Used Plastic Injection Machine for sale (67,206)

Condition: used, Year of construction: 1999, functionality: fully functional, clamping force: 500 kN, screw diameter: 25 mm, displacement volume: 67 cm³, injection pressure: 2,000 bar, injection weight: 137 g, mold height (min.): 200 mm, ejector stroke: 100 mm, opening stroke: 450 mm, plate length: 320 mm, plate width: 320 mm, type of input current: three-phase, pressing force: 50 t, For sale: a fully operational machine from 1999. Nwjdpfx Aeycrzdof Ieb

Condition: used, Year of construction: 1999, functionality: fully functional, clamping force: 750 kN, screw diameter: 28 mm, displacement volume: 74 cm³, injection pressure: 2,500 bar, injection weight: 78 g, mold height (min.): 200 mm, ejector stroke: 100 mm, opening stroke: 450 mm, plate length: 400 mm, plate width: 400 mm, type of input current: three-phase, pressing force: 75 t, For sale: a fully operational machine from 1999. Nwedpfx Asycq H Ssf Isb

Condition: used, Year of construction: 2001, functionality: fully functional, clamping force: 500 kN, screw diameter: 35 mm, displacement volume: 145 cm³, injection pressure: 1,820 bar, injection weight: 149 g, mold height (min.): 200 mm, ejector stroke: 125 mm, opening stroke: 350 mm, plate length: 320 mm, plate width: 320 mm, type of input current: three-phase, pressing force: 50 t, Machine from 2001 for sale, fully operational. Nsdpfx Aoycqzpef Iowb

Condition: good (used), Year of construction: 2001, Ref. no.: 18587 Hersteller: FERROMATIK MILACRON Type: K-200 S Year of construction: 2001 Nwedow Hc Spopfx Af Ieb Clamping unit Clamping force: 200 ton Opening stroke: 750 mm Distance between tie bars: 560 x 560 mm Mould height min.: 300 mm Opening width: 1050 mm Platen size (h x v): 830 x 830 mm Injection unit Screw diameter: 50 mm Injection volume: 416 cm³ Shot weight: 375 g Measurements and weight Dimensions: 6,9 x 2,0 x 2,6 m Machine weight: 13000 kg

Condition: used, Year of construction: 2001, Technical details: screw diameter: 30 mm closing force max.: 2000/ bei 175 bar kN opening force: 10 t screw revolutions per minute : 100 U/min control: FA-Inject 2000SIJECT OP37 Nodpfx Aeu Nu N Rjf Iswb system pressure: 175 bar injection pressure max.: 1600 bar injection volume max.: 800 cm³ closing speed: 200 mm/min ejection stroke: 150 mm force of ejector: 120 kN opening stroke: 550 mm daylight: 700 mm total power requirement: 36,5 kW weight of the machine ca.: 6,0 t dimension machine xH: 3,0x1,9x3,9 m dimensions electric cabinet LxWxH: 0,8x0,6x2,15 m Plastic Injection Molding Machine - Elastomer Injection Moulding Machine - with heatable support table and heatable tool supporting plate - best suited for the production of special sealing products - tank volume hydraulics 110 l, heating and cooling method thermal oil circulation system, nozzles stroke 20mm - nozzle type: single nozzle, heating capacity per heating plate: 8,1 kW, heating plate size 600x500mm, heating plate temperature=250°C The machine is not connected. We sell the machine as described and as is *

Condition: like new (used), Year of construction: 2022, Manufacturer: Krauss-Maffei Year of manufacture: 2022 Power-on hours: 604 Operating hours: 463 h Machine number: 61035748 Type / Model: KM 65-380 CX Clamping force: 65 t Minimum mould installation height: 250 mm Opening stroke: 750 mm Max. distance between mounting plates: mm Clear tie bar spacing: 420 x 420 mm Mounting platen dimensions: 670 x 670 mm Screw diameter: 35 mm Max. dosing volume: 154 cm³ Shot weight (PS): 140 g Hold pressure: kN Connection: 32 kW Accessories/Equipment: 1 core pull, 1 air valve Condition: Very good Nwsdpfxsyapyfe Af Iob Weight: 3.9 t Dimensions: 4,000 x 1,500 x 2,000 mm

