Used Holzher Uno 1302 for sale (178)

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 4547, functionality: fully functional, operating hours: 5,049 h, total height: 2,550 mm, total length: 5,900 mm, total width: 1,350 mm, overall weight: 3,000 kg, plate height: 45 mm, TECHNICAL DETAILS The machine consists of 8 processing units as follows: 1. Unit: Pre-milling unit – tools available 2. Unit: Gluing unit 3. Unit: Pressure rollers – tools available 4. Unit: End trimming unit – tools available 5. Unit: Rough milling unit – tools available 6. Unit: Edge rounding unit – tools available 7. Unit: Radius profiling unit – tools available 8. Unit: Brushing unit – tools available Panel thickness min.: 6 mm Panel thickness max.: 45 mm Panel width min.: 60 mm Panel length min.: 180 mm Feed rate control: Continuously variable Gluing system: Glue pot Voltage: 400 V Power consumption: 53.31 A Fuse: 63 A Dimensions & Weight Knodszrmtfopfx Ak Aja Dimensions (L x W x H): 5,900 x 1,350 x 2,550 mm Shipping weight: 3,000 kg Note: The top and bottom stripping blades are currently not functional.

Condition: used, Year of construction: 2022, Used machine Knjdpfxsygn Ibj Ak Asa Year of manufacture: 2022 Equipment and technical data: BASE MACHINE DYNESTIC 7507 10.7_Push Processing length: 3,100 mm (without tools) Processing dimension in Y-direction: 2,200 mm CAMPUS V7 CAD/CAM Software, 1 x license incl. CabinetControl Base and material removal simulation Upgrade "CAMPUS "Better Nest" freeform nesting software" Uninterruptible power supply (UPS) Milling unit 7830, power: 10.3 kW (S6/40) Sensor package Chipcontrol for 3-axis spindle incl. receiver 7884 Drilling unit, complete, 14 spindles, drive power 3 kW Integrated saw unit for cutting/grooving in X-direction, n(max.) 1,000–7,330 rpm, infinitely variable 1 rear stop rail for the machining field (Field D) at the rear with 1 lateral stop (replaces lateral stops at the rear) Stop monitoring for 5 standard stops at the rear and right Tool changer 7873, 6-position linear pick-up, pneumatically liftable with cover for HSK holders integrated 2 additional mounts for HSK holders for tool changer 7873. Tool changer 7872, single aggregate magazine swiveling in X and Y directions 2 x vacuum pump 140 m³/h, dry-running Vacuum unit complete, (VP8) 250 m³/h, 400V additional (upgrade) Vacuum connection complete, 16-circuit vacuum VF16 LASER, alignment complete, dot laser complete, option ZB8 Lubrication complete, central lubrication on encoder side 2 x vacuum suction pads for smooth table surfaces, complete 140 x 115 mm, height 30 mm with connection hose 2 x vacuum suction pads for smooth table surfaces, complete 120 x 50 mm, height 30 mm with connection hose Conveyor belt complete, push-off conveyor belt AUT 5 10.7 push-off table Additional extraction via push-off conveyor belt Push-off device on gantry, controlled, incl. simultaneous extraction of the wear plate Label printer Direct Label 7507 and complete touch label light Option ZB74 TouchTool tool length measurement Availability: by arrangement Location: Bavaria

Condition: used, Year of construction: 2016, operating hours: 12,415 h, total height: 2,200 mm, total length: 9,050 mm, total width: 1,200 mm, Colour: White Weight: 4.800 kg Price: On request - Year: 2016 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 109/1-606 - Operating hours: 12415 - Number of units [pcs]: 11 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Type/Brand: 1914 Kjdpfx Akszhrlfj Aona - - Tools available: Yes - └ 4th unit type: Cap unit - - Type/Brand: KA701 - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Type/Brand: 1828 - - Tools available: Yes - └ 6th unit type: Fine milling unit - - Type/Brand: FR701 - - Tools available: Yes - └ 7th unit type: Corner rounding unit - - Type/Brand: FF701 - - Tools available: Yes - └ 8th unit type: Radius scraping unit - - Type/Brand: ZK501 - - Tools available: Yes - └ 9th unit type: Flat scraping unit - - Type/Brand: 1856 - - Tools available: Yes - └ 10th unit type: Brushing unit - - Type/Brand: ES701 - - Tools available: Yes - Min. edge band thickness [mm]: 3 - Max. edge band thickness [mm]: 20 - Min. panel thickness [mm]: 8 - Max. panel thickness [mm]: 60 - Max. panel width [mm]: 65 - Min. panel length [mm]: 180 - Max. panel length [mm]: 250 - Min. feed speed [m/min]: 10 - Max. feed speed [m/min]: 25 - Feed speed control: Continuously adjustable - Glue system: Glue pot - Options: Return transport - Voltage [V]: 400 - Current consumption [A]: 45 - Transport dimensions: 9050mm x 1200mm x 2200mm (l x w x h) - Transport weight [kg]: 4800kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 1991, condition: used, Prescoring system: Super Cut, max. cutting height: approx. 2200mm, max. cutting length: approx. 5300mm, max. cutting depth: approx. 50mm, saw blade diameter: approx. 220mm, motor power: approx. 3kW, max. feed speed: 22m/min. An on-site inspection is possible. Loading on site is possible. Knedpfxozvv Iyo Ak Aoa

