Used Plum Stoner for sale (222)

Year of construction: 2018, condition: good (used), x-travel 200 mm y-travel 60 mm z-travel 500 mm speed of measurment 0,02 - 20 mm/s 0 X = 0,05 µm 0 Z = 1 µm mg traversing speed X = 0 - 80 mm/s base plate 600 x 450 mm weight of the machine ca. 164 kg dimensions of the machine ca. 766 x 482 x 1166 mm Contracer contour measuring device, high-performance measuring system for Fpedpfovtgqdox Ah Usp automatic series measurement with motorized Z-column on granite plate. Straightness guidance of the X-axis via ceramic and automatic raising and lowering of the probe tip. Measuring range Z1 - axis = 60 mm. Table, screen and PC. The software can measure, evaluate and document. Machine dealer with own stock of 1600 m².

Condition: new, sheet width 1050 mm plate thickness 1.0 mm daylight opening 95.0 mm angle adjustable from - to 0 - 150 Grad total power requirement manuell weight of the machine ca. 180 kg range L-W-H 1320 x 790 x 1050 mm characteristics - Universally applicable bending machines for plumbing and repair shops - Simple pivoting movement of the bending beam using a bow handle - Easy adjustment of the upper beam for efficient work - High upper beam for producing high-edged profiles - The piano inserts in the upper, lower and bending beam result in a large number of bending options - Cassettes and special profiles with opposite bends are with these Models easily feasible Fjdpsxcuxwefx Ah Uspp Scope of delivery : - Segmented upper, lower and bending beam - bending segments 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 2 x 250 mm

Condition: used, mileage: 44,000 km, power: 130 kW (176.75 HP), fuel type: diesel, gearing type: mechanical, overall weight: 7,490 kg, first registration: 08/2008, next inspection (TÜV): 04/2026, loading space length: 6,070 mm, loading space width: 2,480 mm, loading space height: 2,350 mm, emission class: euro5, color: white, number of seats: 3, Year of construction: 2008, total length: 7,900 mm, total width: 2,550 mm, total height: 3,500 mm, Equipment: ABS, soot filter, tail-lift, 2nd owner since 2010. Original mileage only 44,600 km. MOT (TÜV): valid until April 2026 (a new inspection can be arranged at any time upon request. There are no deficiencies on the vehicle). Liftgate UVV inspection: valid until April 2026. Service: due April 2025. Batteries: new as of April 2025. Fjdpfjwd Aufox Ah Ujpp Registered as 'Other motor vehicle breakdown assistance.' In practice, this Atego is a standard box truck with side door and tail lift. Box body by SAXAS Nutzfahrzeuge Werdau AG, type MKD 61-M. Pallet width. Loading dimensions measured: 6.07 m length / 2.48 m width / 2.35 m height. Tail lift: BÄR Cargolift BC 1000 S2. Additional right-hand side door (hinged) with sliding entry step. Payload: 2,110 kg. Ringfeder trailer coupling with air connections, approved for trailer load = 11,235 kg. Front leaf suspension, rear air suspension with lifting and lowering function. Technically, this Atego is a true 8-ton truck. Currently registered with downgraded gross weight to 7,490 kg and recently deregistered in that configuration. Wheelbase: 4,220 mm. Euro 5 BLUETEC 5 engine. 6-speed manual transmission. ABS and ASR. Electric windows and mirrors. 3 seats. GRAMMER comfort driver's seat with seat heating. CD radio. Digital tachograph (Stoneridge). Analog indicator for vehicle battery charge status. This vehicle was kept internally for many years as an on-call emergency response unit. The Atego has been moved and serviced regularly, but was rarely actually needed. This explains its extremely low mileage. Overall condition is very good for its year. In fact, this unit is virtually unused. The vehicle has seldom, if ever, been subjected to heavy loads. Tyres all with 80-90% remaining tread. This truck is also a perfect base for conversion as a logistics support vehicle (Gerätewagen Logistik, GW-L) for fire brigades, aid organizations, or other authorities. Tachograph inspection valid until 12/2025. The Atego was transferred 600 km on the motorway without any issues. It drives excellently. This offer is only valid for businesses or government entities. Subject to prior sale and errors. Net price: €22,500!

