Used Raypath Germany for sale (9,025)

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Hsdpfx Asx Uyzqjhyeng 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 10,346 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, number of axes: 3, This 3-axis DOOSAN NX 6500 II was manufactured in 2019. It features a Heidenhain TNC 640 control, a table size of 1200 mm by 650 mm, and travels of 1050 mm in X, 650 mm in Y, and 650 mm in Z. The spindle reaches up to 20,000 rpm, and the tool magazine holds 30 positions. If you are looking to get high-quality milling capabilities consider the DOOSAN NX 6500 II machine we have for sale. Contact us for more information. • Table Length: 1200 mm • Table Width: 650 mm • Maximum Spindle Speed: 20000 rpm • Spindle: EPM spindle made in Germany • Spindle Taper: ISO 40 dual contact Hnsdpfx Ahsx Uq Hdsyog • Tool Magazine Capacity: 30 positions • X, Y, Z Axis Scales • Linear Guideways (LM guide) • MPG Handwheel • Operation and Maintenance Manuals Included

Condition: used, Thickness planing machine Bäuerle type DM63 for precise thickness processing of solid timber and wood-based materials. The machine is suitable for use in carpentry shops and industrial companies and enables vibration-free and dimensionally accurate planing due to its solid construction. Ideal for uniform calibration of workpieces in serial and individual production, equipped with a turning knife planing spindle from Leitz type CentroFix. Includes original spindle for strip planing knives. working width: 630 mm working height: 220 mm clearance height: 220 mm feed: 7 / 9 / 14 / 18 m/min knife: CentroFix Z4 Hnsdpfx Aex U Dvfjhyjg

Condition: good (used), Year of construction: 2019, operating hours: 11,000 h, functionality: fully functional, Cloos laser welding system in 2-station operation with automatic shuttle system for loading and unloading. Kemper extraction system. Safety technology. Hsdpfx Aeugv H Nohyjng Lifting weight of the turning devices per station 2000 kg. Technical data see description, chapter 2 System is available from October 2024 and has been regularly maintained. Location Germany. Demonstration and inspection possible. Services on request.

Condition: used, functionality: fully functional, Used workshop containers offered ex Korbach, Germany. CONTAINER TYPE: Workshop container, office container CONDITION UPON DELIVERY: Used, fully functional EQUIPMENT: - Exterior lighting - Heating - Fire extinguisher - Ramp - Electrically operated roller shutter - 65 Amp. electrical installation Hedpfx Asx Tqldohysng - Three-phase power connection DIMENSIONS LxWxH: approx. 5 x 4.05 x 4.20 m Weight: 7,000 kg DELIVERY: approx. 2 weeks lead time TRANSPORT: Please provide your postal code so we can prepare a free and non-binding quotation including container, delivery, and—if required—unloading from the truck. VARIETY: We also offer all common sizes of shipping containers (20DV, 40DV, 20HC, 40HC, etc.) to suit every requirement—whether for storage, construction projects, logistics solutions, or sea transport. We look forward to your inquiry! MAGITU GmbH

Condition: used, functionality: fully functional, Vecoplan chipper for lumber shavings 45/16/ 2V - made in Germany - perfect chips directly into the kiln - vibrating system TECHNICAL PARAMETERS: - width 450 mm - height 160 mm - number of knives 2 pieces - engine power 50 kW - rotor diameter 500 mm - rotor length 475 mm - sieve 40 x 40 mm - top pulling gear shaft 4 kW - bottom pulling gear shaft 2.2 kW - reverse - vibrating feeder 10500 mm x 450 mm - motor power 2.2 kW - cross vibrator machine 4500 mm x 2200 mm - motor power 1.5 kW - height 2450 mm Transport dimensions: 1050 cm x 245 cm x 245 cm weight ~ 4 t Hsdpfjt Hr Drjx Ahyeng

Condition: used, Year of construction: 2016, 2016 | Krampe SHL 20 | Used Roll Off-Tipper Truck Hnodpfx Ajx Ut U Dohyeg 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 29900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 16 inspection points 16 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Nice container lifter, all functions working. 269,397 km. Disc brakes. The saddle height of the semi-trailer is 1.20m. Unit deregistered January 17, 2024. TÜV has expired, DEKRA documents from the most recent inspection are available. The distance between the axles is 1.85m. Repair history: 2023 – Air spring replaced. 2022 – Brake pads replaced. 2022 – Control block coil replaced. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39582 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2022, Technical data: Process: 2-stage Filter surface area: approx. 17 m² Separation efficiency: >99% Welding fume separation class: W3 Extraction capacity: 1100 m³/h Hjdpfx Aoxbflrjhysng Extraction arm diameter: 150 mm Extraction arm length: 3 m Power supply: 3 x 400 V Motor power: 1.1 kW Sound pressure level: 70 dB(A) Dimensions (approx.): 785 x 730 x 950 mm Weight (approx.): 106 kg Features: - Made in Germany - Suitable for low to medium amounts of smoke/dust - Suitable for occasional to frequent use - Convenient filter replacement via service door - Extraction hood rotatable and pivotable by 360 degrees Equipment: - 3 new replacement main filters (approx. €330 each, new) - 7 new replacement pre-filters - 2 extraction hoods (one unused)

