Used Lead Screw for sale (6,272)

Condition: good (used), Stock number: 2852 Manufacturer: Poland Year of manufacture: 1974 Lsdpfex Uykxsx Abnoac Machine number: 33891 Type / Model: TUD 50 Centre distance: 2,000 mm Spindle bore: 56 mm Centre height: 250 mm Swing over bed: 500 mm over cross slide: 300 mm Speed range: 18 to 1,800 rpm Longitudinal feed: 0.08 to 3.26 mm/rev Cross feed: 0.04 to 1.63 mm/rev Power connection: 7.5 kW Accessories/Equipment: 3-jaw chuck Condition: good Weight: approx. 3.5 t Dimensions: 3,500 x 1,150 x 1,600 mm

Year of construction: 2000, condition: used, Serial number: 385/65 R 22.5 Laedpsx Ahkasfx Abnjc NETTE TRAILER TIRES.

Condition: good (used), Screw bookbinding press 40×30 with base The machine is fully operational and ready for operation. Lodpfx Aezdat Rjbnsac Format: 400×300 mm Pressure: 3 tons Made in Germany.

Condition: good (used), Screw Conveyor Custom made conveyor Overall dimensions: 3500 x 900 x 2600 mm Screw dimensions: diam. 150 x 2700 mm Ledpfjhfdviex Abnoac

Condition: good (used), Screw cooling compressor ABB SVA 24, two units in complete YOM 1991 Made in Germany Good working condition Laodpfoyb Sdisx Abnsc

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-600 Laodpsy H Aizofx Abnsc • Type: Double Helix Screw Washer • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: like new (used), Year of construction: 2013, Manufacturer: Kaeser Kompressoren, Germany YOM 2013 Maximum Pressure: Up to 13 Bar Productivity 8.26 cubic meters/min Energy Efficiency: The direct drive coupled with IE4 efficiency motors (or IE5 on SFC models) ensures superior energy efficiency. Low Maintenance: Components are designed for long service life, with easy access for maintenance. SIGMA Control 2: Ensures efficient monitoring and control of the compressor. Rotary compressor type Screw by lubrication Oil Noise level 70 dB Height 1900 mm Length 1110 mm Width 1760 mm Weight 1250 kg Electrical parameters Mains voltage 380~400 V Lasdpfx Aoyy U Shebnjc Power consumption 45 W Current frequency 50 Hz User characteristics Compressor cooling system Water cooling is possible, with subsequent use of heat. Complete system ready to use fully automatic extremely effective sound insulation vibration insulation powder-coated housing parts for ambient temperatures up to +45°C easy maintenance: lubrication nipples for motor bearings are located on the outside (also for fan motor).

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SCC, warranty duration: 12 months, volume flow: 45 m³/h, screw conveyor length: 6,000 mm, type of input current: three-phase, screw diameter: 323 mm, input voltage: 400 V, rotational speed (max.): 240 rpm, rotational speed (min.): 140 rpm, Custom-manufactured to order. Send us your diameter, length, and installation angle — receive a full technical quote within 24 hours. INOTEK SCREW manufactures heavy-duty SCC-type cement screw conveyors for bulk material handling in cement plants, dry mortar facilities, fly ash transfer, lime and gypsum processing lines. Based in Ankara, Turkey, we have supplied equipment to over 40 countries with full export documentation and ISO 9001:2015 certified production. KEY SPECIFICATIONS: - Diameter: Ø114 / Ø168 / Ø219 / Ø273 / Ø323mm – any size made to order - Drive speed: 140 / 200 / 240 RPM - Motor power: 1.5 kW to 22 kW (IE2 efficiency class) — Siemens motors standard - Material: Carbon steel S235/S355 standard | AISI 304/316 stainless steel on request - Screw flights: cold-rolled, 3–10mm thickness - Orientation: horizontal, inclined (up to 45°), or vertical - Custom inlet/outlet: conical, square, or rectangular - Surface treatment: primer + epoxy topcoat standard | hot-dip galvanizing on request CAPACITY BY DIAMETER (approximate, horizontal, cement powder): - Ø114 mm → 4–8 m³/h - Ø168 mm → 10–18 m³/h - Ø219 mm → 20–30 m³/h - Ø273 mm → 30–40 m³/h - Ø323 mm → 40–55 m³/h Lsdpfxeyq H Iuj Abnoac All values depend on RPM, inclination angle, and material bulk density. Custom diameters and capacities available on request. APPLICATIONS: Cement | Fly ash | Limestone powder | Dry mortar | Gypsum | Clay | Silo filling & emptying | Batching plants | Asphalt facilities WHY INOTEK: ✔ CE marked — compliant with EU Machinery Directive 2006/42/EC ✔ ISO 9001:2015 certified factory ✔ 12 months warranty — replacement parts shipped internationally ✔ Exported to 40+ countries – full documentation (packing list, EUR.1, certificate of origin, test reports) ✔ Trusted by: Coca-Cola | Unilever | Anadolu Efes | Limak Holding | OYAK | Cengiz İnşaat ✔ 20–35% more competitive than equivalent European pricing ✔ Production lead time: 3–5 weeks from drawing approval PRICING REFERENCE: Entry-level unit Ø114mm — from €1,500 EXW Ankara. All diameters, lengths, and configurations quoted within 24 hours. REQUEST A FREE QUOTE WITHIN 24 HOURS: Send us your required diameter, length, material type, and installation angle – we return a full technical offer and delivery schedule. Distributor and OEM partnerships welcome. Contact us to discuss exclusive regional agreements.

