Used Lead Screw for sale (6,432)

Condition: good (used), Year of construction: 1994, machine/vehicle number: 149804-5, Offer 26195 - Operating hours: 63,733 h - Operating pressure: 8 bar - Delivery rate: 5.93 m³/min - Drive: 400 V / 37 kW - Motor speed: 3000 rpm - Suction pressure: 1 bar - Space requirement: approx. W 1000 x H 1450 x D 1300 mm - Weight: approx. 560 kg Dcjdpfs Ah Ea Djx Ak Asp

Condition: used, Year of construction: 2020, functionality: fully functional, overall weight: 2,041 kg, total length: 2,300 mm, total width: 1,380 mm, total height: 1,950 mm, power: 75 kW (101.97 HP), volume flow: 851 m³/h, pressure (min.): 5 bar, pressure (max.): 7 bar, ambient temperature (min.): 5 °C, ambient temperature (max.): 40 °C, noise level: 74 dB, protection type (IP code): IP54, Equipment: documentation/manual, refrigerant dryer, type plate available, For sale is a highly efficient, frequency-controlled screw compressor from the top-of-the-line range of the German manufacturer ALMiG, type V-DRIVE 75 (PLUS O version including heat recovery), first purchased at the end of 2020. This unit impresses with minimal energy costs thanks to its loss-free 1:1 direct drive, stepless speed control and integrated heat recovery (WRG). Technical data: Manufacturer: ALMiG Kompressoren GmbH Type: V-DRIVE 75 PLUS O including WRG Drive power: 75 kW Maximum pressure: 7 bar Volume flow: up to 14.18 m³/min (approx. 851 m³/h) Voltage: 400 V / 50 Hz Control system: ALMiG Aircontrol Premium (including RS 485, operating and fault messages) Dimensions (L x W x H): 2,300 x 1,380 x 1,950 mm Weight: 2,041 kg Equipment & special features: Installation in a special container: - Weather-protected outdoor installation directly on the company premises. - Generous, double-wing access doors for unrestricted maintenance access. - Integrated window with exterior roller shutter. - Standardized container corner fittings (ISO corners) for crane or lifting gear handling are available. - Integrated heat recovery (WRG): For direct use of waste heat for heating purposes or hot water. - Integrated refrigeration dryer (PLUS) & filter system (O): High compressed air quality directly from the compressor. - SCD frequency inverter & asynchronous motor (IP55): Stepless adaptation to demand, soft start without peak loads. - Sound-insulated: Extremely quiet operation thanks to optimized encapsulation and vibration-isolated installation. - Documentation: Complete documentation / manual available. Important sales & collection conditions: Dods Ahppdepfx Ak Ascp - Delivery condition: Sale is ex works (FCA). - Loading: No loading facilities available on site! - The removal must be organized by the buyer using a truck with a loading crane or a separate mobile crane (lifting equipment suitable for ISO container corners required). - The sale is made excluding any liability for defects and warranty. Subject to prior sale and errors.

Condition: good (used), Year of construction: 1994, machine/vehicle number: 149804-6, Offer 26196 - Operating hours: 70,428 h - Operating pressure: 8 bar - Delivery rate: 5.93 m³/min - Drive: 400 V / 37 kW - Motor speed: 3000 rpm - Suction pressure: 1 bar Djdpe Ah Eh Sjfx Ak Ascp - Space requirement: approx. W 1000 x H 1450 x D 1300 mm - Weight: approx. 560 kg

Condition: excellent (used), Year of construction: 1988, machine/vehicle number: 101067003, functionality: fully functional, power: 37 kW (50.31 HP), input voltage: 380 V, input frequency: 50 Hz, pressing force: 900 t, stroke length: 450 mm, table width: 750 mm, table length: 580 mm, distance table to ram: 450 mm, clearance between the columns: 640 mm, total length: 3,100 mm, total width: 3,200 mm, total height: 5,070 mm, overall weight: 25,500 kg, Equipment: documentation/manual, Dellavia screw press, screw diameter 280 mm, rated capacity 900 tons, in perfect condition. The machine is available for immediate sale and can be viewed at our workshop in Peschadoires, France. The technical documentation will be provided with the press. Dsdpfe Ahy Nlsx Ak Ascp Attached you will find photos of the press and the technical data sheet. Price upon request.