Condition: used, Compact edgebanding machine Hebrock EURO 3001 for precise edging of panel material with edge bands. The machine enables clean edge processing through automatic glue application, pressing rollers and post-processing aggregates. Ideal for furniture and interior construction. Technical data subject to change. Unit 1: Glue application Unit 2: caps Unit 3: Flush milling workpiece height: approx. 10 – 40 mm edge thickness: max. approx. 12 mm Hnsdpfoxdc D Rsx Ahyeg feed rate: approx. 10 m/min

Condition: used, mileage: 175,000 km, power: 96 kW (130.52 HP), first registration: 09/2014, fuel type: diesel, overall weight: 3,300 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 5,998 mm, Equipment: ABS, air conditioning, central locking, had accident, soot filter, Chat now via WhatsApp: Contact our sales advisor quickly and easily Internal ID number: [2543] ----Optional extras available: * Transmission makes noise! ----* German vehicle * Regularly maintained * Visual signs of use such as scratches, dents, and repainting present ... Special equipment: Roof storage/front roof storage shelf, electronic parking aid, reinforced rear suspension, front cup holder with ashtray and cigarette lighter, rear door (opening angle 270 degrees), Look package Other features: Driver's airbag, audio system: radio with CD player (MP3 compatible) - integrated display, electrically adjustable and heated exterior mirrors, exterior mirrors with wide-angle, integrated indicator lights in the mirrors, colored, brake assist, vehicle without start/stop system, body/body type: panel van large capacity, padded headrests, fuel tank: 90 liters, cargo partition, height-adjustable steering column (steering wheel), engine 2.2 L - 96 kW HDi FAP KAT, wheelbase 4035 mm, spare wheel identical to the regular tires, low emission according to Euro 5 standards, sliding door for cargo/passenger compartment on the right, SCR system (AdBlue technology), side protection strips, seat cover/upholstery: fabric, cab seats: double passenger bench, cab seats: driver's seat with lumbar support, permissible total weight 3.30 t ----Interested in leasing or financing? We offer attractive deals – down payment is not mandatory! Feel free to contact us. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 Hedsx Tb H Sjpfx Ahyeng 45711 Datteln – Germany Business Hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm Note: All details on the internet are non-binding and serve only as a general vehicle description. Errors, typographical mistakes, and prior sale reserved. The binding specification of the vehicle is determined exclusively by the purchase contract on site or through written commitments. Vehicles with a mileage of over 50,000 km or older than 3 years are preferably sold to our business customers.

Condition: ready for operation (used), functionality: limited functionality, drilling depth: 710 mm, rotational speed (max.): 1,250 rpm, spindle diameter: 100 mm, table length: 1,120 mm, table width: 1,250 mm, Placing a bid obligates you to collect the machine by the deadline of 28.01.2026! Prompt scheduling of an appointment is necessary after the end of the auction, as the machine has not yet been dismantled! TECHNICAL DETAILS Working spindle diameter: 100 mm Taper bore of working spindle: ISA steep taper No. 50 Drilling depth in one stroke: 710 mm Lowest position of spindle center above table surface: 0 mm Highest position of spindle center above table surface: 1,200 mm Maximum distance between spindle sleeve and tailstock: 2,300 mm Horizontal travel of tailstock: 1,300 mm Spindle speed: 6 - 1,250 rpm Clamping surface of the table: 1,120 mm x 1,250 mm Longitudinal travel of the table: 1,300 mm Cross travel of the table: 1,200 mm 34 feeds for spindle, headstock, and table: 0.017 - mm/rev Stepless feeds for headstock and table: 20 - 1,000 mm/min Rapid traverse in all directions: 2,800 mm/min MACHINE DETAILS Main motor power: 11 kW Main motor speed: 1,450 rpm Power supply: Three-phase current Voltage: 380 Volt Frequency: 50 Hz EQUIPMENT Documentation incl. wiring diagram Electrical diagrams Hnedpfex Hfugsx Ahysg Operating manuals Note: Brake defective, clutch removed (included). Repair costs in Germany approx. €3,000.

