Used Plastic Shredder for sale (6,749)

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Todpfx Ajykvdloqxea Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t

Condition: used, Year of construction: 2016, The shredder breaks down large, bulky pieces of Styrofoam, EPS, and similar materials with a maximum bulk density of 30 kg/m³ into small pieces. The shredder reduces the volume by approximately 65%. This makes the machine ideally suited for use in industrial and craft businesses as well as for wholesale and retail trade of packaging materials made of Styrofoam. Tjdpfxjzlh Tae Aqxja Depending on the screen set, simply shredding your Styrofoam waste achieves a volume reduction of 3:1. Custom-made solutions are available upon request. VAT is stated separately on the invoice. Shipping is included throughout Germany, with an extra charge for island deliveries. If you have any questions, please feel free to contact us.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 257.42 kW (349.99 HP), Mobile shredder LINDNER MIURA 1500. Todpfxou Di Azj Aqxoa Foldable discharge conveyor. Radio remote control.

Condition: excellent (used), Year of construction: 2013, rotor diameter: 370 mm, rotor length: 1,200 mm, type of input current: three-phase, year of last overhaul: 2026, input voltage: 400 V, WEIMA WL 12 – Single-shaft shredder for plastics For sale: a single-shaft shredder from WEIMA, model WL 12 (or a special version based on this model), designed for shredding plastics. The machine features a robust and durable construction, a hydraulic material feed system, and a drive with a Bonfiglioli gearbox. It is ideally suited for recycling plants, plastics processing companies, and manufacturing businesses. Technical data: Manufacturer: WEIMA Maschinenbau (Germany) Type: single-shaft shredder Working chamber: 1200 × 1200 mm Working length of the rotor: 1200 mm Rotor diameter: approximately 320–370 mm Hydraulic material feed system Bonfiglioli gearbox Rotor speed: approximately 90 rpm Motor power: 37 kW Tjdpfozqgmpjx Aqxea Power supply: 400 V Weight: approximately 3300 kg The machine is designed for shredding PP, PE, HDPE, LDPE, ABS, PS plastics, plastic crates, pipes, profiles, car bumpers, post-production waste, and injection molded parts. The output depends on the type of material and the screen used, and is approximately 500 to 1000 kg per hour. The machine is based on a proven WEIMA design, which is valued for its durability, reliability, and low operating costs. It is possible to inspect and test the machine on site. For any questions, please feel free to contact us by phone.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,566 h, functionality: fully functional, overall weight: 25,000 kg, rotor diameter: 600 mm, number of blades: 42, total length: 9,630 mm, total height: 3,990 mm, total width: 2,547 mm, rotor length: 3,000 mm, power: 360 kW (489.46 HP), number of cylinders: 6, number of rollers: 1, For sale is a Doppstadt Büffel DW3060. This machine is one of the virtually indestructible Doppstadt machines. It is in used but good and operational condition. Tjdpfezp H Tyjx Aqxea Can be demonstrated on-site while in operation. Can be transported on the road via axle with a suitable towing vehicle. An absolutely high-performance machine. Available immediately. Basic model DW 3060-C "Büffel" Central axle trailer chassis with 3 axles, 80 km/h road approval Braking system incl. ABS and lighting according to EC directive 50 mm EC tow hitch incl. attachment shoe Hydraulically adjustable support legs Splash guard (fenders inside and on the sides) Permissible total weight 25,000 kg Tires 385/65 R22.5 Additional hydraulic connections Hydraulic preparation for comb screen system and drive Fuel tank 2 x 300 liters Roller length 3,000 mm, diameter 600 mm Rear belt: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Longitudinal belt: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24-V electrical control Reversal of the roller by means of an electric motor when the engine is stopped Automatically reversible fan wheel Chassis with level adjustment Acoustic start-up warning Paint: 2-component paint RAL2011 orange Additional equipment: BioPower package - Engine power: 360 kW, with reinforced planetary gearbox - Multi-tooth roller, length: 3,000 mm, diameter: 600 mm - Roller teeth 174 Form C armored (42 pieces) - Comb screen system with fine strip screen - Transmission oil cooler Hydraulic drive Radio remote control NEODYM over-belt magnet for rear belt Frame for over-belt magnet Humidification system (prepared)

