Used Nitrogen Generator for sale (11,279)

Condition: ready for operation (used), Boiler plant for production of steam. Capacity : up to 12 MW Production capacity 16 ton per hour at 20 bar steam. Working pressure : From 5 bar to 20 bar Ljdpsy Av Rdofx Abnjac Steam temp 215 degrees C Designed for solid fuel like, wood chips, sawdust, bark

Year of construction: 2012, operating hours: 10 h, condition: like new (used), functionality: limited functionality, The generator was involved in the development of a vertical wind turbine and, due to the termination of the project, has very few operating hours. The control cabinets were assembled in Offenburg. Lajdpfx Aboyl Nntsnec

Year of construction: 2018, condition: ready for operation (used), operating temperature: 950 °C, ambient temperature (max.): 70 °C, nominal flow rate: 40 m³/h, overpressure (max.): 0.2 bar, machine/vehicle number: 220173941, TECHNICAL DETAILS Laedpfx Ajzddb Eobnoc Maximum overpressure in the pipes: 0.2 bar Maximum operating temperature in the pipes: 950°C Maximum ambient temperature: 70°C Pipe volume: 40 l EQUIPMENT Dew point or cp control Soot filter in duplex version Fully automatic power control in the range of 50-100%

Condition: used, Little used Proton OnSite C20 electrolytic hydrogen generation system made in 2018. The system was installed and tested but never put into operation due to owner dropping the project. Ledezcwkkopfx Abnsac Key information includes: - Capacity: 20 Nm3/h, 760 SCFH, 359 SLPM, 43.3 kg/24 hours. - Purity: 99.9998%, water vapour

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm Ledpsruakgofx Abnoac 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Lodpfx Aoxaqa Sebnsac Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Index Plate Geneva Cam Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available Specifications: Minimum Outside Cone Distance: 2.75" Maximum Cone Distance: 10" Maximum Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 Deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 15.6 to 87.7 RPM Feeds (seconds/tooth): 5 to 34.3 Main Motor: 10hp, 1800 rpm Hydraulic Motor: 7.5hp, 1800 rpm Ledpfjxdfazex Abnjac Approximate Floor Space: 118" x 86.5" Needed Overall Height: 70" Approximate Net Weight: 18,820 lbs Shipping Weight Boxed for Export: 20,500 lbs

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Lsdpfjxdfa Usx Abneac Stock Divider Hydraulic Work Clamping Chip Conveyor Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Lsdpfxertryks Abnsac Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: good (used), Wanson steam generator from meat factory which closed in 2016. 698 Kw. Further details are on the plates shown in the photographs. Lasdpfxoi Uli Ee Abnoc

Condition: good (used), Ultrasonic sensor, ultrasonic sensor, ultrasonic generator, ultrasonic generator Laodpfoxxkbajx Abnsc Manufacturer: MS, Ultrasonic welding generator -Type: SoniGEN 35/1000 or similar, unfortunately no exact designation -Power output: kVA -Dimensions: 460/150/H150 mm -Weight: 5.5 kg

Condition: excellent (used), GH Induction Type: 30 SMBC Transistor generator for inductive heating Lajdszdp H Sopfx Abnjc Medium frequency with a series resonant circuit The SMBC generator series retains the traditional advantages of the Transithermic family of generators (high reliability, easy operation, and high efficiency) in a series resonant circuit and a compact design, with cooling integrated into the generator cabinet. Rittal generator cabinet and GH Induction TC150/2 resonant circuit Voltage 400V, Frequency 50 Hz, Current 56 A, Power 37.5 kVA In like-new condition! Scope of supply: Transistor generator, Rittal generator cabinet with cooling, and TC150/2 resonant circuit (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Year of construction: 2003, operating hours: 200 h, functionality: fully functional, fuel type: diesel, color: blue, power: 80 kW (108.77 HP), output voltage: 400 V, output frequency: 50 Hz, nominal power: 80 kW (108.77 HP), nominal power (apparent): 100 kVA, continuous power (apparent): 100 kVA, Used Diesel Generator – Volvo Penta TAD 520 GE | 100 kVA / 80 kW | Enclosed Technical Specifications: Brand: SES (Scandinavian Engineering Systems A/S) Laedpfx Abewzimconec Engine Model: Volvo Penta TAD 520 GE Power Output: 100 kVA / 80 kW Voltage: 400/231 V Frequency: 50 Hz RPM:1500 Year of Manufacture: 2003 Enclosure: Yes (Soundproof cabinet included – see photos) Cooling: Water-cooled Control Panel: Integrated Condition: Used, in good working order Additional Information: Engine rated at 102 kW PRP (Prime Rated Power): 94.0 kW Alternator type: UC 274 D Fully enclosed cabinet – suitable for outdoor installation Regularly maintained Ready for inspection and immediate dispatch Photos available upon request.

