Used Induction Melting Furnace for sale (1,695)

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Foundry electric induction melting furnace for melting of: - Steel - iron - aluminum - copper - brass - Bronze TECHNICAL DETAILS Nominal power: 1 ton Temperature: 1700 °C Transformer capacity: KVA 800 Year of manufacture transformer: 2014 High voltage: 10 +- 2 x 2,5% kV current: 41,86 / 38,97 - 23,89 A Guodpfolxnlfsx Aftsk Low voltage: 840 - 105 V Current: 464 - 275 A EQUIPMENT / SCOPE OF DELIVERY Hydraulic tilting Water cooling system

Condition: good (used), functionality: fully functional, MKN Induction Oven 2×4-Pole Manufacturer: MKN Model: 2023109-02 Gujdpfx Aex E Dd Djftjk Power supply: 400–440 V, 3-phase Power: 20.0 kW Dimensions: 1700 × 900 × 900 mm The MKN 2×4-pole induction oven is a professional appliance designed for use in gastronomy and production facilities, where high performance, fast heat-up time, and precise temperature control are essential. Eight cooking zones allow for the simultaneous preparation of multiple dishes, providing great flexibility in the kitchen. MKN's induction technology ensures energy efficiency, safety, and even heat distribution directly to the cookware, significantly improving operator comfort and efficiency.

Condition: good (used), Foundry4 Dosing Furnace TD1400DC Aluminium Melting Furnace Melting Furnace 850°C Capacity 1,400 kg Heating power 22 kW 4 units in stock Gusdpext Habjfx Aftok

Year of construction: 2015, condition: new, rotary drum dimensions: length: 6000 mm inside: Ø 1600 mm outside: Ø 2280 mm max. temperature: 1200 ° C heating: gas eating power 2700 kW melting capacity: 6000 kg / h The plant consists mainly of: Gsdpfxscmxzij Aftouk - furnace - hydraulic power pack and tilting mechanism - heating system - carousel with molds - charge box - measuring and control system

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: Seriennr.: 4046, Equipment: documentation/manual, Ingot casting belt 600 Gedju S N Ahopfx Aftouk Zinc melting furnace ZSO 600 / 700 B

Condition: new, 7 pieces heating coil new for a melting furnace Fulmina SOU 20E, Technical data: Reversible element with connection ends Ø 10 x 270 mm power: 10.000 Watt Voltage: 220 Volt cold resistance: 4,60 (± 5%) Ohm wire diameter: 4,50 mm coil inner Ø: 29 mm leg length: 240 mm Number of legs: 3 x 8 pieces Wire quality: CrFeAl Y 3 heating coils are a complete set in this model (the pictures of the melting furnace serve the representation and show the model in which the heating coils were installed, they fit however also into other models with smaller or higher achievement, it changes only the number of pieces) immediately available from stock Gsdpfxed Tx A Ee Aftouk

Condition: reconditioned (used), Melting and casting furnace for aluminum and ZnAl. The furnace is after a general renovation, new lining, specialized painted, functional. The furnace capacity for aluminum is approximately 3,000 kg. Suitable for melting with a gas, oxygen or oil burner. Gedjh Nycaopfx Aftjuk

Condition: ready for operation (used), Andouart extruder Gsdsx Engpspfx Aftjuk

Condition: ready for operation (used), Extruder + electric cabinet output: 200 kg Heads not included Godox Dd Hmspfx Aftjuk Winder not included

Condition: ready for operation (used), A good used induction heat sealer model ICS 1H from Relco UK - ideal for low speed semi-automatic or manual line with diaphragm in cap for sealing onto container. Gusdpfxsua E Rqs Aftsk

Condition: excellent (used), GH Induction Type: 30 SMBC Transistor generator for inductive heating Medium frequency with series resonant circuit The SMBC generator series retains the traditional advantages of the Transithermic family of generators (high reliability, simple operation and high efficiency) in a series resonant circuit and a compact design, with cooling enclosed in the generator enclosure. Rittal generator cabinet and GH induction TC150 / 2 resonant circuit Voltage 400V Frequency 50 Hz Current 56 A Power 37.5 KVA Gusdpfxsb E I Utj Aftsk as good as new condition! Scope of delivery: Transistor generator, Rittal generator cabinet with cooling and TC150 / 2 resonant circuit (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Heated Chocolate Mixing Tanks Qty 2 available Gedpfextqx Uox Aftouk Stainless steel

