Used Pastry Shop for sale (3,379)

Condition: good (used), REF: MM6180 Available as a single lot comprising of 2x Tom Chandley Ltd Ovens and 1x Newsmith Stainless Ltd – Industrial Bread Pan Washer. Technical specification ⚙️ Tom Chandley Ltd – Electric 3-Deck Oven ✅ Manufacturer: Tom Chandley Ltd ✅ Model: Compac (3-deck, 2 x trays per deck) ✅ Voltage: 250V ✅ Power: 5.3 kW per phase (x3 phases) ✅ Date Code: 1979 (possibly - date code is 3.2.6.79.) 🗒️ Notes: Stainless steel construction, manual dial controls, single stack on stand with castors. Tom Chandley Ltd – CP MK4 4-8-8 Electric 4-Deck Oven ✅ Manufacturer: Tom Chandley Ltd ✅ Model Ref: CP MK4 4-8-8 (4 x decks, 8 x trays per deck) ✅ Date of Manufacture: January 1998 ✅ Voltage: 400/230V Ksdpfow Rn Euex Ap Dedu ✅ Phases: 3-phase, 50Hz ✅ Total Load: 61.84 kW ✅ Max Amps/Phase: 90.95A ✅ Largest Single Load: 23.73A 🗒️Notes: 4 decks with 8 trays per deck (32 trays total). Stainless steel, individual deck controls, heavy-duty commercial bakery use. Newsmith Stainless Ltd – Industrial Bread Pan Washer ✅ Manufacturer: Newsmith Stainless Ltd. ✅ Stainless steel construction. ✅ Front-loading with internal rack system for bread pans or trays. ✅ CE marked 🗒️Notes: Requires detergents approved by Newsmith Stainless Ltd to maintain warranty ❗Important: These machines are in the Republic of Ireland and subject to European import/export regulations. Responsibility for collecting/shipping these machines will be with the buyer.

Condition: excellent (used), J4 tunnel oven from year 2012, disassembled and ready for shipment. For more information, please send an email. Kodpfx Apow Elyts Dsdu

Condition: used, Year of construction: 2005, functionality: fully functional, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, inner dimension length: 800 mm, inner dimension width: 1,200 mm, inner dimension height: 200 mm, total length: 1,400 mm, total width: 1,530 mm, total height: 1,670 mm, fuel type: electric, Stacking oven Wiesheu EBO 1-128R Separate temperature control for lower and upper heating elements 3 stacking compartments, height: 20 cm Oven is mobile with a locking mechanism Ksdpfezw Du Dox Ap Djdu Modular design Connection: 400V, 16A-CEE plug Dimensions: 1530 x 1400 x 2167 mm (W x D x H) Used oven

Condition: used, Year of construction: 2005, power: 37.6 kW (51.12 HP), input voltage: 6 V, temperature: 320 °C, inner dimension length: 120 mm, inner dimension width: 80 mm, inner dimension height: 17 mm, total length: 150 mm, total width: 135 mm, total height: 215 mm, overall weight: 550 kg, number of chambers: 4, fuel type: electric, Miwe Condo Co.4.1208 with extractor hood, baking chamber 120x80xHx17 cm, electric, power 37.6 kW, 400/230V. Kdedpfsy N Tbgox Ap Dsu

Condition: good (used), Lippelt Mini Rustica GS, fully functional with 3 cutting rollers, moistening system and poppy seed spreading. The dough sheeting machine is mobile on wheels: Operates on 380 volts, 1 kW. Kedpfx Aoy E Ntwop Djdu

Condition: used, Model: H-600 Serial no: 11-122-116 Operating hours: 17,395 Voltage: 380 V, 50 Hz RPM: 1,425 Power: 1 HP Current: 4.0 A Phases: 3 Kodpjyzzldofx Ap Dodu

