Used Holzher Uno 1302 for sale (179)

Condition: used, The machine was in operation until the very end. Lrsdpfx Aezqzvxjgljr

Condition: excellent (used), Cutting height: 210 cm Cutting length: 500 cm Cutting depth: 60 mm Lrjdpfxszi Dm Rj Aglsr Engine: 4 kW Overall dimensions: Length 600 cm, Height 300 cm, Width 160 cm

Condition: used, Year of construction: 2004, Second-hand machine Year of manufacture: 2004 Condition: Tested and in working order Features and technical specifications: Travel ranges: - X-axis: 2,685 mm – Y-axis: 1,095 mm – Z-axis: 140 mm Milling unit: - 6 kW, water-cooled - Tool holder HSK 63 F – Speed 1,000 – 18,000 rpm - Tool changer: 6-position, side-mounted Drilling head: - 9 vertical drilling spindles in 32 mm increments - Horizontal drilling spindle: 1+1 - Vertical drilling spindle: 1+1 Groove saw: in the X-direction Control system: Twin CAm 32 Lrjdpfx Agezk Nmfjlor Vacuum pump: 100 m³/h Including vacuum suction cups Dimensions 5,200 x 2,843 x 1,855 mm Weight: approx. 3,500 kg Availability: by arrangement Storage location: Röllbach

Condition: used, Year of construction: 2019, Used machine Year of manufacture 2019 Equipment and technical data: - For classic nesting machining with a spoilboard - Machine frame of welded construction with ground and hardened prismatic guides for the moving column, aggregate head and consoles - Moving column in gantry design - Rack-and-pinion drive, helically toothed, in the X and Y directions, ball screws in the Z direction for precise positioning - Machining dimensions: - Max. support surface on nesting table: X = 3100 mm Y = 1560 mm - Max. travel: X = 4695 mm Y = 2100 mm Z = 293 mm - Max. clearance height DYNESTIC table Z = 100 mm from top of table (without spoilboard) - Maximum programmable speed vector speed: 128 m/min X = 80 m/min Y = 100 m/min Z = 25 m/min - DYNESTIC table: - Fixed, continuous machining table with grid layout - continuous grooves in the X and Y directions - groove spacing 50 mm - with 25 metres of sealing cord for clamping the spoilboard - Vacuum zones: single-circuit vacuum system - Drilling unit 7877: - 19 spindles - drive power: 1.7 kW - 13 vertical spindles: - individually selectable - U-shaped arrangement - 5+4 in the X and 4 in the Y direction - 32 mm grid - max. drill diameter: 35 mm - total drill length: 70 mm from screw-on end (depending on panel thickness) - spindle extension stroke: 70 mm - direction of rotation: clockwise / counter-clockwise alternating - n(max): 1000 - 4400 rpm infinitely variable - fitting: M 10 thread - fit 11 mm - without tool, without holder - 6 horizontal spindles: - 2 double drilling spindles in the X direction - 1 double drilling spindle in the Y direction - fitting: M 10 thread, fit 11 mm - total drill length max. 63 mm from screw-on end - without tool, without holder - Milling unit 7842: - power: 12.0 kW (S6) - n(max) = 1000 - 24000 rpm infinitely variable - max. power at 12000 rpm to 24000 rpm - air-cooled - with HSK-F 63 tool holder - with right-hand thread nut (for right-rotating tools) - with collet chuck with HSK shank - ceramic ball bearings (hybrid bearings) - tool weight max. 6 kg (incl. holder) - tools: milling and grinding tools max. Ø 160 mm - Safety guarding in accordance with CE standard - Protective fence at the sides and rear - Vacuum pump: 500 m³/h, dry-running - Personal safety via light barriers in the front area of the machine - Hand-held control unit for remote control of the machine with the following operating functions: - start / stop of the machining program - speed control of the machining cycles - reset button - manual feed / rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software 1x machine licence consisting of: - CAMPUS NC-HOPS: - graphical variant system with WOP and CAD/CAM properties for creating part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined lubrication intervals - Additional sealing against dust through overpressure in every guide carriage - Simultaneous lubrication: - for all linear guides in the X, Y and Z directions - for all ball screws in the Y and Z directions Lrsdjzlbrpopfx Agljr - for all milling spindle guides - for tool changer guides (except pick-up tool changer) - All console guides are not lubricat...