Condition: like new (used), functionality: fully functional, overall weight: 26,700 kg, For sale: High-power TECO Westinghouse 3-phase induction motor, originally installed as the main drive for a booster draft fan (BTV-7) in a power plant. This is a 6 kV / 5.6 MW industrial motor designed for heavy continuous operation (S1 duty) with high reliability and thermal protection systems. The motor was operated indoors, extremely clean, no corrosion, and includes all premium options: ✔ RTD sensors (bearings + windings) ✔ Condensate heater (anti-moisture) ✔ Corrosion-protected housing ✔ Heavy-duty bearings (BBRN) Perfect for large-scale industrial ventilation, induced/forced draft fans, compressors, pumps, or retrofit installations in power and process industries. Technical Specifications Power Rating: 5600 kW (5.6 MW) Voltage: 6000 V (6 kV) Current: 658 A Frequency: 50 Hz Speed: 745 rpm Efficiency: 96.2% Power factor: 0.92 Duty: S1 (continuous) Insulation class: F Bearings: BBRN industrial heavy-duty bearings Condensate heater: 220 V / 1200 W Sensors: RTD sensors on bearings and stator windings Motor weight: ~26,700 kg Design: Outdoor-rated, corrosion-proof; installed indoors → excellent condition Condition Very good / excellent No corrosion or structural damage Clean windings, clean terminal box Bearings in good condition Motor stored and operated in controlled indoor environment Fully functional and removed from working installation Applications Booster draft fans (ID/FD fans) Large centrifugal or axial fans High-power pumps (cooling water, circulation pumps) Compressors Mining & metallurgy Power plant auxiliary systems Godpfsxxm Dwsx Afteuk Chemical & petrochemical industry TECO Westinghouse motor, 5600 kW motor, 6 kV induction motor, high-power motor, booster fan motor, ID fan motor, FD fan motor, heavy-duty motor, industrial motor 6 kV, power plant equipment, energy sector machinery, BTV-7 motor.

Condition: like new (used), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, As new! Used for only 15 production days. Hot Air Furnace — Capacity: 2,000,000 kca This unit is in excellent condition, practically as new, with only 15 days of operation. Ideal for industrial heating or drying applications. For more details or photos, please contact us. Guedpfxexq Rv Ie Aftok

Condition: new, Year of construction: 2025, An active lime production line is a set of equipment designed to produce high-quality lime from limestone, with the aim of meeting various industrial applications, such as in the production of steel, environmental desulfurization, and other processes. The process typically involves several stages, including limestone crushing, calcination, hydration, and finally, the production of active lime. Here is a general overview of the main steps involved in an active lime production line: 1. Limestone Quarrying: - Raw limestone is extracted from quarries and transported to the lime plant. The limestone may undergo crushing and sizing processes to achieve the desired particle size. 2. Limestone Preheating: - The raw limestone is typically preheated in a preheater or precalciner before entering the rotary kiln. This preheating step helps to reduce the energy consumption in the kiln by partially decarbonizing the limestone. 3. Loading into the Rotary Kiln: - The preheated limestone is loaded into the rotary kiln, a large, rotating cylindrical furnace. The kiln is inclined at a slight angle to facilitate the movement of materials through the kiln. 4. Calcination: - In the rotary kiln, the limestone undergoes high-temperature calcination (typically in the range of 900 to 1,450 degrees Celsius). This process causes the limestone to undergo chemical and physical changes, converting it into lime (calcium oxide). 5. Cooling: - After calcination, the lime moves through the cooling zone of the kiln, where it is cooled down. This cooling step is essential to stabilize the lime and prepare it for further processing. 6. Hydration: - The quicklime produced in the kiln is then slaked with water in a hydration process to produce slaked lime (calcium hydroxide). This is typically done in a separate hydrator. 7. Separation of Unreacted Lime: - The slaked lime is separated from any unreacted quicklime or impurities. This step ensures that the final product is of high quality. 8. Filtering and Drying: - The separated slaked lime is filtered to remove excess water, and the resulting product is dried to achieve the desired moisture content. 9. Storage and Packaging: - The final product, active lime (calcium oxide), is stored in silos or other storage facilities. It can then be packaged for sale or transported to end-users. Gjdpfx Ajq Nyzbofteuk 10. Environmental Considerations: - Dust collection systems and other environmental control measures are often implemented to minimize emissions and ensure compliance with environmental regulations. The design and configuration of an active lime production line can vary based on factors such as the type of limestone used, production capacity requirements, and specific industrial applications. Modern production lines often incorporate advanced technologies to optimize energy efficiency, minimize environmental impact, and ensure high-quality active lime production.

Condition: good (used), electric motor, three-phase motor -Power: 1.1 kW Guedpfxjdd Ax Ts Aftek -Speed: 920 rpm -Shaft diameter: 24 mm -Bolt circle flange: Ø 165 mm -Flange: Ø 200 mm -Design: B5 -Protection class: IP 54 -Dimensions: 315/200/H205 mm -Weight: 15.5 kg

Year of construction: 2016, condition: ready for operation (used), Suitable for stainless steel wire: 1.4301, 1.4310, 1.4401, wire diameter: 0.25-0.5mm with a strength up to 2400 N/mm², working speed: 75-80m/min, temperature range: 400-650°C, suitable for four wires at the same time with one temperature gauge (movable), shielding gas: forming gas grade 95/5 95%N2/5%H2, nitrogen gas, cooling: water-cooled tubes. Guodpfx Afsn R Nhqstjk

