Used Hydraulic Press for sale (26,013)

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, power: 4 kW (5.44 HP), We are offering this very well-maintained Uniflex HM 325.2i_C.2_FD_MVA hose crimping machine with foot pedal, year of manufacture 2020. Model: HM 325.2i_C.2_FD_MVA Serial number: 60046 Voltage: 400 V Current: 15/8.5 A Power: 4.0 kW Frequency: 50/60 Hz Year of manufacture: 02/20 Price ex works. The machine must be collected either personally or via freight forwarding. Payment terms: 50% down payment / 50% upon collection – no cash payments! Payment by bank transfer only. Any warranty and liability are excluded. Ledpfx Asy Apdwoh Sjaf If you have any questions or require more information, please do not hesitate to send us a message.

Condition: used, Manufacturer: Hylatechnik Paul Chrubasik GmbH Type: HSSP 300-3-XA4 Machine type: Hydraulic press Year of manufacture: 2000 Condition: used Press force: 3,000 kN Press force: 300 t Stroke: 300 mm Maximum installation height: 800 mm Table area: 2,000 × 1,550 mm Ram area: 2,000 × 1,540 mm Front opening: 2,000 mm Side opening: 1,050 mm Table height: 800 mm Rapid traverse: 340 mm/s Working speed 1: 32.5 mm/s Lodpfxszrz D So Ah Sjaf Working speed 2: 19.5 mm/s Retraction: 340 mm/s Maximum working pressure: 280 bar Drive power: 75 kW Power supply: 400 V Frequency: 50 Hz Machine weight: approx. 38,500 kg Hydraulic oil tank: approx. 2,000 l Pulling cushion: no Equipment: Complete DREHER strip system DREHER strip unwinder DREHER strip feeder DREHER strip conveyor system Hydraulic die cushion with parallel movement Hydraulic roll blocks Tool changing consoles Siemens SIMATIC control panel Note: The system is currently running at a slow speed but has no significant damage. We will gladly send you videos of the machine in operation upon request.

Condition: used, Heavy-duty hydraulic hole-press, perforated panel press or gluing press for gluing or securing workpieces such as frames, panels, windows or doors. Technical data: - Cylinders: 6 Lsdjzryy Sspfx Ah Soaf - Hold-down units: 3 - Pressing area: 260 x 145 cm

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 17850 € 342.72 € 100 to fix 1020 mm 300 mm 1020 mm 680 mm 9 mm/s 5 mm/s 10 mm/s 6 mm 500x1020 mm 100 mm 190 mm 2110 mm 1000 mm 2275 mm 2082 kg 2 guidings big upper tool holder and table with t-slots Ljdeynm Nmspfx Ah Soaf upper and lower pressbrake tool manometer rapid down move with automtic change to working speed piston stops in every position 2 hand panel AND FOOT PEDAL Tisch höhenverstellbar according to CE regulations user manual in GERMAN and ENGLISH

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, pressing force: 200 t, Hans Schoen NH/LF 200 (UVV) – Powerful & Robust 🔧 Model: Hans Schoen NH/LF 200 📍 Type: Hydraulic Double-Column Press (UVV-certified) 📅 Year of manufacture: approx. 1988 (depending on the specific machine) 📦 Condition: used, fully functional ⸻ 💪 Technical Highlights • Pressing force: approx. 200 t – suitable for demanding forming and drawing applications • Hydraulic drive for precise force and stroke control • Column clearance: approx. 1,050 mm – generous working area • Stroke: approx. 150 mm – efficient travel distance • Table size: approx. 1,000 × 1,200 mm – large clamping area • Table height above floor: approx. 850 mm – ergonomic working height • Hydraulic control (often with PLC/Siemens control) possible • Safety and UVV certification for manual loading – increased operational safety 💡 Thanks to its robust construction, this press is ideally suited for series production, drawing and forming processes as well as machining and assembly tasks in metalworking operations. ⸻ 📌 Features & Equipment • Two-hand operation / safety control • Adjustable mechanical stop • Pressure cut-off • Pressure switch • UVV-compliant safety features → all for efficient and safe operation on the shop floor Currently UVV-certified. ⸻ 🛠️ Applications This press offers versatile usage, such as for: • Metal forming / drawing work • Assembly and joining part production • Testing and quality control processes • Series and small batch production ⸻ 📦 Size & Weight Laedpfx Ahex Ry Nys Ssf • Dimensions (approx.): Width × Depth × Height ≈ 4.0 × 3.6 × 3.4 m • Weight: approx. 16 t – robust industrial construction