Condition: used, Year of construction: 2003, Second-hand machine Year of manufacture: 2003 Features and technical specifications: Control system with LCD display swivelling control panel Programme memory Manual pressure bridge adjustment Feed via conveyor chain Extendable workpiece support Joint milling unit 1961 : - 2 x 2.0 kW - Diamond jointing cutters in synchronous and counter-rotating operation, Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - automatic feeding of roll and strip stock Glue application system 1906: - Cartridge system with sensing nozzle – with automatic reloading - PUR adhesives can be used Printing unit 1816: - with powered roller - pneumatic control of the printing unit Trimming unit 1918: - 2 x 0.22 kW - swivels from 0 to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - for flush, radius and chamfer milling - motorised adjustment - Blow nozzle on the milling unit Corner copying unit 1832: - Corner copying up to r = 3 mm, post-forming up to r = 6 mm Radius scraper unit 1929 MOT 2: - Plastic edging up to 3 mm - Chip collection box for radius scraper Surface planer 1964: - application-controlled surface scraper - Air nozzle on the surface scraper Lrsdpjzk Nwwsfx Aglsr Buffing unit 1940 Edge thickness (roll stock): 3 mm Edge thickness of strip material: 5 mm Max. edge thickness for corner copying: 3 mm Workpiece thickness: 6–45 mm Workpiece thickness for corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8 m/min Workpiece support clearance: 470 mm Support plate diameter for edging material: 800 mm Trimming blade for roll stock up to: 3 mm Heating-up time: 3.5 min Power of jointing cutters: 2 x 2 kW Cross-cut saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Power for corner copying: 0.22 kW Extraction nozzle for joint milling unit: 120 mm Extraction nozzle for milling unit: 70 mm Extraction nozzle for scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: at short notice

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: 226/0-206, Max. cutting length 4,300 mm, Max. cutting height (vertical) 2,100 mm, Max. cutting height (horizontal) 2,010 mm, Max. cutting depth 60 mm Motor 4 kW Max. circular saw blade diameter = 250 mm, Extraction nozzle diameter = 120 + 100 mm Max. installation dimensions 5,080 x 2,780 x 1,600 mm, Lrsdowgm Ihopfx Agljr Support rails have been replaced! --- Excluding transport and assembly of the machine --- Ex works in Seevetal, as seen, Subject to prior sale

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Machine is completely workshop overhauled! Automatic horizontal and vertical positioning for absolute and incremental dimensions Digital readout for horizontal cuts PLC control with a 2-line display and plain-text error diagnosis for operation mode and fault diagnosis Infinitely variable feed speed up to 24 m/min Automatic workpiece end detection Calculator function integrated in the control panel (calculation of workpiece dimensions) Cutting length: 4300 mm Cutting height: 2200 mm Max. trimming height: 2100 mm Max. scoring height, vertical: 2100 mm Max. cutting depth: 80 mm Motor: 5.5 kW Saw blade speed: 4,500 rpm Saw blade diameter: 300 mm Ljdew Nac Ajpfx Agljrr Air requirement: 1,200 m³/h Air velocity: 20 m/s Static negative pressure: 1,200 Pa Extraction connection: 2 x 120 mm Dimensions (L x W x H): 5,620 (plus extraction nozzle) x 1,480 x 2,948 mm Room height: 2,990 mm Compressed air connection: 6 bar Air consumption: 50 NL/min Electrical connection load: 5.7 kW With Supercut pre-scoring unit With pneumatically swiveling saw unit With longitudinal stop for lower workpiece support With short folding rail, complete Availability: by arrangement Location: Flörsheim

