Used Press Hydraulic for sale (24,561)

Condition: ready for operation (used), controller manufacturer: Cadman B + Touch, throat depth: 400 mm, operating speed: 11 mm/s, reverse speed: 113 mm/s, total length: 4,355 mm, total width: 2,525 mm, total height: 3,000 mm, power: 20 kW (27.19 HP), travel distance Z-axis: 300 mm, empty load weight: 6,500 kg, passage width: 2,050 mm, table width: 150 mm, 8 assen: Y1 - Y2 - X - X' - Z1 - Z2 - R - V Easy Form Lasermeetsysteem (EFL) Wila modufix gereedschap (boven- en onderhydraulische klemming) lasersafe beveiliging 2 verplaatsbare plaatdragers Vergrote opening van 500 mm!! Capacity: 80 ton x 2500 mm Backgauge: CNC Hedex Imm Hjpfx Abrenh Max distance between table -- ram: 500 mm!! Locking speed: 130 mm/sec

Condition: good (used), Year of construction: 1993, functionality: fully functional, Technical data : Pressing force adjustable 10 - 100 kN throat depth 210 mm Table size W x D approx. 500 x 400 mm Hnjdpfxjykmaqo Abrjh Installation height with/without clamping plate 300 mm Stroke 100 mm Total power 2.5 kW Weight approx. 2.5 tons Oil filling approx. 150 ltr. Space requirement W x D x H approx. 0.95 x 1.5 x 1.95 m . Equipment and scope of delivery : . Travel / pressure changeover Pressure control valve with display on pressure gauge Adjustable holding time documentation .

Condition: used, Hydraulic Horizontal Straightening Press, Horizontal Press STENHOJ Type 40 Horizontal hydraulic press for straightening work on steel beams or welded structures Serial no. 42615 Year of manufacture: 1984 Refurbished in 2025 Hjdpfx Abjydqd Heronh Pressing force: 40 tons Ram stroke: 300 mm Piston rod diameter: 80 mm Working height: 780 mm (floor to center of piston rod) Table size without pressure pads: approx. 1000 x 290 mm Installation dimension, ram + press block to counter bearing: 260 mm (with pressure pads on ram and counter bearing) Installation dimension, ram without press block to counter bearing: 440 mm (without pressure pads on counter bearing) Height of the two adjustable pressure pads: 130 mm Pressure pad width: 220 mm Advance speed: 10 mm/s Return speed: 20 mm/s Hydraulic tank capacity: approx. 60 liters Motor power: 3 kW Power supply: 400 Volt, 50 Hz - Cylinder stroke operated manually via an actuation lever, sensitive control via mechanical control valve - Pressing force readable via pressure gauge - Ram stroke position with actual value display, digitally readable, ideal for precise repeatability of pressure points during straightening - 2 adjustable counter bearings via threaded spindle (centric parallel adjustment from 290 to 890 mm) - Straightening tools with rounded pressure faces - Infeed rollers for material support, centrally height-adjustable via handwheel (roller width = 250 mm) Required space (L x W x H): 170 x 140 x 100 cm Weight: 1250 kg In excellent condition

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 10022523, Equipment: documentation/manual, Hydraulic press for ceramics model SACMI PH1500, year 2007, column light 1600mm, complete with all its standard accessories and included: electrical panel, control panel, hydraulic power unit, set of power cables and pipes, traditional lifting. Fully functional machine Hodpev D Hbdsfx Abrsnh

Condition: new, Year of construction: 2026, functionality: fully functional, installation height: 500 mm, pressing force: 160 t, table width: 1,250 mm, table length: 800 mm, stroke length: 300 mm, EXNER EX SL 160 double column press NEW Machine is under construction Pressing force 1600 kN Installation height: 500 mm stroke: 300 mm Hnsdpjuw S A Dofx Abroh Table width: 1250 mm Table depth: 800 mm mech. depth stop

Year of construction: 1988, condition: ready for operation (used), Press force: 400kN, max. stroke: 300mm, max. tool dimensions X/Y: 280mm/550mm, min. tool dimensions X/Y: 90mm/90mm, max. total tool weight: 750kg, max. upper tool weight: 500kg, operating pressure: 260bar, weight: approx. 4500kg. An on-site inspection is possible. Hedpfx Abjyi E Dxjrenh

