Used Paper Embossing Press for sale (13,920)

Condition: good (used), Year of construction: 1999, operating hours: 50,702 h, functionality: fully functional, Baler Paal Konti 325 D/SO, year of manufacture 1999 Technical Data: Manufacturer: Paal Model: Paal Konti 325 D/SO Year of manufacture: 1999 Operating hours: 50,702 Pressing force: 94 t Drive power: 2 x 45 kW Total connected load: 104 kW Feed opening: 1020 x 1750 mm Bale dimensions: 750 x 1100 mm, variable length Binding: 4-fold automatic Throughput at 35 kg/m³ approx. 14 t/h 60 kg/m³ approx. 24 t/h 100 kg/m³ approx. 38 t/h Bale weight: 525 to 800 kg Gusdsyzzgnjpfx Af Tsa Transport dimensions: approx. 12,352 x 2,340 x 2,800 mm (LxWxH) Machine weight: approx. 28,000 kg Materials: Paper, cardboard, light waste, plastic waste Please note: All technical data are based on manufacturer information. We do not accept any liability for the stated specifications or possible errors. This offer is non-binding, subject to prior sale, and can be withdrawn at any time. Inspections are possible by appointment. Sale is ex-works against advance payment, without warranty or guarantee.

Condition: used, pressing force: 100 t, table width: 1,350 mm, table length: 2,550 mm, total length: 3,150 mm, total width: 1,550 mm, total height: 2,150 mm, overall weight: 5,000 kg, No. 04525 Veneer press Ott 300 K 2513 Used Very sturdy design with 4 longitudinal beams in the upper press section and 4 longitudinal beams in the press table Plate dimensions 2550 x 1350 mm LW Total pressure 100 tons Electric heating, replaceable heating elements Heating plates made of solid aluminum, covered with Mylar film Maximum temperature 150 °C Specific pressure 3.0 - 5.0 kg/cm2 4 press cylinders, each 90 mm in diameter Rack-and-pinion guide for the press table Button controls for Open – Close – Stop Circumferential emergency stop pull cord, configured for two-hand operation Opening width continuously adjustable up to approx. 420 mm Automatic pressure regulation via high-pressure gauge Pressure preselection table with 2 specified values for each workpiece size Transport dimensions approx. 3150 x 1550 x 2150 mm LWH Weight approx. 5000 kg To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical data, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: Ex warehouse Gusdoy Aplzepfx Af Tsa

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 44,973 h, laser power: 2,700 W, punching force: 22 t, working range: 2,500 mm, Equipment: cooling unit, safety light barrier, Description X working range max.: 2585mm Y Working range max.: 1280mm Control: Siemens Sinumerik 840 D Laser power: 2700 Watt Gsdpfstpguzsx Af Toua Laser beam on: 6054 hours Laser on: 29826 hours Operating hours: 44973 hrs. Standard equipment: - Sturdy C frame - Coordinate guide with integrated linear magazine, 21 places for tools and clamping claws - Drives: Maintenance-free three-phase servomotors - Programmable hold-down device for repositioning - Sensor-monitored 500x500mm parts chutes for punching and laser station, ejection cylinder on laser chute - Laser unit: High-frequency excited CO2 laser TLF 2700W, vibration-insulated, integrated in machine frame, incl. cooling unit and DIAS 3 laser controller - HI-Las high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - Cutting gas pressure setting programmable - Laser cutting head: 5'' lens, quick-change device, distance control - Sinumerik 840D control system, 10.4'' TFT color screen, simple operation, online help, diagnostic functions, maintenance logbook, technology data, job tables, Teleserice, 3.5'' floppy disk drive, RJ45 network connection Safety: Multi-beam light barriers, quick shut-off hydraulics, suction and compact dust extractor, protective device against stray radiation on the cutting head + TLF 2700 laser + Thread forming function + MultiTool function + Signing / fast beading function + MultiBend function + Rolling technology function + Repositioning cylinder + bulge detection + Chip conveyor automation + Sheetmaster + Gripmaster + Trumasort R4

Condition: like new (used), Good parts conveyor belts for TruMatic 7000 / 6000 Very good condition Gusdpeu S Ny Tefx Af Tja

Condition: excellent (used), Year of construction: 2019, Offer consisting of: Heidelberg Speedmaster CX 102-5 LX2 Manufacturer: Heidelberger Druckmaschinen AG Model: Speedmaster CX 102-5 LX2 Year: 2019 Condition: Very good Status: Under power Available: Immediately Highlights: - AirStar Pro: Central air supply cabinet (water-cooled) - Prinect Inpress Control 2: Spectrophotometric inline measurement system - Prinect Press Center XL 2 control station - Ultrasonic double sheet control - Wallscreen XL touchscreen - Pull lay control - double sheet control - Preset Plus Feeder - Electromechanical stream controls - Feeder touch display - AutoPlate Pro: Fully automatic staggered plate change - Program-controlled automatic blanket wash-up devices for blanket and impression cylinders - Program-controlled fully automatic inking unit wash-up device - Preset Plus Delivery X2 - Dynamic sheet brake - Technotrans Combistar CAN (water-cooled) for ink temperature control - Alcolor Vario dampening system - Energy saving system with automatic switching on/off of all drives - Acoustic package - Scrollstar - air compressor, water-cooled - Sinus-synchronous drive - PowderStar AP 500 CAN: powder application system - XL sheet feeder system - Sheetfed control - AirTransfer system (for sheet transfer) - Coating system Tresu with chambered doctor blade - FilterStar: single-stage dampening solution filtration system - High-end chambered doctor blade system - InsertStar: automatic central lubrication system - CleanStar Compact: Effective powder emission control at delivery - DryStar Combination CANopen dryer for conventional ink and coating with 3 slides - StaticStar Compact: antistatic device Impression count: 59 million. Gusdpfx Afoy Aidws Tsa Excellent condition, video available upon request, machine condition report available.

Condition: excellent (used), Offer consisting of: Heidelberg SM52-2P, year of manufacture 2004, complete N+P available. Gsdpfxey Aicto Af Teua

Condition: good (used), Year of construction: 1978, Hydraulic press, two-column press, oil hydraulic press, hydraulic press, high-speed press, high-speed hydraulic press -Manufacturer: Hans Schoen, Hydraulic press type SH 100 -Pressing force: 100 tons Gjdpfxeyzd I Uj Af Teua -Motor: 11 kW -Clamping table: 580 x 440 mm / Bore Ø 150 mm -Max. insertion height: 435 mm -Projection: 650 mm -Max. stroke: 150 mm -Hole: Ø 50 mm -Dimensions: 1640/1300/H2650 mm -Weight: 4440 kg

Condition: used, Year of construction: 2023, Dener XF 30125 - Hydraulic CNC Press Brake - Control unit (swiveling): ESA S640 CNC 15" 2D graphical display / touchscreen - CNC axes: Y1, Y2 and X - Motorized crowning system with CNC control - Hydraulic press brake valve with CE safety signals - MCS PLC safety control - Laser safety system - Backgauge X-axis: 500 mm (manually adjustable) - Upper tool clamping: L = 150 mm (Promecam) - Upper tool: Eurostamp 1260 / standard (835 & 805 mm, divided into 595 & 210 mm) - Lower die holder: standard width (Promecam) - Lower die: Eurostamp 2067 / standard (835 & 805 mm, divided into 100 mm left, 395 mm, 210 mm & 100 mm right) - 2 front supports, manually adjustable in height and lateral position - Power-on hours: 1184 h - Operating hours: 673 h - Year of manufacture: 2023 Technical data: - Press force: 125 t - Bending length: 3020 mm - Distance between uprights: 3050 mm - Number of axes: 3 - Oil capacity: 200 l - Total power requirement: 11 kW Gujdoy A Rc Ujpfx Af Tsa - Dimensions (W x H x D): 3660 x 2500 x 1340 mm - Weight: approx. 7000 kg

Condition: good (used), Baling press, Schleicher, 16 S – used - : Ex-works price: only €1,950 (net) Manufacturer: Schleicher Model: 16 S Serial number: 6150I1730E Year of manufacture: 20 Height: 2000mm / Width: 1500mm / Depth: 900mm Weight: 1,850kg 380V, 3-phase, 10.3 AMP, 4kW Condition: good Available: immediately Location: Husum Gujdpfx Afsyzcwho Toa Operating manual not available.

Condition: good (used), Year of construction: 2008, pressing force: 30 t, Baler presses, Bramidan, 4-x 30 SLD, 30 tons pressing force – used - : Price ex location: only €3,950 (net) Manufacturer: Bramidan Model: 4-x 30 SLD Number: PEY297206-3 Year of manufacture: 2008 H: 2300mm / W: 1800mm / D: 1500mm Weight: 1,850kg 3x230/400V, 25/16 Amp, 4kW Condition: good (the photo with the warning tape is simply to indicate that the press is not being used anymore as a new, larger one has been purchased) Godpeyzcvwefx Af Tjua Available: immediately Location: Husum Operating manual available

Condition: used, This press brake will be auctioned online in our industrial/machinery auction due to the closure of the ContiTech Transportsysteme site. Godeyzdlmjpfx Af Teua

Condition: used, Single-column hydraulic press EXNER Type EEX 20 S - Machine no.: 1615 Year of manufacture: 1980 - Pressing force: 20 tons - Throat depth: 180 mm - Table size: 380 x 350 mm - Table opening: Ø 50 mm - Ram surface: 310 x 250 mm - Clamping shank: Ø 35 mm - Ram stroke: 100 mm - Max. installation height: 250 mm - Table height above floor: 900 mm - Descent speed: approx. 480 mm/s - Return speed: approx. 480 mm/s - Working speed: 20 mm/s - Hydraulic tank capacity: 110 liters - Hydraulic operating pressure at 20 tons: 200 bar - Motor output: 4 kW - Power connection: 400 Volt, 50 Hz - Stroke release via two-hand control or light barrier - Operating modes: setup, two-hand operation, BWS Gusdsyz Dtdjpfx Af Tsa - SICK light curtain, type LVU, with single- and double-stroke settings and safety function - Rapid approach and working stroke - Stroke limitation dependent on pressure or travel - Mechanically adjustable solid stop - Press force adjustment manually via knurled wheel - Control cabinet mounted on the side of the machine - Operating manual and electrical schematics included - Stroke counter - Space requirement (L x W x H): 1250 x 750 x 2000 mm - Weight: 1.4 tons In good condition

Condition: used, Double-column Hydraulic Press SCHÖN Type SH 25 Machine No. 2440 Year of manufacture: 1979 Press force: 25 tons Column spacing: 630 mm Lateral passage between columns: 120 mm Table area: 580 x 320 mm Ram area: 360 x 220 mm Clamping pin hole: Ø 40 mm Maximum ram stroke: 100 mm Maximum installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Power supply: 380 Volt, 50 Hz - Main cylinder overhauled in 2025 - SICK LUV 206 safety light curtain - Two-hand control - Stroke counter - Rapid stroke and working stroke Gujdsyz Dr Topfx Af Tea - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Press force regulation - Press time extension 1–10 s (pressure holding time) - No operating manual and no wiring diagrams Required space (L x W x H): 1450 x 1100 x 2200 mm Weight: 1200 kg In good condition

Condition: used, Year of construction: 2008, machine/vehicle number: 10322T, functionality: fully functional, pressing force: 120 t, stroke length: 355 mm, table width: 1,560 mm, table length: 3,100 mm, total length: 4,200 mm, total width: 1,800 mm, total height: 2,080 mm, overall weight: 9,000 kg, Equipment: documentation/manual, We offer this used Interwood HOP veneer press, year of construction 2008. Location: Maryport, Cumbria, UK 18000GBP (with VAT) 15000GBP exVAT Open to offers Gusdpfx Asy Ah T Rsf Tea 20m cable and distribution box included in price. Type: HOP Serial number: 10322T Year of manufacture: 2008 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), pressure 6,3 t Guodpfowuu A Ajx Af Tsa throat 200 mm stroke 200 mm dayligth max 500 mm table surface area 450 x 420 mm weight of the machine ca. 1,5 t dimensions of the machine ca. 1,2 x 0,6 x 2,0 m

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, Vacuum press and heating system for laminating layers, veneering, and thermoforming mineral materials and plastics. Machine type: Pioneer Vertical L Usable area: 3050 x 1350 mm Frame internal dimensions: 3130 x 1430 mm Max. workpiece height: 850 mm Overall dimensions: 3960 x 1640 x 1450 mm Weight: 880 kg Machine type: Pioneer Heat L Usable area: 2700 x 1100 mm Overall dimensions: 3110 x 1700 x 760 mm Weight: 685 kg Austrian, ISO-certified production Lifetime warranty (excluding wear parts) Godpfx Asy Awqljf Teua Including digital operating manual

