Used Plastic Injection Moulder for sale (7,565)

Condition: excellent (used), Year of construction: 2014, Boy 100E / Hybrid machine Year of construction: 2014 Injection unit: Ljdpfx Asz Ipf Hekqoru Screw diameter: 32 mm Injection weight: 92.3 g Injection pressure: 2127 bar Dosing volume: 96.5 ccm Clamping unit: Clamping force: 100 t Distance between tie bars: 430x360 mm Size of the clamping platens: 750x650 mm Ejector: hydraulic Clamping unit: hydraulic Control system: Procan Alpha 2 - touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Control system with air valve Hardened spraying unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Dimensions: Weight: 3530 kg Length/width/height: 4.37x1.21x2.20 m Drive: Pump/motor: 15 kW Heating output: 7.7 kW Total output: 22.7 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2013, Engel Victory 80/50 Spex with sprue picker Engel ER-USP5 / Hybrid machine Year of manufacture: 2013 Injection unit: Screw diameter: 18 mm Injection weight: approx. 22 g Injection pressure: 2200 bar Dosing volume: 25 ccm Clamping unit: Clamping force: 50 t Tie bar spacing: 0x0 mm Size of clamping plates: 500x450 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - Touchscreen Additional equipment: Tie-bar-less, hybrid machine: energy-saving and very quiet Air valve x 2 Control system with hot runner system x 6 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by an inverter - energy saving It is possible to change the screw diameter to 22 or 25 mm Purchase of the sprue picker at an additional cost Dimensions: Weight: 2900 kg Length/Width/Height: 3.30x1.60x2.30 m Lrjdpfoz Iqn Njx Akqeu All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2008, KRAUSSMAFFEI injection molding machine KM 1000-4300 MX SIDE INJECTION UNIT KM 380 BOLT-ON LRX ROBOT General Information Parameter Data Manufacturer KraussMaffei Model KM 1000-4300 MX Year of manufacture 2008 Serial number 61012454 Clamping force 11,000 kN (1100 t) Machine weight 54,000 kg Design Two-platen, hydraulic Number of injection units 2 Additional unit KM 380 BO L (Bolt-On) Robot KraussMaffei LRX Note: The KM 1000 designation indicates a 1000 t class, while the stated clamping force of 11,000 kN corresponds to 1100 t. 2. Clamping Unit Parameter Value Clamping force 11,000 kN Dimensions of mounting plates (H x V) 2210 × 1910 mm Column spacing (H x V) 1550 × 1250 mm Minimum mold height 600 mm Maximum mold height 1200 mm Opening stroke 2000 mm Ejector stroke 300 mm FP / MP centering rings 250 / 250 mm Maximum mold weight – fixed platen 25,000 kg Maximum mold weight – movable platen 25,000 kg Maximum total mold weight 50,000 kg Main injection unit – unit no. 1 Parameter Value Screw diameter 80 mm L/D ratio 23 Injection volume 1810 cm³ Volumetric injection rate 503 cm³/s Maximum hydraulic pressure 190 bar Maximum specific injection pressure 2328 bar Screw stroke 354 mm Specified maximum screw speed 955.8 – to be confirmed by the unit Additional side injection unit – unit no. 2 KRAUSSMAFFEI KM 380 BOLT-ON Parameter Value Manufacturer KraussMaffei Type KM 380 BO L Year of manufacture 2008 Serial number 61011975 Unit weight 2500 kg Type Additional side injection unit Screw diameter 40 mm L/D ratio 20 Injection volume 204 cm³ Volumetric injection rate 161 cm³/s Maximum specific injection pressure 1860 bar Screw stroke 160 mm Specified maximum screw speed 391 – to be confirmed by the unit The additional side injection unit enables the implementation of multi-component processes, including 2K technology, provided that a suitable mold and control configuration are used. Robot and automation The machine is equipped with a KraussMaffei LRX linear robot, designed to automate the process of removing parts from the injection mold. The robot model, its year of manufacture, serial number, payload, and ranges of motion for the X, Y, and Z axes need to be confirmed based on the nameplate or documentation. Hydraulic equipment and control Equipment Quantity / parameters Hydraulic mold cores – fixed platen (FP) 2 Hydraulic mold cores – movable platen (MP) 2 Total number of