Condition: ready for operation (used), Fuji Electric GGG 3226 A Motor, Serial No.: M6091630Y2, with TG-21 Tachometer Generator, used, in good condition, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Lasdpfx Asy U Ef Isbnec

Condition: ready for operation (used), Control panel for OKK MCV-500 machine with Fanuc A860-0200-T021 pulse generator, used, good condition, fully functional, scope of delivery as shown in the photos. Lasdpfxsy Rci Ns Abnsc

Condition: used, Year of construction: 2022, operating hours: 1 h, machine/vehicle number: CAT00C71CGTY01550, fuel type: diesel, motor manufacturer: Caterpillar C7.1, General information Field of application: Construction Weights Empty weight: 1.918 kg Functional Generator capacity: 150 kVA Dimensions of cargo space: 352 x 113 x 181 cm Other information Fuel consumption: 24.9 Liter/Hour at 75% Load Generator: Caterpillar LC 3114H Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 349 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery Lsdpfxszf Un De Abneac - Control Panel - Steel canopy - Tank = Remarks = New unused surplus 2022 generator

Condition: new, Year of construction: 2025, machine/vehicle number: CAT00C13K2W900259, fuel type: diesel, motor manufacturer: Caterpillar C13, General information Field of application: Construction Weights Empty weight: 4.667 kg Laodpjy T Uwdsfx Abnoc Functional Generator capacity: 400 kVA Dimensions of cargo space: 493 x 162 x 222 cm CE mark: yes Other information Fuel consumption: 61.9 Liter / Hour at 75% Load Generator: Caterpillar SR500 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 800 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2023, operating hours: 1 h, functionality: fully functional, overall weight: 320 kg, fuel type: diesel, tank capacity: 30 l, color: green, output current: 39 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 9.9 kW (13.46 HP), nominal power (apparent): 13 kVA, continuous power: 10 kW (13.60 HP), continuous power (apparent): 11 kVA, total length: 1,360 mm, total width: 650 mm, total height: 980 mm, rotational speed (max.): 3,000 rpm, motor manufacturer: China, type of cooling: water, Energy Generator T1200FULL Dealer of ENERGY Power for life The Energy 13.2 kVA Generator T12000FULL diesel generator is available for sale at Van Delft Staal / Aggregaat.store, designed to provide a stable power supply during any power outage. The T12000FULL is equipped with AVR technology (Automatic Voltage Regulation), ensuring the voltage remains constant at all times, making it ideal for connecting sensitive equipment. An optional ATS (Automatic Transfer Switch) is also available for off-grid systems and automatic switching during power outages. This diesel generator operates quietly, efficiently, and is built for long-term reliability, exactly what you would expect from Van Delft Staal/Aggregaat.store. Key advantages: Power: 13.2 kVA / 10.6 kW Power: 9.9 kVA / 7.9 kW Sockets: 230V-16A and 400V-32A 3000 rpm AVR system for stable voltage Predisposition for ATS: Prepared for ATS (Automatic Transfer Switch). This means the unit is already wired or equipped with the necessary connections to install an external switch. Quiet, fuel-efficient, and easy to maintain Perfect as a generator during power outages. We ensure all generators are ready to start and operate. In stock. Lasdpfx Aoy S Tq Tjbnec

Condition: used, Model CES-LT-LIN-9x0.66-PODB-SH suitable for nitrogen all stainless steel belt width ± 660 mm nett belt length 9.000 mm total length ± 10.500 mm dimensions (l x w x h) : ± 10.500 x 1.431 x 2.230 mm 12 kW product height: max. ± 120 mm Lajdpfxjzbqvws Abnec

Condition: used, Freshline freezer MP Type IQF 1220.15/3070 suitable for nitrogen all stainless steel product height: max. ± 100 mm capacity: ± 5.000 kg / h product load (kg/running meter): ± 13-14 kg / running meter 400/460V, 50/60Hz, 3PH+PE, 110A, 32kW Pneumatic: 1Nm3/h at 5-7barg LIN pressure nitrogen 3barg net belt width ± 1.220 mm net belt length ± 16.800 mm dimensions (l x w x h) : ± 17.700 x 2.600 x 2.600 mm (max open) Lajdpfxjzbqvdj Abnjc in very good condition

Condition: used, Model CES/P-LT-LIN-8mx1.22-PODB-SH Laedpfx Abjzbqutonec suitable for nitrogen all stainless steel belt width ± 1.220 mm nett belt length 8.000 mm dimensions (l x w x h) : ± 9.300 x 2.100 x 2.300 mm 14 kW product height: max. ± 120 mm

Condition: used, suitable for nitrogen all stainless steel belt width ± 600 mm nett belt length ± 6.000 mm dimensions (l x w x h) : ± 7.600 x 1.500 x 2.300 mm Laedpfx Aozbqumsbnsc product height: max. ± 80 mm

Condition: new, Year of construction: 2026, machine/vehicle number: CAT00C44HECL06824, fuel type: diesel, motor manufacturer: Caterpillar C4.4, General information Field of application: Construction Weights Empty weight: 1.547 kg Functional Generator capacity: 110 kVA Dimensions of cargo space: 277 x 113 x 153 cm CE mark: yes Other information Fuel consumption: 21.7 Liter per Hour at 90% Load Generator: Caterpillar LC3114F Ledpfxoy S N N Eo Abnoac Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 250 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: used, Year of construction: 2000, Technical details: max. wheel diameter: 275 mm gear width: 55 mm max. module: 6,5 min. module: 1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be “prepared” for the individual part procedure. I.e. direct measuring system + part gear brake, workpiece axis + license file for the production of individual parts. Lajdjv N Hilspfx Abnsc *

Condition: new, Year of construction: 2025, machine/vehicle number: CAT00C18A2S400367, fuel type: diesel, motor manufacturer: Caterpillar C18, General information Field of application: Construction Lajdsy Ttpfopfx Abnsc Weights Empty weight: 5.952 kg Functional Generator capacity: 715 kVA Dimensions of cargo space: 532 x 192 x 229 cm CE mark: yes Other information Fuel consumption: 73,5 Liter/Hour at 75% Load Generator: Caterpillar SR500 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1082 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank