Used Pendulum for sale (582)

Condition: new, maximum load weight: 30,060 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 7,410 mm, loading space width: 2,346 mm, loading space height: 1,515 mm, loading space volume: 26 m³, total width: 2,550 mm, total height: 2,980 mm, Year of construction: 2026, Equipment: ABS, Wielton Strong Master Hardox steel tipper body with a 26 m³ loading volume HP tipper body Immediately available 30 Years Black Edition Overlapping oscillating tailgate with grain slide New vehicle, immediately available! Unladen weight approx. 5,940 kg Equipment: - SAF disc axles - Axle lift with control line - Automatic tilting lowering - JOST geared landing gears, full load - WABCO braking system - Semi-circular Hardox tipper body - Overlapping oscillating tailgate with lateral tension locks - Grain slide in the center + additional rotating locks - Double pendulum bearing and replaceable rubber seal - Floor 4 mm / side wall 3 mm - Roller cover with quick-release fastener - Operating platform on the frame - Hyva 250 bar hydraulic cylinders - Tires 385/65 R22.5 Hankook TH31 - Aluminum rims ABERG - Rear lights, full LED Aspöck - 2x LED reversing lights - Tool box - Water tank - Shovel + broom - Aluminum ladder Dkedpszctmhjfx Apwer Subject to prior sale and errors in this offer. Only the agreements in the order confirmation or the purchase contract are binding. You will receive the exact scope of equipment and prices from our sales staff. Please contact us.

Condition: like new (used), Year of construction: 2023, operating hours: 3,700 h, functionality: fully functional, Several robots of various models and manufacturing years are available. 1 unit of IRB 1600 with a payload of 6 kg and a reach of 1.45 m, manufactured in 2017. 2 units of IRB 1600 with a payload of 10 kg and a reach of 1.2 m, manufactured in 2023 (approximately 3500 operating hours). Specifications: 709-1 DeviceNet Master/Slave 888-3 PROFINET Device 608-1 World Zones 611-1 Path Recovery 613-1 Collision Detection 616-1 PC Interface 617-1 FlexPendant Interface 623-1 Multitasking 996-1 Safety Module 1125-1 SafeMove Basic Pendulum Calibration Axis Calibration 1 unit of IRB 1600 with a payload of 10 kg and a reach of 1.45 m, manufactured in 2021 (approximately 5500 operating hours). Specifications: RobotWare_6.12.4008 613-1 Collision Detection 709-1 DeviceNet Master/Slave 617-1 FlexPendant Interface 623-1 Multitasking 611-1 Path Recovery 888-3 PROFINET Device 1125-1 SafeMove Basic 996-1 Safety Module 608-1 World Zones Pendulum Calibration Axis Calibration 🔧 Robot service and refurbishment We provide complete service and refurbishment for industrial robots. ⚙️ Spare parts We sell spare parts and also offer professional repairs and refurbishment. Dsdpfeztl I Rex Apwjkr 🤖 Robot sales with warranty We supply industrial robots with a warranty for commissioning or a warranty of up to 12 months. 🏭 More than 13 years of experience We have been operating in the market for over 13 years and offer experience, technical know-how, and our own service facilities. Do you need service, a spare part, or a robot? Contact us.

Condition: used, Year of construction: 2019, operating hours: 692 h, travel distance X-axis: 4,500 mm, Third-generation CMA drilling center for steel profiles and structural parts, built 2019 with only approx. 692 operating hours. OMRON touchscreen CNC with dialog and DIN/ISO programming, 4,500 mm X-travel, BT40 spindle 50-4,000 rpm (13.1 kW, up to 125 Nm) for solid drilling up to dia. 36 mm and tapping up to M24 in steel. Pendulum operation for loading during machining, 10-position tool changer, Z-Reader height probing and coolant through spindle. Fully functional. Djdpfx Aezmyzfspwskr

Condition: new, mileage: 500 km, power: 382 kW (519.37 HP), overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, brakes: retarder, gearing type: automatic, loading space width: 2,420 mm, loading space length: 4,800 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, New Municipal Vehicle TG3 MAN TGS 18.520 BL 4x4 All-Wheel Tipper with Meiller Tipper Body and Küpper-Weisser Winter Service Equipment, 22,000 kg permissible gross weight for winter service, with retarder and 520 HP, 62,000 kg permissible gross combination weight Tech. Plus, air conditioning, auxiliary heating, day registration with MAN manufacturer's warranty from first registration, and much more. Equipment: - Mileage approx. 500 delivery kilometers - 18,000 kg permissible gross weight - 22,000 kg technically max. permissible gross weight for winter service - Front axle driven as external planetary axle, rear axle HP-1352 - Increased front axle load capacity to 10,000 kg for winter service up to max. 62 km/h - 11,500 kg permissible rear axle load, 13,000 kg technically permissible rear axle load - 9,500 kg front axle spring capacity, 13,000 kg rear axle spring capacity - Winter service hydraulics 2-circuit with screw couplings by Küpper-Weisser - 2 hydraulic pumps on engine, 11 ccm and 22.5 ccm - Front mounting plate - Winter service lighting - Heated windscreen - TGS NN cab mid-length with rear window - Wheelbase 3,900 mm - MAN diesel engine D2676 LFAX, 382 kW (520 HP) output with 2,650 Nm torque - Euro 6e engine - Drive 4x4 - Front axle as external planetary axle, driven, switchable - High construction - Differential locks in front and rear axle - Meiller 3-way tipper approx. 4.80 m x 2.42 m x 0.60 m high - Front wall 0.80 m high - Side panels M-Jet, steel HB 450, 2.5 mm - Platform floor made of steel HB 400, 4 mm - Recessed lashing eyes in the floor plate - Drop-down sides on tipper body - Rear wall of tipper body pendulum and partially drop-down with manual claw lock - MAN TipMatic 12.28 OD with Retarder 35 Djdpfx Apsy E D Euswekr - Retarder Eco - Gearbox for increased tractive force during driving - Transmission function MAN Idle Speed Driving - Transmission function Rock-Free - MAN TipMatic Performance and Efficiency driving program up to 70,000 kg - MAN TipMatic Offroad driving program up to 70,000 kg - MAN TipMatic Manoeuvre program, shunting mode - Transfer case MAN G172 with on-road and off-road range - Air conditioning, Climatronic - Additional water heating, 6 kW - Towing hitch Rockinger type 400 G 150A with Duomatic connection - 62,000 kg permissible gross combination weight Tech. Plus - 44,000 kg trailer load Tech. Plus - Tipper hydraulics connections at rear - Front axle with leaf springs, rear axle air-suspended - Front axle AP 9 t, rear axle AP 13 t - Axle ratio i=3.63 - Stabilizer for front and rear axle - MAN Comfort Steering - Electronic braking system EBS - Full brake assist - Roll-off protection MAN EasyStart - ABS, ASR, ESP - High-performance engine brake MAN EVBec, adjustable - Cruise control - 310 liter aluminum tank right - Refrigerator in cab - Sun visor - 2 rotating beacons on cab roof - Work lamps - Multifunction steering wheel - MAN EasyControl Engine control panel, 2 functions, can be operated from outside with door open - Electrically adjustable and heated exterior mirrors - Electric window lifters - MAN Media System 7 inch - MAN Sound System Advanced - Air-suspended driver's comfort seat with lumbar support, shoulder adjustment and heating - Comfort quality seat covers - New vehicle with day registration and MAN manufacturer's warranty from first registration Price NET plus 19% VAT. Attractive financing offers available. All information without guarantee. Errors and prior sale reserved. Internal vehicle number: 2602 F