Condition: used, Year of construction: 1992, functionality: fully functional, stroke length: 300 mm, table width: 1,400 mm, installation height: 500 mm, • Type of machine: Hydraulic press / C-frame press • Manufacturer: Müller Weingarten (historic German engineering company) • Model designation: CKD 100 4.1 • Applications: • Forming, punching, pressing of metal or plastic components • Small and medium batch production • Tool and die making • Design: Robust H-frame or single-column construction, suitable for precise pressing and forming operations • Capacity: Typically around 100 t pressing force (number indicates approx. 100 metric tons nominal force—common for CKD models) Lodpfxox Ry Hre Ah Soaf 📐 Typical Features • Hydraulic drive: Precise control of force and stroke • Stroke range: Sufficient for versatile applications (e.g. drawing, bending, punching) • Stable construction: Designed for continuous industrial operation • Tool integration: Mounting options for custom tools and dies • Operation: Usually manual or semi-automatic, depending on year of manufacture 🧱 Typical Uses Hydraulic presses like the CKD series are used in production for: • Metal forming (e.g. bending, deep-drawing) • Assembling components by pressing • Assembly processes with defined force • Quality assurance and test pressing Complete circuit diagrams and documentation available! Inspection under power possible at any time.

Condition: refurbished (used), RETROFIT complete Laedpfx Ahjw S Uaze Ssf Pressing force: 1600 kN Installation height: 800 mm Stroke: 500 mm Table: 900 x 630 mm Ram: 750 x 450 mm Throat depth: 360 mm Downward speed: 200 mm Upward speed: 125 mm Machine height: approx. 3,500 mm Weight: approx. 7,000 kg Connection: 17 kW - a complete retrofit kit for unrestricted manual loading and unloading compliant with EC directives and CE equipment requirements, - new control cabinet with certified two-channel electronic PLC safety controller from Siemens (1512SP F or 1515F) for process control, featuring integrated control panel for the operating modes: setup with two-hand control, single stroke with two-hand control, and foot operation (only in combination with BWS); manual lever operation is no longer possible, - hydraulic safety block for monitoring the closing movement of the main cylinder, - position-monitored directional valve for the up and down movement of the ram of the main cylinder, - two-hand control device with two-channel monitoring of the two-hand synchronization at the press table (incl. 5m cable), - replacement of main and control pump motors, - replacement of seals on the main cylinder, - fine filter with contamination indicator, - the press is equipped with an electronic position measurement system (including teach-in function and display of the current ram position), eliminating the need for a mechanical cam switch. Main control panel integrated into the control cabinet (mounted on the right side of the machine): - 12" touch panel - Control buttons and switches for operating modes and drives - USB interface for data exchange - Light curtain Option: Drawing cushion

Condition: used, Year of construction: 1998, pressure 315 t stroke 500 mm throat 425 mm dayligth 1000 mm table surface area 1200 x 815 mm Ljdpfxszrppvo Ah Ssaf table height over floor 800 mm ram surface 1100 x 700 mm feed down 48 mm/s feed up 330 mm/s working feed 19 mm/s oil volume 1600 l power requirement 82,0 kW Weight 23,0 t dimensions of the machine ca. 2,4 x 2,8 x 4,0 mxmxm with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard at front (Sick), two-hand operation

Condition: used, Industrial Hydraulic Press, Hydraulic press, 100t press, C-frame hydraulic press, HYDRAP PRESSEN HPS ZB 100, Used machine Ljdpfxozk Amrs Ah Sjaf Manufacturer: HYDRAP PRESSEN GmbH (Plüderhausen, Germany) – Premium manufacturer of industrial press machinery Type: HPS ZB 100 Serial number (Fabrik-Nr.): 6535 Year of manufacture (Baujahr): 1991 Weight: 14 700 kg Condition: Used, heavy-duty industrial design Technical and operating parameters: Permissible load / Pressing force (Zul. Belastg.): 1000 kN (approx. 100 tons capacity) Effective stroke (Nutzhub): 300 mm Drive type (Antriebsart): Hydraulic (HYDR.) Supply voltage (Spannung): 380 V Frequency (Frequenz): 50 Hz Type of current (Stromart): D (Three-phase AC / Delta configuration) Drive power (Antr.-Leistg.): 45 kW Rated current (Nennstrom): 90 A Oil viscosity (Öl-Viskos.): HLP 46 Oil capacity (Ölmenge): 780 liters Stopping distance (Nachlaufweg): 34 mm Stopping time (Nachlaufzeit): 112 ms Safety distance (Sicherheitsabstand): 192 mm