Condition: good (used), Code: 0462 Brand: SERRMAC Kodpszp Exzefx Ap Dodu Model: V 22 - CE Standard Pillar drill with swivel table for machine shops, workshops, carpentry shops, and other applications - CE Standard Technical data: Sturdy construction Drilling capacity in steel diameter 22 mm Spindle taper cm2 Spindle stroke 90 mm Column diameter 98 mm Distance from column to spindle center 201 mm Table 350 x 250 mm Spindle speed 255/380/420/560/630/660/950/990/1090/2380/2590/3850 rpm Motor power 0,55 Kw Overall dimensions mm 400 x 750 x 1700 h Weight kg 170

Condition: used, Professional Bongard Dividier SP50L dough divider/rounder. Suitable for quickly and accurately dividing and rounding dough for rolls, buns, and pizza dough. Robust industrial design, easy to operate, and ideal for bakeries and catering production. Ensures consistent dough weights and high production capacity. The machine is in used condition. Kdjdpfx Aozbrzuep Deu

Condition: used, Oliebollen (Dutch donut) production line: fryer – deep fryer – oliebollen pan – frying line Automatic conveying system Basket return system Immersion racks Digital pre-selection Drip tray, side Drip tray, rear Apple donut baskets Heating element 10.5 kW, 13.5 kW and 15.7 kW Kedpfx Apjz Hxr Tj Dsdu

Condition: like new (used), Year of construction: 2023, operating hours: 3,200 h, functionality: fully functional, machine/vehicle number: IX-GN-4044-S, input voltage: 230 V, warranty duration: 12 months, working width: 900 mm, total width: 1,000 mm, total length: 2,200 mm, total height: 1,100 mm, year of last overhaul: 2026, air pressure: 6 bar, control voltage: 230 V, ⚙️ Included: • Full conveyor systems • Integrated reject systems ( air reject ) • Stainless steel food-grade construction • Touchscreen control panels 2 off right hand units, Full production capacity 60-70k per hour ✅ Condition: • Recently removed from production • Fully operational prior to removal • Clean, well-maintained units • Matching set (ideal for line integration or multi-site use) 💡 Ideal For: • Ready meal manufacturers • Meat / poultry processors • Bakery & snack producers • Food contract packers Detects Glass / Plastic / Wood any foreign bodies 📦 Sale Options: • Available individually or as a complete package • Priority given to bulk buyers 🌍 Additional Information: • Available for UK and international buyers • Assistance with loading and logistics can be arranged • Viewing can be organized by appointment 💰 Price: £20,500 Can be discussed on appointment / via email / phone (Discount available for multi-unit purchase) 📩 Contact: Craig Conway Conways Engineering Ltd Please get in touch for: Kedpsyyl Aqjfx Ap Djdu • Additional photos • Full specifications • Video / demonstration • Bulk purchase enquiries All Test certs attached from Ishida for X Ray and radiation safe levels Viewings Welcome for full demonstration

Condition: good (used), Year of construction: 2006, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Kjdpfx Aoz N E Aljp Djdu Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600

Condition: excellent (used), Year of construction: 2009, 190 USED Double Refrigerator. INTERNAL DIMENSIONS (in cm): - left: depth 350, width 160, height 240, - right: depth 350, width 280, height 240. EXTERNAL DIMENSIONS (in cm): Kedoxqy Hcspfx Ap Dedu - depth 370, - width 480, - height 255. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Our offer includes: bakery ovens, trolley ovens, deck ovens, confectionery ovens, shop ovens, bakery machines, bread lines, roll lines, cake lines, croissant lines, baguette machines, kneading machines, mixers, sheeters, croissant machines. We invite You to check all our ads.

