Used Pot Tape Drilling Machine for sale (64,129)

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. Itjdoq Ii Dlepfx Ab Tjc - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: ready for operation (used), GILLARDON GB 20 – Column Drilling Machine from University - Infinitely variable speed control - Equipped with MK 3 adapter - Maximum drilling capacity in steel: 30 mm - Throat: 285 mm - Quill travel: 150 mm - Table clamping surface: 400x400 mm Iodpfjyk Dl Rjx Ab Tjtc - Table height adjustment approx. 650 mm - Adjustable drill depth stop - Speed display - Emergency stop - Work lamp - Foot switch - Documentation Dimensions (LxWxH): 0.7x0.6x1.8 meters / Weight: 650 kg Subject to errors and input mistakes

Condition: good (used), MAS VR8A Arm 2500 mm MC 6 Itedpfx Abexx Daps Tsc 10,000 kg

Condition: used, machine/vehicle number: 19170, 4-Spindle Paper Drilling Machine Ideal 504 Online-Video-Inspection by Skype-Video Itodsh Axygepfx Ab Tsc We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2001, machine/vehicle number: 700643, 2-Spindel-Papierbohrmaschine - 2-head spindle paper drilling Nagel Citiborma 280BBaujahr / Year 2001 - Serial-No. 01052175 Standgerät / standing device Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Itsdpfxeh Axx Hs Ab Tjc On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Bohrunterlage mit Bohrbandmechanik inklusive eines Bohrbands / Drilling pad with drill band mechanism including a drill band Papierbohrmaschine / Paper Drilling machine Dürselen Corta PB 04 N  Baujahr / Year 2013 - Serial-No. PB04.01.03.1629 4 Bohrköpfe / 4 Drilling Heads Stapelhöhe / Stack high max. 50mm Einlegetiefe hinter den Bohrern / Depth behind the Drilling heads 42mm Itjdpfx Aboxn S Ito Toc Lochabstand / Hole distance 31,7 - 293mm Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, sehr schöne Tischbohrmaschine von IXION BST 13 very nice Drilling machine IXION BST 13 Tischbohrmaschine / Drilling machine IXION BST 13 Baujahr / Year 1971 - Serial-No. 37919 Abmessungen / Dimensions 220 x 400 x 820mm Gewicht / Weight 50kgs Ijdpfx Aboxp H Dxs Tstc Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: ready for operation (used), Offered is a used Donau DR 32 rapid radial drilling machine series 731. Tool holder: MK4, spindle stroke: 200mm, outreach: approx. 900mm-1050mm, height adjustment: approx. 400-600mm, speed range: 40-2000rpm, feeds: 0.1/0.2/0.3/0.4mm per revolution, integrated coolant system, equipped with swiveling arm, large T-slot table, weight approx. 1500kg-1800kg, machine dimensions X/Y/Z approx. 1800mm/1000mm/2200mm. Inspection is possible by appointment. Itsdpfsykut Sjx Ab Tsc

Condition: ready for operation (used), Year of construction: 2006, MAXION BRK 35/4 Multi-Spindle Drilling Machine, year of manufacture 2006, equipped with 3 drilling units: BT 35 St / 1 unit - Continuous drilling capacity in steel: 60 mm - Tapping capacity: M 30 (1) - Spindle: MK 4 - Automatic feeds: 0.1 - 0.2 - 0.3 mm/rev - Drilling depth: 150 mm - Throat: 280 mm - Infinitely variable spindle speeds: 80 - 1,400 rpm BT 25 St / 2 units - Drilling capacity in steel (diameter): 25.0 / 30.0 mm - Throat: 260 mm - Drilling stroke: 120 mm - Spindle taper: 3 MK Itjdpfexz Sf Eox Ab Tec Table: - 390 x 420 mm - T-slots: 2x B 14.0 mm - Speed: 80 - 1400 rpm - Column diameter: 110 mm - Total power requirement: 0.7 / 1.3 kW The machine is in very good overall condition. Available from 15.12.2025 ex stock Bruchsal.

Condition: good (used), Year of construction: 2000, Drilling unit SUHER Power master, year of manufacture 2000. Isdpoxr Dlxefx Ab Totc

Condition: good (used), Year of construction: 2000, Drilling unit SUHNER Mono master Type: BEM12 ST25 1040, year 2000, equipped with Siemens motor. Isdsxr Dk Ujpfx Ab Tjtc

Condition: ready for operation (used), Year of construction: 1975, Column drilling machine Make CORDIA Type: S-18 Year.ca.1975 drilling in steel max.18mm spindle mounting : MK2 spindle speed : 90 -1450 rpm spindle stroke : 120 mm table:350 mm X 400 mm clamping surface;270 mm X 320 mm Space requirement : width 420mm depth 650mm height:2000 mm Iedohtri Ejpfx Ab Tetc Weight:ca.350 Kg. Machine is ready for use .