hydraulic core circuits 4 Lrodpe Adpc Dofx Akqsu Sequential injection control 16 zones Hot runner control 48 zones Main injection unit Ø 80 mm Side injection unit Ø 40 mm Robot KraussMaffei LRX Technological configuration The machine has two independent injection units, which allows it to be used in multi-component production. The configuration includes: • Main injection unit with an 80 mm screw. • Additional Bolt-On side unit with a 40 mm screw. • Four hydraulic core control circuits. • Sequential control of 16 zones. • Control of the mold hot runners – 48 zones. • KraussMaffei LRX linear robot • Transport data Element Weight KM 1000-4300 MX injection molding machine 54,000 kg KM 380 BO L side unit 2500 kg Total weight 56,500 kg

Condition: excellent (used), Year of construction: 2014, Sumitomo Demag Systec 210/580-430 with Sepro Success 22 robot / Hybrid machine Lsdpfsz Ipkcjx Akqsru Year of manufacture: 2014 Injection unit: Screw diameter: 35 mm Shot weight: 153 g Injection pressure: 2640 bar Dosing volume: 168 ccm Clamping unit: Clamping force: 210 t Tie bar spacing: 580x580 mm Platen size: 860x860 mm Ejector: hydraulic Clamping unit: toggle Controller: NC5 Additional equipment: Very good technical condition Hybrid machine: high-speed, energy-saving and quiet Operating hours: approx. 30,000 h in automatic operation Euromap 67 Robot interface Air valve x 9 Hydraulic needle core pull, controlled by a proportional valve x 1 Hydraulic core pull x 4 Air core pull x 5 Controller with hot runners x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by an inverter - energy saving Proportional valve on the injection unit – precise injection Parallel movements Integrated printer Dimensions: Weight: 8930 kg Length/Width/Height: 6.02x1.76x2.15 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, operating hours: 100 h, Gravimetric dosing and mixing system: Mixing system with 5 gravimetric dosing units 5 units: Lrsdpfx Aket S Rdueqsu • Gravimetric screw dosing unit • Feeding hopper with pneumatic rotary valve, each with a lid • Screw conveyor for feeding from a big bag, with height-adjustable individual stand 1 unit: • Trough screw for combining and conveying the dosed materials into a transfer container. 5 units: • Big bag feeding station, with a suspension crossbeam to prevent the big bag from collapsing during emptying. • Big bag disc base with discharge aid (vibration drive) Option not included in the price: Control cabinet including control system Delivery EXW

Condition: excellent (used), Year of construction: 2017, operating hours: 15,635 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 26 mm, displacement volume: 57 cm³, tie bars: 370 x 320 mm Mould height min: 150 mm Opening stroke: 270 mm Injection weight: 52 g Screw: 26 mm Lrodpfx Ae Ad N Erokqou Injection pressure: 2200 bar Auswerferkraft: 19,6 kN

Condition: excellent (used), Year of construction: 2014, Wittmann Battenfeld HM 150/750 Servo Power / Hybrid Machine / Operating hours: approx. 29,000 in automatic mode Year of manufacture: 2014 Injection unit: Screw diameter: 50 mm Injection weight: 402.2 g Injection pressure: 1,714 bar Shot volume: 442 ccm Clamping unit: Clamping force: 150 t Tie bar distance: 520x470 mm Dimensions of platens: 760x755 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6P - touchscreen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. 29,000 in automatic mode Total operating hours: 36,714 Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and corrosion-resistant Main drive motor - servo motor driven by inverter - energy saving Dimensions: Weight: 6,600 kg Length/Width/Height: 4.82x1.42x2.20 m Lredoz Iph Uepfx Akqju All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2014, Arburg 320C 500-170 e² / Hybrid Machine Year of manufacture: 2014 Ljdpfsz Iqzvsx Akqeru Injection Unit: Screw diameter: 30 mm Shot weight: 77 g Injection pressure: 2000 bar Dosing volume: 85 ccm Clamping Unit: Clamping force: 50 t Tie bar distance: 320x320 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Operating hours: 48,000 h in automatic mode Air valve x 2 