Condition: good (used), Year of construction: 1990, pressing force: 3,000 t, Bending length: 14,000 mm Lsdpozva Ahefx Ah Soaf Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm

Condition: good (used), Year of construction: 1994, Pressure: 250 t Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Ledjzvaymepfx Ah Seaf Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t

Condition: good (used), Year of construction: 1975, Pressure: 250 t Throat: 400 mm Stroke: 30...140 mm Table size: 1000 x 750 mm Lodezvayaopfx Ah Sjaf Passage opening in table: 360 x 400 mm Ram area: 630 x 500 mm Ram adjustment: 110 mm Total power requirement: 18 kW Machine weight approx.: 16 t

Condition: excellent (used), Year of construction: 1991, Distance between column:1870mm Hight under roof: 1400mm Table Length: 1600mm Length: 3400mm Width: 3400mm Height: 3500mm Lsdswyuqkspfx Ah Soaf Weight: 19000kg

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, The machine is fully operational and in good condition. Lajdpfx Ahoxmr Rxo Sef Working dimensions: 3200 x 2200 mm Dimension adjustment is electrically controlled from the control panel. Powered by a hydraulic unit.

Condition: good (used), WF HHP 625 – Horizontal Press Year: 2006 Manufacturer: WF Maschinenbau u. Blechformtechnik GmbH & Co KG Germany Machine Model: WF HHP 625 Machine Type: Horizontal Hydraulic Press Technical Specifications: Maximum workpiece diameter: 625 mm Minimum workpiece diameter: 350 mm Maximum workpiece length: 325 mm Maximum press stroke: 750 mm Maximum press force: 2000 kN Siemens 840D control system Parker hydraulic components Hydraulic oil tank capacity: approx. 800 liters Required cooling water for hydraulic system: approx. 1000 l/h Cooling water inlet temperature: max. 25°C Air supply connection: 6 bar / ½” Ambient operating temperature: 10°C – 40°C Hydraulic Equipment: Main Hydraulic Motor: Manufacturer: Blumenbecker Type: 14BG 207-4AA 200L Power: 30 kW Voltage: 400V / 50Hz Speed: 1465 rpm Secondary Hydraulic Motor: Manufacturer: Blumenbecker Type: 7AA 132 S-4 Power: 5.5 kW Ljdpfxjzb Il No Ah Ssaf Voltage: 400V / 50Hz Speed: 1450 rpm Hydraulic Pump: Manufacturer: Parker Type: PV080R1K1T1NSLD Internal Gear Pump: Manufacturer: Denison / Parker Type: T6CMYR20-1-R_00C1 Flow rate: 93 l/min at 1450 rpm Central Lubrication Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Oil Spray Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Machine Dimensions (Transport Position): Width: approx. 2600 mm Length: approx. 5800 mm Height: approx. 2400 mm Weight: approx. 20,000 kg Additional Information: Hydraulic horizontal press with automated loading/unloading preparation Robot loading interface prepared (robot not included) Transport and lifting drawings available Original manuals and technical documentation included

Condition: used, Year of construction: 1999, Hydraulic press Dunkes HEZ 100-40, year of manufacture 1999 Hydraulic press Dunkes HS2 63, year of manufacture 1999 Lasdpfx Ahezu Arvj Sef Eccentric press Ebu 75, year of manufacture 1985

