Used Kramer 512 Sl for sale (74)

Condition: used, Swivel bending machine KRAMER, type A-Maut. II 1000 Manufacturer’s serial number: 48 287, year of manufacture: 1990 Useful length: 1060 mm Maximum sheet thickness: 3.75 mm Stroke of the upper die: 180 mm Adjustability of the bending die: 60 mm Rear stop: 480 mm Drive power of the bending die drive: 4 kW Drive power of the upper die drive: 1.5 kW Mains connection: 400 volts, 50 Hz - Manual and semi-automatic control - Angle setting via angle pre-selection dial - One-piece pointed beam, 135° - Rear stop with hand crank adjustment and simple measuring scale - Continuous stop rail - Electric foot switch, 3-way Space requirement: L x W x H: 2200 x 1350 x 1500 mm Weight: approx. 2.3 tons Ljdpfxefnabyo Anyoac Good condition

Year of construction: 1985, condition: good (used), machine/vehicle number: xxxx, Technical specifications: Ledof S Tg Tspfx Anysac - Bending and rolling processes performed manually, - Max. working width: 1020 mm - Max. material thickness (St 40): 1.25 mm - Bending angle adjustment via end stop: 10 - 180° - Max. stroke of the upper die: approx. 85 mm - Max. adjustability of the bending die: 20 mm - Shaft diameter: 55 mm - Upper shaft can be pivoted outwards - Rear shaft can be adjusted parallel and at an angle - Space requirement: approx. W 1500 x H 1400 x D 750 mm - Weight: approx. 400 kg

Year of construction: 1987, condition: ready for operation (used), A three-roll plate bending machine Kramer is available. Working width: 2000mm, max. plate thickness: 3mm, power: 3kW. An on-site inspection is possible. Laedpfxsyttv Rs Anyjc

Condition: used, Year of construction: 1985, sheet thickness: 2,25total power requirements: 1,1sheet length: 2025 Working length: 2025 mm Ledpfevaatfox Anysac Kl. Tail width: 5 x s Kl. Inner radius: 1.5 - 2 x s Adjustability of the lower and bending beams: 90 mm for round bends: 90 mm Highest working position of the upper beam: 190 mm large opening width of the upper beam: 290 mm Duration of a workflow: 7.0 sec. External dimensions approx.: 3000 x 1000 x 1650 mm with: - Control panel on the right side of the machine - Simple bending angle adjustment on the control panel - Choice of switching to automatic, semi-automatic or typing mode - Potentiometer for degree adjustment -Foot switch used, in good condition

Condition: used, sheet length: 1050width: 800heigth: 1400sheet thickness: 3 Bending Machine - Dimensions (L x W x H): approx. 210 cm x 80 cm x 140 cm - Working width: approx. 105 cm Lasdpfx Ansvaar Ieyjc

Condition: used, power: 110 kW (149.56 HP), Year of construction: 2018, operating hours: 4,800 h,

Condition: ready for operation (used), Year of construction: 2009, A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible. Ljdjxl Elgjpfx Anyjac

Condition: like new (used), Meat grinder K+G Wetter Operating voltage: 400V / 50Hz Control voltage: 24V Power: 38kW Laodpex Aydljfx Anysc

Condition: used, Grinder Manufacturer: Kramer Grebe Wetter Lajdpfxjt Uqble Anyec Model: Grinder 130mm Made of stainless steel Lowest noise level Easy cleaning Hopper volume: 245 liters Voltage: 400V 50Hz Weight: 850kg

Condition: used, Cutter Manufacturer: Kramer Grebe Wetter Bowl made out of stainless steel Dimensions: 290x244x210cm Control voltage: 230V Lajdpfsx Dcfnox Anyec Operating voltage: 400V / 50Hz Power: 74kW

Condition: like new (used), Cutter Ljdpfjxrvtzox Anyjac Manufacturer: Krämer Grebe Wetter Stainless steel Capacity: 65 liters 2 knife speeds 6 knives Power: 25kW

Condition: like new (used), The Kramer + Grebe SM 200 cutter (also known as a bowl cutter) is an industrial machine mainly used in the meat industry for cutting, mixing, and emulsifying meat and other ingredients. Main function: - It features a bowl with an approximate capacity of 200 litres. - The blades rotate at high speeds to cut meat, fat, ice, spices, etc. - Cutting while the bowl rotates produces a fine emulsion, resulting in a homogeneous texture in products such as sausages, pâtés, frankfurters, and more. Ljdpfx Asx S Ih Tonyoac

Condition: excellent (used), Height 360 cm Length 240 cm Width 220 cm 2.5 kW motor 4,800 m³h Ljdpfjrt Tt Dex Anyjac

Condition: used, Throughput depending on material type, speed, and cutting set Capacity: up to 4.000 kg/h Lodpfeu H Af Usx Anyjac Main motor power: 10KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 115

Condition: like new (used), Throughput depending on material type, speed, and cutting set Capacity: up to 4.000 kg/h Main motor power: 10KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 115 Delivery time: 10 working days after advanced payment Laodpfx Ajd S U E Rjnyjc

Condition: used, Grinder Manufacturer: Kramer Grebe Wetter Model: Grinder 160mm Integrated lift for ergonomic operation Made of stainless steel Lowest noise level Easy cleaning Rated power: 36 kW Control voltage: 24/230 V Operating voltage: 400 V / 50 Hz Lasdpfx Asxmg R Tjnyoc Total nominal current: 63 A Fuse protection: 80 A

