 380V 55A PMS control Pre-milling unit 1961 Magazine 1901 Glue station 1906 Printing unit 1926K Snipping unit 1916 Flush trimming unit 1962 Profile trimming unit 1966, 3 mm rounding up to 15 mm flush Rounding scraper 1927 Dcodpfx Asnxkm Esd Nek Shaping trimming unit 1983 Buffing unit 1941 Extraction 1x160 1x125 mm Compressed air connection 6 bar

Condition: reconditioned (used), Year of construction: 1993, machine/vehicle number: 869/9-302, functionality: fully functional, Rated power: 380V, 21A Edge magazine Gluing station 1906 Printing unit 1914 Dedpjiamufjfx Ad Nock Cross-cutting saw unit 1976 Routing unit for rounding 1943 Rounding cutter blade 1927 Sanding unit 1944 Control panel (located) on top Dust extraction nozzle, D = 100 mm Operating manual No quick-change unit for flush trimming

Condition: not inspected (used), Year of construction: 1991, Power connection 400V / 11kW Dust extraction connection Ø 1x100 mm Compressed air connection 6 bar Weight approx. 980 kg Width min/max 760 / 1605 mm, length 4425 mm, height 1720 mm Workpiece thickness min. 6 mm, max. 45 mm Workpiece length min. 180 mm Workpiece width min. 60 mm Dcedpsiw D Udofx Ad Nek Feed rate 13 m/min Edge thickness max. 5 mm, strip material 3 mm Edge magazine 1301 with DAZ 11 Gluing station 1906 Pressure unit 1914 Cutting unit 1976 Flush trimming unit 1942 Radius R2 trimming unit 1943 Scraper blade 1927 Smoothing unit 1944

Condition: reconditioned (used), Year of construction: 2001, machine/vehicle number: 315/0-110, functionality: fully functional, Control panel, top Edge feeder 1902 Glue application station 1906 Cutting unit 1902 Printing unit 1816 Dcsdsh Ux Suepfx Ad Nsk Cutting assembly 1918 Milling assembly 1942M Rounding draw knife 1929 Form milling assembly 1983 Surface draw knife 1964 Smoothing assembly 1940 Weight approx. 970 kg Compressed air connection, 6 bar Extraction connection, Ø 120 mm Length approx. 5300 mm

Condition: not inspected (used), Year of construction: 2006, for coil and strip material from 0.4 - 15 mm Dsdpjy Ici Rofx Ad Njck max. panel thickness 60 mm max. edge overhang 66 mm large magazine table, D = 820 mm transport chain with automatic lubrication idler roller for shortest workpiece sequence safety/soundproof hoods central dust extraction connection, D = 160 mm, edge trimming units, D = 120 mm chip collection box, D = 100 mm equipped with: > Edge trimming units 1961 incl. DIA cutter > Memory-programmable screen control Edgecontrol > Automatic edge magazine 1901 for coil and strip material > Gluing station 1905 for cartridges + granules incl. sensing nozzle > Pressing unit 1926, motor-driven/pneumatic > Cutting unit 1819, motor-driven > Flush trimming unit 1962 > Multi-function trimming unit 1966 with various radii/chamfers > Multi-radius draw blade unit 1965 with various radii > Corner copying unit 1983, R = 2 mm incl. one interchangeable motor, R = 1 mm > Straight draw blade 1964, controlled by program > Deburring unit 1944, controlled by immersion > Spray device 1856 at the infeed and outfeed > Belt bridge > stepless feed rate up to 24 m/min > Shear arm > motor-driven bridge adjustment > infeed guide rail, motor-driven adjustable Length 8200 mm Width 1300 mm Height 2000 mm Weight 3300 kg

Condition: reconditioned (used), Year of construction: 1987, machine/vehicle number: 1277/8-71, functionality: fully functional, Connected load: 380V, 7A Cutting length: 4300 mm Cutting height: 1925 mm Frame height: 2210 mm Machine height: 2500 mm Room height: 2540 mm Djdeh U Sqrjpfx Ad Nsck Edge trimming height: 1870 mm Passage height: 1940 mm

