Used Mill Turn for sale (15,741)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, turning length: 810 mm, turning diameter over cross slide: 800 mm, turning diameter: 320 mm, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 810 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 6,000 rpm, CNC FANUC MSX-701 / MAPPS IV CAPACITY Swing diameter over bed: mm 800 Dodpjwlvlgjfx Afnsun Swing diameter over cross slide: mm 800 Maximum turning diameter: mm 320 Standard turning diameter: mm 200 Maximum distance between the center: mm 1.130 Maximum turning length: mm 810 Maximum workpiece size: mm 300 TRAVELS X axis turret 1 and 2: mm 210 Y axis turret 1 and 2: mm +65 / -45 Z axis turret 1 and 2: mm 810 B axis headstock 2: mm 920 MAIN SPINDLE Maximum speed: rpm 5.000 Drive power (30 min / continuous operation): kW 25/22 Maximum bar diameter: mm 65 Spindle bore: mm 73 Spindle diameter in front bearing: mm 120 Spindle mount: JIS A2-6 C-axis resolution: degrees 0,001 SUB SPINDLE Maximum speed: rpm 5.000 Drive power (30 min / continuous operation): kW 25/22 Maximum bar diameter: mm 65 Spindle bore: mm 73 Spindle diameter in front bearing: mm 120 Spindle mount: JIS A2-6 C-axis resolution: degrees 0,001 FEED DRIVES Rapid traverse turret 1 X/Y/Z: m/min 30/20/50 Rapid traverse turret 2 X/Y/Z: m/min 30/20/50 TOOL TURRET Number of turrets: 2 Number of tool stations per turret: 16 Shaft cross – section for turning tools: mm 20 x 20 Maximum shaft diameter for boring bars: mm 32 Turret switching time (1 station): s 0,18 Maximum speed of the driven tools: rpm 6.000 Drive power for driven tools (5 min/continuous operation): kW 7,5/5,5 DIMENSIONS Installation area with chip conveyor: mm 5.120 x 2.720 Net weight: kg 8.300 Macchina equipped with: • High pressure cooling system • Bar loader interface • Gantry-type piece unloading arm • Cutting effort management system and load monitor • No. 1 double radial motorized tool holder • No. 3 axial motorized tool holders • No. 2 external tool holders • No. 2 double boring bar holders • No. 2 single radial motorized tool holders • No. 2 internal boring bar holders • No. 2 Kitagawa BD 208 self-centering chucks diam. Mm 210 • No. 1 set of jaws for each self-centering chuck • Instruction manuals and CE declaration

Condition: ready for operation (used), Year of construction: 2008, turning length: 1,500 mm, turning diameter: 710 mm, rotational speed (max.): 3,800 rpm, CNC OSP200L C axis, milling spindle Dusdpfx Afoyfwgqenjn 25-tool changer capacity 1500x710 mm

Condition: excellent (used), Year of construction: 2014, operating hours: 14,500 h, functionality: fully functional, machine/vehicle number: 11779, turning length: 700 mm, turning diameter: 250 mm, spindle motor power: 26,000 W, spindle speed (min.): 3,200 rpm, spindle speed (max.): 3,200 rpm, spindle bore: 65 mm, overall weight: 8,500 kg, incl. 2x Hainbuch/Ortlieb chucks, conveyor belt, swiveling measuring probe with 2 heads, MANUAL GUIDE_dialog programming, high-pressure pump 18 bar/20 l/min, SBS tool breakage monitoring and wear control. Machine year 2013 – Commissioned 05/2014 Good & well-maintained condition Original price approx. €300,000 Duedpfx Aordy Uqofnjn !!! ATTENTION -> Sale without loader!!!