Core pull control Controller with 8 hot runner zones Injection unit hardened - bimetallic Main motor of the machine: servo motor with inverter – energy-saving Proportional valve on the injection unit – for precise injection Dimensions: Weight: 2210 kg Length/Width/Height: 3.41x1.43x1.99 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: used, A Demag all-electric injection molding machine with Wittmann 3-axis robot and safety enclosure is offered. Clamping force: 1500kN, locking force: 1650kN, max. mold opening stroke: 495mm, min./max. mold height: 275mm/585mm, max. distance between mold platens: 1080mm, mold platens X/Y: 770mm/770mm, clear distance between tie bars X/Y: 520mm/520mm, max. mold weight: 1700kg, max. mold weight on the movable mold platen: 1150kg, ejector stroke: 125mm, ejector force: 35kN, ejector retraction force: 35kN, screw diameter: 35mm, L/D ratio: 20, max. injection pressure: 2430bar, stroke volume: 166cm³, shot weight: 146g, max. metering stroke: 173mm, max. nozzle stroke: 400mm, nozzle immersion depth: 20mm, nozzle contact force: 30kN, installed barrel heating capacity: 9.4kW, material hopper capacity: 35l, control: CDIAS, operating hours: approx. 76000h, machine weight: approx. 7400kg. Including WITTMANN 3-axis robot, year of manufacture: 2006, travel X/Y/Z: 550mm/1200mm/2000mm, robot weight: approx. 240kg as well as safety enclosure and 1x core pull preparation AS. Documentation available. An on-site inspection is possible. Lsdo Aa Alwjpfx Akqoru

Condition: good (used), Manufacturer: DEMAG Year of manufacture: 1995 Machine number: 878-0140 Operating hours: h Type: Ergotech 250-1450 system Control system: NC4 Lodj Aaz Tajpfx Akqoru Screw diameter: 60 mm Displacement: 763 cm³ Injection weight: 690 g Injection pressure: 1,905 bar Clamping unit: Clamping force: 250 t Holding force: 275 t Opening stroke: 675 mm Minimum/maximum tool mounting height: 330 / 710 mm Ejector stroke: 200 mm Ejector plate dimensions: 950 x 950 mm Tie bar spacing: 630 x 630 mm Plate distance: 1,385 mm Condition: good, ready for operation Equipment: 4 core pulls Handling: Robot System DR 322 Travel ranges x – y – z: 800 x 1,600 x 3,000 mm Heater connection: 27 kW Screw drive connection: 35 kW Weight: 13.5 t Dimensions: 6,400 x 1,900 x 2,300 mm

Condition: excellent (used), Year of construction: 2003, operating hours: 67,092 h, BATTENFELD HM 10000-9200 Manufacturer: BATTENFELD Model: HM 10000-9200 Control system: UNILOG B4 Year of manufacture: 2003 Operating hours: 67,092 h Technical data – Clamping unit Clamping force: 10,000 kN Tie bar spacing (h x v): 1120 x 1400 mm Platen size (h x v): 1960 x 1690 mm Minimum mold height: 550 mm Maximum mold height: 1,020 mm Maximum daylight: 2,120 mm Lredpsx Up Rhefx Akqou Opening stroke: 1,100 mm Ejector stroke: 300 mm Ejector force: 118 kN Movable platen centering diameter: 250 mm Fixed platen centering diameter: 315 mm Technical data – Injection unit Screw diameter: 120 mm Shot volume: 5,655 cm³ Injection pressure: 1,632 bar Screw length: 22 L/D Screw stroke: 500 mm Screw speed: 130 min⁻¹ Screw torque: 11,370 Nm Plasticizing rate: 144 g/s PS Free discharge plasticizing rate: 1,144 g/s PS Number of heating zones: 8 Nozzle stroke: 700 mm Dimensions & Weight Machine dimensions (L x W x H): 11.6 m x 2.9 m x 2.5 m Total weight: 76,500 kg Equipment Display language: German CompactFlash drive 4x hydraulic core pulls Leveling elements EUROMAP 12 interface Interface for temperature control unit Enlarged oil cooler 16x mold heating circuits