Condition: used, Year of construction: 2001, machine/vehicle number: 500 / 0-106, functionality: fully functional, electric edge trimmer Dedpfx Adezi Iipj Nsck 2 edge banding machines with diamond-tipped cutters at the input edge banding using interchangeable adhesive reinforced cutter for ABS edging edge banding units with electric and digital adjustment end trimming top and bottom flush trimming finish trimming and rounding available space cleaning brushes

Condition: used, Year of construction: 2011, total height: 1,730 mm, total length: 6,100 mm, total width: 1,440 mm, Colour: Grey Weight: 2.500 kg - Year: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 5/1-107 - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes Dcodpfx Asyf Dakjd Nok - └ 5th unit type: - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Tools available: Yes - └ 7th unit type: Radius scraping unit - - Tools available: Yes - └ 8th unit type: - - Tools available: Yes - └ 9th unit type: Flat scraping unit - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 21.9 - Fuse [A]: 50 - Transport dimensions: 6100mm x 1440mm x 1730mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2010, functionality: fully functional, Used Holz-Her Cut 6120 - Year of manufacture: 2010 - Availability: End of September 2026 Dsdpfx Aeziwqped Nsck - Automatic cutting height adjustment - Scoring unit - Saw blade projection: 82 mm - Label printer - Cutting length: 4400 mm - Electronically controlled pressure beam and saw carriage for short cycles - Grooving program / motor-adjustable

Condition: excellent (used), Cutting height: 210 cm Cutting length: 500 cm Cutting depth: 60 mm Engine: 4 kW Overall dimensions: Length 600 cm, Height 300 cm, Width 160 cm Djdozi Dm Rjpfx Ad Njck

Condition: new, Year of construction: 2026, functionality: fully functional, cutting width (max.): 3,100 mm, saw blade diameter: 300 mm, section length (max.): 3,100 mm, Equipment: CE marking, scorer, HOLZ-HER Pressure Beam Saw LINEA 6015 Cutting length 3100 mm x cutting width 3100 mm Saw blade projection 68 mm Grooves up to 25 mm (bi-directional) 7.5 kW main saw motor 2.2 kW scoring saw motor Dcsdpfxoyngt Se Ad Nek 3 air-cushion tables 1800 mm with feed rollers Cut-out & recess device (for window cut-outs and insertion grooves) Side pressure, program-controlled Eco mode Handheld control device Label printer and software Easy-Plan optimization (upgrade and office version available) and much more... 12-month warranty Delivery, installation, and operator training of the machine can be arranged directly through us for an additional charge. The machine is currently located at our distribution warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign-language version, only the German version is legally binding. Our General Terms and Conditions can be found on our website at holzher.de/en/terms-and-conditions.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Working range X: 6000 mm Working range Y: 1400 mm 4-axis electro-spindle, power 16 kW Fixedly installed saw blade Fixedly installed clamping unit Dsdpfxjy Um Nzs Ad Njck Vertical drilling bits: 18 Horizontal drilling bits X: 6 Horizontal drilling bits Y: 2 Pick-up tool changer, 1 position Linear tool changer, 16 positions Linear tool changer, 6 positions Circular tool changer, 18 positions Worktable with 10 rails WS10 "MultiClamp" frame clamping device Software: Campus Manual control panel for remote operation 250 m3/h vacuum pump Safety mats Includes 2 aggregate heads (1 Vario NC and 1 with 4 horizontal outlets) and suction cups Only 943 operating hours Available February 2027

Condition: good (used), Year of construction: 2002, functionality: fully functional, Edgebander HOLZHER, type 1310, equipped with: cartridge glue station, flush end trimming, two multi-milling units, profile scraper, buffing units, condition good Dcodjx H Sutspfx Ad Nok