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 44,000 kg, rotor length: 2,800 mm, power: 315 kW (428.28 HP), rotational speed (max.): 87 rpm, - MERAK 2800-2 with 315 kW - Cutting system 116PR - PG190 screen (can be changed on customer request) - Feed chute - Dust suppression - Electrical central lubrication - Hydraulic safety guard - Overband magnetic separator Neodymium - HP Tsdpsugf Dwjfx Aqxea - Rubberized bolted floor plates on tracked chassis

Condition: new, Year of construction: 2025, Features: - Overband Neodymium Magnetic Separator - HP - Dust suppression - Conveyor belt speed control Todpfx Aqsw Elbdoxea - Self-propelled chassis for semi-trailer

Condition: excellent (used), Year of construction: 2018, Catalogue number 7974 TECHNICAL DATA - Infeed opening of widened hopper: 1500x1730mm - Discharge outlet for shredded wood: 200mm diameter - Rotor working width: 990mm - Main motor: 22kW - Pump motor: 0.75kW - Number of knives: 54 pcs - Knife dimensions: 40x40mm - Screen: 20mm - Hydraulic feed drawer - Electric auto-reverse - Dimensions (L/W/H): 2500x2200x2350mm - Weight: approx. 2000kg ADVANTAGES – German made - Pulse feed pusher - Halfway pusher - Fast/forward pusher – automatic feed drawer speed adjustment – Original DTR documentation + CE, year 2018 – Hydraulic feed drawer – Auger – screw conveyor for chip transport Tsdpfxozadxce Aqxja – Auto-reverse – Used chipper, in very good condition Net price: 115,900 PLN Net price: 27,600 EUR based on exchange rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7614 Technical data: - Inlet width: 550 mm - Inlet height: 220 mm - Shaft width: 630 mm - Knife length: 630 mm - Number of knives: 2 pcs - Sieve dimensions: 60x60 mm - 2 lower toothed feed shafts - Lower shaft motor approx. 1.5 kW - Upper toothed feed shaft - Upper shaft motor approx. 1.5 kW - Vibrating chute - Vibrating chute length: 4750 mm - Vibrating chute width: 450 mm - Main motor: 45 kW - Vibrating chute motor: 1.5 kW - Auto-reverse Tsdpfxjza Eipj Aqxea - Reverse mode - Overall machine dimensions L/W/H: 3200x1700x1400 mm - Overall machine dimensions L/W/H: 4750x800x1100 mm - Weight approx.: 4500 kg ADVANTAGES – Auto-reverse (adjustable) – Reverse mode – Used chipper, in very good condition Net price: 120,900 PLN Net price: 28,780 EUR (depending on the 4.2 EUR exchange rate) (Prices subject to change with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7687 TECHNICAL DATA - Inlet width: 540 mm Tjdeza Ei Nopfx Aqxsa - Inlet height: 300 mm - Shaft width: 630 mm - Shaft diameter: 700 mm - Knife length: 630 mm - Number of knives: 2 pcs - Screen size: 40x40 mm - Bottom driven serrated shaft - Lower shaft motor: 4 kW - Top driven serrated shaft - Upper shaft motor: 4 kW - Belt feeder - Feeder belt length: 4720 mm - Feeder belt width: 500 mm - Main motor: 75 kW - Autoreverse (adjustable) - Overall machine dimensions (L/W/H): 3100x2000x1830 mm - Overall feeder dimensions (L/W/H): 4800x780x980 mm - Weight: approx. 5000 kg ADVANTAGES – German-made – Autoreverse – Used chipper, in very good condition Net price: 120,900 PLN Net price: 28,780 EUR depending on exchange rate at 4.2 EUR (Prices may vary in case of significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 6943 TECHNICAL DATA - Inlet of the loading hopper: 1600x1500mm - Working width of the rotor: 1500mm - Main engine: 45kW - Pump engine: 5.5kW - Number of knives: 44 pcs - Knife dimensions: 50x50mm - Screen: 59mm - Pressing drawer - Auto-reverse - Dimensions (L/W/H): 3430x2800x2850mm Tsdpfx Asza Efqjqxea - Weight: approximately 9000kg ADVANTAGES - Made in France - New knives installed - Auto-reverse - Pressing drawer - Very good condition - Used shredder Net price: 129900 PLN Net price: 30929 EUR Net price calculated based on an exchange rate of 4.2 PLN/EUR (Prices may change in case of significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 6875 TECHNICAL SPECIFICATIONS - Infeed width: 720 mm - Infeed height: 160 mm - Maximum input material thickness: 160 mm - Shaft width: 720 mm - Shaft diameter: 600 mm - Knife length: 80 mm - Number of knives: 4×12 pcs - Screen size: 25 mm - Infeed pressure feed roller motor: 0.75 kW - Lower toothed feed roller motor: 1.8 kW - Upper toothed feed roller motor: 1.8 kW - Vibrating chute length: 4470 mm - Vibrating chute width: 710 mm - Vibrating chute motor: 2.2 kW - Main motor: 55 kW - Autoreverse (with adjustable control) - Extraction nozzle diameter: 260 mm - Vibrating chute dimensions (L/W/H): 4470/950/930 mm - Machine dimensions (L/W/H): 3100/1500/1170 mm - Total weight: approx. 5500 kg Tedpfx Aqoza D T Tjxsa – German manufacture – Very low hours – Original documentation – Used shredder, condition very good / excellent Net price: 139,900 PLN Net price: 33,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the event of significant exchange rate fluctuations, the price may be subject to change)