Condition: used, Grinder Manufacturer: Kramer Grebe Model: WW200 For processing chilled meat and frozen meat blocks Made of stainless steel Hopper volume: 400 liters Diameter: 200 mm Voltage: 400V, 50Hz Lodpfx Ajtq T Rdenyeac Two speed motor Electric power: 31/40 kW Productivity up to 12000 kg/h Weight: 1300 kg

Condition: used, Grinder with mixer Lsdpfew Idzgox Anyjac Manufacturer: Kramer Grebe Wetter Model: Grinder 130mm Made of stainless steel Lowest noise level Easy cleaning Hopper volume: 245 liters Voltage: 400V 50Hz Weight: 850kg

Condition: used, overall dimensions 2900x2500x1550/2100 mm; bowl 200 ltr; power supply 400 V,50 Hz; 2 knife speeds 1500/3000 rpm, 48/66 kW; 2 bowl speeds, 2.2/2.7 kW; 2 mixing speeds, 2.2/2.7 kW; hydraulics 3.1 kW; loader; Lasdov Hppvspfx Anyoc unloader 0.37 kW.

Condition: good (used), Year of construction: 1991, Krämer + Grebe WW 200 Meat Grinder Manufacturer: Krämer + Grebe GmbH & Co. KG Laodpjx I Ny Ajfx Anyjc Model: WW 200 Machine number: 281/141 Year of manufacture: 1991 Plate diameter: 200 mm Power supply: 380 V, 50 Hz Current: 91 A Dimensions: 1900 × 1800 × 2250 mm Condition: incomplete – knives and plates are missing The Krämer + Grebe WW 200 industrial meat grinder is a robust machine designed for grinding raw meat and product blocks in medium and large food processing plants, particularly in meat or cheese production. The machine is constructed from stainless steel, ensuring a high level of hygiene and easy cleaning. The 200 mm throat diameter enables efficient product loading and preparation for further processing stages.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Krämer + Grebe SC-WW Meat Grinder Manufacturer: Krämer + Grebe Type / Model: SC-WW Lodpfx Aex E Dqqenyjac Machine number: 282/118 Year of manufacture: 1991 Power supply: 380 V, 3 phases, 50 Hz Current draw: 117 / 160 A Cutting plate diameter: 200 mm Overall dimensions: 1750 × 1350 × 2550 mm The Krämer + Grebe SC-WW industrial meat grinder is a robust and durable machine designed for heavy-duty use in meat processing plants. Equipped with a high-performance working chamber and a 200 mm cutting plate, it ensures efficient and uniform mincing of even highly chilled meat. The machine is ideal for large-scale production, delivering stable operation, high repeatability, and safety in technological processes.

Condition: refurbished (used), Year of construction: 1985, functionality: fully functional, total length: 1,250 mm, total width: 900 mm, total height: 1,150 mm, input voltage: 380 V, power: 10 kW (13.60 HP), Kramer Grebe WW130 1985 year 2 speeds - 10kW and 15kW 380V 50Hz Lasdex Dy Nqepfx Anysc 125 cm x 90 cm x 115 cm Entirely stainless steel, stainless steel screws, includes a set of knives and nets. Machine refurbished in 2025

Condition: good (used), The KRÄMER+GREBE TMG 1500/200 mixing grinder is a professional stainless steel machine designed for industrial meat processing. It is ideal for grinding and mixing both fresh and partially frozen meat. Mixing Grinder CFS – KRÄMER+GREBE TMG 1500/200 Manufacturer: CFS – KRÄMER+GREBE Model: TMG 1500/200 Year of Manufacture: 1998 Machine Number: 371/0109 CE Certification: Yes Machine Features: Mixing tank capacity: approx. 1500 liters Processing capacity: Fresh meat: approx. 800-900 kg Partially frozen meat: approx. 700-750 kg Meat grinder throat diameter: 200 mm Main motor power for grinder: 45 kW (1 speed) Screw speed: 160/320 min⁻¹ Main motor power for mixer: 7.5/11 kW (2 speeds) Mixing paddle speed: 16/32 min⁻¹ Additional Equipment: Pneumatic sorting device Pneumatic discharge flap for mixer Laodjumlibepfx Anyoc Stainless steel base Integrated loading for 200-liter wagons Application: This mixing grinder is ideal for meat processing plants that require efficient and reliable machinery for grinding and mixing large quantities of meat. Machine Benefits: High performance when processing both fresh and partially frozen meat. Durable stainless steel construction ensures longevity and easy maintenance. Adjustable mixing and grinding speeds allow customization of settings to meet various production needs. Integrated pneumatic systems provide smooth and efficient operation.

Condition: like new (used), Completely made of special stainless steel Specialized for grinding cheese and yellow cheese BLOCKS Hole plate diameter: 200 mm Hopper capacity: approx. 400 liters Synchronized speed for shatter and feed screw Working worm Machine dimensions in сm: Width: 215,0 Depth: 150,0 Laedpfxopgnfts Anyjc Height: 196,0 Main Motor Power: 45 kW Installed Power approx. 65 kW Voltage: 380 V, 50 Hz