Condition: excellent (used), Preliminary milling cutters Gluing unit for cartridges Guillotine Edge trimming cutter (front and rear) Straight milling cutters Angle milling cutters Rounding profiling cutter Corner rounding Dcodezik R Aopfx Ad Nok Straight profiling cutter Dadoing saw Polishing machine Year 2002

Condition: good (used), Year of construction: 2000, I sell the 3-axis CNC working centre HOLZ-HER ECO-MASTER 7113 with beam table Year 2000. Configuration: 3-axis main spindle 7,5 KW Tool magazine 4 positions HSK63 1 grooving saw X-direction Drilling head 9+2 spindles Useful working area 2300 x 1000 x 130mm. 2 working fields, 4 clamping areas Dcjdott Sy Hopfx Ad Nek Automatic central system of lubrication. Holzher software controller with full instructions. Pump RIETSCHLE 2,2 KW Good condition. Available immediately.

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 101-335, functionality: fully functional, Machine available starting in early October 2026. The machine can be inspected and demonstrated at the customer's site. Workpiece thickness: 8 - 60 mm Workpiece length: min. 160 mm Feed rate: 10 m/min -extendable workpiece support -motor-driven pressure bridge, PLC-controlled -1888 control panel PPC 231 U+E -1801 joint milling unit incl. 2 joint milling cutters 70x64x30 -1903 edge feeder, fully automatic -GJ 301 Glue-Jet adhesive application system incl. sensing nozzle and cartridge magazine for EVA & PUR adhesive cartridges -1912-3 printing unit, pneumatic Djdpfx Aezg Upwjd Njck -1918 trimming unit with pneumatic swivel 0 -12° via PLC -1827 milling unit, motor 4, pneumatic, via PLC 1832 profile milling unit (Auriga SPS) 1929 radius scraping unit, motor 2, SPS 1964 surface scraping unit 1856 release agent application at the front, cleaning agent application at the rear, spraying 1940 wiping unit Overall length: 4930 mm Weight: approx. 1430 kg

Condition: good (used), Year of construction: 2023, functionality: fully functional, operating hours: 59,000 h, input voltage: 400 V, input frequency: 60 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 5 mm, actuation type: electric, total height: 2,000 mm, total length: 3,095 mm, total width: 1,330 mm, overall weight: 700 kg, Equipment: documentation/manual, 2023 Good condition For inquiries, please contact: Gergely Repka 06707739050 Professional edge banding machine suitable for edge sealing and post-processing of panel-format sheet materials. It can be used for particleboard, MDF, furniture board, table tops, etc. Key technical data: * Coil edge banding: 0.4–3 mm * Strip edge banding: 0.4–5 mm * Maximum edge height: 55 mm * Processable sheet thickness: 8–50 mm * Edge banding cross-section: max. 5 × 50 mm (material-dependent) * Minimum workpiece width: 70 mm * Minimum workpiece length: 180 / 210 mm * Feed speed: 9 m/min * Manually adjustable pressure beam * Extendable workpiece support with 500 mm distance Equipment: Dcodpozi Am Nofx Ad Njk * Edge Control BC15 control system with a 15.6" touchscreen * Vi.se. (Visual Setting) digital setting system for quick and accurate machine adjustment * FG101 pre-milling unit with 2 diamond milling heads * MG101 edge feeding unit * Glu Jet GJ101 hybrid adhesive technology (2.3 kW / 50 Hz) with automatic adhesive height adjustment * 1.4 kg adhesive tank (for 4 cartridges) * Glu Jet cleaning tank * Automatic refilling system * DW101 pressing unit * KA101 pneumatic end trimming unit, 1 motor version * 0.22 kW * 12,000 rpm * FR101 profile smoothing unit * chamfering and radius function * 2 × 0.37 kW * 12,000 rpm * 2 replaceable HW milling heads Ø75, Z4, R2 * FF101 corner rounding unit with dual linear guide * ZK101 scraping unit R=2.0 mm * Chip collection system * FK101 surface scraper unit * SW101 polishing unit * 2 × 0.13 kW * 1,400 rpm * 2 textile polishing discs, 120 mm * Adjustable from 0–5° * TR101 spraying unit for infeed and outfeed sides