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, turning length: 2,125 mm, turning diameter over cross slide: 580 mm, turning diameter: 420 mm, spindle motor power: 25 W, spindle bore: 102 mm, travel distance X-axis: 293 mm, travel distance Y-axis: 130 mm, travel distance Z-axis: 2,190 mm, mount diameter: 315 mm, For sale: DOOSAN PUMA 3100XLY turning center from 2013. Technical data: Max turning diameter: 420mm Max turning length: 2125mm Axis travels X/Y/Z: 293 / 130 / 2190mm Duedpfxjyhv N Nj Afnsn Chuck size: 315mm (12'') Spindle bore: 102mm Max spindle speed: 2800rpm Spindle type: Electro-spindle Number of turret stations: 12 Max driven tool speed: 5000rpm Head type: BMT65 Machine weight: approx. 11,000kg Machine equipped with SMW SLU3 self-centering steady rest - 45-165mm Control system: Fanuc with Manual Guide Machine in continuous operation. Inspection and testing possible. Both static and driven tool holders included.

Condition: excellent (used), Year of construction: 2017, Lathe Huron AX 300 MY Travel ranges: XYZC 250/ + - 40/625 mm Y: +/- 40 mm 12-position BMT 55 turret Spindle speed: 4000 rpm Power chuck: 250 mm Spindle bore: 65 mm Tailstock Chip conveyor Siemens 828 D control Dusdpfewyp Azox Afnon

Condition: excellent (used), Year of construction: 2018, operating hours: 26,811 h, functionality: fully functional, machine/vehicle number: -, turning length: 1,350 mm, turning diameter over cross slide: 715 mm, turning diameter: 550 mm, spindle motor power: 48 W, spindle speed (max.): 3,000 rpm, spindle bore: 106 mm, travel distance X-axis: 380 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 1,350 mm, mount diameter: 12 mm, total height: 2,346 mm, total length: 4,088 mm, total width: 2,129 mm, swing diameter over bed slide: 950 mm, overall weight: 10,400 kg, High specification machine with Fanuc 32iTB control. Many options including SMW Autoblok steady rest on programable Servo base, coolant through steady, high pressure coolant, enlarged left hand door to allow 920 mm swing workpiece (950 mm max). Various other options. New cost in 2018 over £200k. Djdpfx Ajvz Ab Uefnoun

Condition: good (used), Year of construction: 2004, turning length: 2,000 mm, Model: E-650H Control: Mazatrol 640M Pro Year: 2004 Distance Between Centres: 2000mm Dodpfjxvyq Eex Afnsun Swing Over Bed: 905mm Machine With: C Axis Y Axis Live Tooling/Milling B Axis 800mm Power Chuck Manual Steady 375mm Open Steady 600mm Air Filer Mist

Condition: good (used), Year of construction: 2011, functionality: fully functional, Available immediately and can be viewed under power. Duedpfxjycl Eps Afnjn Upper X Y Z ballscrews fully refurbished mid 2023 by UK company. Included as shown in pictures -- Capto C4 milling -- Capto C4 turning holders -- Capto C4 extensions -- 3 x Dual Capto C4 for turret -- Various other turret holders as pictured -- See attached spreadsheet (PDF below), for included holders. -- Renishaw arm -- Part catcher arm + converyor (not used for a long time) -- Old version of CAMplete TurnMill with USB dongle TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Spindle nose : A2-5 - Spindle power : 11 [kW] - Spindle speeds : 4500 [rpm] - Max. bar diameter : 65 [mm] - Max. turning diameter : 200 [mm] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Spindle nose : A2-5 - Spindle power : 11 [kW] - Spindle speeds : 5000 [rpm] - Max. bar diameter : 51 [mm] - Max. turning diameter : 200 [mm] - C axis indexing precision : 0,001 [°] - Travel : 780 [mm] - Spindle / counter-spindle distance : 980 [mm] TURNING-MILLING SPINDLE - X/Z stroke : 570/1297 [mm] - Y stroke : +/- 100 [mm] - B Axis stroke : 190 (+/-95) [°] - Tool type : Capto C4 - Spindle speeds : 12000 [rpm] - Spindle power : 7,5 [kW]