Condition: used, Year of construction: 2011, operating hours: 2,591 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,400 mm, total length: 1,250 mm, total height: 4,000 mm, volume flow: 10,000 m³/h, filter area: 100 m², suction capacity: 10,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-based TEKA AIRTECH P10. The main areas of application for these systems are industrial plants/welding shops where point extraction is not feasible or where point extraction is insufficient to maintain air quality in the hall. Laterally mounted ducts with a pollutant collection point at a height of 3 m draw in contaminated air and direct it to the filtration section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. Compressed air pulses are supplied to clean the cartridge filters automatically at the required intervals. Upon impact, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the discharge of the cleaned air directs the contaminated air in the hall towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. Parameters: Capacity - 10,000 m3/h Motor power - 11 kW Filtration area - 100 m2 Kedpoz N Am Usfx Ap Dsdu Fan in a sound-absorbing housing Year of manufacture - 2011 Number of operating hours - 2591 h Dimensions: Height - 4.00 m Base width - 1.20 m x 0.80 m Stock number: 1173

Condition: used, Year of construction: 2003, functionality: unexamined, center height: 300 mm, center width: 1,500 mm, turning length: 1,500 mm, The Löw W570 is a used, conventional lead and follower rest lathe, manufactured in 2003. With a center height of 300 mm and a turning length of 1,500 mm, it is a robust workshop machine for individual parts and repairs. It is equipped with a Givi Misure ME 620 digital display, and the operating manual is available. The machine is located in the Düsseldorf area. TECHNICAL DATA - Year of manufacture: 2003 - Center height: 300 mm - Turning length: 1,500 mm - Digital display: Givi Misure ME 620 EQUIPMENT AND ACCESSORIES - Three-jaw chuck (as shown in the photos) - Tool holder on the top slide (as shown in the photos) - Tailstock - Tool set - Operating manual for Löw W 490/570 series CONDITION During our inspection on October 1, 2026, the machine was not in operation. We are therefore selling it as untested, in its current condition. We recommend an on-site inspection. Kdedjz H Uhqjpfx Ap Deu AREAS OF APPLICATION For maintenance, training, prototype construction, and job shop turning, i.e., anywhere where individual parts are turned manually. LOCATION AND HANDLING The machine is located in the Düsseldorf area. Inspection by appointment. Dismantling, loading, and transport are organized by the buyer; upon request, we can provide contact information for freight forwarders in the region. Price on request. Please contact us via the contact form.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 8,293 h, load capacity: 16,000 kg, lifting height: 3,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,320 mm, fork carriage width: 2,500 mm, fork length: 2,500 mm, empty load weight: 23,720 kg, total length: 5,325 mm, drive type: Diesel, construction width: 2,540 mm, Diesel forklift Load center: 1200 Fork width: 250 mm Fork thickness: 100 mm Mast type: Standard Kedpfx Aoz Ewcnop Dodu Condition: Ready for use and fully functional Technical condition: very good Front tire type: Pneumatic Front tire size: 12.00-20 Rear tire type: Pneumatic Rear tire size: 12.00-20 Description: In addition to this Kalmar model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-to-own and financing options are available at favorable terms. We are also happy to purchase your used vehicles outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this DCG150-12. P.S.: Our forklift repair shop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons and up. We will also gladly offer consignment sales for your vehicle. Side shifter, fork positioner Fork positioner opening range: 685 / 2360 mm Heater, full cabin Swivel seat

Condition: like new (used), Miwe Combi Backofen with stonefloor and convection oven and steam function in very good working condition if you have further questions please sent an request! Kdedeumm N Nspfx Ap Deu

Condition: like new (used), Treif Breadslicer 10/12/14MM Kjdpfxeumphbs Ap Dsdu

Condition: like new (used), Fortuna divider for maximum 100gram pieces In good working condition for more information please sent an request Ksdoumpkiepfx Ap Dsdu

Condition: new, Code: N0022 Brand: ARIATECH Model: ATB 2 - CE Standard Professional wheeled dust collector with 2 filter bags for dust and chips from carpentries, machine shops and various - CE Standard Structure in sturdy galvanized sheet metal Wheeled base to be able to be moved around the workshop and be connected to more machines Kdodpfju S N T Hjx Ap Dsu Can be mounted indifferently either with the suction mouth facing upward or downward Motor Hp 4 ( Kw 3) Diameter of nylon bags mm 500 Diameter of plastic collection bags mm 500 Overall dimensions of assembled machine mm 1700 x 600 x 2500 h Overall dimensions of disassembled and packed machine mm 1750 x 800 x 800 h Weight kg 130