Condition: excellent (used), Year of construction: 2012, Sumitomo Demag Systec 350/720-2300 / Production Line with Wittmann-Demag DR833 Robot Lredpfx Asz Iplmskqou Year of manufacture: 2012 Injection Unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cm³ Clamping Unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping system: toggle lever Control system: NC5 Additional equipment: Euromap 67 Robot interface 5x air valves 1x hydraulically operated core pull with proportional valve 5x hot runner controls Hardened injection unit – bimetal Moog proportional valve on the injection unit – high-precision injection Parallel movements Central lubrication 3 variable-capacity hydraulic pumps Integrated printer Machine has been regularly serviced by authorized Sumitomo Demag technicians Robot Wittmann-Demag DR833 Year of manufacture: 2011 4-axis robot: 3 axes driven by servomotors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Axis travel: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Robot with adapter, conveyor belt, and protective enclosure Purchase of the robot and conveyor belt at additional cost Dimensions: Weight: 15,750 kg L x W x H: 8.26 x 2.01 x 2.27 m All offered machines are started up by our service technicians prior to sale. It is possible to obtain a video of technical tests for the selected machine, or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2009, operating hours: 35,808 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 204 cm³, injection pressure: 1,860 bar, injection weight: 186 g, Here, as a dealer of injection molding machines, we offer the following well-maintained, used injection molding machine: We also purchase well-maintained injection molding machines manufactured from 2010 onwards. We have been a wholesale supplier of injection molding machines for over 25 years. Manufacturer: KraussMaffei Type: KM EX 80-380 (fully electric) Serial Number: 61013142 Year of Manufacture: 2009 Operating Hours: 35,808 h Control System: MC 5 Fully functional Condition: very well maintained Machine comes from a German original owner xxxxx without robot / without temperature control unit xxxxx Extras: - Needle-gate nozzle, pneumatically operated - Pneumatic valve 1 on back wall adapter plate (BWAP) - Pneumatic control for 1 hot runner - Pneumatic control for hot runner/cold runner - Defect sorting chute - Nozzle protection door - mold opening protection door, hinged - Euromap interface 18 on front wall adapter plate (FWAP) - Ejector plate, electrically operated on BWAP - Hydraulic auxiliary unit for hydraulic core pulls - Injection molding circuit - 2 x hydraulic core pulls (on BWAP and FWAP) - Pressure relief for core pulls on BWAP and FWAP - Water manifold, 8-way - 8 x temperature control points for hot runner - Extrusion injection circuit with position point control - 3 x 230V sockets / 2 x CEE 16A / 1 x CEE 32A - Signal interface EUROMAP 67 for robot - Start-up circuit, QS package, cycle time analysis, cycle memory, event log - BluePOWER package – display of energy consumption - Graphics analysis package, trend graph - Interface for temperature control unit - Cycle time analysis, cycle setpoint optimization Main language: German Injection Unit Screw diameter: 40 mm Injection weight: 186 g/PS Injection pressure: 1860 bar Injection volume: 204 ccm Clamping Unit Clamping force: 80 tons / 800 kN Tie bar distance: 420 x 420 mm Platen dimensions: 655 x 670 mm Tool installation height: 250 mm Maximum distance between platens: 750 mm Ejector stroke / force: 100 mm / 22 kN Clamping unit: fully electric Warranty Warranty until first commissioning Ledpfeyrd U Uex Akqsru - Available immediately from our warehouse in Hanover, free loading onto the buyer's truck or free delivery to your location against reimbursement of freight costs throughout Europe. Worldwide delivery by container or box is also possible. Organization of customs clearance included. - The machine was tested before dismantling. - The machine is in our sole ownership. - The requested machine is available immediately in our warehouse in Hanover and will be offered after functional testing and can be inspected under power. For information about the machines we offer and our company: - We only sell our own machines that we have purchased from current production, from our warehouse in Hanover. - All offered machines are checked and tested before dismantling. - We do NOT sell insolvency goods. We are NOT a mediator who deals with third-party property. - All offered machines come from successful companies for which maintenance and care are a matter of course. - All offered machines can be inspected at our warehouse.