Condition: used, Holz Her STREAMER 1057 XL FÜ + PU Edge thickness 0.4 - 6 mm Modern control system with selector switch for adjusting the units Fully automatic edge magazine for roll and strip material GLU-JET adhesive application station, cartridges + PU adhesive Adhesive application using nozzle technology Sensor-controlled nozzle Workpiece height 6-60 mm Automatic adhesive height adjustment High-quality 3-roller pressure unit, 1st roller motorized Trimming unit, pneumatically controlled for roll and strip material up to 6 mm edge thickness With pneumatic adjustment of the trimming saw angle from 0-10° Routing unit, flush trimming 6 mm, radius routing - chamfer routing - 15° Corner copying unit - 3 mm edge thickness Scraping unit for chamfers and radii with 2 scraping blade holders Surface scraping unit - finishing Buffing unit Dcsdpfx Aszcau Eed Nek Spray device in the infeed and outfeed area, as well as for PU Machine with all processing tools Machine is WORKSHOP TESTED From a craft business First delivery 2019 Available from stock in Lieboch

Condition: used, Year of construction: 2018, travel distance X-axis: 3,700 mm, travel distance Y-axis: 2,240 mm, We offer this used HOLZ-HER DYNESTIC 7535 machining center, year of construction 2018. Manufacturer: HOLZ-HER Maschinenbau GmbH Model: DYNESTIC 7535 Type: 7535 Djdpfxoyx Af He Ad Nock Serial Number: 127/1 806 Order Number: 19511222 Year of Manufacture: 2018 Series: BAZ18v3 Country of Origin: Austria Weight: If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2026, HOLZ-HER Edgebanding Machine ARTEA 1030 - NEW MACHINE Edge thickness, roll material: 0.4 – 3 mm (depending on material) Edge thickness, strip material: 0.4 – 5 mm Workpiece thickness: 8 – 50 mm Workpiece width: min. 70 mm Workpiece length: min. 180 / 210 mm Feed speed: 9 m/min. Glue application via Teflon-coated glue application roller, with glue reservoir located underneath. All common edge types, including solid wood edges up to 5 mm. Equipment: - Edge Control BC 15 control system with 15.6'' touchscreen - Vi.Se (Visual Setting Mode) - LED machine lighting - Edge trimming Dcodpfx Ajzhaw Aod Nsk - Edge feeder - LR101 glue application system - glue application roller (Teflon-coated) - Pressure unit - Trimming unit - Milling unit with r = 2 mm tools - Profile milling unit - Scraping unit - Face scraper - Buffing unit 12 months warranty Delivery time upon request. Delivery, installation, and training for the machine can be arranged directly through us for an additional charge. In the event of discrepancies between the German version and a foreign language version, only the German version shall prevail. Our general terms and conditions can be found on our website at holzher.de/de/agb.

Condition: excellent (used), Year of construction: 2005, Brand: HOLZ HER Model: SPRINT 1310 - CE Standard Automatic edge banding machine with cartridge-based glue system for processing wood, PVC, ABS, and veneer edging. Suitable for furniture, panel materials, custom manufacturing, kitchens, bathroom furniture, joineries, and much more – complies with CE standards. Technical Data: Min./Max. panel height: 6 – 45 mm Edge thickness: 0.4 – 6 mm Maximum glue pot height: 51 mm Minimum panel width: 60 mm Minimum panel length: 180 mm Feed speed: 8 m/min Compressed air: 6–7 bar Machine Features: Automatic feed for roll and strip material Cartridge glue system enables in-operation switching between EVA and PUR adhesives or changing glue color 3 pressure rollers, 1 driven End trimming unit with 2 motors, each 0.22 kW Multifunction unit with controlled axis for flush and chamfer trimming, with 2 motors at 0.6 kW each Surface scraper unit Radius scraper unit Buffing unit Soundproof hood Control: Rotatable and tiltable operator panel All units individually controllable Function display with text and graphics Aggregate pre-selection display Program list with names and numbers, self-diagnosis Approximate machine dimensions: 3900 x 1050 x 1800 mm (H) Weight: 1000 kg INCLUDES OTT Rondomat corner rounding unit Used machine information: Dcjdey Emw Hjpfx Ad Njk • Technical data subject to change and prior sale. • Prices are ex-works, loaded free of charge! • The machine has been cleaned and function tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machines at location. • Special agreements are only valid in written form. (Enquiries will only be answered with your address and telephone number!)