Condition: good (used), 2 Bakery Mixers Sigmar - 60 QT, year 2011 complete with stainless steel bowl and attachments and stainless bowl carrier Peerless Bakery Mixer - 80 QT, complete with stainless steel bowl and attachments Kodpfjiqg Uusx Ap Dsdu

Condition: refurbished (used), Year of construction: 2003, Koenig Mini Rex 4000 bun roll machine 2-pocket new drum and pistons SKG54-AKG70 Kodpfxjrf Dn Es Ap Djdu weight range 25-140 grams cap. pcs/h 4000 year of build 2003

Condition: used, Year of construction: 1973, turning diameter over bed 2997 mm turning diameter over slide rest 2235 mm turning length 12200 mm Control SIEMENS faceplate diameter 2000 mm required space ca. 7 x 22 m weight of the machine ca. 220 t HOESCH MFD CNC HEAVY DUTY LATHE WITH SIEMENS CONTROL Type: D2000 SGK-1 Technical documentation is included Technical Specifications Space requirement: 7 x 22 metres + control cabinet 4.7 x 0.5 x 2 metres Faceplate 2006mm Centre Height 1,499mm Swing Over Saddle 2235mm Swing Over Bed 2997mm Turning Length 12192mm Min/Max Workpiece Held In Chuck Ø457/1600mm Maximum Workpiece Weight 110 Ton Speed Range 0.5- 140rpm (300hp Motor) Feed Range 0.0118-7.08''/Rev. Steady Capacity Ø356-902mm Copying Depth 508mm lnductive Maximum Cutting Force 30,000Nm Twin Barrel Steady Capacity Ø356- 902mm, 50 Ton Capacity, Roller Type. Machine Data 1.1 Total Machine Max. Swing over bed slide 2,000 mm Center height over bed 1,500 mm Distance between centers 12,000 mm max. weight of workpiece 100,000 kp height measured from shop floor level up to machine axis 2,200 mm 1.2 Headstock Diameter of main spindle 670 mm Diameter of faceplate 2,000 mm Max. chucking diameter 1,600 mm Min. chucking diameter 455 mm Dead Center Angle 80 ° Faceplate Speed: Constant torque 1st range 0,5 – 2,6 2nd range 1,25 – 7,2 3rd range 3,1 - 18 4th range 7,8 - 45 Constant capacity 1st range 9,0 2nd range 22,6 3rd range 56 4th range 140 Capacity of Main Drive 220 HP Max. Torque faceplate 30,000 kpm Key Speed 5,7 rev/min 1.3 Saddle Max. admissible main cutting force 30,000 kp Feed Speed longitudinal 0,3 – 120 mm / min Feed Speed transverse 0,3 – 120 mm / min Rapid Traverse Speed longitudinal 2,000 mm/ min Rapid Traverse Speed transverse 1,000 mm/ min Max. copying depth 500 mm Max. length of tool carrier measured from front edge cross slide to front edge tool carrier 700mm Tool carrier – width 60mm 35 mm Cutting Edge height of tool units 60 mm Cutting edge height of shank-type tools beeing located on the clamping table 100 mm Travel of upper tool post 820 mm 1.4 Tailstock Ksdpfx Apjt Ei Hue Dedu Tailstock barrel diameter 580 mm Adjustment of the barrel 150 mm Dead Center angle 80 ° Speed of rapid traverse 2,000 mm / min Positioning speed 500 mm / min 1.5 Steady Clamping range 350 – 900 mm ...

Condition: good (used), San Cassiano SE80 Spiral mixer Removable bowl spiral mixer, 80Kg capacity bowls, two bowls, timer settings, forward / reverse, 3Ph Kjdpfx Apetu N Aps Dedu

Condition: used, stainless crumber, bottom mounted motor with discharge chute. Kdodpodg H T Ssfx Ap Dou

Condition: excellent (used), 310 USED Convection-Microwave Oven, Turbo Oven. TECHNICAL DATA: - Voltage: 380V, - Power: 3 kW. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices Kedpfeyi Urxex Ap Djdu