Condition: new, mileage: 500 km, power: 382 kW (519.37 HP), overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, brakes: retarder, gearing type: automatic, loading space width: 2,420 mm, loading space length: 4,800 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, New TG3 municipal truck MAN TGS 18.520 BL 4x4 all-wheel tipper with Meiller tipper and Küpper-Weisser winter service equipment, 22,000 kg permitted gross vehicle weight for winter service, with retarder and 520 HP, 62,000 kg permitted gross train weight Tech. Plus, air conditioning, auxiliary heater, day registration with MAN manufacturer's warranty from the date of first registration, and much more. Equipment: - Mileage approx. 500 km (transfer mileage) - 18,000 kg permitted gross vehicle weight - 22,000 kg technically permissible gross vehicle weight for winter service - Front axle driven planetary axle, rear axle HP-1352 - Increased load capacity on front axle to 10,000 kg for winter service up to max. 62 km/h - 11,500 kg permissible rear axle load, 13,000 kg technically permissible rear axle load - 9,500 kg spring capacity front axle, 13,000 kg spring capacity rear axle - Winter service hydraulics, 2-circuit with screw couplings by Küpper-Weisser - 2 hydraulic pumps on engine, 11 ccm and 22.5 ccm - Front mounting plate - Winter service lighting - Heated windscreen - TGS NN medium-length cab with rear wall window - Wheelbase 3,900 mm - MAN diesel engine D2676 LFAX, 382 kW (520 HP), 2,650 Nm torque - Engine Euro 6 e - 4x4 drive - Front axle driven planetary axle, switchable - High chassis - Differential lock front and rear axle - Meiller 3-way tipper approx. 4.80 m x 2.42 m x 0.60 m high - Front panel 0.80 m high - Side walls M-Jet, steel HB 450, 2.5 mm - Tipper bed made of steel HB 400, 4 mm - Recessed lashing eyes in deck plate - Side walls of tipper foldable Dkedpjy E D E Uofx Apwsr - Tipper tailgate pendulum mounted and partly foldable with manual claw lock - MAN TipMatic 12.28 OD with retarder 35 - Retarder Eco - Transmission for increased push operation - MAN Idle Speed Driving transmission function - Transmission rocking function - MAN TipMatic Performance and Efficiency driving program up to 70,000 kg - MAN TipMatic Offroad driving program up to 70,000 kg - MAN TipMatic Manoeuvre driving program, shunting mode - MAN G172 transfer case with on-road and off-road ratio - Air conditioning, Climatronic - Additional water heater, 6 kW - Trailer hitch Rockinger type 400 G 150A with Duomatic connection - 62,000 kg permitted gross train weight Tech. Plus - 44,000 kg permissible trailer load Tech. Plus - Tipping hydraulics connections at the rear - Front axle leaf-sprung, rear axle air-suspended - Front axle AP 9 t, rear axle AP 13 t - Axle ratio i=3.63 - Stabilizer for front and rear axles - MAN Comfort Steering - Electronic brake system EBS - Full brake assistant - Start-off aid MAN EasyStart - ABS, ASR, ESP - High-performance engine brake MAN EVBec, adjustable - Cruise control - 310-liter aluminum tank right side - Cooler box in cab - Sun visor - 2 rotating beacons on cab roof - Work headlights - Multifunction steering wheel - MAN EasyControl engine control panel, 2 functions, operable from outside with door open - Electrically adjustable and heated exterior mirrors - Electric windows - MAN Media system 7 inch - MAN Advanced sound system - Driver comfort seat with air suspension, lumbar support, shoulder adjustment, and heating - Comfort quality seat covers - New vehicle with day registration and MAN manufacturer warranty from first registration Price NET plus 19% VAT. Attractive financing offers available upon request. All information without guarantee. Subject to errors and prior sale. Internal vehicle number: 2602 F

Condition: used, mileage: 768 km, power: 184 kW (250.17 HP), first registration: 03/2026, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2027, color: white, gearing type: automatic, loading space length: 3,800 mm, loading space width: 2,350 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), New vehicle, 12 tons. MAN TGL 12.250 4x2 truck, new TG3 model with 250 HP, Meiller three-way tipper and crane prep, payload of 6,600 kg, trailer coupling (pintle + ball), gross combination weight 24,000 kg, air conditioning, rear axle differential lock, rear axle air suspension, rear-view camera, extended MAN factory warranty, and much more. Equipment: - Extended warranty: - Truck general vehicle warranty until 19/03/2028 or up to 100,000 km - Truck ATG and ATG+ warranty until 19/03/2030 or up to 240,000 km - Mileage approx. 768 km - Short CC cab with 3 seats and rear wall window - Wheelbase: 3,600 mm - Unladen weight: 5,390 kg - Payload: 6,600 kg - Engine: Euro 6 E, 250 HP and 1,050 Nm torque - Drive: 4x2 - Meiller Trigenius D208, three-way tipper approx. 3.80 m x 2.35 m x 0.50 m high, with crane prep - Bulkhead 0.70 m high - Side and rear walls of tipper body: 1.5 mm, M-JET, HBW 240 steel - Tipper floor: HBW 450 steel, 4 mm - Recessed lashing eyes in floor plate - Pendulum rear wall on tipper body - MAN PowerMatic 08.13 OD automatic transmission - Differential lock on rear axle - Air conditioning - Trailer coupling: Ringfeder RF40/G145A with air connections - Ball head coupling for trailer loads up to 3,500 kg with rear wall protector - Permissible trailer load with continuous brake system 13,000 kg - Technically possible trailer load with continuous brake system: 14,438 kg - Permissible gross combination weight: 24,000 kg - Front axle: leaf-sprung, rear axle: air-suspended - Front axle: 4,800 kg drop-centre, HY rear axle 8,700 kg - Front axle load: 4,700 kg, rear axle load: 8,700 kg - Axle ratio: i=4.11 - Stabilizer for front and rear axle - Shock absorbers on front and rear axles - Full brake assist - EBS with ABS and ASR - ESP - Emergency brake assist (EBA) - Lane departure warning (LDW) - MAN Attention Guard Djdpoyy Hbbsfx Apwekr - Alcohol interlock prep - Front detection - Traffic sign recognition - Cruise control - Disc brakes on front and rear axles - Sun visor - 2 revolving beacons on cab roof - 2 work lights on cab roof - LED daytime running lights - Roof hatch - Multifunction steering wheel - Electrically adjustable and heated external mirrors - Electric windows - Rear-view camera - Professional 12.3-inch instrument cluster - MAN Media System Advanced 7-inch - Driver seat package Plus with air suspension, belt height adjustment, and seat heating - Air-sprung driver comfort seat - MAN sound system New vehicle with day registration in 03/2026 and extended MAN factory warranty. Net price plus 19% VAT. Attractive financing options available upon request. All information given without obligation. Subject to errors and prior sale. Internal vehicle number: 2601