Condition: ready for operation (used), To remove pulp from kernels. With take away conveyor and pump. All stainless steel construction. Good for plum, peach, appricot, cherry Fpjdpfx Aowxngcjh Usp

Year of construction: 2020, condition: new, Stainless steel design auger type infeed hopper For de-stoning of cherries, plums, sour cherries, apricots, peaches,... For different sieves Sieve with perforation Ø 5 mm is in the machine Fedpfx Ajcl Tu Ijh Uspp Electrical power supply: 400V 50 Hz 3 Phases / 11 kW Capacity: 2500 kg/h (depending on fruits and ripeness) Stepless rotor speed regulation

Condition: refurbished (used), Year of construction: 2019, operating hours: 11,487 h, load capacity: 2,950 kg, lifting height: 7,500 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 3,287 mm, fork length: 1,200 mm, empty load weight: 4,252 kg, Equipment: cabin, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONAL USE Our forklifts are technically overhauled according to FEM-4.004 and the latest safety standards—ensuring maximum quality and your safety. From chassis to battery, including drive, brakes, steering, and electrics—every vehicle is thoroughly inspected and reconditioned. ✔ Made in Germany – with responsibility and precision ✔ Rigorous technical inspection ✔ 400+ vehicles available ✔ Worldwide shipping & customs handling ✔ Service & spare parts at fair prices ✔ Personal support – even after purchase Test and get expert advice onsite now – we’ll find the right solution for you. Industrial Truck Data: Fpodpfew Izdxex Ah Uep Manufacturer: Jungheinrich Model: Counterbalance Forklift EFG S30 Drive type: Electric Load capacity: 2,950 kg Year of manufacture: 2019 Operating hours: 11,487 Lift height: 7,500 mm Mast type: Triplex Free lift: Yes Overall height: 3,287 mm Fork length: 1,200 mm Unladen weight: 4,252 kg Load center: 600 mm Tires: Solid rubber Model type: EFG S30 Battery type: PzS Battery weight: 1,863 kg Cab type: Full cab – front, roof & rear windows + steel doors (suspended) Cab equipment: Solopilot control element Lighting: All-round warning light Lighting: BlueSpot rear safety light Attachment: Sideshift Attachment: Additional hydraulic circuit – plumbed to the fork carrier

Condition: ready for operation (used), Year of construction: 2012, x-travel 408 mm y-travel 305 mm z-travel 256 mm turning speeds 10.000 U/min Fpodpfoxddrvex Ah Ujp table-size 914 x 305 mm spindle taper ISO 40 Number of working hours 22020 h distance spindle nose and table 102-457 mm rapid travel x/y/z 30,5 m/min tool changer 10-fach workpiece weight 227 kg control Haas CNC total power requirement 11,2 kW weight of the machine ca. 1,82 t dimensions of the machine ca. 2,54 x 2,12 x 2,54 m Well-maintained 3-axis machining center, with 22020 operating hours and 90% milled aluminum. Machine dealer with own stock of 1600 m².

Condition: new, sheet width 2065 mm plate thickness 1,20 mm daylight opening mit WZ 35,0 mm daylight opening ohne WZ 60,0 mm bending angle max. 0 - 135 ° total power requirement manuell weight of the machine ca. 520 kg. dimensions of the machine ca. 2400 x 1115 x 1150 mm - Segmented upper beam for a large number of bending options Fpodpfx Asxabvwjh Ujp - Universally applicable bending machine for plumbing and repair shops - High upper beam for the production of high-edged profiles - Quick and easy bending process using a bow handle - Easy adjustment of the upper beam for efficient work - The bending angle is set using a scale - Individually removable segments for bending boxes - Robust construction in a modern design Furnishing : - segmented upper beam + bending beam - Foot clamp - Fixed stop for angle adjustment - back gauge - bending segments 38 | 38 | 38 | 50 | 50 | 50 | 50 | 76 | 76 | 101 | 127 | 152 | 203 | 254 | 254 | 254 | 254 mm