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 101-335, functionality: fully functional, Machine available starting in early October 2026. The machine can be inspected and demonstrated at the customer's site. Workpiece thickness: 8 - 60 mm Workpiece length: min. 160 mm Feed rate: 10 m/min -extendable workpiece support -motor-driven pressure bridge, PLC-controlled -1888 control panel PPC 231 U+E -1801 joint milling unit incl. 2 joint milling cutters 70x64x30 -1903 edge feeder, fully automatic -GJ 301 Glue-Jet adhesive application system incl. sensing nozzle and cartridge magazine for EVA & PUR adhesive cartridges -1912-3 printing unit, pneumatic -1918 trimming unit with pneumatic swivel 0 -12° via PLC Ksdpfxjzg Upwe Ak Ajna -1827 milling unit, motor 4, pneumatic, via PLC 1832 profile milling unit (Auriga SPS) 1929 radius scraping unit, motor 2, SPS 1964 surface scraping unit 1856 release agent application at the front, cleaning agent application at the rear, spraying 1940 wiping unit Overall length: 4930 mm Weight: approx. 1430 kg

Condition: new, HOLZ-HER 7405 EVOLUTION CONNECT machining center -Exhibition machine- This offer includes an equipment package. The following items and options are already included in the price: - Material support - Height-adjustable infeed roller conveyor - Diamond edge trimming cutter set EVOLUTION - CAMPUS V8 EVOLUTION CAD/CAM software - Flat screen monitor, 21.5", 16:9 - Laser workpiece length measurement Kedpozq Dbdefx Ak Aona - Milling head 7830 - Tool changer 7887, 6-position magazine, pick-up - Vacuum system ECO - Air conditioning unit for control cabinet cooling - Tool changer 7874 - Angular gearbox 7869 - Adapter for Clamex cutter - Tool set - 4-axis CLAMEX - Tool holder HSK-F 63 - Drilling unit XL 7885, 19 spindles - Handheld control unit - Tool set - EVOLUTION for XL drilling head 7885 - New exhibition machine -

Condition: used, Year of construction: 2017, HOLZ-HER Edgebanding Machine LUMINA 1380 Used machine Year of manufacture: 2017 Condition: Well-maintained Motorized pressure beam adjustment Edge thickness, roll material: 0.4 - 3 mm Edge thickness, strip material: max. 3 mm with unit FF701 max. 8 mm without unit FF701 max. 15 mm with tool change on the multi-function milling unit Edge height: max. 65 mm Workpiece thickness: 8 - 60 mm Workpiece width: min. 60 mm Workpiece length: min. 160 mm Feed speed: continuously variable, 10 - 18 m/min Control system Edge Control 19 with 18.5" touchscreen color display 16:9 ECO MODE energy-saving mode Infeed fence, 1350 mm long Motorized adjustment of infeed fence Joint milling unit 1802, edge feed MG701 SYNCHRO Glue application station Glu Jet GJ302 automatic (refurbished in 2026) Including changeover trolley Including quick-change couplings Including HSK mounting for the unit Including automatic unit detection GLU JET collection container Pressing unit 1913 MOT Cutting unit 1918 (60 mm) pneumatic Knodpozpzy Usfx Ak Aoa (2 x 0.45 kW, 12000 min-1) pneumatically pivoting 0/10° Milling unit FR701 6 fully digital NC servo axes. Profile milling unit FF701 4 fully digital NC servo axes. Scraper unit 1929 MOT4 incl. high-gloss kit Surface scraper FK701 Spraying system 1856 for the infeed and outfeed area Spraying system (release agent) after the pressing unit Automatic chain lubrication Adaptive pressure and glue quantity control Location: Bavaria Availability: approx. August 2026