Condition: used, Hydraulic workshop press, keyway milling press, groove milling press Hydraulic workshop press, custom-built, MaVo type 5t-20 Used for milling keyway grooves in through-holes. Pressing force: 5 tons (at 100 bar hydraulic pressure) Stand width: 770 mm Cylinder stroke: 220 mm Distance from threaded piston rod to table traverse: max. 900 mm Pressing speed, ram downwards: approx. 11.5 mm/sec. = 220 mm in 19 sec. Pressing speed, ram upwards: approx. 24.5 mm/sec. = 220 mm in 9 sec. Motor power: 5.5 kW Mains connection: 400 volts, 50 Hz - 2-hand control (one button for pump on, 1 button for downwards, 1 button for upwards) - Hydraulic pump HAWE, type K5/3 (can also deliver 400 bar, but the pump is very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm for the piston rod with M42 x 1.5 mm internal thread Lasdpfowki Apox Ah Sof - 1 screw-in extension, approx. 250 mm for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm length - 2 support plates - Very stable steel construction made of 140 series double T-beams - Estimated load-bearing capacity of the steel construction: 40 tons or more - Can be moved with a pallet truck Space requirement L x W x H: 1200 x 930 x 2280 mm Weight: 485 kg

Year of construction: 1995, condition: used, machine/vehicle number: 211045 H110, Response time: 133 ms, clamping force: 2,500 kN, control unit, two-hand operation, upstream light barrier, separate control cabinet, 1 workbench with a Garant two-jaw vise mounted on it, storage shelf. Laodpfx Aozqzcrjh Sof

Year of construction: 2006, condition: used, machine/vehicle number: 10510, Drive power: 138 kW, clamping force: 4,500 kN, machine weight: approx. 74,000 kg, max. tool weight: 7,500 kg, tool dimensions: approx. 2,150 x 1,300 mm, stroke: approx. 61 mm, SIEMENS SIMATIC C MULTI PANEL control, two-hand operation, upstream light curtain, separate RITTAL control panel system, cooling system, including accessories: 1 workbench, 1 sheet metal cabinet, contents: various hand tools. Laedpfxozqzd As Ah Sjf

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Ljdpfx Ajvvkmbjh Sjaf Storage location: Nattheim

Condition: used, Year of construction: 1959, machine/vehicle number: 4501, hydraulic table press Laodpszp Nxrofx Ah Ssf

Year of construction: 2018, condition: ready for operation (used), A dismantled Mecamaq hydraulic press is available. Pressing force: 100t, max. pressure: 290bar, main piston diameter: 200mm/120mm, auxiliary cylinder diameter: 40mm/25mm. Main cylinder working stroke: 500mm, max. installation height: 800mm, working height: 800mm, effective dimensions X/Y: 700mm/500mm, table dimensions X/Y: 800mm/500mm, working speed: 6mm/s, return speed: 150mm/s. Max. tool dimensions X/Y: 800mm/600mm, max. tool weight: 1000kg. Machine dimensions X/Y/Z: approx. 1000mm/1350mm/2750mm, weight: approx. 4000kg. Documentation available. On-site inspection is possible. Lsdpowkiiiofx Ah Sjaf

Year of construction: 2005, condition: ready for operation (used), Clearance between the frames: 890mm, throat depth: 200mm, bending width: 1000mm, press force: 280kN, connected load: 5.5kVA, required fuse protection: 3x 16A, weight: 3.5t. An inspection on site is possible. Ljdpfezbb R Eox Ah Sjaf

Year of construction: 1977, condition: ready for operation (used), A hydraulic universal press is offered. Press force: 75t, stroke: 250mm, table surface X/Y: approx. 600mm/500mm, safety distance: 107mm, overrun distance: 18mm. Equipment: manually adjustable stroke limitation (top/bottom), integrated ejector with draw cushion control, analog pressure gauge up to 400bar. Safety device: SICK safety light curtain for the working area. Total weight: approx. 3500kg, overall dimensions X/Y/Z: approx. 1300mm/1800mm/2900mm. Inspection possible by arrangement. Lasdpoy S A Nfefx Ah Sjf

Year of construction: 1981, condition: ready for operation (used), Press force: 650kN, Stroke: 150mm, Pressure piston diameter: 190mm, Column spacing X/Y: 950mm/460mm, Installation height: 500mm, Table dimensions X/Y: 900mm/870mm, max. stroke: 150mm, Operating pressure: 200bar, Machine dimensions X/Y/Z: approx. 1500mm/1750mm/2400mm, Weight: approx. 3000kg. Documentation available. An on site inspection is possible. Lasdpeyq R D Hjfx Ah Ssf