Condition: ready for operation (used), Amada Apelio II 305072 – CNC Turret Punch Press Amada Apelio II 305072 CNC Turret Punch Press | 30T | 1270×3660mm | 58 Station Amada Apelio II 305072 CNC Turret Punch Press in excellent working condition. A proven, high-capacity sheet metal machine ideal for production environments and precision punching jobs. 🔧 Key Specifications: Punching force: 30 Ton Max sheet size: 1270 × 3660 mm (with repositioning) Table size: 1270 × 1830 mm Turret: 58 station (incl. auto-index stations) Max sheet thickness: ~6 mm (mild steel) Control: AMADA / FANUC (model dependent) Gjdpfx Afsyz T Dlj Teua High-speed stroke rate for efficient production ⚙️ Features: CNC controlled for precision and repeatability Thick turret tooling system Suitable for a wide range of sheet metal applications Reliable AMADA build quality 🏭 Applications: Sheet metal fabrication Enclosures, panels, brackets General engineering production

Condition: used, Year of construction: 1998, machine/vehicle number: M-115H- 007-02/15-08, cutting width (max.): 1,150 mm, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, Equipment: safety light barrier, We offer this used Schneider Senator Schneider Senator 115H - TSC paper cutting machine - Guillotine, year of manufacture 1998. Gujdpfxeymy I Hj Af Toa Manufacturer: Schneider Senator Model: Schneider Senator 115H - TSC Year of manufacture: 1998 Condition: used Machine type: paper cutting machine - Guillotine If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), Year of construction: 2004, AMADA MODEL HFT 8025 80 tons capacity x 2500 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS colour graphic cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFT 8025 downstoke CNC Press brake Year 2004 Tonnage 100 KN Type CD 2000 CNC Gjdpfxsu A Dgrj Af Teua Controlled Axis Y1, Y2, X, R Max. Bend Length 2500 mm Open height 470 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 6100 kg Bed Length 2500 mm Bed Width 60 mm Open Height 470 mm Throat Depth 420 mm CNC Control Backguage Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Year of construction: 1960, condition: used, R.A.S. rotary mandrel press Type 200-20 machine no. 117/6 stroke 200 mm pressure force 20 t spindle diameter 60 mm Gjdpfx Afjic Rn Uo Tjua

Year of construction: 1965, condition: used, Press brake Factory Wilhelm Jonescheit type HYPM 125 -300 stroke 30 - 70 mm pressure 125 t weight 9150 kg Gjdpfx Afsillxyo Tsua

Condition: used, #200112 Trumpf OW200/S - press brake tools / upper tools 86.00° R4.00 / H=218.30 / 800 kN/m Segment lengths: 2x 25 mm Gedpfey Anydox Af Tsua 1x 30 mm 1x 40 mm 2x 100 mm (reduced body 70 mm 1x left / 1x right) 5x 200 mm 5x 300 mm ----- #200113 Trumpf OW201/S 86.00° R1.00 / H=220.00 / 800 kN/m Segment lengths: 2x 25 mm 1x 30 mm 1x 35 mm 1x 40 mm 1x 45 mm 1x 50 mm 3x 100 mm (2x reduced body 70 mm 1x left / 1x right) 1x 200 mm 7x 300 mm

Condition: excellent (used), pressure 16 t weight of the machine ca. 16 t Gedpfxeyrhmho Af Teua

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, Pressure: 225 t Bending length: 4050 mm Gjdjyz S Ngjpfx Af Toua Control: DA 69 TW Oil capacity: 400 l Total power requirement: 17 kW Machine weight approx.: 18,100 kg Dimensions: 5700 x 2610 x 3300 mm

Condition: excellent (used), Year of construction: 2026, functionality: fully functional, Press force: 25 t Bending length: 1250 mm Distance between uprights: 1200 mm Control: Cybelec CybTouch 12 Stroke: 150 mm Installation height: 340 mm Rapid down speed: 220 mm/s Bending speed: 0-12 mm/s Total power requirement: 5.5 kW Machine weight approx.: 2,500 kg Dimensions: 1980 x 1170 x 2185 mm Standard equipment: Basic features: Guedpsyz Sw Refx Af Tja • CNC control Cybelec CybTouch 12 • 4 axes: Y1-Y2-X-R • Backgauge system model GHP-2 • Servo-driven main motor • Safety system: DSP AP+MCS • HAWE hydraulic system • CE standard