Used Manometer for sale (157)

Year of construction: 2005, condition: good (used), Stationary high pressure pump unit URACA KD716-G on base frame for all cleaning and pressure testing tasks. Similar but no Hammelmann, Woma, Kamat Operating pressure: 100 bar Delivery rate: 263 l/min. Drive speed: 1.500 RPM Drive power: 46 kW with AEG 3~motor with URACA MSSV 32/150 safety and switching valve with control panel, manometer and pulsation damper. dimensions LxWxH: approx. 1900x1100x900 mm Itsdpem Uywlefx Ab Tjc Weight: approx. 1.000 kg Year of manufacture: 2005 (MSSV valve year 2015) Condition: in good used condition.

Year of construction: 2024, condition: new, Working space 1100 x 660 x 816 mm (W x D x H) Blasting chamber Iodpfx Aboh Hxubj Tjtc Dust-tight vacuum cabin in stable sheet steel construction Working gloves special rubber, wear resistant, cotton inside, firmly connected to the cabin against dust leakage Doors Blasting chamber W x D x H = 1100 x 660 x 816 mm Two side doors, dust-tight closing, double-walled, sound-absorbing foam, lockable, with electrical shut-off safety device Blasting media recovery Via coordinated MHG recovery system Operation ON/OFF switch for suction and lighting, pressure regulator, manometer and foot switch Viewing panels

Condition: new, loading space volume: 60 m³, total width: 2,550 mm, total height: 3,930 mm, Year of construction: 2026, Equipment: ABS, OMEPS Tipping Silo Semi-Trailer ---- Model: CR 60 Chassis: Two fully automatically welded I-section longitudinal beams with welded cross members, chassis width 1,400 mm, 2" kingpin, tipping cylinder: Hyva Axles and suspension: 22.5" disc brake SAF axle units, 3 x 9 t with air suspension, axle spacing 2 x 1,310 mm, raise/lower valve, loading manometer mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, first axle liftable (not equipped for tractor unit), third axle liftable with Wabco Optiturn Wheels and tires: 6 wheels with tires size 385/65 R22.5, as per manufacturer’s specification on Alcoa Dura Bright aluminum rims 11.75x22.5 ET 120 Braking system: EBS 4S/2M WABCO compressed air braking system with RSS, compliant with standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing gear: Mechanical landing legs with two speeds, 2 x 20 t static load with swivel foot, rear support with crank stands Electrical system: All lights in LED version, 24 Volt electrical system consisting of: one 15-pin socket mounted in front of the fifth wheel on the chassis carrier, amber side marker lamps as required, rear position lights, front marker lights, rear license plate lights, lamps according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps fitted at swivel joint height in aluminum holders in accordance with standard 97/28/CE-2007/35/CE, 1 LED work lamp on the tank, yellow warning beacon at rear at hose tube height, 2x reverse lamps in underrun protection, 2x reverse lamps at the level of the support legs (each switchable at the power console) Tank design: A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). One-compartment tank, 60,000 liters capacity. Tank warranty: 24 months from delivery. Operating parameters: Pressure vessel according to the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating pressure 2.0 bar, operating temperature -40° to +80° C. Filling options: 5 manholes DN 450 with hinged and folding dome covers. Each dome cover is pressure-tight sealed with 4 wing nuts, rubber support for dome cover on top for storage, rain gutter closed at the front and open at the rear Material discharge: 1 material outlet cone DN 800 made of INOX, foldable with INOX disc for aeration, material outlet cone swivels laterally, DN 150 shut-off valve with white gasket, connection: STORZ-A Air piping: A 2.5" stainless steel air manifold line mounted on the operating side RIGHT, a 4" stainless steel air distribution tube is mounted at the rear of the tank, air valves (butterfly valves) in stainless steel, top air hose and air connection hoses are 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1 m in front of the swivel bearing Itsdpfx Aox Nugdob Toc Ladder and walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety railing can be erected from below using a separate fold-up ladder piece and a parking brake when opened, 1 aluminum safety grating runs along the top left side of the tank, anti-slip coating on the tank Discharge hose storage: 4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum...

Condition: new, Year of construction: 2025, Electro-hydraulic press OMCN 100 Ton Mod. 164/R Made in Italy DOUBLE SPEED ELECTRO-HYDRAULIC PRESS AUTOMATIC, COMPLETE WITH MANOMETER Hydraulic press with rapid motor with pressure gauge and double hydraulic power pack speed obtained with vane pump for fast approach and return and with axial piston pump for the working phase. Equipped with calibration and three-position control valve (neutral return). The machine is complete with oil. Equipped with winch for lifting the worktop. The stem is made of special steel, treated and chromed. The machine is equipped with bimanual control and simultaneity as from regulations in force. Complete with protective panels, rear and side panels. CE approval complete with electromagnetic compatibility. Piston stroke : mm 310 Interior light : mm 1,010 Ijdpfx Asfh R Nyob Tstc

Condition: new, Year of construction: 2026, workpiece weight (max.): 350 kg, load capacity: 350 kg, Vacuum Lifter STEEL SYSTEM UP300 (suitable for sheet metal – for use with a plasma cutting machine) This device enables the removal of small parts from the work table, even in areas where a magnet cannot be used. Equipped with a rechargeable battery and a battery level indicator. Compatible with all lifting machinery. • DIMENSIONS: - Height: 307 mm - Width: 215 mm - Depth: 247 mm • Device weight: 12.5 kg • Lifting capacity: 250 kg • 1 DS. SYSTEM suction pad ∅250 with replaceable sealing gasket • Integrated inspection manometer • Power supply: external battery (1 included – DeWalt, Milwaukee, Makita compatible) Iedpfx Aexqaw Ujb Totc • Features an ergonomic, non-slip handle • Material dimensions: Minimum working area dimensions: 30x30 cm Material dimensions: 1×1 m See our other listings for additional equipment. We offer different machine configurations – contact us with your requirements and we will tailor the machine to your needs!

Year of construction: 2025, condition: new, Column-mounted jib crane complete with electric hoist and vacuum gripper for short-distance handling of MDF boards, laminated boards, and medium-density chipboards, etc. Gripper maximum lifting capacity: 200 kg. The equipment is brand new, illustrative photos provided. TECHNICAL DATA: Supporting structure: - Column with jib arm, maximum lifting capacity: 250 kg, RAL 9002 (grey-white color) - Arm length: 6 m - Total column height: 3 m, effective height under the arm: 2.7 m - 270° swivel range - Base plate for anchoring to industrial flooring - Positioning brake - Enclosed electrical circuit Hoist: - Brand: RWM, model 250 - Lifting speed: 4 m/min Vacuum lifter for MDF, laminated, and medium-density chipboard, maximum lifting capacity: 200 kg: - 2 vacuum suction pads, dimensions: 520x320 mm each - Manual rotation of suction pads: 0°/90° - Vacuum pump, compressed air requirement: 390 Nl/min - Pressure: 8 bar - Pressure regulation valve with manometer display Itedpjxl Htrjfx Ab Tsc - Acoustic alarm in case of pressure drop

Condition: new, Technical data: Capacity: 160 t Installation height: 1100 mm Max. working area: 1100 x 350 mm Ram stroke: 400 mm Advance speed: 6.2 mm/s Return speed: 6.8 mm/s Motor power: 5.5 kW Itsdpfxok Nz Nts Ab Toc Width: 1640 mm Depth: 1000 mm Height: 2550 mm Weight, approx.: 1300 kg Equipment: - Laterally adjustable cylinder via rack, pinion, and handwheel - Spacious working area - Height-adjustable table - Torsion-resistant design with welded steel construction - Manometer - Fine pressure adjustment - Additional hand pump Support prisms available at extra cost.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, pressing force: 40 t, table width: 1,000 mm, table length: 600 mm, 40T H-Frame Press with Ram Table • Press capacity: 6-40 T (adjustable) • Maximum installation height: 700 mm • Usable area, lower table: 1000 x 600 mm • Usable area, ram: 1000 x 600 mm • Frame type: H-frame • Guide column diameter: Ø 100 mm (4 pcs, at the corners) • Table height from floor: 800 mm • Overall dimensions approx. (W x D x H): 2,100 x 1,600 x 3,500 mm • Total weight approx.: 3,500 kg • T-slots and drill holes made to customer specification. HYDRAULIC CYLINDER: • Piston stroke: 0-500 mm (adjustable) • Cylinder diameter: Ø 140 mm (1 pc) • Piston rod diameter: Ø 80 mm (1 pc) • Max. operating pressure: 260 bar • Return speed: 90 mm/sec • Ram speed: 9 mm/sec • Idle speed: 80 mm/sec HYDRAULIC UNIT: • Hydraulic pump (brand: ASC): 67+8 L/min (1 pc) • Motor power: 4 kW (1 pc) • Pressure accuracy during pressing stroke: +/- 5 bar • Hydraulic unit is mounted at the rear upper section of the press. • Hydraulic manifold and valves by DUPLOMATIC. • Manometer for pressure display. • Air filter and oil filter brand: FILTREC. • Equipped with an electronic oil level switch. • Air cooling (cooler) is used for hydraulic cooling. • Pressure adjustable via pressure switch. • Control via sensor. • Safety cover (door) located at the rear of the press. • Safety light sensors and internal lighting included. ELECTRICAL CONNECTION: • Main supply: 400V AC • Control voltage: 24V DC • Frequency: 50 Hz • Hydraulic unit main motor connection: 4 kW • Total power supply: Approx. 6 kW CONTROL CABINET EQUIPMENT: • Protection class: IP 54 • Reserve space: 30% • Cooling: Yes (air cooling) • Internal lighting: Yes • Mode selector switch: Yes (lockable) Iedpfx Aboxrby He Tjtc • Electrical equipment brands used: SIEMENS, ALLEN BRADLEY, SICK.

Condition: new, PROTON P-V LINE  PROTON equipment offers the right solution to recovering and conveying of blast medias, powders, plastic pellets, grains, sands, aggregates and other bulk metarials in both cleanup and material transfer functions. The main type of industry using our equipments are blast cleaning companies, shipyards, tank cleaning companies, metallurgical plants and steel mills, foundries, power plants, cement industries, chemical industries etc..   Itodpfx Absghbkyj Tjc The dust in the air is collected by a Vacuum Cleaner and the grit in the Stock Silo by its separator. Especially in inaccessable or enclosed areas such as storage tanks, box girder constructions, tank internals at shipyards etc., the equipment offers great savings in time and manpower.  A PROTON Vacuum system cuts costs by reducing cleanup time and reclaiming valuable materials.  This versatile vacuum system can be used to pick up any material that will flow through a hose.  With its long reach and powerful suction, PROTON cleans out tanks, pipes. There are 2 types of stock silos, Cylindrical and Square, having 2 floors. Technical Specifications for standard machines: VC Unit’s cost-cutting power has been proven hundreds of times. In fact, most VC units pay for themselves in less than 3 months through reduced labour costs and reclaimed materials. Units are available with capacities up to twelve tons per hour, conveying distances up to 330’’(100m),and motors with 7,5 kW-90 kW (3,98m³/min-72m³/min). Performance data for air (p₁=1,0 bar, t₁=20 °C, ρ=1,2 kg/m³) The heart of the PROTON VC is a very robust AERZEN blower made in GERMANY. All sets include the following equipment: - Suction Hose (rubber-wired) - Suction Hose for connection between Vacuum Unit and Hopper - Suction Nozzle - Cam-lock and clamp Connections - Cartridge Filter (spare) - Oil for Blower (spare) - Manometer (spare) - Phase Protection Relay - all necessary fasteners