Condition: excellent (used), CATALOG NUMBER 7613 Technical specifications: Tsdpfxozadr No Aqxsa - Feed opening width: 650mm - Feed opening height: 300mm - Shaft width: 660mm - Knife length: 660mm - Number of knives: 2 pcs - Screen dimensions: 90x100mm - 2 lower toothed feed rollers - Lower roller motor: 3kW - 2 upper toothed feed rollers - Upper roller motor: 3kW - Belt feeder - Feeder belt length: 2700mm - Feeder belt width: 630mm - Main motor: 75kW - Autoreverse - Reverse gear - Overall dimensions (L/W/H): 5350x1300x1300mm - Weight: 4200kg FEATURES – Made in Italy – Autoreverse (adjustable) – Reverse gear – Used chipper, in very good condition Net price: 149,900 PLN Net price: 35,690 EUR (based on 4.2 PLN/EUR) (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number: 7649 TECHNICAL DATA Infeed width: 900mm Infeed height: 300mm Shaft width: 1030mm Shaft diameter: 700mm Knife length: 1030mm Number of knives: 3 pcs Screen dimensions: 70x70mm Bottom: 2 toothed feed rollers Bottom roller motor: 7.5kW Top: 2 toothed feed rollers Top roller motor: 7.5kW Todpjzcby Njfx Aqxja Belt conveyor Redler chain conveyor 5600mm + 10600mm 2.2kW Infeed belt width: 800mm Main motor: 90kW Reverse operation Total machine dimensions (L/W/H): 3300x3100x1700mm Shredder base dimensions: 3300x2080x1940mm Feeder / redler dimensions (L/W/H): 5600x900x1000mm + 10600x1050x1600mm Base dimensions for infeed belt: 5100x1300x2520mm Total weight approx.: 16000kg ADVANTAGES – German-made – Redler chain conveyor equipped with scrapers – Reverse operation – DTR technical documentation – Used shredder in very good condition Net price: 219,900 PLN Net price: EUR 52,350 (at EUR 4.2 exchange rate) (Prices may vary with significant fluctuations)

Condition: excellent (used), Year of construction: 2017, CATALOGUE NUMBER 8014 TECHNICAL DATA - inlet width 540mm - inlet height 260mm - roller width 560mm Tedpsza Tvdjfx Aqxja - roller diameter 590mm - number of knives on the roller 4 pcs - feed rollers, geared, top and bottom 2x4kW - screen 40x35mm - electric auto-reverse (adjustable) - reverse gear - vibrating feeder 2.2kW - vibrating feeder length 6000mm - vibrating feeder width 500mm - capacity approximately 12-16 m³/h (depending on the type of material being shredded and the screen opening) - main motor 75kW - automatic hydraulic lifting function for the upper feed roller - overall dimensions of the vibrating feeder 6000x950x1600mm - overall dimensions of the machine L/W/H 3400x1700x2000mm - total weight approximately 6000kg ADVANTAGES - vibrating feed table 6000mm - electric auto-reverse (adjustable) - reverse gear - manufactured by the Polish brand OSKA - electrical diagram, DTR documentation + CE - unpainted - used shredder, very good condition Net price: 179900 PLN Net price: 42834 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7026 TECHNICAL DATA - feed opening width: 740 mm - feed opening height: 300 mm - shaft width: 780 mm - shaft diameter: 1000 mm - knife length: 780 mm - number of knives: 2 pcs - screen dimensions: 55x55 mm Tjdpfx Aqezcbyvexsa - from below: 4 toothed feed rollers - lower roller motor: 5.5 kW - from above: 3 toothed feed rollers - upper roller motor: 5.5 kW - belt feeder - belt feeder length: 4300 mm - belt feeder width: 600 mm - belt feed drive motor: 2.2 kW - main motor: 90 kW - reverse gear - auto-reverse - overall machine dimensions (L/W/H): 4600x2350x1700 mm - overall feeder dimensions (L/W/H): 4550x980x970 mm - total weight: approx. 11,000 kg – German manufacture - auto-reverse (with adjustable setting) – used chipper, in very good condition Net price: 231,900 PLN Net price: 55,200 EUR Net price calculated at exchange rate 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, operating hours: 8 h, overall weight: 230 kg, machine/vehicle number: RR42ABH, SCHORR RR42ABH – Professional wood chipper for branches up to 100 mm in diameter ✅ New & in stock ✅ Shipping possible ✅ Self-feeding ✅ For tractors The SCHORR RR42ABH is a powerful drum wood chipper for professional use. It effortlessly processes branches and log sections up to 100 mm in diameter and impresses with its robust design, high pulling power, and easy operation. Using the 3-point linkage (Category 1 and 2), you can attach the RR42ABH to your tractor in just a few minutes. The height-adjustable support feet keep it securely in position during assembly and disassembly, and the matching PTO shaft is included. With a power requirement of 18 to 50 hp, it is also suitable for smaller tractors and compact tractors. The self-feeding cutting unit with 4 knives and 1 hardened steel counter-knife guarantees a clean chipping result and a consistent material flow. The large feed hopper allows for quick and safe material feeding, even with heavily branched wood. The discharge chute is 290° rotatable, so the chipped material can be deposited in a targeted manner – whether in piles, trailers, or big bags. Advantages ✓ Compact 3-point mounted chipper for tractors from 18 to 50 hp ✓ Chips branches and brushwood up to 100 mm in diameter ✓ Extended feed hopper also handles bulky crown wood ✓ Robust knife disc with 4 knives and counter-knife ✓ Rotatable discharge chute (290°) for targeted filling ✓ Height-adjustable support feet, quick 3-point mounting (Cat 1 & 2) ✓ PTO shaft included, ready for use in minutes ✓ Directly from the manufacturer, with spare parts stock & workshop service Tsdpfx Aqjzilb Aexea Technical data Manufacturer: SCHORR Model: RR42ABH Drive type: PTO, direct drive 3-point category: Cat 1 & 2 Max. branch diameter: 100 mm Chipping type: Drum, self-feeding Number of knives: 4 + 1 counter-knife Weight: 230 kg Overall length: 1070 mm Overall width: 830 mm Overall height: 1240 mm Discharge angle: 290° Recommended tractor power: 18-50 hp PTO speed: 540-1000 rpm The RR42ABH is designed for long-term use. All components are easily accessible, allowing maintenance work to be carried out quickly. Spare parts are available at any time from stock. Upon request, we offer technical service and repairs in our own workshop or directly at your location. Financing Leasing or installment payments are possible – please contact us.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, operating hours: 10 h, overall weight: 560 kg, machine/vehicle number: RR102ABH-S PRO, SCHORR RR102ABH-S PRO – Professional wood chipper for branches up to 255 mm in diameter ✅ New & in stock ✅ Shipping possible ✅ Self-feeding ✅ For tractors The SCHORR RR102ABH-S PRO is a powerful drum wood chipper for professional use. It effortlessly processes branches and log sections up to 254 mm in diameter and impresses with its robust design, high pulling power, and ease of operation. Two hydraulically driven rollers grip the wood and pull it evenly towards the blade disc, even with bulky, branched material. The feed is conveniently controlled via the control lever: forward, stop, and reverse. If a thick branch gets stuck, briefly reverse it using the reverse function, and the rollers will pull it back in cleanly. The self-feeding cutting unit with 4 knives and 1 hardened steel counter-knife guarantees a clean chipping pattern and a consistent material flow. The large feed opening allows for quick and safe material feeding, even with heavily branched wood. The discharge chute is 290° rotatable, so the chipped material can be deposited precisely – whether in piles, trailers, or big bags. Advantages ✓ Powerful PTO-powered chipper for tractors from 60 to 150 hp ✓ Chips branches and logs up to 254 mm in diameter ✓ Hydraulic roller feed with forward and reverse function via the control lever ✓ Independent hydraulic system, no connection to the tractor hydraulics required ✓ Heavy-duty blade disc with 4 knives and counter-knife ✓ Rotatable discharge chute (290°) for targeted filling ✓ 3-point linkage Cat 2 & 3, PTO shaft included ✓ Directly from the manufacturer, with spare parts storage & workshop service Technical data Manufacturer: SCHORR Model: RR102ABH-S PRO Design: 3-point linkage for tractor 3-point category: Cat 2 & 3 Drive: PTO, direct drive PTO speed: 540-1000 rpm Recommended tractor power: 60-150 hp Feed: Hydraulic roller feed, forward and reverse via control lever Hydraulic system: Independent (separate oil tank), no tractor connection required Hydraulic oil tank: 24 L Chipping capacity (max. branch diameter): 254 mm Flywheel diameter: 940 mm Flywheel weight: 200 kg Cutting knives: 4 Counter-knife: 1 Discharge rotation: 290° Safety: Emergency stop Weight: 750 kg Packaging dimensions (L×W×H): 2100 × 1500 × 1300 mm Tedpfx Aqjzilbcsxja The RR102ABH-S PRO is designed for long-term use. All components are easily accessible, so maintenance work can be carried out quickly. Spare parts are available at any time from stock. Upon request, we offer technical service and repairs in our own workshop or directly at your location. Financing Leasing or installment payments are possible – please feel free to contact us.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, operating hours: 15 h, SCHORR RR200THX – Professional Wood Chipper for Branches up to 200 mm ✅ New & In Stock ✅ Shipping Available ✅ Self-Feeding The SCHORR RR200THX is a powerful drum wood chipper designed for professional use. It easily processes branches and trunk sections up to 200 mm in diameter and impresses with its robust construction, high throughput, and user-friendly operation. Equipped with a 25 HP petrol engine, this chipper delivers ample power for daily tasks in gardening, landscaping, and forestry. The electric start (e-starter) ensures comfortable and reliable startup—even in cold temperatures. The self-feeding cutting system, featuring 2 blades and 1 counter-blade made of hardened steel, guarantees a clean chipping result and consistent material flow. The large feed opening allows for quick and safe material input, even with heavily branched wood. The discharge chute is rotatable 360°, allowing you to direct the wood chips precisely—into piles, trailers, or big bags. Advantages - Self-feeding: No manual pushing required - E-starter: Convenient push-button starting - Robust cutting system: Hardened steel blades for long service life Todpezilarefx Aqxja - Heavy-duty steel frame: Stable, torsion-resistant, and durable - 360° discharge chute: Flexible direction of chip output - Easy maintenance: Simple access to blades, filters, and oil - Mobile: Drawbar with parking brake for secure stationary placement and transport Technical Data Manufacturer: SCHORR Model: RR200THX Drive type: V-belt Max. branch thickness: 200 mm Chipping type: Drum, self-feeding Number of blades: 2 + 1 counter-blade Weight: 255 kg Overall length: 2819 mm Overall width: 1217 mm Overall height: 1550 mm Discharge chute angle: 360° Engine power: 19 kW / 25 HP Displacement: 764 cc Starting system: E-starter The RR200THX is built for long-term use. All components are easily accessible, allowing maintenance to be carried out quickly. Spare parts are available from stock at any time. Upon request, we offer technical service and repairs in our own workshop or directly at your site. Financing Leasing or installment payment available—please contact us for details.