Condition: used, Double column press - Hydraulic Manufacturer REPKON Model 2000/800 kN Condition used Hnsdpfx Asudb Hcjbrjh description Pressure 200 t Column width 1600 mm ram stroke - max. 600 mm Installation height 900 mm Table width 1600 mm Table depth 1300 mm Table height 1060 mm ram surface 1600 x 1300 mm T-slots Din 650 / 22H12 Rapid traverse 400 mm/s Return speed 325 mm/s Pressing speed 42 mm/s at 40% mm/sec Pressing speed 20 mm/s at 100% mm/sec Die cushion pressure 800 kN Die cushion stroke 150 mm Die cushion speed to 68/ from 225 mm/sec Conversion year: 2001

Condition: like new (used), Year of construction: 2014, 4 meter width Nominal pressure 1250 kN CNC Back Gauge Hodpfxolqwvko Abronh Quick Change Tooling

Condition: new, Year of construction: 2025, Pressing force: 30 tons Piston stroke: 162 mm Working range (height): 30 – 1020 mm Table width: 535 mm Air pressure: 0.75 – 0.85 MPa Air connection: 1/4″ NPT Operation type: Manual-pneumatic Net weight: 153 kg Gross weight (with packaging): 173 kg Shipping dimensions: 1940 x 770 x 340 mm Structure thickness: Frame: 10 mm Table: 10 mm Prism: 28 mm Hsdoyi Un Hepfx Abrenh Fully welded steel construction – durability and resistance to deformation even under intensive use. Compact dimensions – ideal for small workshops and mobile workstations. Dual control system – can be operated manually or with compressed air. Included pressure gauge – real-time pressure control. V-block table – precise positioning of workpieces. Applications: Pressing and pressing pins, bushings, and bearings Bending and straightening workpieces Assembly of structural components Service and production work

Condition: used, Slightly used! Hnjdpfx Aboyizgijrjh

Condition: excellent (used), functionality: fully functional, Horizontal hydraulic layer press Two-hand operation Electrical connection 400V/50Hz, 200kg Hnedoxbgftspfx Abroh

Condition: good (used), Year of construction: 2012, Condition: 2012 overhauled to the latest UVV Installation height: 800 mm Ram stroke: 500 mm Projection: 360 mm Nominal force: 400 kN Hydraulic pressure: 160 bar Operating hours: 1356 Other: new control from Pilz, electrical circuit diagrams available Hodpfx Abjydlx Sersnh Video about functionality available

Condition: good (used), Maximum pressing force 10 tons. Working pressure 16 MPa Cylinder stroke 400 mm Down speed 100mm/sec Speed up to 450 mm/sec Power requirement 5.2 kW Weight 1.3 tons Clamping table changed! Not an original table! Hedpfxoydlvks Abrsnh

Condition: good (used), Year of construction: 1982, Press force: max. 200 kN Hnodpfx Ajydlutjbreh Safety distance: 100mm Post-travel: max. 10 mm Motor power: 3 kW

Condition: ready for operation (used), Year of construction: 1977, Immediately available ex location: Hydraulic double-column straightening press Dunkes Type HDSR 75 Year of manufacture: 1977 Pressing force: 165 t 3 cylinders, pressing force per cylinder: 75 / 65 / 25 t Table: 1500 x 500 mm Stroke: 350 mm Drive power: 3 / 15 kW Weight: 6 t Price: EUR 2,750— plus VAT, ex location Hnsdpfx Absyhz T Rsrjh

Condition: new, Year of construction: 2026, VIBER-SYSTEM WP100 Hydraulic Press Pressing force: 100 tons Piston stroke: 279.4 mm Working range (height): 101.6 – 1016 mm Working width: 812.8 mm Working pressure: 6.9 – 8.6 bar (100 – 125 PSI) Air connection: 1/4″ Operation type: Manual-pneumatic Dimensions (L × W × H): approx. 1092 × 991 × 1905 mm Hedpfjxdb Insx Abrjnh Net weight: 520 kg Gross weight (with packaging): 555 kg Structural element thickness: Frame: 15 mm, Table: 20 mm, Prism: 30 mm