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Condition: Good (the machine has undergone extensive maintenance every year, most recently in March 2026!) Equipment: - iTronic – Adaptive pressure and glue quantity control with automatic, program-dependent fine adjustment - MOT SPS adjustable infeed fence - Automatic chain lubrication: Intelligent automatic transport chain lubrication Knsdpfx Aezpzy Isk Asa - Edge Control 19 control system - EL GRM variable, 400V 50Hz, 2.2kW V2 SPRINT 1329 PERFORMANCE 400V 50Hz - Edge Control 19 control system with 18.5" touchscreen color display, 16:9 format - ECO MODE energy-saving mode: An automatic standby circuit - Jointing unit 1802 (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for jointing panel edges - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Edge feed 1901 SYNCHRO: automatic transport of coil and strip material - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) - DW501 SPS motorized SPRINT - GM501 spray device after the printing unit with lubricant (recommended for high-gloss edges) - End trimming unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm) pneumatically tiltable 0/10° - Milling unit FR701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Air Stream System multi-cutter, diamond Ø 70.9 x 16 mm, Z = 2+2 - Form milling unit FF701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, left-hand rotation with CM technology - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, right-hand rotation with CM technology - Scraper unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the tracing rollers - HW reversible knives for scraper holder, R = 2.0 mm (2 pcs. required) - Flat scraper FK701 with pre- and post-sensing for removing adhesive residue - TR501 spray unit for infeed and outfeed (separating and cleaning agent) - Includes nesting shoes below with their own spray unit Location: Hesse Availability: Approx. July 2026

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Kedpfx Aksvvkfds Asna

Condition: used, Year of construction: 2002, Machining dimensions (tool diameter 25mm): X=3015 mm Y=1483 mm Z=325 mm Max. travels: X=3268 mm Y=1483 mm Z=325 mm Max. programming speed: X/Y = 75 m/min / Z = 30m/min Tool holder HSK 63F Drilling unit 7964, 14 vertical drilling spindles with 32 mm grid (10 in x / 4 in y) Sawing unit 7946 3.6 kW, 90° pneumatically pivotable Milling unit 7933 9 kW Wood Her Vector axis (C-axis) Tool magazine (6 disk places) Hand control unit Laser device (positioning of the suction cups) PC control panel with 17" monitor Operating system Windows 2000 Software: TwinCAM32 - office version Vacuum pump 100 m³/h Dry running Selective safety mats (3-field division) Kedpfx Asvvi Nbok Asna Storage location: Nattheim

Condition: used, Storage location: Nattheim Knjdpfx Akevvkrds Aja

Condition: used, Year of construction: 2009, Automatic central lubrication Milling unit 7833 2-stage, 11 kW power 1000 - 24000 rpm 1 double drilling spindle in X-direction 1 integrated sawing unit for sawing / grooving in X-direction, traveling Tool changer 7892, 16-way Linear Pick-up changer, permanently installed on the right-hand side of the machine Laser pointer consisting of 2 laser pointers for positioning the vacuum suction cups or tracing the workpiece contour Automatic console - suction cup positioning 6 consoles including 3 suction cup holders per console including 1 vacuum suction cup 80x80 mm per suction cup holder including 4 feeding aids Additional processing fields at the front for 6 consoles Basic unit pneumatics for frame clamping system 7974 (6 consoles) 2D barcode scanner Video camera in the processing head Vacuum pump 140 m³/h Vario tool Change changing unit package consisting of Consists of: Vector axis 7899 (C-axis), fully interpolating, 0-360° continuously rotatable, including pneumatic tool changer 7890, single-slot magazine pick-up system, permanently installed in front of the machine frame on the left. Tool changer 7894, 6-slot pick-up magazine specifically for Vario Tool Change tool holders, permanently installed in the machine frame on the left, can be equipped with a Vario Grip KSJ F 40 collet chuck, 3 Vario Grip KSJ F 40 tool holders (for 2-20 mm ER32 collets), 1 saw blade holder, 3 collets according to customer selection, 1 carbide circular saw blade, max. 220 mm diameter. Storage location: Nattheim Knsdpfx Akevvi Sps Aea

Year of construction: 2006, condition: ready for operation (used), Glue type: PUR glue, glue application system: cartridges, max. edge thickness: 25mm, max. workpiece thickness: 60mm, feed rate: 16m/min, min. workpiece length: 140mm, min. workpiece width: 60mm. Including various spare parts and Ligmatec return. Documentation available. On-site inspection is possible. Ksdpfx Akeugmw Ee Ajna