Condition: new, Year of construction: 2024, GG06LX The only backhoe loader with these dimensions on the market. The machine is characterized by a high-efficiency engine, the new professional backhoe loader: GG06 LX from the international brand Günter Grossmann. Fpodpfep Aru Rox Ah Ujp Like all Gunter Grossmann machines, the machine has a company warranty so you can work worry-free. The GG06 LX model is a great machine for construction, electrical and plumbing companies. Backhoe loaders are manufactured based on advanced technology that has been used in our company for many years. We have all spare parts for machines of our brand in stock in Europe Price 16500 EUR (excl. VAT) Backhoe loader equipped with 2 buckets SPECIFICATIONS Brand: Gunter Grossmann Model: GG06LX Gross weight: 2280 kg Engine: Kubota D1105 Fuel type: diesel Number of cylinders: 3 Rated speed: 3000 (r/min) Rated power: 18.4 (kw) Displacement: 1,123 (L) Cooler: yes Engine oil quantity: 4L Excavator hydraulic pump: Parker USA Hydraulic pump loader: PWG Italia Hydraulic oil loader capacity: 84 L Excavator hydraulic oil quantity: 42L Hydraulic tank capacity: 22 (L) Hydraulic tank capacity: 22 (L) DIMENSIONS Length: 4900cm Width: 1150 cm Height: 2350cm Wheel specifications : 26×12.00-12 26×12.00-12 Loading box width: 1150 mm min. clearance: 155 mm driving speed: 12 (km/h) min. turning circle: 2400 (mm) WORKING RANGE Body capacity: 0.6 (m3) Load capacity: 600kg Loading height charger: 2000 (mm) loader digging depth: 240 (mm) Loader bucket lifting time at full load: 8 (s) Bucket lowering time: 4 (s) Nominal bucket capacity: 0.08 (m3) Excavator maximum digging height: 3200 (mm) Excavator unloading height: 1990 (mm) Excavator Max. Digging depth: 2490 (mm) Excavator tilt angle (left/right°) 52/59 Excavator rated pressure: 20 (MPa)

Condition: reconditioned (used), functionality: fully functional, Cherry and plum pitting machine Model: MPB for easy pitting Processing capacity approx. 35-190kg/h depending on fruit and size Tabletop device with hand wheel with circuit breaker DGUV V3 tested Connection 400V, 500Watt, 16A-CEE plug Dimensions: 465 x 410 x 480 mm, WxDxH Used machine cleaned and checked with 6 months warranty Option: cherry plate cherry stoner Fpsdpoidui Usfx Ah Usp Visit our big bakery machines exhibition

Year of construction: 2025, condition: new, SPECIAL OFFER! Washing system with granulator + destoning system IWR2000 Washing system with granulator for fruit and vegetables. The system is made entirely of stainless steel and features a sorting grate, a washing tank, and a conveyor belt. The fruit falls into the water and, after pre-washing, is transported along the conveyor belt, where it is thoroughly cleaned with fresh water. The cleaned fruit is then transferred to the mill, where it can pass through the desired sieve to reach the desired mashing unit. • Easy to clean • Minimal maintenance • The belt speed is continuously adjustable in both directions • With 2 steerable rollers • With 2 fixed rollers Technical information Rated capacity: 2000 kg/h Power requirement: 3 kW, 400 V, 10 A Mash discharge height: 1400 mm Wash tank connection: G 6/4" Cleaning connection: G ½" Material: Wnr. 1.4301, AISI 304 stainless steel Fpedjwcl Uljpfx Ah Usp Water consumption: approx. 12 L/min. Dimensions: Length: 2700 mm Width: 840 mm Height: 2270 mm Weight: 150 kg IPE4MAX The destoning and straining system is suitable for processing fruit and vegetables. It is equipped with interchangeable sieves and an adjustable rotating rotor for straining or pitting stone fruit, pome fruit, and various types of fruit and berries. The pulp and seeds are ejected separately. The sieves can be replaced quickly and easily. The system is supplied with one sieve; additional sieves can be ordered separately. • Food-safe rubber scraper • Adjustable distance between sieve and scraper • Rolling machine feet/swivel casters with brakes Technical information • Rated capacity: up to 4000 kg per hour • Power requirement: 4 kW, 400 V, 16 A • Material: Wnr. 1.4301, AISI 304 stainless steel Sieve sizes: • 0.8 mm: Berries, puree • 1.5 mm: Berries, puree • 3 mm: Apple, pear puree • 5 mm: Cherry • 8 mm: Plum, apricot • 10 mm: Peach, mango Dimensions: Length: 1130 mm Width: 574 mm Height: 1138 mm Weight: 125 kg