Condition: used, Year of construction: 2004, operating hours: 69,264 h, functionality: fully functional, clamping force: 350 kN, screw diameter: 28 mm, clearance between the columns: 500 mm, injection pressure: 1,577 bar, injection weight: 56 g, mold height (min.): 200 mm, ejector stroke: 80 mm, A used BOY 35A VV - Vertical plastic injection molding machine. The machine is well maintained, fully operational, and has been regularly serviced. Nwodjycqkkspfx Af Ieb Technical data: Year: 2004 No. of working hours: 69,264 Cylinder: 28mm, 55.8g for PS, 1,577 bar Daylight between tie bars: 280×254mm Minimal mould height: 200mm Max. daylight between platens: 500mm Ejector stroke: up to 80mm (adjustable) Hydraulic nozzle with needle R35 Incoterms: EXW Vrhnika, Slovenia

Condition: used, Year of construction: 2021, operating hours: 5,048 h, functionality: fully functional, machine/vehicle number: 245467, ENGEL DUO 17060/2000 injection moulding machine with ENGEL Viper 60 robot (robot working area, conveyor belt) – year 2021 For sale: ENGEL DUO 17060/2000 injection moulding machine, year of manufacture 2021, in excellent technical condition. The machine has been regularly serviced and operated in stable production conditions. Technical data and information: - Manufacturer: ENGEL - Model: DUO 17060/2000 - Clamping force: 2000T - Year of manufacture: 2021 - Operating hours: 5048 h - Type: two-platen injection moulding machine - Condition: very good, fully functional Additional equipment: Nwsdpoycc N Sofx Af Isb - ENGEL Viper 60 robot – perfectly matched to the machine, ready for direct integration into a production line, robot working area, conveyor belt. Offer advantages: - Low number of operating hours - Modern, energy-efficient design - High process repeatability and precision - Complete package: injection moulding machine + robot, robot working area, conveyor belt Ready for immediate commissioning

Condition: used, Demag Ergotech 3300-840, Demag injection molding machine, used machine Manufacturer : Demag, Sumitomo Model: Ergotech 3300-840 Overall dimensions : Length x Width x Height: 6.5 x 2.0 x 2.2 meters Net weight (without oil): 13 800 kg Nodpfx Afox Sqi He Iowb TECHNICAL DATA (BY SCREW DIAMETER) ----- Description Unit "A" "B" "C" ----- Screw diameter: [mm] 45 50 60 L/D ratio: [-] 20 20 20 Injection pressure (at 400 °C): [bar] 2402 1946 1351 Shot volume: [cm3] 358 442 636 Shot weight (PS): [g] 320 400 570 Barrel heating power: [kW] 13.0 14.8 23.1 Installed electrical power*: [kW] 58/68 60/70 68/78 ----- * Note: Values are higher with electric screw drive (WA). INJECTION UNIT FEATURES ----- Max. dosing stroke: 225 mm Max. nozzle retraction: 470 mm Nozzle immersion depth: 40 mm (SVO) / 30 mm (SPI) Nozzle contact force: 80 kN Electric screw drive (WA): 20.5 kW Material hopper capacity: 75 liters GENERAL AND HYDRAULIC DATA ----- Hydraulic oil tank capacity: 700 liters Pump unit power: 45 / 55 kW Dry cycle (EUROMAP 6a): 1440 / 1600 h-1 Dry cycle (without nozzle movement): 1890 / 2100 h-1 Continuous noise level: 74 dB (A)

Condition: excellent (used), Year of construction: 2007, clamping force: 2,000 kN, screw diameter: 55 mm, displacement volume: 618 cm³, injection pressure: 2,183 bar, injection weight: 562 g, mold height (min.): 400 mm, ejector stroke: 180 mm, Engel VC 1350/200 Tech Clamping force: 200 tons Year of manufacture: 2007 Weight: 14,200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Injection unit: .../1350 Screw diameter: 55 mm Injection volume: 618 cm³ Shot weight (for PS): 562 g Specific injection pressure: 2,183 bar Mould clamping system: 200/... Mould platen dimensions: 860 x 570 mm Mould installation height: 400 mm Opening stroke: 750 mm Maximum platen distance: 1,150 mm Ejector stroke: 180 mm Ejector force: 80 kN Nedpfx Asya D Epjf Iowb Equipment: - 2 × hydraulic core on moving platen - Pneumatic valve - 8 hot runner zones - 8-section rotameter