Condition: like new (used), Chanber size: 280x180x500mm upper 280x130x450mm lower Guodpfxsd Sm Dio Aftok Max temperature: 700 C °

Year of construction: 2019, operating hours: 34,933 h, condition: ready for operation (used), machine/vehicle number: NO-19-05-07358/GE1101824, Technical data (German) Manufacturer: EFD Induction a.s. Type: SINAC 50/80 SM Serial number: NO-19-05-07358/GE1101824 Year of manufacture: 21/19 Electrical data: Input voltage: 400-480 V AC Input current: 90 A Mains frequency: 50/60 Hz Gujdpjvw S Rwjfx Aftsk Input power: 62 kVA Reactive power: 62 kVAr Output data: Output voltage: Not specified Output current: 350 A Output power: 50 kW Frequency range: 10-25 kHz Cooling & operating conditions: Water consumption: 21 l/min Maximum inlet temperature: 35°C Maximum pressure: 6 bar Min. pressure difference inlet/outlet: 4.5 bar Ambient temperature (operation): +5°C to +50°C Protection class (IP): IP54

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: SINAC 25/40 SM Exp, total height: 1,500 mm, total width: 1,000 mm, total length: 2,500 mm, type of input current: three-phase, input voltage: 400 V, pressure: 6 bar, input current: 45 A, Induction heating station with 25 kW power for transporting and pressing bearings. Gusdpfsw Hwp Nsx Aftok

Year of construction: 2019, condition: ready for operation (used), Connected load: 84kVA, length: 5065mm, width: 1100mm, height: 1530mm. Guodpog A Trgjfx Aftjk

Condition: ready for operation (used), load capacity: 600 kg, Hindenlang TPESM-600 - Induction oven Max temperature: 850° Gujdpfx Afjx Enflstok Voltage: 400 V

Condition: new, Year of construction: 2025, Firing chamber output: 49kW Working power: 45kW New appliance in original packaging: Yes Hot air blower, flue gas blower, electronic control with digital display: included Supply air filter, recirculation air intake filter: large-surface supply air filter without power loss / included Hot air conveying pipes: 2 x 200mm with plug-in freely rotatable 90° bends Smoke outlet diameter: 180mm Firebox length: 660mm Firebox width: 480mm Firebox height: 600mm Air flow : 3500m³/h Supply air filter: Yes, large-surface supply air filter without power losses Power consumption: 550W designed for room volume: 1000m³ Gusdpfopn Nyzox Aftok Weight: 310 kg

Condition: excellent (used), SLM Solutions Model: SLM 280 HL For sale is a professional metal 3D printer SLM 280 HL by SLM Solutions (Lübeck). The machine comes from industrial use, is fully documented, and is delivered including nameplate data and technical documentation. Guedpex Agt Hofx Aftsk The SLM 280 HL is designed for 24/7 operation and is suitable for aluminum, stainless steel, tool steel, cobalt-chromium, and many other metal powder materials. Included modules and accessories: - AMC 330 WB Air Management/Filter Module - HRS050-AF-20-M Chiller Unit - DC 1.5 KAESER Compressor / Compressed Air Module Technical Data (Excerpt) Machine Weight: 1,245 kg Dimensions (without accessories): Width: 1.7 m Height: 2.0 m Depth: 1.1 m Build volume: 280 × 280 × 250 mm (optional depth 350 mm) Electrical connection: Power consumption: 15 A Building-side protection: 32 A Control voltage: 24 V DC Heating power: 1,200 W Protection class: IP50 Power input: 4.7 kW (single optics) / 8.0 kW (twin optics) Media supply Argon Operating pressure: 6 bar Flow rate (purge): approx. 130 l/min Flow rate (build process): approx. 3 l/min Quality: DIN EN ISO 14175 – Class 4.6 (≥99.996 %) Compressed air Operating pressure: 6 bar Flow rate: without nitrogen generator: approx. 100 l/min with nitrogen generator: approx. 500 l/min Quality: ISO 8573-1:2010 Class 1:4:1 Cooling water Medium: distilled water Primary circuit: Pressure: 4 bar Flow rate: 0.3 l/min Supply temperature: 18–20 °C Secondary circuit: Min. pressure: 2 bar Max. temperature: 40 °C Volume: 1.7 m³/h pH value: 5.8–7.0 Operating conditions Ambient temperature: 20–25 °C Max. relative humidity: 60 % Designed for continuous (24 h) operation (Weight approx. 1,245 kg). Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of supply: (see picture) - SLM 280 HL machine - Control cabinet - Process chamber - Internal control panel with screen - Available documentation, parts lists, manuals (Subject to changes and errors in the technical data!) We will be happy to answer any further questions by phone.

Condition: ready for operation (used), load capacity: 600 kg, nominal power: 69 kW (93.81 HP), Hindenlang TPESM-600 - Induction oven Max temperature: 850° Voltage: 400 V Godpsx Enffsfx Aftsuk