Condition: used, Year of construction: 2009, Manufacturer: H&G Model: HG/SV 11 Weight: 1800 kg Laedpfex Hyfyjx Abnoc Engine power: 11 kW

Condition: ready for operation (used), Year of construction: 2023, power: 7.5 kW (10.20 HP), pressure (min.): 6 bar, pressure (max.): 15 bar, noise level: 62 dB, compressed air tank capacity: 270 l, The machine has already been dismantled and stored by a qualified technician. TECHNICAL DETAILS Operating overpressure: 15 bar Delivery rate (at 15 bar): 400 - 790 l/min Delivery rate (at 13 bar): 430 - 860 l/min Delivery rate (at 10 bar): 330 - 1,090 l/min Delivery rate (at 8 bar): 330 - 1,240 l/min Delivery rate (at 6 bar): 330 - 1,370 l/min Volumetric flow rate: 90 m³/h Air connection: 1/2" inches MACHINE DETAILS Compressed air tank: 270 l / 11 bar, upright, galvanized Residual oil content at 20°C max.: 0.01 mg/m³ Differential pressure wet, saturated: 110 mbar Rated power of drive motor: 7.5 kW Operating voltage / frequency: 400 ~3 / 50 V/Hz Sound level: 62 dB(A) Dimensions & Weight Dimensions (L x W x H): 1,079 x 553 x 1,014 mm Machine weight: 273 kg EQUIPMENT Refrigerant dryer Frequency control Prefilter grid Electronic control RENNERtronic Touch Level-controlled condensate drain KN5 230VAC, shortened version Schneider mounting kit ABZ-Eco 3100 Uni condensate drain Ecomat Schneider condensate collection line, 3 connections Pre-filter LPPN 73 FF5 Lajdpfx Abezb Idrensc Particle filtration 5 microns Sub-micron filter LPPN 73 SMA Particle filtration 0.01 microns Wall mount incl. connection kit for 2 filters LPP 23 - LPP73 2x connection hose VSL 1/2"-1300 mm Oil-water separator KON-P 5 Note: Accessories are without guarantee. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on site.

Condition: used, ACME-GRIDLEY 1-5/8" RBN-8 SN: AM-40272 Mfd. 1967 Motor and Controls Stock reel and stand Chip conveyor Tooled as pictured Cross slides in 8, 1, 4, 5, Lsdozcg Aispfx Abnsac Cutoff in 6th Pos. 5th Pos. Universal Threading 7th Pos. Accelerated Reaming Spare parts and tooling Call for more information ETS to Stem .0015 End Tool Slide 6th Pos. has been milled out to accept a rotary slotting attachment. Custom made special block that end tool slide holder attaches to was using a floating reamer in that position. (Pictured) Cleaned and Painted