Condition: excellent (used), Year of construction: 2007, clamping force: 1,500 kN, screw diameter: 45 mm, displacement volume: 305 cm³, injection pressure: 2,050 bar, injection weight: 270 g, mold height (min.): 275 mm, Demag IntElect 150/520-610 General Information Nwodpfx Afjxxrr Ts Iob Year of manufacture: 2007 Weight: 6,900 kg Dimensions (L × W × H): 5.5 × 1.5 × 2.1 (2.3) m Control system: NC4 Operating hours: 26,500 h Clamping Unit Clamping system: 150/... Clamping force: 150 t Platen dimensions (H × V): 770 × 770 mm Tie bar clearance (H × V): 520 × 520 mm Mould height (min.–max.): 275 mm (max. increased) Max. distance between platens: 1180 mm Ejector stroke: 125 mm Ejector force: 35 kN Injection Unit Injection unit type: …/610 Screw diameter: 45 mm L/D ratio: 20 Injection volume: 305 cm³ Shot weight: 270 g Specific injection pressure: 2050 bar Wear-resistant screw; bimetallic barrel, standard L:D Three-piece ring-type non-return valve (RSP) Increased injection speed: 300 mm/s Additional Equipment Hour counter reading: 26,500 h - Increased mould mounting height (min. unchanged, max. extended) - Wear-resistant screw; bimetallic barrel; standard L:D; screw diameter 45 mm - Three-piece ring-type non-return valve (RSP) - Electro-hydraulic interface for connecting 2 hydraulic cores on the moving mould plate, via a separate hydraulic unit - Increased injection speed (300 mm/s) - Increased mould mounting height (min. unchanged, max. extended) Offer for the injection moulding machine only

Year of construction: 2016, condition: ready for operation (used), A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 9171h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible. Nwodpfxoyab I Us Af Ieb

Year of construction: 2016, condition: ready for operation (used), A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 13361h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible. Nodpfx Afsyab Nfo Iswb

Condition: excellent (used), Year of construction: 2015, operating hours: 68,946 h, functionality: fully functional, In operation Hours: 68946 h. Clamping force: 1500 kN Clamping unit 520 H Opening force / stroke: 450 mm. Fixed / variable mould mounting height: 250-550 mm. Fixed / variable platen spacing: 700-1000 mm. Column spacing: 520 x 520 mm Mold clamping platens (width x height) 695 x 695 mm. Weight of movable mould half: 1000 kg max. Force – Ejector stroke: 40 kN – 175 mm Idle cycle time: Conformt Min 1.5 – s- 364 Screw diameter: 40 mm. Effective screw length: 20 L/D Screw stroke: 160 mm. Nwodpjyab R Nofx Af Iob Calculated injection volume: 201 cm3 Weight per injection: 184 g. Ps. Material flow rate: 29 kg/h. PS Injection pressure: 2000 s-bar Post-pressure time: 45-2000 s-bar Injection flow: 214 cm3/s Injection speed: 170 mm/s Power – heating zones: 9.7 kW – 5 Oil capacity: 160 l. Weight: 6700 kg. Height: 2215 mm. Length: 4672 mm. Complete installation also available: Injection moulding machine + WITTMANN W818-2066 (2013) Robot + Conveyor belt Robot WITTMANN W818-2558 (2013)

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 17,300 h, A used cooling unit from the Swiss manufacturer TOOL TEMP AG Model: TT 54000 Year of manufacture: 2008 Operating hours: 17,300 Location: Upper Franconia _____ Our general terms and conditions apply. The seller is not liable for any typing or data transmission errors. Njdpfx Aox Tr I Hef Iswb All details and photos have been provided by the owner and released for publication. The appearance of the listed items corresponds to their age and the images shown. The condition of the technology and wear is appropriate for the age of the items. Used machinery is sold exclusively to commercial customers and without any warranty.

Condition: used, Year of construction: 2005, Technical details: screw size: 70 mm injection shot weight in Polysterol: 687 g/PS closing pressure: 3000 kN weight of the machine ca.: 19,4 t PreHeating unit and airsoaking unit is not in package !! Njdpfx Afowftr Do Iewb *

Condition: used, Year of construction: 2005, Technical details: screw size: 90 mm Nedpfjtunccex Af Iowb injection shot weight in Polysterol: 1.758 g/PS closing pressure: 6500 kN weight of the machine ca.: 32 t Out of serial production *