Year of construction: 1970, condition: ready for operation (used), Box column drilling machine Make ALZMETALL Type:AB4 HST Year 1970 Itodpsmp Tp Hsfx Ab Tec with coolant device . drilling capacity in steel max : 40 mm spindle mounting : MK4 spindle speed : 80-710 rpm feeds : 0.09 - 0.16 -0.28 mm/rev table size : 600X460 mm Machine is ready for use .

Condition: excellent (used), Year of construction: 1989, Column drilling machine, make GILLARDON, type: GB 45 VE, year 1989, in good condition. Equipped with thread cutting device, coolant system, machine lamp, machine documentation. Spindle taper: MT 4 Spindle speeds: 40–1100 rpm, motor power: 2.2 kW Maximum drilling capacity in steel: 45 mm – 55 mm Maximum drilling stroke: 200 mm 3 feeds: 0.1–0.16–0.25 mm/rev Maximum thread cutting in steel: M42 / M60 Table size: 560 mm x 450 mm Itedpfjx Hr Akex Ab Tec Required space: 1.3 m x 0.8 m x 2.1 m, weight approx. 740 kg.

Condition: excellent (used), Year of construction: 2000, Column drilling machine Fabr.IXION Type: BS 30 Year of manufacture: approx. 2000 Spindle holder :MK 3 spindle speed : 160-2800 rpm spindle stroke : 150 mm Drilling capacity in steel : 30 mm Table: 550 mm X 400 mm With machine vice jaw width 110 mm , drill chuck Röhm 1-13 mm Ijdstwnv Tjpfx Ab Tstc Machine has worked little has only drilled wood . Dimensions: 90 cm X 55 cm X 190 cm Weight: approx. 300 kg.

Condition: good (used), Column drilling machine Make ALZMETALL Type:AB 4 SJ ( year 1970 ) with coolant device, infinitely variable speed, with 2 gears. Drill hole in steel max: 40 mm Spindle mounting :MK 4 spindle speed : 80 -720 rpm Spindle stroke max : 150 mm feeds : 0.09 / 0,16 /0,28 mm/rev Table diameter : 560 mm Machine ready for use . Ijdpfx Abolq D Ake Totc

Condition: refurbished (used), functionality: fully functional, spindle mount: MK 4, total height: 1,970 mm, throat depth: 345 mm, spindle speed (max.): 720 rpm, spindle speed (min.): 80 rpm, 1.) Alzmetall AB4/SV Speed range: 80–720 rpm Feed: 0.09/0.16/0.28 mm/rev Spindle taper: MT4 Arm reach: approx. 345 mm Drive power: approx. 1.8 kW Column diameter: approx. Ø 160 mm Quill stroke: approx. 180 mm Table clamping surface: approx. 730x560 mm with 14 mm T-slots Dimensions: 1000x500x1970 mm Weight: approx. 600 kg Price: 2,400 EUR net plus VAT 2.) Gillardon GB30 Speed range: 60–1,600 rpm Spindle taper: MT3 Arm reach: approx. 320 mm Drive power: 1.1/1.6 kW Column diameter: approx. Ø 130 mm Quill stroke: approx. 175 mm Table clamping surface: approx. Ø 500 mm with 14 mm T-slots Table swivel range: approx. +/- 90° Dimensions: 1000x500x1970 mm Iedpfxounhtxs Ab Tstc Weight: approx. 400 kg

Condition: good (used), Year of construction: 1983, travel distance X-axis: 6,000 mm, Spindle diameter: 200 mm Machining width: 6000 mm Machining height: 3150 mm Isdpfx Abeykz A Ts Tstc Max. machining depth: 1985 mm Slide cross section: 530 x 550 mm Table load capacity: 20 t Plate field size: 11200 x 5550 mm Tool holder: SK 60 Machine weight approx.: 173 t Additional information: - Additional equipment: large and small angular heads - Listing No.: 22979 - The table is model S20 MP, size: 2200 x 2500 mm - The machining width on the X-axis of the machine is 6000 mm - Including 6 plates measuring 5600 mm x 1850 mm

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, x-travel 11,500 mm y-travel 4,500 mm Itjdpfx Ajykz Aysb Toc w-axis 1,600 mm z-axis 2,000 mm Spindle diameter 200 mm Rotary table 3,000 x 4,000 mm Bed length of rotary table 4,600 mm Tool holder SK50 Workpiece weight on rotary table 80 t Total power requirement 83 kW Additional information incl. 15 plates