Condition: used, mileage: 500 km, power: 382 kW (519.37 HP), first registration: 08/2026, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, next inspection (TÜV): 08/2027, brakes: retarder, gearing type: automatic, loading space width: 2,420 mm, loading space length: 4,800 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, New vehicle TG3 Municipal Truck MAN TGS 18.520 BL 4x4 all-wheel tipper with Meiller tipper body and Küpper-Weisser winter service equipment, 22,000 kg permissible gross weight for winter service, with retarder and 520 HP, 62,000 kg permissible gross combination weight Tech. Plus, air conditioning, auxiliary heater, day registration with MAN manufacturer's warranty starting from first registration, and much more. Equipment: - Mileage approx. 500 delivery kilometers - 18,000 kg permissible gross weight - 22,000 kg technically max. permissible gross weight for winter service - Front axle as externally planetary drive axle, rear axle HP-1352 - Increased load capacity on front axle to 10,000 kg for winter service up to max. 62 km/h - 11,500 kg permissible rear axle load, 13,000 kg technically permissible rear axle load - 9,500 kg front axle spring capacity, 13,000 kg rear axle spring capacity - Winter service hydraulics dual-circuit with screw couplings, by Küpper-Weisser - 2 hydraulic pumps on engine, 11 ccm and 22.5 ccm - Front mounting plate - Winter service lighting - Heated windshield - TGS NN medium-length cab with rear wall window - Wheelbase 3,900 mm - MAN diesel engine D2676 LFAX, 382 kW (520 HP) output with 2,650 Nm torque - Euro 6 e engine - 4x4 drive - Front axle as externally planetary axle, driven, selectable - High chassis design - Differential locks on front and rear axles - Meiller 3-way tipper approx. 4.80 m x 2.42 m x 0.60 m high - Front wall 0.80 m high - Side boards M-Jet, steel HB 450, 2.5 mm - Platform floor steel HB 400, 4 mm - Fully retractable lashing eyes in floor plate - Drop-down side panels on tipper body - Rear wall of tipper body pendulum action and partially foldable with manual claw lock - MAN TipMatic 12.28 OD with retarder 35 - Eco retarder - Transmission designed for increased drive torque - Gearbox function MAN Idle Speed Driving - Gearbox function rocking mode - Driving program MAN TipMatic Performance and Efficiency up to 70,000 kg - MAN TipMatic Offroad driving program up to 70,000 kg - MAN TipMatic Manoeuvre, shunting mode - Transfer case MAN G172 with on-road and off-road mode - Air conditioning, Climatronic - Auxiliary water heater, 6 kW - Trailer hitch Rockinger type 400 G 150A with Duomatic connection Dkedpfxey E D Hls Apwor - 62,000 kg permissible gross combination weight Tech. Plus - 44,000 kg trailer load Tech. Plus - Tipper hydraulic connections at the rear - Front axle leaf-sprung, rear axle air-suspended - Front axle AP 9 t, rear axle AP 13 t - Axle ratio i=3.63 - Stabilizer for front and rear axles - MAN Comfort Steering - Electronic braking system EBS - Full brake assist - MAN EasyStart hill-hold assist - ABS ASR ESP - High-performance engine brake MAN EVBec, multi-stage - Cruise control - 310-liter aluminum fuel tank, right side - Refrigerator in driver's cab - Sun visor - 2 rotating beacons on cab roof - Work lights - Multifunction steering wheel - MAN EasyControl Engine control panel, 2 functions, operable from outside with door open - Electrically adjustable and heated exterior mirrors - Electric windows - MAN Media System 7-inch - MAN Advanced sound system - Driver comfort seat, air-suspended with lumbar support, shoulder adjustment and heating - Comfort grade seat upholstery - New vehicle with day registration and MAN manufacturer's warranty from first registration Price NET, plus 19% VAT. Attractive financing offers available upon request. All specifications without guarantee. Subject to errors and pri