Condition: used, Year of construction: 2012, x-travel 762 mm y-travel 508 mm z-travel 508 mm Control Haas CNC Max. rpm 12.000 min/-1 power capacity - main spindel 22,4 kW max. Torque 102 Nm tool taper ISO 40 table surface area 914 x 457 mm T-slots 16 mm max. table load 1362 kg number of toolpositions 24 pos. tool taper SK 40 Fpsdpfjxddrpsx Ah Ujp max. tool diameter 76 (152) mm max. tool weight 5,4 kg change-time tool to tool 2,8 sec change-time chip to chip 3,6 sec rapid traverse ( X / Y / Z ) 18,0 m/min Number of working hours 14375 h spindle drive 22,4 kW weight of the machine ca. 3,42 t dimensions of the machine ca. 3,2 x 2,5 x 2,8 m Well-maintained 5-axis machining center, 3-axis machine + 2-axis dividing head. Machine with low operating hours (14,375). Lehmann dividing head, model ix-Y3, weight 80 kg. Machine dealer with own stock of 1600 m².

Condition: new, sheet width 1020 mm plate thickness 2,5 mm Fedsxaaxkjpfx Ah Uepp daylight opening 48 mm bending angle max. 0 - 135 ° total power requirement von Hand kW weight of the machine ca. 285 kg dimensions of the machine ca. 1,35 x 0,82 x 1,14 m Furnishing: - Universally applicable bending machine for plumbing and repair shops - Robust construction in a modern design - Easy adjustment of the upper beam using a foot pedal - Hands are free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending options - Optimal price-performance ratio - Quick and easy bending process using a bow handle - Non-slip rubber coating on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for producing high-edged profiles scope of delivery - Segmented upper cheek - manual backgauge - bending segments 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 270 mm

Condition: used, Year of construction: 1998, x-travel 1700 mm y-travel 400 mm z-travel 400 mm table surface area 2x 1100 x 420 mm table load 500 Kg tool taper SK 40 Fpodpfx Ahjxddq Ss Uep control Sinumerik 810 D Siemens turning speed range - spindle 30 - 6000 U/min tool piece magazine with 20 Plätzen Working speed 1 - 30000 mm/min rapid traverse x / y / z axis 30 / 30 / 30 m/min total power requirement 20 kW weight of the machine ca. 5 t dimensions of the machine ca. 3,8 x 2,8 x 3,1 m

Condition: new, sheet width 1020 mm plate thickness 2,0 mm daylight opening 48 mm bending angle max. 0 - 135 ° work height max. 900 mm total power requirement von Hand kW weight of the machine ca. 285 kg dimensions of the machine ca. 1350 x 820 x 1140 mm Furnishing: - Segmented upper and bending beam for a wide variety of bending options Fedpfx Aoxaaufeh Ujpp - Clamping by means of a foot pedal - Hands remain free for optimal positioning of the sheet - Universally applicable bending machine for plumbing and repair shops - Robust construction in a modern design - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending options - Optimal price-performance ratio - Quick and easy bending process using a bow handle - Non-slip rubber coating on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for producing high-edged profiles Scope of delivery : - Segmented upper cheek - Segmented lower cheek - manual backgauge - bending segments 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 270 mm