Condition: excellent (used), Year of construction: 2011, Cronoplast S.L. BabyPlast 6/10 Vp-T⌀12 / Production line with robot, rotary table and additional automation. Year of manufacture: 2011 Clamping unit: Clamping force: 6.25 t Clamping unit: hydraulic Control: BABYPLAST - touch screen Additional equipment: Production line with robot, rotary table and additional automation Vertical injection molding machine Air valves Injection for mold parting Automatic adjustment of the injection unit setting (up - down) The rotary table is driven by a servo motor controlled by an inverter - very precise Automatic part feeding with quality control system Machine workstation protection with safety package Dimensions: Weight: 350 kg Lodpfx Aez Iqfbekqoru Length/width/height: 0.70x1.00x1.65 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2012, Engel Victory 1350/300 Tech Ecodrive with Sepro Industrial Robot SDR 22S / Hybrid Machine / Operating Hours: approx. 18,000 hours in automatic operation Year of Construction: 2012 Injection Unit: Screw Diameter: 60 mm Shot Weight: approx. 670 g Injection Pressure: 1835 bar Dosing Volume: 735 ccm Clamping Unit: Clamping Force: 300 t Tie Bar Spacing: 0x0 mm Platen Size: 1200x1000 mm Ejector: hydraulic Clamping Unit: hydraulic Control System: CC 200 - Touchscreen Additional Equipment: Production line with Sepro Industrial Robot SDR 22S Machine in very good technical condition Operating Hours: approx. 18,000 hours in automatic operation Tie-barless, hybrid machine: energy-saving and very quiet Hydraulic core pull x 2 Ljdpfx Aksz Ipu Uoqjru Control system with hot runner system x 12 Injection unit is wear-resistant and corrosion-resistant Main motor of the machine - driven by a servomotor with inverter - energy saving Proportional valve on the injection unit – precise injection Option to purchase spacer plates (movable and fixed), water-cooled plates, screw hole diameter M20 Material supply system Motan (dosing and conveying unit) available at an extra charge Robot Sepro Industrial Robot SDR 22S Year of Construction: 2016 4-axis robot: 3 axes are driven by servomotors (electric); Axis C - pneumatic Travel distances in axes: X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Safety package for robot Robot with adapter, conveyor belt, and protective housing from Engel Purchase of the robot and conveyor belt available at an extra charge Dimensions: Weight: 19900 kg Length/Width/Height: 7.06x2.13x2.30 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2010, Arburg 470H 1000-400 e² / Hybrid Machine / Production Line with Arburg Multilift Select Robot Year of manufacture: 09.2010 Injection unit: Screw diameter: 40 mm Lsdpfjz Ipyqox Akqjru Shot weight: 184 g Injection pressure: 2000 bar Dosage volume: 201 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 470x470 mm Platen size: 637x637 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy efficient and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 1 Hot runner control x 12 Hardened injection unit - Bimetal Main motor of the machine - Servo motor with inverter drive - energy saving The injection unit is driven by a servo motor controlled by an inverter Machine equipped with cylinder/bottle with compressed nitrogen (additional load for fast operation) Central lubrication Integrated sorting flap Arburg Multilift Select robot 6kg transverse Year of manufacture: 09.2010 4-axis robot: 3 axes driven by servo motors (electric); C-axis - pneumatic Travel paths in axes: X-400, Y-600, Z-1800 Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 5180 kg Length/Width/Height: 4.40x1.56x2.02 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Arburg 1500T 3200-1300 e² / hybrid machine with one rotary table Year of manufacture: 2011 Injection unit: Screw diameter: 60 mm injection weight: 607 g Injection pressure: 2000 bar Metering volume: 664 ccm Clamping unit: clamping force: 320 t tie bar distance: 