Condition: used, mileage: 500 km, power: 382 kW (519.37 HP), first registration: 08/2026, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, next inspection (TÜV): 08/2027, brakes: retarder, gearing type: automatic, loading space width: 2,420 mm, loading space length: 4,800 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, New vehicle: TG3 Municipal Truck MAN TGS 18.520 BL 4x4 all-wheel tipper with Meiller tipper body and Küpper-Weisser winter service equipment. 22,000 kg permissible gross weight for winter service, with retarder and 520 HP, 62,000 kg technically permissible gross combination weight (Tech. Plus), air conditioning, auxiliary heater, day registration with MAN manufacturer's warranty from the first registration date, and much more. Specification: - Mileage approx. 500 km (delivery mileage) - 18,000 kg permissible gross weight - 22,000 kg technically max. permissible gross weight for winter service - Front axle with hub reduction drive, rear axle HP-1352 - Increased front axle load capacity to 10,000 kg for winter service up to max. 62 km/h - 11,500 kg permissible rear axle load, 13,000 kg technical rear axle load - 9,500 kg spring load capacity front axle, 13,000 kg spring load capacity rear axle - Winter service hydraulics, dual circuit, with screw couplings, Küpper-Weisser - 2 hydraulic pumps on engine, 11 ccm and 22.5 ccm - Front mounting plate - Winter service lighting - Heated windscreen - TGS NN medium-length cab with rear window - Wheelbase: 3,900 mm - MAN diesel engine D2676 LFAX, 382 kW (520 HP), 2,650 Nm torque - Euro 6 e engine - 4x4 drive - Front axle with hub reduction, driven, engageable - High clearance design - Differential locks front and rear axle - Meiller 3-way tipper approx. 4.80 m x 2.42 m x 0.60 m high - Front wall 0.80 m high - M-Jet steel side panels, HB 450, 2.5 mm - Platform floor in steel HB 400, 4 mm - Tie-down rings fully recessed in floor plate - Folding side boards on tipper bed - Rear wall of tipper pendulum mounted and partially folding, with manual claw lock - MAN TipMatic 12.28 OD with retarder 35 - Eco retarder - Transmission for increased traction during operation - MAN Idle Speed Driving transmission function - Rock-free transmission function - MAN TipMatic Performance and Efficiency driving mode up to 70,000 kg - MAN TipMatic Offroad driving mode up to 70,000 kg - MAN TipMatic Manoeuvre Mode (shunting mode) - Transfer case MAN G172 with road and off-road gears - Air conditioning, Climatronic - Additional water heater, 6 kW - Rockinger trailer coupling type 400 G 150A with Duomatic connection - 62,000 kg technically permissible gross train weight (Tech. Plus) - 44,000 kg trailer load Tech. Plus - Tipping hydraulics connections at rear - Front axle leaf and rear axle air suspension - Front axle AP 9 t, rear axle AP 13 t - Axle ratio i=3.63 - Stabilizer for front and rear axle - MAN Comfort Steering - Electronic brake system (EBS) - Full-brake assistant - MAN EasyStart anti-rollback feature - ABS, ASR, ESP - High-performance engine brake MAN EVBec, multi-stage - Cruise control - 310-litre aluminium fuel tank on the right - Fridge in cab - Sun visor - 2 rotating beacons on cab roof - Work lights - Multifunction steering wheel - MAN EasyControl Engine control panel, 2 functions, operable from outside with door open - Electrically adjustable and heated exterior mirrors - Electric windows Dodpfx Apoy E D Ehswjkr - MAN Media System 7-inch - MAN Advanced Sound System - Driver comfort seat, air-suspended, with lumbar support, adjustable shoulders and heating - Comfort-quality seat covers - New vehicle with day registration and MAN manufacturer's warranty from first registration Net price plus 19% VAT. Attractive financing options on request. All information supplied without guarantee; errors and prior sale excepted. Internal vehicl

Condition: used, empty load weight: 5,180 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2018, loading space length: 7,500 mm, loading space width: 2,440 mm, loading space height: 1,350 mm, loading space volume: 24 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2018, mileage: 407,974 km, Equipment: ABS, Unladen weight: 5,180 kg, permissible total weight: 36,000 kg, cargo area (L W H): 7,500 mm x 2,440 mm x 1,350 mm. Tire size: 385/65 R22.5, cargo volume: 24 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, foldable underride guard, front lift axle, electronic braking system (EBS), pendulum tailgate (overlapping), sliding roof tarp, platform, connector plug 1x15 and 2x7 pin, antispray, light alloy wheels. You can find our entire vehicle portfolio at . Interested in financing? With our Value Added Services, we offer you customized financing solutions, full-service and telematics services. We are happy to advise you. Dksdpfx Apox R Hbiswjr

Condition: used, empty load weight: 5,440 kg, axle configuration: 3 axles, first registration: 09/2016, loading space length: 7,430 mm, loading space width: 2,290 mm, loading space height: 1,430 mm, loading space volume: 24 m³, tire size: 385/65 R22,5, Year of construction: 2016, Equipment: ABS, Tare weight: 5440kg, Loading area (L W H): 7.430 mm x 2.290 mm x 1.430 mmRiepu izmērs: 385/65 R22.5, Loading area volume: 24 m³, 1. ass: , 2. ass: , 3. ass: , Paceliet asi, Elektroniskā bremžu sistēma EBS, Pendulum flap (top), jumta brezents, Piekļuves platforma, 1x15- un 2x7-pin spraudnis, Vieglmetāla diski, Dkedpfxjzhpnde Apwor

Condition: used, mileage: 502,465 km, power: 353 kW (479.95 HP), first registration: 05/2010, fuel type: diesel, empty load weight: 11,520 kg, maximum load weight: 6,480 kg, overall weight: 18,000 kg, tire size: 315/80R22.5, axle configuration: 4x4, wheelbase: 3,900 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, number of seats: 2, loading space length: 4,000 mm, loading space width: 2,420 mm, loading space height: 800 mm, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, crane, cruise control, differential lock, fog lights, low noise, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden. Steel superstructure, registration as a house, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, 16-speed manual transmission, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO, vertical exhaust, differential lock, fog lights, work lights, rotating beacon, leaf-air suspension, trailer coupling with air, light, and hydraulic connections, low-noise class G1, lashing eyes, underrun protection, pendulum flaps, roof hatch, crane mounted behind the cab, emergency stop, grab control, foldable, 2-point hydraulic support, four hydraulic extensions, green environmental badge. Wheelbase: 3900 mm. Superstructure: Meiller 3-way tipper body with spring-assisted drop sides & crane Palfinger PK 13001-K C. MAN HydroDrive, ZF 16S-252 OD gearbox! The vehicle received a replacement engine at MAN in 11/2020 at 409,587 km for approx. €33,500! Load chart: 3.8m-3150kg, 5.4m-2100kg, 7.2m-1500kg, 9m-1120kg! Djdoy Rzz Depfx Apwekr Loading height approx. 1430mm! Spare wheel available at extra cost! ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to changes, prior sale and errors.