Condition: used, total height: 1,600 mm, total length: 1,500 mm, total width: 800 mm, overall weight: 440 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Trimming unit: yes Dsdpjy Uwq Aefx Ad Nsck Panel support guides: yes Number of edge processing units: 1 Processing unit: rough trimming on top and bottom Number of finishing motors: 1 MACHINE DETAILS Model: UF 362 / 2713 Type: Manual sanding machine EQUIPMENT Trimming unit Panel support guides

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, HOLZ-HER Edgebanding Machine ARTEA 1030 - TRADE SHOW MACHINE Edge thickness, coil material: 0.4 – 3 mm (depending on the material) Edge thickness, strip material: 0.4 – 5 mm Workpiece thickness: 8 – 50 mm Workpiece width: min. 70 mm Workpiece length: min. 180 / 210 mm Feed speed: 9 m/min. Glue application via Teflon-coated glue application roller, with glue reservoir located underneath. All common edge types, including solid wood edges up to 5 mm. Equipment: - Edge Control BC 15 control system with 15.6'' touchscreen - Vi.Se (Visual Setting Mode) - Nesting & Pneumatics Package - LED machine lighting - Joint milling - Edge feeder - LR101 gluing system - glue application roller (Teflon-coated) - Pressing unit - Trimming unit - Milling unit with r = 2 mm tools - Profile milling unit Dcodpfezg Axtex Ad Nsk - Scraping unit - Pneumatic surface scraper - Buffing unit - Spray device in the infeed and outfeed areas 12 months warranty Delivery, installation, and machine instruction can be arranged directly through us for an additional fee. The machine is currently located in our delivery warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign language version, only the German version shall prevail. Our general terms and conditions can be found on our website at holzher.de/de/agb.

Condition: new, Year of construction: 2026, functionality: fully functional, HOLZ-HER edge banding machine ARTEA 1030 - NEW MACHINE Edge thickness, roll material: 0.4 – 3 mm (depending on the material) Edge thickness, strip material: 0.4 – 5 mm Workpiece thickness: 8 – 50 mm Workpiece width: min. 70 mm Workpiece length: min. 180 / 210 mm Feed rate: 9 m/min. Glue application in PUR & EVA qualities, easily achieved thanks to the HOLZ-HER GluJet adhesive application system. All common edge types, including solid wood edges up to 5 mm. Equipment: - Edge Control BC 15 control system with 15.6'' touchscreen - Vi.Se (Visual Setting Mode) - Nesting & Pneumatics Package - LED machine lighting - Joint milling cutters - Edge feeder - GluJet GJ201 adhesive application system - Material buffer - Glue collecting container - Automatic reloading function Dodpfx Aszgu Dned Neck - Pressure unit - Trimming unit - Milling unit with r = 2 mm tools - Profile milling unit - Scraper unit - Pneumatic surface scraper - Buffing unit - Spray system in the infeed and outfeed area 12 months warranty Delivery, installation, and training for the machine can be arranged directly through us for an additional charge. The machine is currently located in our delivery warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign language version, only the German version shall prevail. Our general terms and conditions can be found on our website at holzher.de/de/agb.