Condition: used, Year of construction: 2007, Second-hand machine Year of manufacture: 2007 Features and technical specifications: Nesting system with grid table Machining dimensions: - X: 5000 mm - Y: 1240 mm - Z: 135 mm Travel ranges: - X: 5665 mm - Y: 1650 mm - Z: 325 mm with milling unit 7933: - Motor 11 kW (S6) - HSK 63 - water-cooled with C-axis with 18-position disc-type tool changer with 250 m³ vacuum pump Lredszk Nvgopfx Aglor with manual control unit with central lubrication with minimum quantity lubrication system Availability: at short notice Location: Röllbach

Condition: used, Year of construction: 2007, Second-hand machine Year of manufacture: 2007 Lsdpfx Agszk N S Ijljrr Specifications and technical data Cutting length: 5,300 mm Cutting height: 2,200 mm (trimming height 2,110 mm) Cutting depth: max. 60 mm Extraction system: - Saw unit 120 mm - Frame width 100 mm Workpiece support: - Sturdy plastic support for optimum stability, even for narrow workpieces. - Chips are removed via slanted slots. Lift-roller transport system: Manual, for light and gentle transport of materials Clamping: Manual, vertical and horizontal Feed: Manual, vertical and horizontal Circular saw blade: carbide-tipped, 250 mm, hollow roof-tooth, Z48 Saw motor: 4 kW at 5,450 rpm, 400 V, 50 Hz Tilting table: including workpiece support for narrow parts (5 positions) Includes strip stop with Supercut scoring device Extraction system in accordance with BG TRK guidelines (less than 2 mg of fine dust per m³ of air) Availability: at short notice Storage location: 63934 Röllbach

Condition: ready for operation (used), Year of construction: 2007, Brand: Holz Her Model: PRO-MASTER 7123K Serial no: 527/0-705 5010147 Year of manufacture: 2007 - 2 HSK cones included + various drills for drill box - Comes with a number of suction cups and some spare parts Tech. info: 4-axis (c-axis) 6 beams Motor-controlled adjustment of beams Number of vertical boring bits: 24 Number of vertical boring bits in X axis: 10 Number of vertical boring bits in Y axis: 8 Centres distance: 32 mm Horizontal double spindle in X axis: 2 Horizontal double spindle in Y axis: 1 Centres distance: 64 mm Working area: 3200x1260 mm Maximum travel path: X= 3866 mm Y= 1650 mm Z= 325 mm Workpeice pass height for tool change spindle with HSK 63F tool connection: 345 mm Max. machining thickness/ feed-in height (rear stop): 175 mm Max. workpiece size for vertical bores: X=3730R/ 3460L mm Y=1570 mm Max. workpiece size for horizontal bores X: X=3450R/ 3370L mm Y= 1315 mm Max. workpiece size for horizontal bores Y: X=4760R/ 3300L mm Y= 1385 mm Max. workpiece size for edge milling, less cutter radius (tool 25 mmdiameter x 125 mm, HSK): X=3510R/ 3525L mm Y=1445 mm Z=280 mm Max. workpiece size for grooving in X (dim. centre grooving tool approx. 120 mm): X=3300R/ 3760L mm Y=1585 mm Max. workpiece size for grooving in Y (dim. centre grooving tool approx. 120 mm): X=3200R/3860L mm Y=1485 mm Max. travel speed X axis: 100 m/min Max. travel speed Y axis: 100 m/min Max. travel speed Z axis: 25 m/min Max. travel speed C axis: 60 m/min Motor power of boring unit: 3 kW Motor power of saw: 1,5 kW Motor power of electro spindle unit with clamping system: 6 kW Speed electro spindle 1000-18000rpm Power: 22 kW, 50 Hz, 400 V, 3-phase Compressed air: operating pressure 6,0 bar permissible limit pressure 8,0 bar Air requirement: 300 l/min Extraction capacity: approx. 5300 m3/h Dust nozzle diameter: 250 mm Size: Length with control cabinet: 6420 mm Overall width: 3760 mm Height with extractor hood: 2475 mm Weight: 4200 kg Program Campus NC-HOPS Operating system Microsoft Windows Graphic variants system with HOP and CAD/CAM properties For the creation of parts variants with macro technology Program operation Windows-conform surface configuration and operator guidance Macro / variant programming Indication and simulation modes Export and import facility to the various branch programs Interaction possibilities with a variety of branch programs Stock no: 2002061BXA with reservation for incorrectly presented technical data Lsdpfxorz Irrj Agljrr