Condition: used, mileage: 160,348 km, power: 175 kW (237.93 HP), first registration: 11/2013, fuel type: diesel, empty load weight: 8,000 kg, maximum load weight: 8,000 kg, overall weight: 16,000 kg, tire size: 275/70R22.5, axle configuration: 4x4, wheelbase: 3,300 mm, next inspection (TÜV): 04/2026, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 3,600 mm, loading space width: 2,350 mm, loading space height: 600 mm, Equipment: ABS, additional headlights, all wheel drive, cabin, cruise control, differential lock, fog lights, low noise, onboard computer, power assisted steering, seat heater, trailer coupling, Vehicle location: Bovenden, steel body, short wheelbase cab, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, Telligent automatic transmission, ABS (anti-lock braking system), PTO, raised exhaust, frame cover, differential lock, fog lights, high beams, work lights, storage box, leaf suspension, towing hitch with air, light, and hydraulic connections, low-noise G1, winter service equipment, lashing eyes, underrun protection, pendulum tailgates, crane mounting space behind cab. Wheelbase: 3,300 mm. Body: Meiller three-way tipper body with aluminium side walls. The vehicle received a new engine including particulate filter and rear silencer at 115,000 km! Dkedpfx Apszabzbswor Optional with loading crane 6 to 11 m/t for an additional charge of 7,000 to 17,000 EUR! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Condition: new, power: 290 kW (394.29 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,900 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, loading space length: 4,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Equipment: ABS, additional headlights, cabin, central locking, crane, cruise control, differential lock, fog lights, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden. ClassicSpace cab, Mercedes PowerShift 3, company-owned vehicle, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, sun visor, cruise control, air horn, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO, differential lock, fog lights, rotating beacon, leaf suspension, tow coupling (air, electric, hydraulic), aluminum tank, alloy wheels, lashing eyes, underrun protection, pendulum flaps, roof hatch, crane mounted behind cab, emergency stop, grab control, foldable, 2-point hydraulic support, radio remote control, four hydraulic extensions, green emissions sticker. Wheelbase: 3900 mm. Body: Meiller three-way tipper body with aluminum sideboards, pneumatic claw lock on rear wall, & Fassi F135AC.0.24 crane with radio remote control. 8t front axle, 13.4t rear axle with 300 planetary gear, electronic brake system with ABS and ASR (ABS can be deactivated), disc brakes on front and rear axle, condensate monitoring for compressed air system, electronic parking brake, stabilizer on front and rear axle, residual heat utilization, construction site filter, additional thermal insulation, light and rain sensor, comfort locking system, high-performance engine brake, Mercedes PowerShift 3, offroad driving program, PowerShift Advanced, multimedia cockpit, LED daytime running lights, MB 131-2c PTO pump, Meiller 7-piston pump type 270/63, comfort locking system, belt monitoring, PSM 2nd generation, protection package, pre-installation for toll detection, protective plate under tank, transmission oil cooling, lashing pockets in tipper floor, tipper floor 5mm thick, aluminum sideboards, steel front wall. Loading height approx. 1480 mm! Space between cab and tipper body approx. 1000 mm! Load diagram: 2.15m–5460kg, 3.5m–3250kg, 4.55m–2510kg, 6.45m–1590kg, 8.45m–1250kg, 10.50m–990kg. On request and at extra cost, can also be supplied with a different crane, e.g. Fassi F195 for a surcharge of EUR 10,000. THE 1ST AND 2ND PICTURES ARE SAMPLE PHOTOS ONLY! Brand new vehicle from stock with day registration on 24.11.2025! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale and errors! Dedpfx Apexn Auqswskr

Condition: used, mileage: 287,044 km, power: 294 kW (399.73 HP), first registration: 08/2015, fuel type: diesel, empty load weight: 13,620 kg, maximum load weight: 12,380 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,800 mm, next inspection (TÜV): 08/2025, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, loading space length: 6,600 mm, loading space width: 2,480 mm, loading space height: 950 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, crane, cruise control, differential lock, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, Mtlg. Haus, 1x comfort seat, seat heating, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, cruise control, navigation system, auxiliary heating, ABS (anti-lock braking system), traction control (ASR), constant throttle, power take-off, lifting + lowering, differential lock, fog lights, work lights, storage box, air-sprung, tow bar air + light, last axle liftable, last axle hydraulically steered, lashing eyes, U-protection, side aluminum underbody protection, pendulum flaps, roof hatch, crane at the rear, emergency stop, grapple control, high seat, 2-point hydraulic support, radio remote control, 3x hydraulic. Extensions, green environmental badge Wheelbase: 4800 mm Structure: Dinkel flatbed structure with aluminum side walls & rear crane Palfinger PK 20001-K B with high seat & radio control (remote control) Load diagram: 4m-4800kg, 6m-3150kg, 8m-2300kg, 10.2m-1800kg! Pallet fork available for an additional charge of €3,500.00 net! UVV until 02/2025! 2546h! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Dksdpexz Rwaofx Apwer - .