Condition: ready for operation (used), Year of construction: 2001, grinding length 800 mm grinding width 500 mm workpiece height 475 mm table-size 800 x 450 mm longitudinal feed 900 mm hydr. feed stepless 30 m/min cross feed autom. 1-30 mm Fsdpfoxddr Asx Ah Uspp vertical feeds: 1-99 My rapid traverse vertical 0,3 mm/min dimensions of grinding wheel 350 x 50 x 125 mm grinding spindle drive 7,5 kW total power requirement 9,37 kW weight of the machine ca. 2,9 t dimensions of the machine ca. 4 x 2,7 x 2 m Hydraulic surface grinding machine with AC control for automatic surface and plunge grinding with automatic intermediate dressing and dressing compensation, including various infeed rates in the roughing and finishing cycles. Hydraulic longitudinal table movement, servo-controlled transverse movement, hardened ball screw of the highest precision, automatic lubrication of the longitudinaland transverse movement. Automatic vertical infeed via stepper motor with digital display. Dressing device for manual or automatic straight dressing of the grinding wheel. Electro-permanent magnetic chuck with automatic demagnetization and holding force control. Automatic spark-out, rapid traverse vertical adjustment. Machine dealer with own stock of 1600 m².

Condition: new, sheet width 2065 mm plate thickness 1,20 mm daylight opening 30,0 mm bending angle max. 0 - 135 ° total power requirement manuell weight of the machine ca. 500 kg. dimensions of the machine ca. 2400 x 1115 x 1150 mm - Universally applicable bending machine for plumbing and repair shops - Robust construction in a modern design - easy adjustment of the upper beam by means of a foot pedal, Hands are free for the workpiece - manual bending machine for standard bending tasks - segmented upper beam for a large number of bending options - An auxiliary cylinder supports the bending process when folding - faster and easier bending process using a bow handle - easy adjustment of the lower beam to the respective sheet thickness - high upper beam for the production of high-edged profiles Furnishing : - Segmented upper cheek - back gauge Fjdpfx Ahsxaat Ie Uspp - bending segments 38 | 38 | 38 | 50 | 50 | 50 | 50 | 76 | 76 | 101 | 127 | 152 | 203 | 254 | 254 | 254 | 254 mm

Condition: good (used), Year of construction: 2013, grinding diameter 320 mm grinding length 1500 mm centre height 180 mm workpiece weight max. 150 kg grinding wheel size 400 x 50 x 203 mm grinding wheel speeds 1670 U/min grinding head - swivable +/- 30 ° adjustment grinding slide 246 mm workpiece spindle stepless 25-220 U/min grinding wheel adjustment manuell 0,01 / 0,0025 Fjdowyd S Depfx Ah Ujpp taper in spindle headstock MK 4 taper in spindle tailstock MK 4 Number of working hours ca. 20 h total power requirement 5,5 kW weight of the machine ca. 4,3 t dimensions of the machine ca. 4,3 x 2 x 2 m Hydraulic universal cylindrical grinding machine with a machining length of 1500 mm and a grinding diameter of 320 mm, with internal grinding attachment. Rotatable workpiece spindle head and swiveling table, hydraulic longitudinal table movement, hydraulic rapid traverse of the grinding head, hydraulic grinding head feed when reversing the table, manual + hydraulic adjustment of the tailstock quill. For further details, see data sheets, pics 9 and 10. Commissioning 2015: The machine was only used for a FEW HOURS on special workpieces, and then the orders dried up!

Condition: new, sheet width 2020 mm plate thickness 2,0 mm daylight opening 122 mit Segmente mm bending angle max. 0 - 135 ° work height max. 930 mm total power requirement von Hand kW weight of the machine ca. 1020 kg dimensions of the machine ca. 2,75 x 0,56 x 1,26 m Fjdpfxjxaamhs Ah Uspp characteristics - Segmented upper beam for a large number of bending options - Universally applicable bending machine for plumbing and repair shops - High upper beam for producing high-edged profiles - Quick and easy bending process using a bow handle - Easy adjustment of the upper beam for efficient work - The bending angle is set using a scale - Individually removable segments for bending boxes - Large opening width for processing large workpieces - Robust construction in a modern design scope of delivery - Segmented upper cheek - Biegesegm. 25 | 30 | 35 | 40 | 50 | 75 | 100 | 150 | 200 | 300 | 500 | 510 mm