Condition: reconditioned (used), Year of construction: 2005, Cycle-controlled lathe GILDEMEISTER NEF 520 With MANUAL PLUS 4110 control Year of manufacture: 2005 Spindle bore: 70 mm Center distance: 1000 mm O rotation over bed: 500 mm O rotation over cross slide: 290 mm Center height: 250 mm Speed range: 10 - 3050 rpm infinitely variable With the following accessories: Sliding guard with interior lighting 8-station Sauter VDI 30 turret with driven tools 10 pcs. VDI 30 tool holders 2 pcs. driven tools VDI 30 Coolant device 3 jaw chucks SCHUNK ROTA 0 250 mm ICP contour programming Tailstock with extendable drilling quill Chip tray Dedeuda Tnopfx Afnoun Operating instructions

Condition: good (used), Year of construction: 2018, functionality: fully functional, The machine is in good technical condition, testing can be arranged by prior agreement. Dodoyg Sh Sepfx Afneun

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, MAIN SPINDLE: Spindle nose: A2-8 Main spindle drive power: 18.5 kW Max. main spindle speed: 4,000 rpm Max. spindle bore: 80 mm Max. machinable diameter: 366 mm C-axis 0.001 degree TURRET: Number of positions: 12 pcs. Number of driven tools: 12 pcs. Travel X/Z axis: 280 / 785 mm Dsdpfx Afjx Rvgzjneun Travel Y axis: +/- 50 mm Max. speed driven tools: 6,000 rpm Power driven tools: 5.5 kW TAILSTOCK: Taper: MT5 Distance between centers: 705 mm ELECTRICAL SUPPLY: Total drive: 39 kVA WEIGHT AND DIMENSIONS: Space requirements: 3,800 x 2,143 mm Machine height: 2,232 mm Machine weight: 6,100 kg ACCESSORIES: Control: MORI MSX-850 II Tool measuring device Parts removal Chip conveyor Coolant tank Tool holders and driven tools