Condition: used, mileage: 275,080 km, power: 290 kW (394.29 HP), first registration: 05/2017, fuel type: diesel, empty load weight: 13,725 kg, maximum load weight: 12,275 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,900 mm, next inspection (TÜV): 01/2025, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, loading space length: 6,510 mm, loading space width: 2,490 mm, loading space height: 950 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, crane, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Active Brake Assist, Mercedes PowerShift 3, optional house, 1x comfort seat, heated seats, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, power take-off, differential lock, work lights, air suspension, air+light trailer hitch, aluminum tank, last axle hydr. steered, lashing eyes, U-protection, lateral aluminum driving protection, pendulum flaps, roof hatch, crane at the rear, emergency stop, grab control, high seat, 2-point hydraulic outriggers, 3x hydr, 3x hydr. extensions, green environmental sticker Wheelbase: 4900 mm Body: Platform body with aluminum side walls & rear crane HMF 2110-L3 with high seat Front axle air-sprung, 8t front axle, rear axle disc wheel 440 hypoid 13t, 7.5t trailing axle steered/relievable, electronic brake system with ABS and ASR, disc brakes on VA and HA, condensation water monitoring for compressed air system, additional stabilizer rear/trailing axle, front underride guard made of alu, residual heat utilization, PSM, starting aid, reversing alarm, ClassicSpace, comfort locking system, economy drive program, Mercedes PowerShift 3, pre-installation for toll collection, LED daytime running lights, cornering lights, High Performance Engine Brake, Powertrain Pack 1, transmission oil cooling, ESP, Lane Keeping Assist, Attention Assist, Active Brake Assist, MB 124-10c MPA N-/M-Speed auxiliary drive. Dsdpfx Aovhny Aopwokr Load chart: 5.5m-3490kg, 7.4m-2520kg, 9.3m-1950kg, 11.3m-1590kg. Pallet tongs available for an extra charge of € 2,900.00 net! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, mileage: 279,159 km, power: 290 kW (394.29 HP), first registration: 03/2016, fuel type: diesel, empty load weight: 14,580 kg, maximum load weight: 11,420 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,900 mm, next inspection (TÜV): 03/2025, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, loading space length: 6,510 mm, loading space width: 2,490 mm, loading space height: 950 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, crane, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Active Brake Assist, Mercedes PowerShift 3, optional house, 1x comfort seat, heated seats, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, power take-off, differential lock, work lights, air suspension, air+light trailer hitch, aluminum tank, last axle hydr. steered, lashing eyes, U-protection, side aluminum driving protection, pendulum flaps, roof hatch, crane at the rear, emergency stop, grab control, high seat, 2-point hydraulic outriggers, 3x hydr, 3x hydr. extensions, green environmental sticker Wheelbase: 4900 mm Body: Platform body with aluminum side walls & rear crane HMF 2110-L3 with high seat Front axle air-suspended, 8t front axle, rear axle disc wheel 440 hypoid 13t, 7.5t trailing axle steered/reliefable, electronic brake system with ABS and ASR, disc brakes on VA and HA, condensation water monitoring for compressed air system, additional stabilizer rear/trailing axle, front underride guard made of alu, residual heat utilization, PSM, starting aid, reversing alarm, ClassicSpace, comfort locking system, economy drive program, Mercedes PowerShift 3, pre-installation for toll collection, LED daytime running lights, cornering lights, High Performance Engine Brake, transmission oil cooling, ESP, Lane Keeping Assist, Attention Assist, Active Brake Assist, MB 124-10c MPA N-/M-Drahzahl auxiliary drive. Dsdpevhnyvefx Apwjkr Load chart: 5.5m-3490kg, 7.4m-2520kg, 9.3m-1950kg, 11.3m-1590kg. Pallet tongs available for an extra charge of € 2,900.00 net! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, Year of construction: 2016, MORBIDELLI AUTHOR M400 KEY FEATURES 5-AXIS MACHINING HEAD "PRISMA: QUALITY AND PRODUCTIVITY AT THE HIGHEST LEVEL" XILOG MAESTRO SOFTWARE: EXTREMELY SIMPLE PROGRAMMING MATIC WORKTABLE: ONE POSITIONING FOR MULTIPLE MACHINING OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (stop inner side) mm 3,680 Working area Y-axis (max. loadable workpiece on rear stops) mm 1,680 Workpiece passage Z / Number of Z axes mm 170 / 1 Workpiece length with pendulum machining mm 1,650 Traverse speed X-Y axes Pro-Speed m/min 85 Speed Z-axis m/min 30 INSTALLATION Installed power KVA 62 ÷ 82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air speed m/s 25 Extraction nozzle diameter mm 250 GENERAL FEATURES CNC-controlled drilling and milling center in a portal design and worktable with workpiece supports, for performing: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Groove milling with disc cutters - general milling operations 3-4-5 axes MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel. It is reinforced by welded-in supports over the entire machine bed, making it extremely stable. The table design, with a large base, is the secret to ensuring lasting precision and stability. The machine layout enables the user to have an optimal workflow with a minimum of space requirements. The mobile portal beam is made of a solid monoblock. It is positioned in the X direction on prismatic ground guides via ball screw slides. On this mobile aggregate carrier, the working aggregate is in turn attached to prismatic, ground guides and ball screw slides. AXIS MOVEMENT The displacement of all axes takes place on prism linear guides with a large cross-section and ball screw shoes with a large contact surface, which ensure optimal sliding even at the highest speeds and accelerations. The precise and fast positioning of the moving portal (X-axis) is achieved by a pinion and rack with helical teeth. Ball screws with a large cross-section ensure the accurate positioning of the work unit along the moving portal (Y and Z axes). MOTORS, DRIVES AND INVERTERS The perfect mechanical dynamics and maximum positioning accuracy are controlled by the high-quality drives and brushless motors, which are designed to achieve a speed of up to 90 m/min while maintaining the best surface finish. CONTROL The control unit consists of a numerical control for the milling and drilling machine with "Xilog Maestro" graphical user interface on a Windows 7 operating system - LCD color screen 17 - Qwerty keyboard - Swiveling control panel - Machine operating interface with Xilog Maestro software Xilog Maestro Features Programming - parametric graphical programming - Import of DXF files (2D; the geometries "SPLINE", "POLYLINE 3D", lines or circle interpolation in three axes, linear in space, spiral in the selected plane - supported programming with graphics and syntax aids for drilling and milling operations - automatic optimization of drilling operations and tool changes - cycles - possibility of panel zero-point shift to perform drilling on inclined or curved panel sides Dkjdpfxsy Dta Sj Apwsr

Condition: used, Year of construction: 2007, Working area: 2780 x 1140 mm (vertical milling) 2500 x 950 mm (horizontal drilling) X-Y travel: 2980 x 1271 mm Z-axis travel: 200 mm Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. On this mobile unit carrier, the working unit is mounted on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit: Drilling head with 10 + 4 spindles · 6 individually accessible vertical spindles in X · 4 individually accessible vertical spindles in Y · 2 horizontal spindles in X (1 + 1) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fitting · Extraction nozzle: D = 160 mm Vertical milling unit (position 2) · Tool chuck HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Right-hand / left-hand rotation · Ceramic bearings · Scope of delivery: 4 tool chucks (right) without collet chuck · Tool changer · Side-mounted tool magazine 7-way (TR7) with full encapsulation to prevent chipping · 7 tool positions for HSK 63F tool holder arranged in a row · maximum tool diameter D=120 mm · maximum weight per holder 4.5 kg · maximum tool weight of all tools 20 kg (TR7) · angular gears can be accommodated Horizontal milling unit (position 1) Horizontal unit with two opposite outputs for milling and grooving. · Speed 9,000 - 18,000 rpm continuously variable via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Bore saw blade (ER 32): 50 mm · Mandrel diameter saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum freedom of movement. The vacuum quick clamping system ensures maximum flexibility with precise positioning and optimal grip of the workpieces. · 4 supports 900 mm continuously adjustable in X · 8 vacuum suction cups round D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) · 1 stop in Y per support (total 6) · The retractable reference stops are controlled via CNC. · Scope of delivery: 4 plug-on adapters for suction cups · Pendulum machining standard (2 working areas) Axis movement The drive system in X, Y and Z is carried out via ground ball screws of the highest precision class. The ball drive screw of the X-axis is located exactly in the center Dedpfx Apsx Twdyswokr