Condition: ready for operation (used), PROD. ATLASCOPCO TYPE GA132 S/N AIF052565 YEAR 1998 POWER (kW) 132 CAPACITY (m3/min) 19 PRESSURE (bar) 7.5 Dcsdpfj Ah H A Iox Ak Aop HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 2 1/2 NEW/USED USED

Condition: excellent (used), Year of construction: 2019, operating hours: 2,092 h, functionality: fully functional, machine/vehicle number: IT J320209, overall weight: 447 kg, total length: 1,935 mm, total width: 655 mm, total height: 1,680 mm, volume flow: 270.122 m³/h, operating pressure: 13 bar, pressure (min.): 5 bar, pressure (max.): 13 bar, noise level: 64 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, The compressor is in excellent condition!!! The electronics have been completely replaced!!! Only 2029 operating hours. For sale due to downsizing of the machine park!!!!...Completely overhauled, including filter replacement. Dedpfx Aksz Ah Uxs Ajcp

Condition: ready for operation (used), Manufacturer: H&G Dsdpfx Akszp Ilqo Ascp Model: HG/SV 11 Weight: 1800 kg Engine power: 11 kW

Condition: repair required (used), Year of construction: 2004, Schneider compressed air screw compressor defective System needs to be repaired. Machine is being sold cheaply because it needs to be repaired. Dcedsvmivcjpfx Ak Aep Engine power: 11 KW Volume flow: 1500 liters/min Compressor pressure: 10 bar Location: from warehouse 54634 Bitburg Machine is being sold as defective Without guarantee - without warranty -

Condition: excellent (used), functionality: fully functional, pressing force: 450 t, stroke length: 300 mm, table width: 850 mm, table length: 630 mm, distance table to ram: 860 mm, total length: 3,100 mm, total width: 3,100 mm, total height: 4,300 mm, overall weight: 20,000 kg, Equipment: documentation/manual, Ficep PFM 215 screw press, screw diameter 215 mm, 450-ton capacity. In very good condition, as shown in the photos and technical specifications attached. The press is stored in our workshops in Peschadoires, France. Technical documentation will be provided with the machine. Dsdpfxe Ahzbto Ak Ajcp Price upon request.

Condition: defective spare-parts repository (used), Year of construction: 2004, machine/vehicle number: A II 151768, Offer 25979 Defective screw compressor - compact unit - Operating hours: 16550 h - Operating pressure: 10 bar - Delivery rate: 15.9 l/s - Drive: 400 V / 7.5 kW - Motor speed: 3000 rpm - Air tank: 250 L - Space requirement: approx. W 700 x H 1830 x D 1050 mm Dcedpfowrcq Nex Ak Ajp - Weight: approx. 250 kg

Condition: ready for operation (used), operating hours: 1,721 h, functionality: fully functional, fuel type: electric, Mahle screw compressor, 75 kW, 10 bar, 11,000 liters per minute. Dcsdpfs Advbgjx Ak Ajp Only 1,720 operating hours.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Screw Compressor by Boge Boge screw compressor, model S220. This compact, high-performance unit provides a reliable supply of continuous compressed air for industrial applications. It is excellently suited for production lines, assembly operations, pneumatics and control systems, as well as for larger machine fleets requiring stable air pressure. The design is characterized by durability, ease of maintenance, and efficient power delivery, contributing to reduced operating costs. Technical specifications: Type: S220 Operating hours: 54,947 h Pressure: 8 bar Free air delivery: 27.9 m3/min Motor speed: 1,500 rpm Dcjdpfx Akow Rd Avs Asp Power: 160 kW Next maintenance: in 1,000 h.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, ATLAS COPCO GA26VSD+ screw compressor, equipped with a frequency converter, recently serviced. Technical specifications: Capacity: 5.15 m3/min; Engine power: 26 kW; Maximum pressure: 13 bar; Year: 2015; Operating hours: 9845 h. Dsdpfoy Idhnsx Ak Ajcp Price: 30,900 net. Price: 38,007 gross. The compressor is in full working order, ready for operation, and comes with a warranty. We also provide service support. Link to video below.

Condition: excellent (used), machine/vehicle number: 6835, power: 120 kW (163.15 HP), pressing force: 1,600 t, stroke length: 600 mm, table width: 1,250 mm, table length: 900 mm, distance table to ram: 1,600 mm, total length: 4,270 mm, total height: 7,760 mm, overall weight: 96,000 kg, Equipment: documentation/manual, 1600-ton screw press, Hasenclever FPRN 400 The press is complete and in very good condition. This machine was used to produce aircraft engine components at Rolls Royce. Dsdpfxs Ah H Ugo Ak Ajcp The press is complete and is offered with its electrical cabinet. Attached you will find photos of the press, as well as a technical data sheet. Price upon request.