Condition: excellent (used), Year of construction: 1980, I sell the small double side moulder Holz-Her 1710. Feeding with top Feeder Working width 110mm Working height 90mm Lrodpoyc N Easfx Aglor 2 spindles Configuration: right - left 3KW Total power apprx. 5,5kW Machine suitable for small elements, lamellas, beehives. Fully working! Very good condition. Sellable immediately

Condition: used, Holz Her Sprint 1317 Heavy-duty version – edge thickness 0.4 – 8 mm SPS (programmable logic controller) screen control Infeed guide rail controlled by SPS Pre-milling unit for applying before the gluing section Fully automatic edge magazine for coil and strip material Lodezkr A Aspfx Aglsrr Glue application station: cartridges + PU gluing Glue application using nozzle technology Workpiece height 6-50 mm Glue height adjustment Pressing unit, pneumatic Trimming unit 1918 for coil and strip material up to 8 mm edge thickness with pneumatic adjustment for 0-10° angled trimming Milling unit 1942 MOT2 flush trimming 8 mm, radius milling – chamfer milling – 15° Pull blade unit for chamfers and radii with 2 pull blade holders Shaping milling unit 1832 for rounding corners up to edge thickness 3 mm in a single pass pneumatic infeed and outfeed Surface pull blade unit – finishing Machine is FULLY FUNCTIONAL and in GOOD CONDITION Sold on behalf of a carpentry workshop/trainer Availability: mid-July 2026 Ex-works, special price, net €8,500.00

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Ljdpfx Ajvvkfdoglorr

Condition: like new (used), Year of construction: 2004, I sell the panel beam saw HOLZ-HER CUT85. Year 2004. Cutting size 3200x3200mm. Cutting height 85mm. Max saw blade diameters 350 + 180mm Main motor 11kW Scoring motor 2,2kW Ljdpfx Ageppwtvelerr Total power 15kW Total area covered W.5636mm x D.6520mm 6 pcs. gripper with pneumatic regulation Side alignment top roller with pneumatic stroke. Optimising software included. Label printing included. Very good condition. Available immediately.

Condition: used, Year of construction: 2009, Automatic central lubrication Milling unit 7833 2-stage, 11 kW power 1000 - 24000 rpm 1 double drilling spindle in X-direction 1 integrated sawing unit for sawing / grooving in X-direction, traveling Tool changer 7892, 16-way Linear Pick-up changer, permanently installed on the right-hand side of the machine Laser pointer consisting of 2 laser pointers for positioning the vacuum suction cups or tracing the workpiece contour Automatic console - suction cup positioning 6 consoles including 3 suction cup holders per console including 1 vacuum suction cup 80x80 mm per suction cup holder including 4 feeding aids Additional processing fields at the front for 6 consoles Basic unit pneumatics for frame clamping system 7974 (6 consoles) 2D barcode scanner Video camera in the processing head Vacuum pump 140 m³/h Vario tool Change changing unit package consisting of Consists of: Vector axis 7899 (C-axis), fully interpolating, 0-360° continuously rotatable, including pneumatic tool changer 7890, single-slot magazine pick-up system, permanently installed in front of the machine frame on the left. Tool changer 7894, 6-slot pick-up magazine specifically for Vario Tool Change tool holders, permanently installed in the machine frame on the left, can be equipped with a Vario Grip KSJ F 40 collet chuck, 3 Vario Grip KSJ F 40 tool holders (for 2-20 mm ER32 collets), 1 saw blade holder, 3 collets according to customer selection, 1 carbide circular saw blade, max. 220 mm diameter. Storage location: Nattheim Lrjdpevvi Spofx Aglsr