Condition: used, Year of construction: 1992, functionality: fully functional, HOLZ-HER Type 1370 wide-belt sanding machine / fine sanding machine, manufactured in 1992. The machine was last used and is described as being in working order and having been inspected. Technical data: - Working width: maximum 1,100 mm - Workpiece passage height: 2–100 mm - Sanding unit: 15 kW - Brush: 0.55 kW - Feed: 1.1 kW - Total power: approx. 17 kW Kedpfx Akezrn Abs Ajna - Connection: 380–400 V / 50 Hz - Dimensions: approx. 1,730 x 1,340 x 1,380 mm - Space requirement, depth including roller tables: approx. 2,500 mm - Weight: approx. 1,935 kg, plus roller table approx. 80 kg - Dust extraction connection: 250 mm Accessories: roller tables, sanding belts, tools, operating manuals, wiring diagram, and spare parts documentation. Important note: The rubber transport rollers have hardened due to age and should be replaced as soon as possible. Location: 65618 Selters (Taunus), Germany.

Condition: excellent (used), Pre-cutter, adhesive unit for cartridges, guillotine, crosscut saw (front and rear), straight-line cutter, angle cutter, rounding scraper, corner scraper, cut-off saw, polishing machine, year of manufacture 2002. Knsdozik R Ajpfx Ak Asa

Condition: used, Holz Her Sprint 1329 Black Edition Heavy-duty version - edge thickness 0.4 - 8 mm (15 mm with tool change) 18.5" touchscreen control, Power-PC color display Motorized, position-controlled bridge height adjustment Pre-milling unit for attachment before the gluing station Automatic infeed guide rail 1350 mm MOT Edge magazine, fully automatic for coil and strip material MOT Glue application station GLU-JET cartridges - hot melt and PU gluing, thin-film technology Edge height max. 60 mm Glue height adjustment / sensor nozzle High-gloss package Pressing unit 1913 mot., motorized-pneumatic NC servo axis Cutting unit for coil and strip material up to 15 mm edge thickness with electro-pneumatic adjustment of 0-10° bevel of the cutting saw Multi-function milling unit MOT 6 - NC control axes: Flush trimming 8 mm (15 mm) Radius milling Chamfer milling 0 - 15° Copy milling unit MOT 4, corner copying, postforming corners with 4 NC control axes, for milling the upper and lower longitudinal edge and copy milling the front and rear end edges, vertical edge, working height 60 mm Scraping blade unit MOT4 Surface scraping blade unit – finishing Buffing unit for final polishing and edge polishing with 2 textile discs Spray system for infeed and outfeed areas as well as antistatic agent at the pressing unit Infeed area: electronically controlled release agent spray device Kjdpfx Akozdzlme Ajna Pressing unit: electronically controlled antistatic spray device Outfeed area: electronically controlled cleaning agent spray device with cleaning agent First delivery 2018 / from lease return Machine is WORKSHOP OVERHAULED in TOP CONDITION Available from stock, Lieboch

Condition: used, Holz Her Sprint 1321, with edge banding and PU adhesive application Heavy-duty version – edge thickness 0.4 – 15 mm SPS-based Edgecontrol control panel Motorized, position-controlled bridge height adjustment Pre-milling unit for attachment before the gluing station Fully automatic edge magazine for roll and strip material Gluing unit with cartridge system + PU adhesive application Automatic glue height adjustment / touch probe nozzle Pressure unit 1913, pneumatic Kjdpfxozp Hc Ue Ak Aena Trimming unit for roll and strip material 1918 – 15 mm With pneumatic adjustment for trimming saw angle from 0-10° Multi-function milling unit with motorized adjustment: flush trimming – 15 mm, radius and chamfer milling – 15° Profile milling unit – corner rounding 1833 Scraping unit for chamfers and radii 1929, pneumatic Pneumatic infeed and outfeed Surface scraping unit – finishing, pneumatic Buffing unit for finishing and edge polishing with 2 textile discs HIGH-END spraying system Complete set of tooling Machine is in FULLY OPERATIONAL CONDITION Machine from a craft business / consignment sale Available from stock in Lieboch, NET € 21,500.00

Condition: good (used), Year of construction: 2002, 0,4-3 mm Workingpiece thickness from to 6-45 mm Kedpjzmy N Nsfx Ak Ajna Total length 3700 mm Feed speed 8 m/min. Weight 900 kg