Condition: new, pressure: 60Column clearance: 900 x 300motor power: 3Speed : 8Speed : 13messurements (LxWxH): 1500 x 850 x 2450weight approx.: 700stroke: 300Standard Equipment: High-quality hydraulic press can be operated both manually and motorized. Cylinders can be shifted sideways. CE certified Pressure adjustment 1-year warranty Pressure gauge (manometer) User manual  Clearopening: 900 x 300 mm Iedpfx Asv Akw Hsb Tetc

Condition: new, pressure: 100motor power: 4messurements (LxWxH): 1.600 x 850 x 2.500oil filling: 29performance of pump: 14,5speed: Vorlauf 8,5 mm/sec, Rücklauf 13,43 mm/secweight approx.: 1.000Working Area: 1000 x 350stroke: 350Standard Equipment: Itjdpfenzwhaox Ab Toc High-quality hydraulic press can be operated both manually and motorized. Cylinders can be shifted sideways. CE certified Pressure adjustment 1-year warranty Pressure gauge (manometer) User manual (manual) Clearopening: 1000 x 350 mm

Condition: new, pressure: 80motor power: 3daylight: 900stroke: 300messurements (LxWxH): 1.650 x 850 x 2.400weight approx.: 850Cylinder: 180Speed : 7,54Speed : 10,90Standard Equipment: High-quality hydraulic press can be operated both manually and motorized. Cylinders can be shifted sideways. CE certified Pressure adjustment 1-year warranty Pressure gauge (manometer) User manual (manual) Clearopening: 900 x 300 mm Image is a sample photo Isdpfx Aeicidnsb Tetc

Condition: new, Year of construction: 2025, pressure 400 bar Itedpfx Abexqrgns Tec pressure 100 t stroke 400 mm 900 mm 1500 1/min 12 l/m 31 l quantity of oil 40 l pre-running speed 8,2 mm/sec return speed 13 mm/sec weight of the machine ca. 1100 kg height 2450 mm 900 mm 1320 mm distance between columns 1010 mm distance between columns 300 mm Integrated pressure manometer In height adjustable working table

Condition: used, empty load weight: 7,860 kg, maximum load weight: 28,140 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2022, next inspection (TÜV): 05/2026, loading space length: 15,011 mm, loading space width: 2,494 mm, loading space height: 2,734 mm, total length: 25,500 mm, total width: 40,000 mm, total height: 153,300 mm, suspension: air, tire size: 385 / 55 R 22,5, color: white, Year of construction: 2022, front tire size: 385 / 55 R 22,5, rear tire size: 385 / 55 R 22,5, brakes: other, emission class: none, Equipment: ABS, ABS, axle manufacturer Kögel, air suspension front/rear, lift and lower function, disc brakes, lashing rings, 3 x load securing rails, 2 x only in the rear area, ferry lashings, load manometer, 2 x LED reversing spotlights Iedpfxjxp A H No Ab Tetc

Condition: new, Year of construction: 2024, neu 2024 7307 prompt, Zwischenverkauf v Italien 11400 € 197.76 € 1 10300 € 100 to horizontal verschiebbar 500 mm 900 mm 1050 mm 25 mm/s 2 mm/s 2 kW Ijdpfewiqu Djx Ab Totc 1900 mm 1000 mm 2400 mm 1250 kg 650 mm STROKE 500 MM 2 speeds machine table can be liftet with chains control by handwheel and push button (2-hand) adjustable max. pressure manometer according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, Year of construction: 2024, neu 2024 7321 prompt, Zwischenverkauf v Türkei 12500 € 216.96 € 1 11300 € 150 to horizontal verschiebbar 300 mm 1570 mm 280x200 mm 5 mm/s 10 mm/s 2630 mm 1000 mm 2480 mm 2100 kg horizontal adjustable cylinder with clamping lever steel welded frame Itodpfswiqp Uox Ab Tjc stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, neu ca. 6-8 Wochen ab Auftrag Italien 12500 € 240 € 150 to Iodpfxexviu Te Ab Tstc fix 150 mm 780 mm 1000 mm 1900 mm 1200 mm 2450 (PSS: 2600) mm The table can be lifted with a chain Hydraulic unit with motor and pump Adjustable maximum pressure Manometer Equipment compliant with CE regulations. Operating instructions in German and English. MODEL VERSIONS: PSS 150 TL: 1 speed 4 mm/s, single-hand control with lever € 12.500,00 PSS 150 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 13.500,00 PSS 150NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 14.500,00 PSS 150: same as PSS 100 NC but with stroke 500 mm € 18.000,00