Condition: good (used), Year of construction: 2012, machine/vehicle number: CD 10010334001, Offer 26197 Technical data: Dcodpfo Ah Emaox Ak Asp - Operating hours approx. 68221 h - Operating hours under load approx. 66941 h - Operating pressure 13 bar - Delivery rate 6.9 m³/min - Drive 400 V / 37 kW - Engine speed 3600 rpm - Control system DELCOS XL - Space requirement approx. W 1750 x H 1750 x D 1000 mm - Weight approx. 1000 kg

Year of construction: 2022, operating hours: 80 h, condition: new, functionality: fully functional, Clextral extruder Type: Evolum EV032 M Extruder: 40D Barrel length: 10 x 128 mm Stroke length: 1420 mm Water: 4.5 - 5.5 Bar Air pressure: 6 Bar Steam injection: 2 - 6 bar Power: 3 x 400V, 50Hz, 83kW Dimensions: 4475 x 1200 x 2100 mm Weight: 1905 kg Only 80 operating hours! Clextral water pump Type: CLX DKM Flow: 6 - 42 l/h Pressure: max. 10 bar Reservoir: 7.5 liters Power: 0.55 kW Dimensions: 1265 x 350 x 700 mm Cextral / Prominent oil pump Type: GMXA1604 Flow: 0.3 - 2.5 l/h Pressure: max. 10 bar Dodpfxsz S Idks Ak Aecp Reservoir: 10 liters Dimensions: 900 x 700 x 1150 mm Clextral High Moisture Extrusion Cooking die HMEC type: 2 x 800 mm length Material: CLX202 Internal section: 60 x 8 mm Dimensions: 1900 x 700 x 1200 mm TLV steam set Type: 2/10 TLV Serial number: SV148 Steam flow: 2 - 10 kg/h Steam pressure: 6 - 10 bar Maximum pressure: 10 Bar Steam inlet: DN15, PN16 Steam outlet: DN15, PN16 Air pressure: 6 - 10 bar Dimensions: 700 x 1600 x 2200 mm Weight: 150 kg 2 pcs. Tooltemp temperature control unit Type: TT1398-3 Serial number: 321-5642-1 / 2 Year of construction: 2021 Power: 3 x 400V, 50Hz, 7.9kW Dimensions: 750 x 300 x 760 mm Weight: 70 kg WAM Group ploughshare mixer Type: WBH20008C023 Serial number: 17WB220000121 Year of construction: 2022 Mixer: 75 liters Dimensions: 1200 x 1600 x 1650 mm Weight: 500 kg Immequip screw conveyor Type: ELV 70/80-R Hopper: 150 liters Output: Ø 100 mm Power: 3 x 400V, 50Hz, 0.55kW Dimensions: 3100 x 1350 x 2600 mm Brabender dosing system Type: DDW-M-DDSR20 Serial number: 2200836.0636 Year of construction: 2022 Feed rate: 11 - 26 kg/h MTA France chiller Type: TAEevo TECH 081 Serial number: 2200377928 Year of construction: 2021 Refrigerant: R410A Cooling capacity: 20.6 kW Power: 3 x 400V, 50Hz, 14.2kW Dimensions: 1950 x 800 x 1500 mm Weight: 340 kg

Condition: new, Year of construction: 2026, Stainless Steel Screw Conveyor for Bulk Materials Industrial Screw Conveyor with Feeding Hopper for Automatic Material Handling The Screw Conveyor is designed for automatic conveying and feeding of bulk materials into dosing systems, storage hoppers, filling machines and packaging equipment. The machine is suitable for handling polymer materials, flour, spices, dry food mixtures, powders and other bulk materials, including products with limited flowability. The conveyor consists of a stainless steel screw, conveying tube, feeding hopper and electric drive. The rotating screw transports material from the feeding hopper to the discharge outlet, providing continuous material flow to downstream equipment. The conveyor is available in different conveying lengths and can be integrated into existing production and packaging lines. 1. Technical Specifications * Type: Screw Conveyor * Application: Automatic feeding and conveying of bulk materials * Effective Conveying Length: 3000 / 4000 / 5000 / 6000 mm * Motor Power: 2.2 kW * Conveying Tube Diameter: 109 mm * Screw Material: Stainless steel * Hopper Material: Stainless steel * Hopper Capacity: 150 L * Conveying Capacity: 500–600 kg/h * Power Supply: 380 V, 3 Phase, 50 Hz * Weight: 180 kg Actual conveying capacity depends on the material properties, bulk density, conveying length and operating conditions. 2. Conveying System The conveyor uses a rotating screw inside a conveying tube to transport bulk materials from the feeding hopper to the discharge outlet. The screw and feeding hopper are manufactured from stainless steel. The 150-liter hopper provides temporary material storage and allows continuous feeding into the conveying system. Available conveying lengths range from 3000 to 6000 mm. Dedpfx Ao Ah H S Nsk Ajcp 3. Main Features * Screw conveying system for bulk materials * Stainless steel screw and feeding hopper * 150-liter feeding hopper * Conveying tube diameter of 109 mm * Available conveying lengths from 3000 to 6000 mm * Continuous automatic material feeding * Suitable for integration into production and packaging lines 4. Applications The Screw Conveyor is suitable for: * Feeding bulk materials into dosing equipment * Loading storage hoppers * Supplying filling and packaging machines * Conveying polymer materials * Handling flour, spices and dry food mixtures * Transporting powdered and other bulk materials