Condition: good (used), Year of construction: 1999, throat depth: 1,600 mm, Drilling capacity in steel (diameter): 60 mm / MK5 Quill stroke: 310 mm Itjdpfoykza Sjx Ab Tjc Spindle speed: 28...2500 rpm Table size: 1470 x 986 mm Total power requirement: 4 kW Machine weight approx.: 4.6 t

Condition: good (used), Friedrich Deckel FP 2 LB Toolroom Milling Machine The accessories are not included in the scope of delivery but can be purchased separately. The Deckel FP 2 LB universal milling machine is characterized by its extremely stable base frame and is designed as a traveling column machine. This means that the machine maintains its precision even when machining heavy workpieces weighing up to 1000 kg. Another feature is the 45-degree inclined bed. After removing the universal table, this design allows for the direct clamping and machining of V-engine blocks with a 90-degree cylinder angle, such as those found in American V8 engines. The long travel of 800 mm is also advantageous in this application. Technical Specifications: Deckel Universal Milling Machine FP 2 LB Digital Display: 3-Axis Digital Display Heidenhain X-Axis Travel: 800 mm Y-Axis Travel: 300 mm Z-Axis Travel: 400 mm Tool Holder: SK 40, Drawbar Thread S 20 x 2 Milling Head Type: Vertical Milling Head Speed Range: 40 - 2000 rpm Number of Steps: 18 Table Type: Universal Swivel/Tilt Table (± 45° / ± 15°) Itodpfx Abegyw S Tj Toc Table Clamping Area: 1000 x 520 mm T-Slot Size: 16 mm Vise 160 mm Power Consumption: 9.5 kVA Weight: Approx. 1900 kg Dimensions: Approx. 1570 x 1675 x 1850 Financing through our bank is also possible. komplett-konzept.leasingo.de Other Items - New and Used - can be found in our shop! International shipping costs on request!

Condition: good (used), Mikron WF31D Precision milling and drilling machine Machine with chip and splash guard cabin Equipped with a Heidenhain TNC355 control system Technical specification The WF 31 D is a precision milling and drilling machine for series production and CNC training. Driven by an automatically shiftable stepped gearbox and Poly-V-belt. Vertical spindle can be extended by 90 mm; changeover from vertical to horizontal machining possible. Recirculating ball screws with DC drives enable simultaneous feed movements. Guides are protected against dust, chips and coolant. Itedpfx Abjwiucfe Tjc Technical data Manufacturer: Mikron Type WF31D Control: Heidenhain TNC 355 Longitudinal movement (X): 560 mm Transverse movement (Y): 500 mm Vertical movement (Z): 400 mm. Drive power: 3.3/4.0 kW Speed range: 40-4000 rpm. Feed speed: 2-3000 mm/min Rapid traverse speed X/Y: 6000 mm/min, Z: 5000 mm/min. Electrical equipment Total installed rated power: 10.0 kW installed effective power: 7.3 kW. Operating voltage: 3 x 380 V - 50/60 Hz Protection class: IP 54. Max. permissible ambient temperature: +35 °C Relative humidity: 75 %. Dimensions and weights Width 2450mm Length 2800mm Height 2000mm Net weight of the machine: approx. 2570 kg. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), Year of construction: 1971, Webo BR 35 V / 1250 Radial Drilling Machine Isdpfx Aoihfw Nsb Totc Working Area Distance from spindle to column: smallest 280 mm / largest 1250 mm Distance from spindle or drilling distance to table top: smallest 0 mm / largest 900 mm Distance from spindle to base plate: smallest 200 mm / largest 1400 mm Drill diameter: smallest 860 mm / largest 2800 mm Swivel range: 2,200 mm / clamping diameter approx. 240 mm Clamping area: upper 650 x 500 mm / side 770 x 500 mm Drill spindle diameter 40/85 mm Speed: 30 - 1800 rpm Year of manufacture: 1971 For further technical data, please refer to the machine card. Item condition: used, immaculate, and well maintained. Auction items: Only the Webo BR 35 V / 1250 without the reversible clamp shown. This can be purchased individually or as a bundle in our other auctions. Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more metalworking machines – new and used – in our shop! International shipping costs on request!

Condition: ready for operation (used), Gang Drilling Machine GILLARDON GB 20-3 from training workshop - 3 drilling units - Speed range / stepless 150–3000 rpm - Morse taper MK 3 - Speed display - Drilling depth stop - Left / right rotation - Work light - Foot switch - Drill chuck - Emergency stop Itodpfx Aoykpvnjb Tsc - Documentation Dimensions: LxWxH 1.6x1.2x1.8 meters / Weight: 1800 kg Errors and input mistakes excepted.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Full equipment for furniture production, Blum planning software with Easystick, new computer, large monitor, immediately ready for use Iedpfxsyk Hr He Ab Tetc