Condition: used, Year of construction: 2006, * Work area: 2,650 x 1,240 mm * X-Y travel: 2,995 x 1,385 mm * Z-axis travel: 200 mm * Clearance height: 180 mm C-axis deactivated - 3-axis machine The structure of the base body is a monolithic construction made of thick-walled steel. It is reinforced throughout the machine bed by welded triangular plates, making it extremely stable. The triangular shape used for the supporting parts, with a large base, is the key to long-lasting precision and stability. The machine's layout allows the user an optimal workflow despite minimal space requirements. The base body, constructed in this way, provides the machining unit with a balanced and secure base with particularly good load distribution. The mobile unit carrier is made from a solid monoblock. It is positioned in the X-direction on prismatically ground guides via ball screw slides. The machining unit is, in turn, attached to the mobile unit carrier on prismatic, ground guides and the ball screw slide. Description of units and accessories (base) Drilling unit: Dodpfox Twccox Apwjkr Drilling head with 12 + 6 spindles * 7 individually selectable vertical spindles in X * 5 individually selectable vertical spindles in Y * 4 horizontal spindles in X (2+2) * 2 horizontal spindles in Y (1+1) * Speed: 4,000 1/min * Power: 2.2 kW * Grid: 32 mm * Drill chuck: M 10 with Morse taper No. 11 Nut saw unit in "X": * Integrated in the drilling head * Nut saw blade with a diameter of up to max. 120 mm Main milling unit (Position 2): * Tool holder HSK 63F * Speed 1,500 - 24,000 1/min, stepless via inverter * Motor power 4.4 kW (6 hp) from 12,000 1/min (S1) * Motor power 6.6 kW (9 hp) from 12,000 1/min (S6) * Right/left rotation * Ceramic bearings * Scope of supply: 4 pcs. tool holder (right) without collet Tool changer R8L Automatic tool changing device for 8 tools. Mounted on the rear unit carrier for quick access to the tools. * Number of tool positions: 8 * Max. tool diameter: 120 mm * Max. weight per tool: 4.5 kg * Max. total weight of all tools: 22 kg * Holder for 1 angular gear * Mounted and moving in X Horizontal milling unit (Position 1) Horizontal unit with two opposite outlets for milling and grooving. * Speed 9,000 - 18,000 1/min, stepless via inverter * 1 outlet for collet 3-20 mm (ER 32) * 1 outlet for saw/collet 3-12 mm (ER20) (For saw D=120 mm / bore 50 mm) * Motor power 3 kW (4 hp) * Max. tool diameter, front milling: 20 mm * Max. tool length, front milling: 110 mm * Max. tool diameter, rear milling: 12 mm * Max. tool length, rear milling: 80 mm * Max. saw blade diameter: 100 mm * Bore in saw blade (ER 32): 50 mm * Arbor diameter, saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum "freedom of movement". The vacuum quick-clamping system offers maximum flexibility with precise positioning and optimal workpiece clamping. * 6 supports 1000 mm, stepless pneumatically adjustable in X * 12 vacuum suction cups, round D = 110 mm, steplessly adjustable in Y (2 pcs. per support) * 2 stops in X (1 x left / 1 x right) * 1 stop in Y per support (total 6 pcs.) * The retractable reference stops are CNC-controlled * Pendulum machining standard (2 working areas) --- other clamping systems are available as optional extras --- Axis movement The drive system in X, Y and Z is via ground ball screws.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 36,604 h, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, overall weight: 9,500 kg, number of axes: 4, This 4-axis AXA DBZ vertical machining centre was manufactured in 2010. It features an impressive X-axis travel of 2 x 750 mm for pendulum processing, Y-axis travel of 500 mm, and Z-axis travel of 600 mm. The machine includes a NC rotary table with hydraulic counter bearing and a plate-type tool changer. If you are looking to get high-quality machining capabilities, consider the AXA DBZ vertical machining centre we have for sale. Contact us for further details. • Spindle hours: 36,604 h (verified via image) • Machine ON hours: 81,189 h • Overall dimensions: 4500 × 2250 × 2700 mm Dsdpfxoy Edv Hj Apwskr • Voltage: 400 V • Frequency: 50 Hz • Total power requirement: 45 kVA • Full load current: 65 A • External fuse: 80 A • Tool changer: Plate-type tool changer • Design/configuration: Traveling column; Left/Right work areas (pendulum machining) • Safety/enclosure: Maintenance door Additional equipment • NC rotary table RTA 200 with hydraulic counter bearing (4th axis) • Clamping system: Hydraulics for right/left work areas, incl. rotary union for 4th axis • Internal coolant supply (IKZ) • Chip conveyor • Emulsion (coolant) system • Recooling unit (chiller)

Condition: used, Slow-speed pre-shredder for rubber, plastic, cables, composite materials Well-suited for material composite separation, e.g. tires, scrap cables With integrated safety shear coupling for protection against foreign objects Rotor: 600 mm diameter x 1450 mm working width Enclosed rotor with staggered segment knives, mounted on cassettes 24 rotor knives, 2 stator knife rows Swiveling screen basket, perforation as required With feed device (pendulum arm) Dkjdszmdfnjpfx Apwer Drive power: 90–200 kW

Condition: used, Slow-speed pre-shredder for rubber, plastic, cables, composite materials Well-suited for material composite separation, e.g. tires, scrap cables With integrated safety shear coupling for protection against foreign objects Rotor: 600 mm diameter x 1450 mm working width Enclosed rotor with staggered segment knives, mounted on cassettes 24 rotor knives, 2 stator knife rows Swiveling screen basket, perforation as required Dedpfx Apozmc Sgswekr With feed device (pendulum arm) Drive power: 90–200 kW