Condition: used, Year of construction: 2001, Technical details: screw size: 105 mm injection shot weight in Polysterol: 4.940 g/PS closing pressure: 9000 kN weight of the machine ca.: 19 t Out of serial production Machine and Robot condition regularly checked by EngelCare program Linear robot on machine was fully refurbished in 2021 Nedpfjtuncvjx Af Iowb *

Condition: used, Year of construction: 2004, Technical details: screw size: 105 mm injection shot weight in Polysterol: 4727 g/PS closing pressure: 2300 kN plate size: 2830 x 2400 mm opening stroke: 3700 mm daylight: 1100-1800 mm Nwsdpfxetrbcbe Af Isb injection volume: 5195 ccm injection pressure max.: 2296 bar dimensions: 14,2 x 4,15 x 2,84 mm total wight: 143 t tie bars distance: 2000 x 1600 mm Robot system core pulls hot runner controller -     The machine is in a very good condition       -     Additionally complete cutters available. -     A conveyor belt and Robot Systems(Model 2012) *

Condition: used, Year of construction: 2015, Technical details: Nwodpfx Asw I E R Nsf Isb closing pressure: 6600 kN weight of the machine ca.: 45,5 t

Condition: used, Year of construction: 1999, Technical details: screw size: 45 mm injection shot weight in Polysterol: 149 g/PS closing pressure: 100 kN Nwsdpfowvkggox Af Ijb

Condition: used, Year of construction: 1999, Technical details: Njdpswvkgmefx Af Iewb screw size: 45 mm injection shot weight in Polysterol: 149 g/PS closing pressure: 1250 kN

Condition: good (used), Year of construction: 2003, operating hours: 55,933 h, functionality: fully functional, machine/vehicle number: 26195, clamping force: 350 kN, screw diameter: 25 mm, clearance between the columns: 270 mm, displacement volume: 42 cm³, injection pressure: 175 bar, injection weight: 50 g, We are selling a Battenfeld 350 plus/75 plastic injection molding machine, year 2003. The pump has been replaced. The machine has 58,500 operating hours, works flawlessly, and is in regular operation. Nwedpfeya Ev Aox Af Ieb Clamping force: 35 T, shot weight: 50 g.

Condition: excellent (used), Year of construction: 2008, operating hours: 49,429 h, functionality: fully functional, machine/vehicle number: 208050, clamping force: 1,000 kN, screw diameter: 35 mm, clearance between the columns: 420 mm, displacement volume: 137 cm³, injection pressure: 2,000 bar, injection weight: 140 g, mold height (min.): 250 mm, ejector force: 25 N, ejector stroke: 150 mm, number of injections: 1, type of input current: three-phase, We are selling an ARBURG 420 C GOLD EDITION injection molding machine, manufactured in 2008. The machine has newly re-sealed clamping and injection units, operates perfectly and is in regular production use. Clamping force: 100 t Shot weight: 140 g Nsdpfeya Egusx Af Iswb Screw diameter: Ø35 mm The machine is equipped with: -connection for 3 hot runner nozzles -EUROMAP 67 interface -connection for a color dosing unit -connection for air blow / conveyor belt control The machine is sold without a robot. MATEJ LORENCI: +386-31-589-330

Condition: used, Year of construction: 2013, clamping force: 50 kN, displacement volume: 59 cm³, injection pressure: 2,500 bar, overall weight: 3,700 kg, load hours: 29,000 h, screw conveyor diameter: 25 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Manufacturer: Krauss Maffei Type: KM50-180AX Condition: aus laufender Produktion Operating hours: ca. 26.000 CLAMPING UNIT: - Clamping force: 50 t Öffnungsweg: 300 mm Mould installation height min.: 150 mm Mould installation height max.: 470 mm Tie bar distance (h x v): 410 x 360 mm Plate dimension (h x v): 510 x 460 mm Centering (fix- movingplate): 125 mm INJECTION UNIT: IU180 Screw diameter: 25 mm Injection weight in polystyrol: 54 g Stroke volume: 59 cm³ Einspritzdruck: 2.500 bar CONTROL: MC5 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 2 x (Hydr. Kernzug-Aggregat) Air valves: 2 Hot runner control devices: 6 Robot interface: Euromap 67 Other equipment: Qualitätsüberwachungspacket GENERAL DATA: - Installed heating capacity: 8,1 kW Pump drive power: entfällt Nodjppigdjpfx Af Iswb Total installed power: Motor + Heizung Total weight: 3.700 kg Total size L x B x H: 4,4 x 1,6 x 1,9 m