Condition: used, current intensivity 140 A plate thickness 1,5 mm welding range CO2: 35 - 225 A Fpodpfoxbtmdex Ah Uep welding range 30Ar+CO2: 30 - 250 A weight of the machine ca. ca. 90 Kg dimensions of the machine ca. 0,4 x 0,8 x 0,8 m

Condition: good (used), Year of construction: 1999, sheet width 2040 mm plate thickness 3 mm daylight upper clamping 350 mm bending angle max. 0-135 ° adjustment of lower and bend clamping 80 mm control Fastimatic M200 power requirement 2,2/1,5 kW weight of the machine ca. 2460 kg dimensions of the machine ca. 3,2 x 2,8 x 2,1 m Motorized machine with motorized bending beam adjustment for setting the sheet thickness, screen control Fastimatic M200 (DELEM FM 200 B) for controlling the top cheek stroke, the bending angle and the back gauge with max. 30 working Fpjdpfxsvgnm Ho Ah Usp steps, emergency stop switch with magnetic holder, back gauge with ball screw spindles, CE mark. The bending performance refers to sheets of strength of 400 N / mm². Inox less due to its greater strength. Little used machine, very good condition - original colour! Please notice that the price of a new CNC-machine in this dimension with back gauge is about 65000,--. Machine dealer with own stock of 1600 m².

Condition: used, thickness of jaw 160 mm max. clamping width 310 mm ca. tension force ca. 5 to Fpedpfxsmi U Itj Ah Usp high of jaw 50 mm Dimensions (L/W/H) 750 x 160 x 200 mm weight ca. 60 kg High pressure vice with turning plate. Machine dealer with own stock of 1600 m².

Condition: used, thickness of jaw 125 mm max. clamping width 200 mm ca. Fsdstq I Nwjpfx Ah Uepp tension force ca. 3 to high of jaw 40 mm Dimensions (L/W/H) 500 x 130 x 200 mm weight ca. 30 kg High pressure vice with turning plate. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1979, x-travel 300 mm y-travel 160 mm z-travel 340 mm spindle taper ISO 40 spindle turning speed range 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1200 mm/min creep feed 4 mm/min control Heidenhain TNC 113 total power requirement 1,6/2 kW weight of the machine ca. 570 kg dimensions of the machine ca. 1,2 x 1 x 1,75 m with active digital display "Heidenhain TNC 113", for automatic retraction of preselected slide positions in absolute and incremental travel, autom. feeds stepless in x + z axis, sliding upper arm 100 mm. Fodpfoviyf Hox Ah Uopp We ask private interested parties to refrain from making an inquiry, as this is a well-maintained professional machine and usually exceeds the budget of hobby mechanics, including VAT. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1998, thread dia. 72 mm threading length 200 mm bolt thread from 6 - 72 mm bolt thread from 1/16 - 2 3/4 " inch thread 1/4 - 2 3/4 - 1/16 -2 1/2 " cutting head turning speed 35 + 70 U/min tube thread 16-63 mm tube thread 1/16 - 2 1/2 " total power requirement 2000/2300 Watt weight of the machine ca. 227 kg Fpsdsv Irh Rspfx Ah Ujp dimensions of the machine ca. 1,2 x 0,6 x 1,2 m The "REMS Unimat 75" thread cutting machine is a semi-automatic high-performance machine for the efficient cutting of bolt and pipe threads. Working principle: stationary material - rotating head, manual, self-centering vice, pole-changing motor, automatic lubrication cooling, drive via robust planetary gear, right + left running, thread cutting head for chaser cutting jaws. According to the previous owner, the chaser cutting jaws can be regrinded. Enclosed is a 2 x 1 m floor tray which is placed under the machine with 2 grids. The year of construction is estimated. The machine was overhauled by Rems in around 2015 and was hardly used after that because the external threads were produced on other machines. Since then the machine has been in storage and has now been sold. Please note: New price today € 26,000.00. Machine dealer with own stock of 1600 m².