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, We offer you: Manufacturer: DMG Gildemeister Model: GMX 250 linear Duodpfx Afeyfmibenon Year of manufacture: 2006 Control: Siemens 840 D powerline Technical Data: Max. turning diameter: 640 mm Turning length: 1,185 mm Draw tube inner diameter: 67 mm Travels: x1-axis: 550 mm y-axis: +/- 90 mm z1-axis: 1,185 mm b-axis: +/- 120° x2-axis: 180 mm z2-axis: 1,050 mm Main spindle: Max. speed: 5,000 rpm Drive power: 21/28 kW Counter spindle: Max. speed: 5,000 rpm Drive power: 21/28 kW Milling spindle: Speed range: 0 – 12,000 rpm Indexing: 1° Tool holder: HSK63A Number of tool pockets: 46 positions Turret: Number of tool holders: 12 positions Holder: 40 mm Hollow clamping device: Ø 67 mm Operating hours: approx. 92,100 h Spindle hours: approx. 47,800 h Technical features and accessories: - Main and counter spindles ISM 76 - C-axis and spindle brake, hydraulic - B-axis interpolating and with hydraulic clamping - Tool magazine with 4 additional loading stations - Absolute, direct measuring systems on all linear axes - Coolant tank 600 l with lifting pump and level regulator - Coolant filtration with belt filter, coolant pump 8 bar, 20 l/min - Chip conveyor - Preparation for work area extraction - USB and Ethernet interfaces - Tool monitoring system, manufacturer Artis, type CTM - Star turret with driven tools, including direct measuring systems - Counter spindle with partial hollow clamping device, C-axis and spindle brake (hydraulic), holding brake and direct measuring system - Automatic sliding safety door - Coolant spray gun - Electrical cabinet lighting and socket outlet - Signal lamp, 4 colors - Tailstock function for the counter spindle - 2x three-jaw power chucks, manufacturer Forkardt 30QLC 250-72 - Turret-mounted steady rest, range 8 – 101 mm Accessories, tools, and clamping devices shown only included if specified in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, We offer you the following: Manufacturer: DMG Mori Model: NTX 2000/1500 2nd Gen Year of manufacture: 2020 Duodpfx Afeyfl N Tensn Control: Celos Fanuc F31iB5, Mapps 4 Technical Data: Maximum turning diameter: 670 mm Turning length: 1,538 mm Bar capacity: max. 65 mm Travel axes: X1 axis: 675 mm Y axis: ±150 mm Z1 axis: 1,562 + 164 mm B axis: ±120° A axis: 1,542 mm X2 axis: 200 mm Y2 axis: ±40 mm Z2 axis: 1,542 mm Main spindle: Maximum spindle speed: 5,000 rpm Drive power: 15/15/11 kW Torque: 421/302/256 Nm Spindle nose: JIS A2-6 Spindle bore: Ø 73 mm Counter spindle: Maximum spindle speed: 5,000 rpm Drive power: 15/15/11 kW Torque: 421/302/256 Nm Spindle nose: JIS A2-6 Spindle bore: Ø 73 mm Milling spindle: Speed range: 0–12,000 rpm Drive power: 28/23 kW Tool holder: Capto C6 Number of tool positions: 76 Max. tool diameter: Ø 70/Ø 130 mm Max. tool length: 400 mm Max. tool weight: 8 kg Turret: No. of tool holders: 12 Speed of driven tools: 12,000 rpm Square tool shank length: 20 mm Boring bar shank diameter: Ø 32 mm Drive power: 5.5/5.5/3.7 kW Torque: 16.9/13.1/8 Nm Rapid traverse: X axis: 50 m/min Y axis: 40 m/min Z axis: 50 m/min A axis: 36 m/min X2 axis: 25 m/min Y2 axis: 18 m/min Z2 axis: 40 m/min B axis: 100 rpm Through-bore clamping device: Ø 67 mm Operating hours: approx. 15,050 h Spindle hours: approx. 4,210 h Technical features and accessories: - Kitagawa 8-inch through-bore chuck BB208A621 Ø 210 mm on main and counter spindle - Dual foot switch for spindle 1 and spindle 2 - Chuck cylinder stroke monitoring (linear position monitoring) for spindle 1 and spindle 2 - Full indexing of the tool spindle - Turret tailstock function - Suitable coolant: water-soluble coolant - Chip conveyor - Hydrajet MS30-1000/70 bar coolant system - Coolant chiller - Air blast device for chuck (spindle 2) - Interface for mist extractor - Manual tool presetting device installed on the machine (removable, spindle 1 and spindle 2) - Fully closed control loops for X, Y, and Z axes (tool spindle) - In-machine workpiece measuring system, Renishaw RMP600 - 4-color signal tower - Multi-dry filter - Voltage: 380 V, Frequency: 50 Hz - Alternating spindle speed - Prepared for 3D quickSET - Open pocket and island milling - High-speed fixed cycle - X-axis direction, JIS/ISO-compliant - 3D machine model - Transformer Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specifically stated in the additional information. Technical data and specifications are subject to change and errors. Prior sale reserved!

Condition: excellent (used), Year of construction: 2020, This CMZ TTL-52-52-T1Y-T2Y is a twin-spindle/twin-turret CNC turning and machining center with extensive Y-axis functionality, designed for medium-sized turned workpieces up to Ø 220 mm and with significant travel in X, Y, and Z. It supports simultaneous machining with multiple tools and features a robust construction for high-production environments. This machine is in excellent condition and has ca 8200 actual spindle hours. Cnc control Fanuc Series 31i-Model B Djdpfsydd Tzex Afnoun Maximum turning capacity Ø 220 mm (turntable) Max. Permissible swing diameter Ø 240 mm Turning length (between centers) 800 mm X1/X2 axis travel 167.5 mm X3 axis travel (sub-spindle) +120/–120 mm Z1/Z2 axis travel 515 mm Z3 axis sub-spindle travel 580 mm Maximum spindle speed (main/sub) 4,500 rpm Spindle bearing outer diameter 150 mm Spindle bearing inner diameter 100 mm Spindle nose (main and sub-spindle): ASA 6” (A2) X-as 30 m/min Z-as 30 m/min Y-as 20 m/min Including: Coolant through right spindle Tailstock in right spindle (Short Version) Removable tool presetter Side exit chip conveyor Irco Breuning SIMAG 50.1-R-3000 bar feeder (Y2012) AR Filtrazioni mist collector Large set (ca 50) HAINBUCH chucks Full options list in the attached document. Viewing possible upon appointment. Immediately available for delivery. Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: used, Year of construction: 2019, travel -x axis 900 mm travel -y axis 200 mm travel -z axis 800 mm B-axis swival range ° positioning accuracy C: 9 '' control SIEMENS number of spindle speeds 0 - 6.000 CNC turning and milling center vertical | PITTLER - PV 315 The machine is in very good condition. Technical data of the machine will follow soon. We ask for your understanding ! Dodpfxjx Szmve Afnsun - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: PV315 | PV-315