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 1,685 h, maximum speed: 80 km/h, overall weight: 11,500 kg, total height: 2,500 mm, total length: 9,720 mm, total width: 2,300 mm, mobility: mobile, machine/vehicle number: 11520, For sale is this used Husmann HFG IV (HFG4) shredder, year of manufacture 2016. Operating hours: 1685 h All 60 flail tips were replaced just a few operating hours ago. Some spare flails are still available and will be included in the sale. All 8 V-belts were also replaced just a few operating hours ago. Dsdpfx Apjy Hi D Sswskr Both NOx sensors as well as AdBlue sensors are new. Important note: Drawbar is bent, therefore currently not road-legal. Throughput: 60-100 m³/h depending on material and feeder equipment Recommended max. log diameter: 200 mm Machine No.: 11520 Max. revolutions per minute: 1200 rpm Operating voltage: 24 V Operating pressure: 160 bar Power: 205 kW Permissible total weight: 11,500 kg Manufacturer’s Description: FLAIL SHREDDER HFG VI "These powerful Husmann machines, designated “HFG (Husmann forestry equipment)”, achieve a uniform, fine, and clean shredding result thanks to their special beating technology and flail arrangement. The shredded material is fed via a spacious intake hopper with forged steel chain conveyor to the infeed roller and onward to the flail rotor. The pendulum-mounted infeed roller is guided by rack-and-pinion and driven hydraulically by a large reduction gearbox. Adaptable to the material being fed, the roller can also be operated and lifted by remote control. The roller or feed aperture of 460 mm ensures smooth and fast feeding. The robust rotor, made from high-grade steel (1000 kg), reinforced with additional bracing and mature construction techniques, is break-proof even when processing heavy foreign materials. Sixty free-swinging flails are arranged in offset positions on eight hardened flail shafts. The quick-change system allows the carbide-tipped flail tips to be bolted on to the flail holders. With the large number of 50 mm wide flails and the rotor’s direction of rotation across a breaker bar towards the infeed belt, the shredding material is optimally fragmented and made compostable. The load-dependent and continuously adjustable feeding speed of the scraper floor and infeed roller allows further influence and improvement of the output product quality. The rotor trough and discharge area design allows for windrow heights up to 2.5 meters. The powerful 205 kW auxiliary engine is easily accessible through large service doors, making operation and maintenance simple. Clear controls and safety features such as rotor overload protection and a reversing device are quality hallmarks of our plant. The mobile shredding unit is equipped with an 80 km/h running gear and air brakes, and can be configured either stationary or with a hooklift frame. The HFG IV is a composting machine for organic and inorganic waste, suitable for mechanical feeding." If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2015, This 4-axis HOMAG PROFI BMG 511/60/12/R was manufactured in 2015. A robust CNC processing center featuring an 18-position tool changer, a drilling head with 30 spindles, and a dynamic table area allocation. It boasts a main milling spindle with a power of 12 kW and a speed range up to 24,000 rpm. Ideal for complex woodworking tasks with its extensive working area of 6,000 x 1,550 mm. Contact us for more information about this machine. • Working area: 6,000 x 1,550 mm • Workpiece parameters: • Length (single setup): 6,000 mm • Length (pendulum operation): 1,550–3,200 mm • Width: max. 1,550 mm (with rear stop and milling cutter Ø25 mm) • Workpiece thickness: up to 275 mm including clamping devices; up to 60 mm with standard clamping equipment • Speed Pack: X-axis maximum feed 80 m/min • X-axis speed: 80 m/min • Tooling: • Tool transfer station on left side of machine bed • Disc-type tool changer: 18 positions • Capacity options: 18 x Ø130 mm tools, or 9 x Ø180 mm + 9 x Ø70 mm tools • Max aggregate length: 320 mm • No tools included • Main milling spindle: • 12 kW (S6) / 9.5 kW (S1) • Frequency-controlled 0–24,000 rpm • C-axis: • With aggregate interface; unlimited swivel range Dkedpfxsx D Ra Hj Apwsr • Interface for FLEX-5 aggregate (aggregate not included) • Drilling head (30 spindles) – V20 / H10 / S360° “MPU”: • C-axis ±185° for drilling/sawing at any angle • 20 vertical high-speed spindles with quick-change • Vertical spindle layout (U-shape): 3 rows with 11, 3, and 6 spindles, 32 mm spacing • 10 horizontal spindles: 4 pairs at 32 mm spacing; 1 pair at 320 mm spacing • Grooving/separation saw: for blade diameters up to Ø200 mm • Table/base: • Grid table with slotted aluminum profile • Dynamic table area allocation (R-table): automatic part size check; vacuum zones permanently assigned to machining fields • Control/software: • POWERCONTROL PC 86 POWERTOUCH • 21.5" Full HD multi-touch display • WoodWop graphical, dialog-based CNC programming • Vacuum: Supplied via customer-side vacuum system (no integrated vacuum pump)

Condition: used, maximum load weight: 2,860 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 12/2022, total width: 2,320 mm, Year of construction: 2022, The new ALGEMA FIT-ZEL® EURO-TRANS is the innovative trailer for professional car transport. Dkodpszq Hbyofx Apwer Fitzel Algema Eder Euro-Trans 35-22/53X tarpaulin trailer, pendulum axle, 100 km/h approval, single owner, used twice, no signs of wear, as new condition. Gross weight 3,500 kg, Tare weight approx. 640 kg (including special equipment), payload 2,860 kg X-Line pendulum axles for 100 km/h approval Lift axle preparation Tyres: 195/50 R13C 104N M+S on alloy rims Loading dimensions: 5,300 x 2,180 mm, loading height 660 mm Overall dimensions: 6,620 x 2,220 mm, approach angle approx. 7.5° Standard equipment: • Pendulum axles with 100% load compensation • ALU loading platform, easily tiltable due to center-of-gravity shift with descent and tilt damper • 2 extractable and infinitely laterally adjustable ALU loading ramps, centrally lockable, operable from both sides, lockable • 2 rubber buffers per loading ramp for safe locking when retracted • Lashing straps, attachable on both sides at over 50 lashing points, for legally required load securing • 1 certified load securing according to TÜV certificate no. LS1206430Z1 • 1x 13-pin plug connection cable, 1 metre long, 12 volts • 8 large rear lights incl. 2 reverse lights and 2 rear fog lights • 2 rear outline marker lights, 4 orange side marker lights and 2 white front position lights - for your safety • 1 heavy-duty jockey wheel Ø 60 mm with safety chain • 1 maneuvering support wheel at the front allows for easy single-axle maneuvering with rubber-sprung axle • Reflective side stripes for your safety - F-band • 2 rear rolling supports • 2 driving tracks (550 mm wide, roughened) for safe, slip-free loading • 1 pre-tensioned platform • 1 automatic locking system • Bolted, anodized chassis • Shock absorbers required for 100 km/h approval Included special equipment: • Aluminum floor plate • High tarpaulin 5.30 x 2.30 x 2.00 m (internal loading dimensions LxWxH) - Complete aluminum frame with 2 support wheels, rollable as a unit - Front chamfered 600 x 600 mm - Incl. truck-grade tarpaulin, color black - Roll-up by hand on all 4 sides - Auxiliary loading mirror fitted front left - Winch clamp holder at the front right of the tarpaulin frame (tarpaulin height customizable) • Tarpaulin color: RAL black • High rear tailgate for tarpaulin • Right-hand side flap • Sliding curtain left and right Empty weight incl. special equipment only approx. 640 kg = 2,860 kg payload! - New list price according to equipment: €31,050 net plus €190 COC paper/document - Despite our best efforts, errors within the advertisement cannot be excluded. Subject to errors and prior sale!