Condition: used, Wickman 1-3/4" 6-Spindle Laodoyzkf Hjpfx Abnjc SN: 16814 Electromagnetic Clutch Stock Reel and Stand Threading Chip Conveyor 6 Cross Slides 4th Pos. Logan Universal Threading Cleaned and Painted Recently taken out of Production Checked under power Can be equipped for your requirements

Condition: excellent (used), This system If designed to continuously cool veg products in glycol chilled water what was bought new by our customer to chill sachets of hot sauces and soups at 2500 KG per hour. Available separately or as a line with infeed and outfeed conveyors. Lasdpjh Uyg Njfx Abnsc

Condition: used, Plant from spiral freezer. Lodpfxevvm Afo Abneac

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: ITJ291580, power: 15 kW (20.39 HP), Equipment: compressed air system, compressor, type plate available, The Chicago Pneumatic CPVSD20 UL compressor is a 15 kW lubricated industrial unit, ideal for various applications requiring a working pressure of up to 10 bar. Although it is a used unit, this device is designed to deliver reliable and long-lasting performance in a demanding industrial environment. Chicago Pneumatic compressors are known for their energy efficiency and their ability to adapt to fluctuating compressed air needs, thanks to their advanced control system. The CPVSD20 UL model, in particular, offers an excellent balance between power and economy, making it a wise choice for users seeking to combine performance and reduced operating costs. Ledpfxozfzags Abneac By choosing this compressor, you benefit from a robust and proven machine, ready to be integrated into your production line or used in specific applications requiring constant pressure. It is an investment that goes hand in hand with reliability and quality, thereby ensuring uninterrupted operation for your industrial processes.

Condition: new, Ball screw drive Dm63 Stroke 630 PITCH 20MM 13:40 879/11 00000 Steinmeyer 2 units available “Partially unpacked for photography – unused item from stock clearance.” Ljdpfx Abjzgg Eqsnjac

Condition: new, Ball screw drive ø40mm, Stroke 600mm, Pitch 25mm 13:96 427/11 00000 STEINMEYER Lajdpfszgf Drjx Abnoc Partially unpacked for photography – unused item from warehouse clearance.

Condition: new, Ball screw Laodpfx Abezgf Dlsnec ground ø 63 PITCH 20MM 13:52 772/11 00000 Partially unpacked for photography – unused item from warehouse clearance.

Condition: new, Available quantity: 3 units. Ledpfx Aozgf Dfobnsac Partially unpacked for photography – unused item from warehouse clearance. Ball screw drive 5-1210-0009 D40x15 Steinmeyer

Condition: new, Available quantity: 2 units. Partially unpacked for photography – unused item from inventory clearance. Diameter: 50 mm Stroke: 600 mm Pitch: 30 mm Ratio: 13:96, 393/11 Lasdpfxszgf A Io Abnsc STEINMEYER

Condition: new, “Partially unpacked for photography – unused item from a warehouse clearance.” Laodpfx Abjzgcawjnec Ball screw drive ø 63 PITCH 15MM 13:78 966/11 00000 STEINMEYER

Condition: new, 3 units available Partially unpacked for photography – unused item from warehouse clearance Ball screw drive 10-7010-0003 D40x15 Laodpfjzgazrsx Abnec Steinmeyer

Condition: new, Partially unpacked for photography – unused item from a warehouse clearance. Ball screw drive 3426.515/25.40.920.1122 P5P Laodpfxjzgardj Abnjc (163903) STEINMEYER

Condition: new, Ball screw drive, Z-axis ø50 Stroke 630 13:51 398/11 Steinmeyer Lajdpezgaq Hsfx Abnsc NOS (New Old Stock) Partially unpacked for photography – unused item from warehouse clearance.

Condition: used, Year of construction: 2018, The Airtec ATC 7.5 Screw compressor and air dryer Laedpszf Ivuofx Abnsc Heavy-duty industrial compressor. Specifications Year 2018 Motor Power: 7.5 KW (10HP) Maximum Pressure: 8 bar Free air delivery 1.1 m3/min Tank Capacity Options: 500 Litres Power Requirements: 3-Phase Electric Pump Type: Belt-driven, cast-iron piston