Condition: good (used), Year of construction: 1982, Cutting length 4.300 mm Kodpfjygm Tiex Ak Aena Cutting height 1.800 mm machine weight ab. ca. 600 kg kg

Condition: used, Year of construction: 2002, total length: 5,050 mm, total width: 2,420 mm, total height: 800 mm, Colour: Grey Weight: 750 kg - Details: - └ Description: Digital readout does not function. - Year: 2002 - Documentation available: No - CE certificate present: No - Serial number: 221 / 0-206 - Max. cutting height vertical [mm]: 1950 - Max. cutting height horizontal [mm]: 1900 - Max. cutting width [mm]: 3300 Knsdpfx Akezcng Nj Asa - Max. cutting depth [mm]: 50 - Max. saw blade diameter [mm]: 300 - Arbor saw blade diameter [mm]: 30 - Horizontal cutting: Yes - Vertical cutting: Yes - Voltage [V]: 400 - Fuse [A]: 16 - Transport dimensions: 5050mm x 2420mm x 800mm (l x w x h) - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2010, total height: 2,580 mm, total length: 5,500 mm, total width: 1,500 mm, Weight: 1.500 kg Price: On request - Year: 2010 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 161/1-10 - Number of units [pcs]: 7 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Tools available: Yes - └ 7th unit type: Flat scraping unit - - Tools available: Yes Knjdpfx Aoyu Tkkek Aoa - Voltage [V]: 400 - Current consumption [A]: 38.85 - Fuse [A]: 50 - Transport dimensions: 5500mm x 1500mm x 2580mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, machine/vehicle number: 008018, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Knedpfx Akswv Dfcs Asa Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, Holz Her Auriga 1308 XL Black Edition compact design – edge thickness 0.4 – 8 mm SPS screen control Edge-Control, PPC 319W, 18.5" touchscreen monitor Pre-milling unit for attaching before the gluing section Edge magazine fully automatic for coil and strip material Glue application station GLU JET cartridges + PU gluing Fully automatic operation of the units via NC servo axes Workpiece height 6-60 mm Automatic glue height adjustment High-gloss package Pressure unit pneumatically controlled Cutting unit pneumatically controlled for coil and strip material up to 8 mm edge thickness with pneumatic adjustment of the cutting saw angle from 0-10° Milling unit MOT4, flush milling 8 mm, radius milling - chamfer milling via NC axes Shaping milling unit – rounding of edges up to edge thickness 3mm in a single pass via NC axes Scraping blade unit MOT for chamfers and radii with 2 scraping blade holders via NC axes Surface scraping blade unit – finishing Buffing unit – polishing Spray system in the infeed and outfeed area complete DIA tool set included First delivery in 2018 Machine in TOP CONDITION from a lease return Kedpfxjznunce Ak Asna available from stock in Lieboch

Condition: used, Holz Her Auriga 1308 XL POWER Compact design - edge thickness 0.4 - 8 mm Motorized bridge adjustment PLC screen control Edge-Control, PPC 319W, 18.5" touchscreen monitor iTronic adaptive pressure and adhesive quantity control, and flushing routine fa.s.t. setting technology "Tool change in position" Long infeed guide with motorized adjustment Pre-milling unit for application before the gluing section Fully automatic edge magazine for coil and strip material Glue application station GLU JET cartridges + PU adhesive, with sensing nozzle Workpiece height 8-60 mm High-gloss package Pressure unit, pneumatically controlled Trimming unit, pneumatically controlled for coil and strip material up to 8 mm edge thickness with pneumatic adjustment of 0-10° bevel of the trimming saw Multi-function milling unit FR301 MOT6, flush trimming 8 mm, radius milling – chamfer milling 15° via NC axes Ksdpfjznucyox Ak Asna Profile milling unit FF301 MOT1 – rounding of corners up to edge thickness 3 mm or alternatively chamfer = 45°, working height 12 – 60 mm, postforming possible Scraping unit ZK301 MOT4, for chamfers and radii with 2 scraping blade carriers via NC axes Surface scraping unit FK701 with pre- and post-sensing - finishing Buffing unit - polishing Spray system in the infeed and outfeed area Spray system with lubricant for high-gloss edges Complete DIA tool set included First delivery 2022 Machine in TOP condition, taken out of service - small business Available from stock, Lieboch

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, The machine is in excellent condition. Kodpfxeztwtle Ak Ajna There is a possibility to test it. Automatic size adjustment and forward feed.