Condition: excellent (used), HOLZ-HER EVOLUTION 7405 machining center - used Throughfeed processing, 4-sided profiling possible, integrated vacuum pump, automatic vacuum positioning, hardened, dust-protected prism guides, ball screw spindles on all axes, network card for remote maintenance, integrated control cabinet, control cabinet cooling with heat exchanger, handheld control unit, XL drilling head, saw unit for grooving in the X direction, pick-up tool changer, central lubrication system, automatic ----- Technical Data ----- min. workpiece length X: 200 mm, min. workpiece length Y: 70 mm, min. workpiece thickness: 8 mm, max. workpiece length X: 3,200 mm, max. workpiece length Y: 920 mm, max. workpiece thickness: 70 mm, machine control software: CAMPUS HOPS, main spindle motor power: 6.5 kW, main spindle speed: 1,000 - 18,000 rpm, main spindle mounting: HSK-F63, drilling unit motor power: 1.7 kW, drilling spindle mounting: M10, interference fit 11 mm, number of vertical drilling spindles: 13 pcs., no. of horizontal double drilling spindles in X direction: 2 pcs., Lrodpfx Aeyrp Srsglor no. of horizontal double drilling spindles in Y direction: 1 pc., saw blade diameter of saw unit: 120 mm, number of tools in tool changer: 6 pcs., extraction connection diameter: 2 x 120 mm + 1 x 140 mm, required volume flow: 4,100 m³/h, required static negative pressure: 2,500 - 3,000 Pa, required air velocity: 30 m/s, compressed air connection: 6 bar, compressed air consumption: 300 l/min. Quality information: - complete basic cleaning - electrical system checked - pneumatics checked - adjusted according to manufacturer's specifications - ready for immediate use

Condition: excellent (used), Year of construction: 2005, Brand: HOLZ HER Model: SPRINT 1310 - CE Standard Automatic edge banding machine with cartridge-based glue system for processing wood, PVC, ABS, and veneer edging. Suitable for furniture, panel materials, custom manufacturing, kitchens, bathroom furniture, joineries, and much more – complies with CE standards. Technical Data: Min./Max. panel height: 6 – 45 mm Edge thickness: 0.4 – 6 mm Maximum glue pot height: 51 mm Minimum panel width: 60 mm Minimum panel length: 180 mm Feed speed: 8 m/min Compressed air: 6–7 bar Machine Features: Lrodpfey Emw Hox Agljr Automatic feed for roll and strip material Cartridge glue system enables in-operation switching between EVA and PUR adhesives or changing glue color 3 pressure rollers, 1 driven End trimming unit with 2 motors, each 0.22 kW Multifunction unit with controlled axis for flush and chamfer trimming, with 2 motors at 0.6 kW each Surface scraper unit Radius scraper unit Buffing unit Soundproof hood Control: Rotatable and tiltable operator panel All units individually controllable Function display with text and graphics Aggregate pre-selection display Program list with names and numbers, self-diagnosis Approximate machine dimensions: 3900 x 1050 x 1800 mm (H) Weight: 1000 kg INCLUDES OTT Rondomat corner rounding unit Used machine information: • Technical data subject to change and prior sale. • Prices are ex-works, loaded free of charge! • The machine has been cleaned and function tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machines at location. • Special agreements are only valid in written form. (Enquiries will only be answered with your address and telephone number!)

Condition: used, Year of construction: 1983, usedMake Holz-HerType 1215Year of construction 1983MachineNo. 1222cutting depth 80 mmmotor 4 kWcutting length approx. 5300 mmcutting height approx. 2000 mmsaw blade diameter approx. 300 mmfree-standingslatted frame moving awaysuction connection D approx. 100 mmspace requirement approx. 6300 mm x 1100 mm x 2700 mmWeight approx. 1000 kgTotal connected load approx. 3 kWStorage location 97447 Gerolzhofen, free loaded, unpackedHandover in as-is condition as inspectedwithout guarantee and warranty Lodpfxjvwfnps Aglorr

Condition: good (used), Year of construction: 1982, Cutting length 4.300 mm Lrodjygm Tiopfx Aglsr Cutting height 1.800 mm machine weight ab. ca. 600 kg kg