Condition: used, Year of construction: 2019, chuck diameter 500 mm swing diameter over bed slide 700 mm control Siemens travel -x axis 630 mm travel -z axis 500 mm CNC turning and milling center vertical | EMAG - VMC 450 MT The machine is in very good condition. Dedpfxox Szlrj Afnoun Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VMC450MT | VMC 450MT | VMC-450 | VMC-450MT

Condition: good (used), Year of construction: 1995, Centre Height: 330 mm Centre Distance: 2,000 mm Working Area: Max. Swing Diameter over Bed Cover: 650 mm Max. Swing Diameter over Cross Slide: 360 mm Main Spindle: Spindle Diameter at Front Bearing: 140 mm Spindle Bore: 107 mm Main Drive: 58.5 kW Dodjx Sx Htopfx Afnsun 2-step Speed Range: 4 – 750 rpm / 750 – 3,060 rpm Feed Drive: Rapid Traverse X/Z Axis: 10/10 m/min Tool Turret: Number of Tool Stations: 12 Of which Driven Tool Stations: 6 Tool Shank Holder: VDI 50 mm Dimensions / Weight: Footprint (L x W x H): approx. 6,400 x 2,150 x 2,000 mm Weight: 9,400 kg Accessories / Special Features: • CNC path control HEIDENHAIN TurnPlus EP 90 with color display • Spindle orientation, C-axis • 12-station turret, VDI 50, including 6 driven tools in turret, brand SAUTER, DIN 5482 B 20x17, max. speed 3,000 rpm • Hydraulic 3-jaw chuck, Ø 315 mm, with various chuck jaws • Hydraulic tailstock with drag device • Hydraulic quill actuation • LTA make air extraction system • Various VDI 50 tool holders • CE compliant In 08 / 2025, the following parts were replaced by GILDEMEISTER service: 1 servo motor, 1 AC servo controller inverter power module for 2 axes, 1 Simodrive power module, 1 single regeneration module, 1 control insert for 1 axis, 1 control module for 2 axes of the inverter servo drive, 1 Simodrive power module for 1-axis motor. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Chip conveyor High-pressure pump Parts catcher Bar feeder interface Tooling Dedpfx Ajyf Dtqofnsun

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Options: Chip conveyor Bar feeder interface Dodpsyf A Nwofx Afnoun Parts catcher 15 bar coolant system 3-jaw chuck KNCS N 260 36-tool magazine CAPTO C6

Condition: used, Year of construction: 2004, max. working diameter 610 mm max. working lenght 1.522 mm travel -x axis 740 mm travel -y axis 410 mm travel -z axis 1.838 mm control MAZATROL Fusion 640M Pro b-axis 240 ° c-axis 360 ° number of spindle speeds 4.000 U/min spindle bore 88 mm milling spindle turning speed range 12.000 U/min numbers of positions in the tool changer 80 CNC Turning- and Milling Center | MAZAK - INTEGREX E-410H The machine is in a well-maintained condition and can be inspected under power at any time in the factory location. The machine video from the production plant will be shared on request. Dedpfx Asx Avr Ssfnoun - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: INTEGREXE41H | INTEGREX 410H | INTEGREX-E410 H

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 17004A, bar diameter (max.): 20 mm, For sale: two fully operational Tsugami HS20M 5-axis machines. Everything is in working order, recently serviced and technically inspected. Dujdpfx Aoyghcrjfnen Included: various tool holders, full technical documentation. These machines were primarily used for manufacturing dental implants and were purchased from Sweden. If interested, please contact me for more details, photos, price, or to arrange an inspection. Price per unit: €40,000.