0x0 mm size of clamping platens: 1510 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 30.000 in automatic mode Euromap 67 Robot interface Control with air valve Hydraulic core pull x 3 Control with hot runners x 13 Injection unit hardened - bimetal Main machine motor - servo motor driven by inverter Very precise rotary table driven by servo motor controlled by inverter Rotary table diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment Self-closing nozzle Primus sensor - mold pressure control Lsdpjz Iqdqefx Akqjru It is possible to convert the injection unit so that it works vertically Dimensions: Weight: 16080 kg Length/width/height: 4.91x2.12x4.62 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2005, Arburg 470C 1500-150/150 / 2K machine / machine in very good technical condition Year of manufacture: 2005 injection unit: screw diameter: 25 mm injection weight: 49 g Injection pressure: 2500 bar Metering volume: 54 ccm Clamping unit : clamping force: 150 t tie bar distance: 470x470 mm size of clamping platens: 685x685 mm Ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: 2K machine Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection type of injection unit: Vario - this offers the possibility to use the injection unit e.g. for lateral spraying Parallel movements The vertical injection unit - screw diameter fi 25 mm (49 g/hp) It is possible to change screw diameters in both injection units for the screw diameters recommended by the manufacturer: 30, 35 mm Dimensions: Weight: 5700 kg Drive: Pumps/motor: 30 kW Heating power: 2 x 9,4 kW Ljdpfx Aksz Ip Eyjqsru Total power: 48,8 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, 1,0 ST. gebr. Spritzgiessmaschine mit Roboter Hersteller: NETSTAL Lrjdpfx Aoz Izqbskqeu Typ: SYNERGY2400-150 Baujahr: 2008 Schließkraft: 240 Tonnen Holmabstand: 630 x 630 mm Schneckendurchmesser: 70 mm Spritzteilgewicht: 916 g/PS Ausstattung: Kernzüge 3 x DS / 2 x AS Roboter SEPRO

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, number of injections: 2, Here we offer, as a dealer in injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesaler of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 520S 1600 290/70 – 2-component machine Year of manufacture: 2009, from first German owner - Total cycles: 12.3 million - Manual operation: 86,565 hours - Automatic operation: 78,099 hours Injection units (2K) Injection unit 1 – horizontal - 290 - Screw diameter: 25 mm - Shot volume: 71 cm³ Injection unit 2 – vertical - 70 - Screw diameter: 18 mm - Shot volume: 21 cm³ Clamping unit Mounting platens: 695 x 695 mm - Maximum platen distance: 925 mm - Opening stroke: 675 mm - Minimum mould height: 250 mm - Electric index rotation: present Extras Hot runner / additional axes - 12-zone hot runner integrated - 3x core pulls - 2x blow-out functions → incl. actuation for needle shut-off - Various customer-specific inputs and outputs Interfaces / Communication - ALS - Connection for temperature control units - Connection for dryers Handling / Multilift H (6 kg) - 2x vacuum circuits - 5x double-acting gripper functions - Z-axis servo-driven, 800 mm stroke Lsdpsyzumzjfx Akqeru - C, G, X, and B axes pneumatically actuated - Various customer-specific inputs and outputs → incl. gripper monitoring Complete maintenance log for the past 3 years - Both injection units re-sealed by Arburg - Clamping unit completely re-sealed by Arburg - Accumulator bottles replaced by Arburg in 2020 Warranty Warranty valid until initial commissioning Loading/shipping Free loading onto buyer’s truck or free delivery (CPT) for reimbursement of freight costs Worldwide delivery Available ex stock in Hannover, Germany Information about our offered machines and company: - We only sell machines that we have purchased from active production, available from our warehouse in Hannover - All offered machines are inspected and tested before dismantling - We do NOT sell insolvency goods; we are NOT intermediaries dealing with third-party assets - All machines offered originate from successful companies where regular maintenance and care are a matter of course - All offered machines can be inspected at our warehouse