Condition: used, Year of construction: 2001, Second-hand machine Year of manufacture: 2001 Condition: well-maintained Features and technical specifications: Cutting length 4,300 mm Cutting height 2,200 mm Cutting depth 45 mm Motor: 3 kW Saw blade diameter 220 mm with SuperCut scoring device with automatic sliding grate Complete with length stop Lrsdozk Nm Eopfx Agljr Includes strip stop Availability: at short notice Location: 63934 Röllbach

Condition: excellent (used), functionality: fully functional, saw drive: 3,000 W, Holz-her 1220 automatic vertical panel saw. Multiple settings, half or whole board cutting. Lodpfx Agox Eyqyslorr You can try it, it works well.

Condition: excellent (used), Year of construction: 1993, Technical specifications: Manufacturer: Striebig Year of manufacture: 9/1993 Type: Standard II Plus 5220A Feed: manual Design: automatically adjusting aluminum slat bed Saw carriage locking: manual Lowering of saw unit: manual Swivel adjustment 0 to 90°: manual Lrjdeiwlz Aopfx Aglor Motor power: 4.4 kW Cutting range: 4600 × 2200 × 60 mm Speed: 5250 rpm Saw blade diameter: 300 mm Space required: L × H × W 5700 × 3000 × 1400 Condition: very good Location: warehouse Saw blade: 1 piece Can be loaded onto a truck using a forklift on site. Delivery and assembly possible by arrangement.

Condition: excellent (used), Panel Saw HOLZ-HER 1255 SECTOR pro – used – • Welded frame with extremely high rigidity • Pneumatically retractable support grid • Sturdy saw carriage latching mechanism at top and bottom • Electrically monitored latching in vertical cutting mode • Foldable plunge lever on the saw unit • Retractable riving knife for cut-outs • Operator control panel at eye level • Digital display on longitudinal fence • Digital display for horizontal cut • Strip cutting device • Lift roller transport system • Trimmable support table • TRK extraction unit • Dust tested • Only used for 2 months Ljdpfx Aoy N Rihogljrr ----- Technical Data ----- Cutting length: 5,300 mm Cutting height: 2,200 mm Cutting depth: 60 mm Saw blade Ø: 250 mm Motor: 4 kW Extraction port Ø: 120 +100 mm Compressed air: 8 bar Year of manufacture: 2025 Quality info: - Complete basic inspection - Complete basic cleaning - Ready for immediate use

Condition: used, Year of construction: 1981, used, good conditionMake Holz-HerType 1215Year of manufacture 1981MachineNo. 710motor 4.0 kWcutting length approx. 5300 mmcutting height approx. 2100 mmcutting depth 80 mmsaw blade diameter approx. 300 x 30 mmfree-standingslatted frame moving awayspace requirement approx. 6550 mm x 1265 mm x 2895 mmweight approx. 1000 kgstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in as-is condition as inspectedwithout guarantee and warranty Lrodpfx Agjvwfmxsljr

Condition: excellent (used), Panel Saw HOLZ-HER 1255 -used- Welded frame with extremely high rigidity, pneumatically retracting shifting grid, stable latching of the saw carriage at both top and bottom, latch monitoring in vertical cut electrically controlled, foldable plunge lever on the saw unit, retractable riving knife for cut-outs, operator panel at eye level, digital display on the longitudinal fence, digital display for horizontal cut, strip cutting device, roller lift transport system, trim-capable support surface, dust extraction device TRK, dust-tested. ----- Technical Data ----- Cutting length: 5200 mm, Cutting height: 2200 mm, Trimming height: 2100 mm, Cutting depth: 60 mm, Minimum height on folding rail: 120 mm, Saw blade Ø: 250 mm, Motor: 4 kW, Extraction port Ø: 120/100 mm, Compressed air: 6 bar, Required space (LxWxH): 6500x1650x3050 mm, Weight: 900 kg Quality Information: - Fence strips replaced / refurbished - Comprehensive basic inspection - Complete basic cleaning - Electrical system checked - Immediately operational Lrodpoyyzp Hjfx Agler