Condition: excellent (used), Year of construction: 1998, Machine in very good condition. Dodpfx Aswq Rwnsfnoun It has worked to the end, now it is on warehouse not connected to power. Machine in 100% completed Parts conveyor, chips conveyor, available. Spindels bore 42 mm 2x 3 jaws chuck 160 mm 2x Hainbuch collets chuck 42 mm

Condition: used, Year of construction: 2011, operating hours: 4,598 h, functionality: fully functional, machine/vehicle number: 3087698, turning length: 806 mm, turning diameter over cross slide: 584 mm, turning diameter: 457 mm, spindle motor power: 22,000 W, spindle speed (max.): 6,000 rpm, travel distance X-axis: 318 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 584 mm, rotational speed (max.): 4,800 rpm, rotational speed (min.): 4,500 rpm, type of input current: three-phase, We offer this used Haas DS-30Y CNC turning and milling center, year of manufacture 2011. Dedjycwbpopfx Afnjun Voltage: 360-480 V Phase: 3 Frequency: 50/60 Hz Full load current: 40 A Maximum current: 70 A Short-circuit interrupting capacity: 10,000 A Symmetrical short-circuit current: 5,000 A If you have any questions or need more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2008, Saeilo Contur TSL 500, year of manufacture 2008, Siemens 810 D control with Shop Turn, traverse X/Z 270/905 mm, 12-position turret VDI 40, live tooling, C axis, tailstock, turning length 750 mm, max. turning diameter 400 mm, spindle speed up to 3,000 rpm, three-jaw chuck, protective window with damage, drive belt should be replaced, powered on and ready for demonstration in production. Djdpfxsydln Te Afnoun

Condition: good (used), Year of construction: 2001, functionality: fully functional, turning length: 555 mm, Nakamura-Tome WT-250 Year of manufacture: 2001 Control: Fanuc 18 IT INCLUDED: LOADING SYSTEM (bar feeder for a maximum bar length of 6m) and UNLOADING SYSTEM (for a maximum bar length of 2m) NEW CHIP CONVEYOR (10/2021) LIFTER OVERHAUL (09/2020) Machine Equipment ▪ Bar feeder – max. bar length 6m Max. load length 6200 mm 8 channels with channel diameters Ø 22 mm, Ø 27 mm, Ø 32 mm, Ø 37 mm, Ø 42 mm, Ø 47 mm, Ø 57 mm, Ø 67 mm Includes 8 pusher rods with pusher rod cones Intermediate sizes can also be loaded Dedpfsyc Uknex Afnoun ▪ Unloading magazine – max. bar length 2m ▪ Coolant tank ▪ Chip conveyor – new as of 10/2021 ▪ Last loader overhaul in 09/2020 – channel replacement, replacement of various bearings, replacement of pusher rods and spindle liner tubes, including maintenance Technical Details ▪ Main spindle power: 18.5 kW / 15 kW ▪ Sub spindle power: 11 kW / 7.5 kW ▪ Main spindle torque: approx. 200 Nm Data sheet: 10-13 kgfm = 100 Nm – 125 Nm ▪ Sub spindle torque: approx. 100 Nm, data sheet: 7.3-10 kgfm = 100 Nm -125 Nm ▪ Spindle speed: 59-4500 rpm ▪ Bar capacity (main spindle): 65 mm ▪ Bar capacity (sub spindle): 51 mm ▪ Axis configuration: X both turrets, Y upper turret only, Z both turrets, C both spindles ▪ Travel X1 / X2: 195 mm Y: ± 41 mm Z: 600 mm ▪ Spindle nose (main spindle): A 2-6 ▪ Spindle nose (sub spindle): A 2-5 ▪ Max. workpiece diameter: 250 mm ▪ Max. turning length: 555 mm ▪ Number of tool stations: upper turret 12, lower turret 12 All stations can be equipped with driven tools ▪ Feed power X1 / X2 and Y: 1 kW ▪ Feed power Z1 / Z2: 2.1 kW ▪ Machine dimensions (LxW): 4.5m x 2.6m ▪ Magazine dimensions (LxW): 7.0m x 1.5m ▪ Unloader dimensions (LxW): 6.0m x 1.5m