Condition: used, functionality: fully functional, Year of construction: 2014, maximum speed: 80 km/h, overall weight: 1,800 kg, empty load weight: 1,800 kg, operation weight: 1,800 kg, mobility: mobile, machine/vehicle number: 3314051396, The machine runs perfectly. If you have any questions, feel free to call us. Price: €10,710 incl. VAT, €9,000 net (export) • Machine Manufacturer: Jensen Model: A425DI Type: engine-driven chipper / wood chipper Designation: SDAH work machine Serial number: 3314051396 Additional ID: 6412 0899 First registration: 16/06/2014 • Technical specifications Feed system: hydraulic feed with two rollers Maximum log diameter: approx. 200 to 220 millimeters Chipping system: disc chipper Discharge: rotating discharge chute • Engine Engine type: diesel Type: ATZ Power: 24.3 kW • Dimensions and weight Weight: approx. 1,800 kilograms Chassis: trailer Hitch: car trailer hitch • Features Hydraulic feed with forward and reverse Emergency stop system Safety bar at intake Adjustable discharge chute • Fields of application Professional use in Todpjy Amidjfx Aqxoa Arboriculture Gardening and landscaping Municipal work Shredding wood and branches

Condition: excellent (used), CATALOGUE NUMBER 8041 TECHNICAL DATA - shaft width 240mm - shaft diameter 260mm - inlet width 250mm - inlet height 120mm - number of knives 9 pcs - automatic reversing with adjustment capability - screen dimensions 30mm - toothed drive shaft (bottom) 0.75kW - toothed drive shaft (top) 0.75kW - with conveyor belt 2060x260mm - feeder motor with conveyor belt 0.55kW - main motor 15kW - feeder dimensions (length/width/height) 2270x700x600mm - machine dimensions (length/width/height) 1550x850x700mm - weight 800kg ADVANTAGES - German production - automatic reversing with adjustment capability - with conveyor belt - very good condition - used shredder Tedpfxozkvhis Aqxea Net price: 29900 PLN Net price: 7119 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8040 TECHNICAL DATA - dimensions of the loading hopper (top, length/width): 850x1180mm - rotor width: 350mm - engine: 22kW - screen size: 12mm - number of knives: 6 pcs - dimensions (length/width/height): 1260x1200x1890mm Tjdpezkvhcofx Aqxea - weight: 980kg ADVANTAGES – German-made – very good condition – used shredder Net price: 25900 PLN Net price: 6167 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to fluctuations in the exchange rate)

Condition: excellent (used), CATALOGUE NUMBER 8039 TECHNICAL DATA - inlet width 320mm - inlet height 160mm - roller width 320mm - blade length 310mm - number of blades 2 pcs - toothed drive roller, top - toothed drive roller, bottom - vibratory feeder with magnet 1650x310mm - automatic reversing - main motor 22kW - feed motor 2×1.1kW - machine dimensions with vibratory feeder (length/width/height) 2600x1500x1800mm - machine and vibratory feeder weight approximately 1500kg ADVANTAGES – Austrian made – vibratory feeder with magnet 1650mm – automatic reversing – original DTR documentation – used shredder, very good condition Net price: 34900 PLN Net price: 8310 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations) Tjdpfozkvglox Aqxsa

Condition: excellent (used), CATALOGUE NUMBER 8038 TECHNICAL DATA - Inlet of the loading hopper: 800x600mm - Outlet for shredded wood: diameter 160mm - Working width of the rotor: 600mm Tedpfx Aozkvb Asqxoa - Main engine: 15kW - Pump engine: 0.75kW - Tank capacity: 0.4m3 - Number of blades: 14 pcs - Blade dimensions: 30x30mm - Screen: 15/10mm - Presser drawer - Electric auto-reverse - Dimensions (length/width/height): 1800x1120x1760mm - Weight: 930kg ADVANTAGES - German production - Presser drawer - Auto-reverse - Used wood chipper, very good condition Net price: 31900 PLN Net price: 7595 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, Year of construction: 2013, operating hours: 3,500 h, machine/vehicle number: 13620, rotor diameter: 395 mm, rotor width: 1,300 mm, input voltage: 400 V, number of blades: 60, rotational speed (max.): 129 rpm, power: 55 kW (74.78 HP), The Vecoplan All-Shredder – VAZ – can be used for a variety of materials – waste shredding, plastic shredding, wood shredding, etc. The machine, with a power of 55 kW, is equipped with 60 cutting knives, each measuring 60x60 mm. A turbo clutch facilitates the start-up process, allowing the machine to be started even with a full hopper. The hopper is made of stainless steel, and the extraction hood is made of galvanized sheet metal. The machine is offered complete with the control panel. The hopper and extraction hood are included. Tjdezmzduopfx Aqxsa If required, the infeed conveyor – pit conveyor with a width of 1000 mm – can also be purchased for an additional EUR 9,500. If required, the discharge conveyor, 650 mm wide, with a bend and magnetic head pulley – discharge height of 3800 mm – can also be purchased for an additional EUR 11,000. Spare parts are included in the price of the shredder. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner’s expense and can be delivered EXW at a port or in the production facility in Europe. The details for optimal transport need to be arranged. The machine price is without packaging on a pallet.