Condition: excellent (used), Year of construction: 2024, Exhibition and demonstration unit New Kaeser Aircenter SM 16 – 10 bar screw compressor with integrated refrigeration dryer and compressed air tank Sigma Control 2 control system Year of manufacture: 2024 Operating hours: few Pressure: 7.5 bar Rated power: 9 kW Delivery rate: 1.61 m³/min Sound level: 66 dB(A) Compressed air outlet: 3/4" Compressed air tank: 270 liters volume Refrigeration dryer pressure dew point: +3°C Electrically controlled condensate drain: ECO DRAIN Dimensions length x width x height: 630 x 1220 x 1720 mm Weight: 440 kg Dedpj Agw Dmjfx Ak Aecp Location: available from warehouse 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2011, Compressor design: Screw compressor Dedpfxj Agpdko Ak Ajcp Pressure: 9/10 bar Volumetric flow rate: 460 l/min Weight, approx.: 170 kg Motor power: 4 kW Storage location: Rieth

Condition: used, machine/vehicle number: PMAM010000, Bertolaso Athena 40/8 Fruit Juice Filler with Adjustable Stars consisting of: Djdpfx Ae Ahk Rrjk Ascp - Jucie Filler 40/8 - 8 Head Screw Capper for: 28 TS RO PP (MCA28),  VC 30x60 (BVS 30/60 , Pick & Place Plastic Caps 38mm

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, overall weight: 1,654 kg, Equipment: refrigerant dryer, type plate available, Atlas Copco air compressor, model: GA90VSDFF, oil-injected screw compressor with frequency converter (VSD), with dryer, pressure: 12.7 bar, air flow: 293.1 L/s, motor: 3508 rpm, year: 2016, weight: 1654 kg. Shipping throughout Europe not included, VAT not included. Reference: 1167 Dsdpfx Akeyxpz Us Aecp

Condition: used, Year of construction: 2017, functionality: fully functional, From the dismantling of a production facility belonging to an automotive supplier, professionally disassembled. Available quantity: 16 units Dedpfxj Agp Has Ak Aecp Brand: CLECO Series: MPRO400GC Voltage: 230 V AC Frequency: 50/60 Hz Rated current: 2 A Power: Typically 250 VA Protection class: IP42

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, machine/vehicle number: 06 00003 00112, screw diameter: 65 mm, TECHNICAL DETAILS Screw diameter: 65 mm Process length: total 40 L/D, divided into 24D + 16D Extruder drive according to datasheet: 45 kW MACHINE DETAILS Operating voltage: 3 × 400 V, 50 Hz AC control voltage: 230 V, 50 Hz DC control voltage: 24 V Dcodpfx Aj Ah Ei Nok Asp Rated current: 130 A Total power: 65 kW Maximum pre-fuse: 160 A Dosing speed: 102 rpm EQUIPMENT Single-screw extruder including the control system mounted on the frame and a die. Note: The machine is sold without a melt filter, water bath, and strand granulator.

Condition: used, Year of construction: 2017, Offered for sale is a rotary screw compressor with an integrated refrigerant dryer. Volume flow rate: 1.82m³/min, operating pressure: 9.75bar. Controller: Atlas Copco Elektronikon Graphic with display. Equipped with an integrated refrigerant dryer (FF version) and emergency stop switch. Inspection possible by arrangement. Dcedpfx Ako Ad Nqbj Aop

Condition: excellent (used), Year of construction: 2018, PROD. ATLASCOPCO TYPE GA45 FF S/N API585058 YEAR 2018 POWER (kW) 45 CAPACITY (m3/min) 8.29 PRESSURE (bar) 7.25 Dodj Aazttopfx Ak Aecp HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER yes, R410a 0.97kg HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no CONNECTION 11/2 DOCUMENTS no