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, 1,0 ST. gebr. Spritzgiessmaschine mit Roboter Hersteller: NETSTAL Typ: SYNERGY2400-900 Baujahr: 2004 Schließkraft: 240 Tonnen Holmabstand: 630 x 630 mm Lredpjz Iz Hcefx Akqeu Schneckendurchmesser: 50 mm Spritzteilgewicht: 377g/PS Ausstattung: Kernzüge 2 x DS / 1 x AS Roboter WITTMANN

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, 1,0 ST. gebr. Spritzgiessmaschine mit Roboter Hersteller: NETSTAL Typ: SYNERGY2400-900 Baujahr: 2004 Schließkraft: 240 Tonnen Holmabstand: 630 x 630 mm Ljdpfxoz I Agdo Akqeru Schneckendurchmesser: 50 mm Spritzteilgewicht: 377g/PS Ausstattung: Kernzüge 2 x DS / 1 x AS Roboter WITTMANN

Condition: excellent (used), Year of construction: 2012, Battenfeld EcoPower SE 300/1330 / Electric machine Year of manufacture: 2012 Injection unit: Screw diameter: 50 mm Injection weight: 491.4 g Injection pressure: 2470 bar Metering volume: 540 ccm Clamping unit: Clamping force: 300 t tie bar distance: 770x720 mm size of clamping platens: 1090x1170 mm ejector: electric clamping unit: toggle lever control: UNILOG B6 - touch screen Additional equipment: electric machine: high speed, energy saving and very quiet Machine in very good technical condition Euromap 67 Robot interface Air valve x 8 Control unit with hot runners x6 Injection unit hardened - bimetal Parallel movements It is possible to change the screw diameter for fi 45, 55, 65 mm Ledpfx Asz Ipgwokqsru Dimensions: Weight: 14100 kg Length/width/height: 7.20x2.04x2.20m Propulsion: Pumps/motor: 0 kW Heating power: 22 kW Total power: 0 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2012, Arburg 520H 1500-800 e² / Hybrid Machine / Production Line with Side Robot Arburg Multilift H Year of manufacture: 04.2012 Injection Unit: Screw diameter: 55 mm Shot weight: 434 g Injection pressure: 1650 bar Dosage volume: 474 ccm Clamping Unit: Clamping force: 150 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping unit: toggle lever Lrsdez Ip N Espfx Akqju Control system: SELOGICA - Touchscreen Additional Equipment: Hybrid machine: high-speed, energy-saving, and very quiet Control system with air valve Core pull control Hot runner control x 12 Injection unit hardened - bimetallic Main drive motor - servo motor with inverter - energy saving Injection unit driven by servomotor controlled by inverter Machine equipped with cylinder / battery with compressed nitrogen (additional charge for fast operation) Central lubrication Automatic mold height adjustment Kistler sensor - mold pressure regulation The injection molding machine was operated in a so-called "cleanroom," and is fitted with extra protective devices against contamination and two vapor absorbers Side robot Arburg Multilift H Year of manufacture: 2012 5-axis robot: Z-axis driven by servo motor (electric); X, Y, and B axes (rotation) pneumatically operated Robot safety package Robot with adapter, conveyor belt with electric height adjustment, safety enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 6,820 kg Length/Width/Height: 5.03x1.56x2.21 m All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2007, Demag Concept 100/420-200 Year of manufacture: 2007 Injection Unit: Screw diameter: 25 mm Injection pressure: 2752 bar Shot volume: 61.3 cm³ Shot weight (PS): 54 g Max. dosing stroke: 125 mm Clamping Unit: Clamping force: 1000 kN Max. opening stroke: 500 mm Min. mould installation height: 250 mm Max. distance between platen: 750 mm Platen size: 600 x 600 mm Clear tie bar spacing: 420 x 420 mm Max. mould weight: 700 kg Equipment: Lredpfx Asx Uqb Iekqju Core pull: 2x Mould heating: 6x Air valve: 1x Robot interface Machine is supplied with robot