Condition: new, working width: 720 mm, pressing force: 30 t, stroke length: 400 mm, - Capacity 30 tons - Cylinder stroke 400 mm - Working width 720 mm - Electrically or manually operated Iedpfx Abjr Axzne Totc - Manometer - Emergency stop - 400V

Condition: new, Ideal for machining pipes, profiles, and solid materials made of stainless steel, iron, etc. in industrial applications. Technical Data: Cutting Capacity: Round 0°: 235 mm Square 0°: 200 x 200 mm Flat 0°: 280 x 190 mm Round 45° right: 190 mm Square 45° right: 170 x 170 mm Flat 45° right: 190 x 180 mm Round 60°: 120 mm Square 60°: 120 x 120 mm Flat 60°: 120 x 115 mm Round 45° left: 175 mm Iodjqbr Sujpfx Ab Tetc Square 45° left: 145 x 145 mm Stepless cutting speed: 20 - 90 m/min Saw blade: 2645 x 27 x 0.9 mm Working height, approx.: 990 mm Coolant pump: 100 W Saw motor: 1.5 kW Electrical connection: 230 V Dimensions (LxWxH), approx.: 1600 x 1100 x 1500 mm Weight, approx.: 295 kg Features: - Double mitre saw with pivoting saw frame from left -45° to right +60° - Generously dimensioned cast saw arm for low-vibration operation - Infinitely variable saw speed for optimum adjustment to the workpiece - Hydraulic lowering cylinder, infinitely adjustable - Quick-release vice for easy and fast workpiece clamping - Precise, adjustable saw band guides for optimal cutting results - CE/IEC compliant, German documentation and German service Scope of delivery: - Bi-metal saw blade - Blade tension adjustable via manometer - Carbide blade guides - Quick-release vice - Material stop - Coolant system incl. pump - Hydraulic lowering cylinder - Motor protection switch - Automatic shut-off at end of cut - Base frame

Condition: new, Robust double mitre metal bandsaw for professional use in metalworking and container fabrication, featuring hydraulic lowering of the saw bow. Technical Data: Cutting capacity: 0° round: 315 mm 0° square: 270 mm 0° rectangular: 250 x 400 mm 45° round: 280 mm 45° square: 280 mm 45° rectangular: 300 x 280 mm 60° round: 180 mm 60° square: 140 mm 60° rectangular: 140 x 180 mm -45° round: 250 mm -45° square: 220 mm -45° rectangular: 280 x 200 mm Cutting speed: 35 / 70 m/min Saw blade: 3460 x 34 x 1.1 mm Worktable height: 970 mm Motor power: 2.2 kW Coolant pump motor: 100 W Dimensions (approx.): 2270 x 970 x 1140 mm Weight (approx.): 580 kg Features: - Double mitre saw with tiltable saw bow, adjustable from left -45° to right -45° - Ideal for machining pipes, profiles, and solid materials made of stainless steel, iron, etc., in industrial applications - Generously dimensioned cast saw arm for low-vibration operation Itsdpew Hxapjfx Ab Tec - Equipped with two cutting speeds for optimal adjustment to the workpiece - Hydraulic lowering cylinder - Quick-release vice for fast and easy clamping of the workpiece - Precise, adjustable blade guides for optimal cutting results - CE/IEC compliant, German documentation and German service Scope of delivery: - Bimetal saw blade 3460 x 34 x 1.1 mm - Blade tension adjustable via manometer - Carbide blade guides - Quick-release vice - Material stop - Coolant system with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic shutdown at end of cut - Base frame

Condition: used, Auslauf NW 50 oben Druck Manometer mit Auslauf Optional : div. Armaturen Itsdpfx Aboxytwms Tec Anzahl verfügbar (Angebot pro Stk.): 11