Condition: refurbished (used), Year of construction: 1979, functionality: not functional, machine/vehicle number: 2374, total height: 2,800 mm, table height: 900 mm, installation height: 430 mm, total width: 1,600 mm, total length: 1,200 mm, pressing force: 100 t, table width: 580 mm, table length: 450 mm, operating speed: 180 mm/s, overall weight: 4,200 kg, reverse speed: 180 mm/s, ram plate width: 580 mm, ram plate length: 450 mm, distance table to ram: 430 mm, type of input current: three-phase, stroke length: 150 mm, oil tank capacity: 380 l, input voltage: 400 V, pressing speed: 25 mm/s, Equipment: documentation/manual, safety light barrier, The press is currently undergoing a complete overhaul. Cylinder seals have been replaced and the hydraulic pump has been tested for functionality. It is equipped with a hydraulic safety block that complies with the latest safety regulations. A completely new electrical system and PLC control, including a front safety light curtain, ensure the press is almost as good as new. Hnodpfxsxyxx As Abreh

Year of construction: 1998, condition: ready for operation (used), A Hymag hydraulic press is available. Pressing force: 15t, pressing pressure: 235bar, stroke: 250mm, drive: V30 D045, motor power: 7.5kW, oil requirement: 200l, run-on time: 40ms, safety distance: 80mm. The machine has a leak on the piston and the position measuring system is not working properly. Documentation available. On-site inspection is possible. Hodpfx Abov Scrnorsnh

Year of construction: 2018, condition: ready for operation (used), A dismantled Mecamaq hydraulic press is available. Pressing force: 100t, max. pressure: 290bar, main piston diameter: 200mm/120mm, auxiliary cylinder diameter: 40mm/25mm. Main cylinder working stroke: 500mm, max. installation height: 800mm, working height: 800mm, effective dimensions X/Y: 700mm/500mm, table dimensions X/Y: 800mm/500mm, working speed: 6mm/s, return speed: 150mm/s. Max. tool dimensions X/Y: 800mm/600mm, max. tool weight: 1000kg. Machine dimensions X/Y/Z: approx. 1000mm/1350mm/2750mm, weight: approx. 4000kg. Documentation available. On-site inspection is possible. Hjdpfx Abjwkiiierenh

Year of construction: 1989, condition: ready for operation (used), Drive power: 23kW, pressing force: 800kN, overrun distance: 25mm, overrun time: 93ms, safety distance: 148mm, oil capacity: 650l, weight: approx. 7000kg. Includes a Sick safety light curtain. An on-site inspection is possible. Hjdjw Na E Rjpfx Abronh

Year of construction: 1998, condition: ready for operation (used), Pressing force: 1600kN, installation height: 750mm, max. ram stroke: 500mm, clamping surface X/Y: 700mm/600mm, column passage: 800mm, lateral column opening: approx. 450mm. Distance between clamping plate and floor: 680mm, ram bore diameter H7: 60mm, rapid traverse down/up: 500/400mm/s, max. working speed: 35mm/s. Dimensions X/Y/Z: 2000mm/1500mm/3600mm, weight: approx. 16000kg, control: Panelware. Documentation available. An on-site inspection is possible. Hnsdettbd Tjpfx Abrsh

Condition: ready for operation (used), Year of construction: 1992, Compressive force: 1000kN/100t, ram stroke: 200mm, max. operating pressure: 290bar, control: DNC70, safety distance: 166mm, overtravel time: 104ms, overtravel distance: 7mm. Hnjdpfx Ajwcz Axobrsh

Condition: ready for operation (used), Pressing force: 10t, oil filling: 300l, max. pressure: 20bar, press type: C-column press, machine dimensions X/Y/Z: approx. 1250mm/1200mm/3000mm. On-site inspection is possible. Hsdet Uhz Nopfx Abronh

Year of construction: 1999, condition: ready for operation (used), A hydraulic press brake Baykal is available. Press force: 120t, bending length: 3100mm, motor power: 11kW, operating pressure: 240bar, piston stroke range: 130mm-180mm, max. upper tool weight: 103kg, max. lower tool weight: 180kg, max. overrun time: 80ms, min. safety distance: 130mm. Machine dimensions X/Y/Z: approx. 3500mm/1450mm/2300mm, weight: approx. 7200kg. Documentation available. An on-site inspection is possible. Hnedoyb Scropfx Abrjh

Year of construction: 1994, condition: ready for operation (used), Pressing force: 3150kN, table dimensions X/Y: 2500mm/1600mm, stroke (fixed): 280mm, stroke rate: 20-80strokes/min, weight: approx. 68000kg. Including Dreher transfer and feed line. The control system is defective. Documentation available. An on-site inspection is possible. Hnodpfxsxtff Ae Abroh