Condition: good (used), Code: 0158 Brand: ITALPRESSE Model: LOCK FORM SYSTEM AIR - CE Standard Hydraulic air membrane press with loading and unloading - CE Standard Itsdopvk Dispfx Ab Tsc 3-D coated on one face lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2650 x 1250 Piece height mm 55 Pressure control manometer Automatic pressure reset Opening timer

Condition: good (used), Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Iodjpbvqvspfx Ab Tetc Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, filter area: 0.283 m², Nutsche Pressure Filter Vacuum Filter Pressure Nutsche Year of manufacture: 2009 Condition: Used Availability: In stock Documentation: Complete set available Model designation: Pressure Filter Nutsche Vacuum Filter Suction Filter, 62 litre capacity Operational: Yes Filter area: 0.283 m² Material: Stainless steel 1.4404 Total heating/cooling chamber volume (L): 10 Weight (kg): 204 Iodpjxxxqvsfx Ab Tstc Total vessel capacity (L): 62 Permissible operating temperature vessel (°C): -20/+150 Permissible operating pressure vessel (bar): -1/+6 Permissible operating pressure heating (bar): -1/+6 Permissible operating temperature heating (°C): -20/+150 Design overpressure (bar): 11.5 Support structure: Standing on feet Heating material: 1.4404 Country of manufacture: Switzerland Accessories & fittings: Manometer, safety relief valve, sight glass, ball valve, Camlock coupling, lid opening aid

Condition: used, maximum load weight: 38,080 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 02/2025, next inspection (TÜV): 02/2026, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full specifications available upon request. Loading Platform: * Extending loading platform with pneumatically operated locking mechanism * Loading platform with approx. 30 mm thick wooden floor framed in omega profiles * 7 pairs of folding external lashing rings (LC 5,000 daN) * 3 pairs of folding external lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching tension belts (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension * All axles hydro-mechanically forced-steered * Equipped with disc brakes * Technical axle load: 10,000 kg each (ET 0) * Air suspension with lift and lower valve * Axle tools Tyres: * Tyres: 385/65 R 22.5 Braking System: * Braking system according to EU regulations with EBS-E (2S2M), without connecting lines to the tractor Warning Signs: * Mountings on the gooseneck and rear panel left and right for warning signs, including socket Electrical System: * Electrical system according to EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connection strip with sockets 24N, 24S & 15-pin, connection according to ISO 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel Construction: * Steel structure made of high-strength fine-grained steels * Steel grades S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Iedoxf Sifjpfx Ab Tstc Paintwork: * First-class, durable corrosion protection for the standard grit-blasted welded frame, guaranteed by a two-component zinc dust primer * High-quality, single-colour two-component topcoat in RAL 3002 carmine red * Rims in silver, add-on parts as per manufacturer's choice * Rear section metallized and painted in RAL 9010 pure white Included Accessories: * 2-inch kingpin * 4 wheel chocks with brackets on the front wall * Remote steering, front and rear, cable-operated by push buttons, with single-track control of the axles (without installation in the tractor) * Manual and description on USB stick * Electro-hydraulic unit * Galvanized connection strip at front, yellow-red air couplings * Yellow reflective tape according to EU regulations on the sides, extension and rear of the trailer * European reflective panels (red-yellow) on the rear of the trailer * One mud flap at the rear of the trailer * Mounting for rotating beacon at the rear of the trailer * 10 pairs of pocket sockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading platform * 1 spare wheel holder under the platform on the right-hand side * Speed stickers 80 km/h on the rear and on both sides * Load manometer for determining axle loads including load chart * Galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets in the platform for: 1 x 20' container, 2 x 20' container or 1 x 40' container; an additional locking point is provided in the extension for a 45' container * 4 pairs of transverse stanchion strip pockets for plug-in stanchions approx. 100 x 50 mm * Storage for plug-in stanchions on the inside of the front wall * Access ladder installed on both left and right side in the direction of travel * One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted under the loading platform at the front left in the direction of travel * One add