Condition: used, machine/vehicle number: 007829, Position 1: Front-Loading Panel Saws SCHELLING-FH 4 430/220-P Hnodpowu Ahgjfx Ahysg Position 2: Automated Warehouse SCHELLING-FH 4 430/220-P

Condition: used, Year of construction: 2006, operating hours: 3,446 h, 2006 | Moxy MT 41 | Used Articulated Dump Truck | 3446 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 79800 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 64 inspection points 56 approved ✅ 8 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The vehicle in question is in a used condition commensurate with its age and mileage. Hnodpfsx Ut Udsx Ahyjg 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "35706 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, functionality: fully functional, Various gearboxes and geared motors Hsdex Ez Efspfx Ahyong "Made in Germany": Bauer, Dempewolf, Flender, KWE, PWH, SEW, WGW All gearboxes have been function tested

Condition: used, Available: 1 Price per piece: 45.00 € + VAT knife: Z4 flight circle (ø): 156 mm drilling: 60 mm length: 78 mm Hnsdpfeq Sb U Dsx Ahyjg radius: R1.75

Condition: ready for operation (used), Year of construction: 2003, This F&O 03035 laminating press was manufactured in 2003. It features a working width of 1300 mm and a melting unit capacity of 200 kg. The outfeed roller conveyor is approximately 9000 mm long. In 2024, the infeed conveyor was upgraded with 4 brushes and radiant heaters. Consider the opportunity to buy this F&O 03035 laminating press. Contact us for more information. Hsdpfx Aex Tkazehyong Application Types Pressing / Laminating

Condition: used, machine/vehicle number: 007485, Position 1: Angular Beam Panel Saws IMA-COMBIMA SYSTEM + AH6 Position 2: Panel Stacking and Offloading IMA-COMBIMA SYSTEM + AH6 Position 3: Panel Stacking and Offloading IMA-COMBIMA SYSTEM + AH6 Position 4: Panel Turning Device IMA-COMBIMA SYSTEM + AH6 Position 5: bordatriceLottoUno IMA-COMBIMA SYSTEM + AH6 Position 6: bordatriceLottoUno IMA-COMBIMA SYSTEM + AH6 Position 7: bordatriceLottoUno IMA-COMBIMA SYSTEM + AH6 Position 8: bordatriceLottoUno IMA-COMBIMA SYSTEM + AH6 Position 9: Panel Turning Device IMA-COMBIMA SYSTEM + AH6 Position 10: Panel Stacking and Offloading IMA-COMBIMA SYSTEM + AH6 Position 11: Roller Conveyors IMA-COMBIMA SYSTEM + AH6 Hnsdpjwuz Aijfx Ahysg

Condition: used, Year of construction: 2014, operating hours: 12,012 h, 2014 | Caterpillar 735B | Used Articulated Dump Truck | 12012 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 89800 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 62 inspection points 56 approved ✅ 6 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is immediately ready for use, has cracks on the hood and fenders, and the pipe bucket heating is missing. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39792 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform. Hedpox Twazofx Ahyeng

Condition: used, Items as new or nearly new and used wood drills mainly in sizes 10, 13 and 26 mm. Remaining stock of a double-end profiler with drilling assemblies. Hsdpfex Tvbwjx Ahyeng

Condition: ready for operation (used), Year of construction: 1998, Control Unit Brand BOSCH Model OSA3 Main Drive Number of axis 4 Movement X-Axis Movement 2000 mm Y-Axis Movement 500 mm Z-Axis Movement 500 mm Tools Number of index 48 Type of tool holder HSK63 Media Hjdpfx Ahox Tkabjyong Chip conveyor Yes This 4-axis Matec 30 L gantry milling machine was manufactured in 1998. Consider the opportunity to buy this Matec 30 L gantry milling machine. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2015, operating hours: 11,221 h, 2015 | Komatsu HM300-3 | Used Articulated Dump Truck | 11221 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 87900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 62 inspection points 57 approved ✅ 1 imperfect ℹ️ 4 issues ⚠️ 📌 Inspector's Comment: Hood damaged, will be replaced. Collision damage will also be repaired. The machine was operated with lime, which can lead to additional wear. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39844 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Hnsdpfx Ahsx Twaneyjg 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Available: 2 pieces Price per piece: 239.00 € + VAT knife: Strip planer blade Z2+ chamfer cutter flight circle (ø): 125 mm drilling: 40 mm length: 170 mm Hnedpfex Tu Rwex Ahyog material: steel

Condition: used, Year of construction: 2007, operating hours: 835 h, 2007 | Genie GS-2646 | Used Scissor Lift | 835 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 4400 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert Hnjdpfxjx Tr D Is Ahyjg 34 inspection points 30 approved ✅ 0 imperfect ℹ️ 4 issues ⚠️ 📌 Inspector's Comment: fully functional 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40002 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Available: 4 pieces Price per piece: 60.00 € + VAT. diameter: 60 mm Hnodpfx Ahex Tu E Ueyog drilling: 40 mm length: total: 167 mm Available: 4

Condition: used, Year of construction: 2015, operating hours: 4,186 h, 2015 | Hitachi ZX48U-5A CLR with 3 excavator buckets | Used Tracked Excavator | 4186 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 33900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Hedsx Trmpspfx Ahyjng 👷‍♂️ Inspected by an independent expert 67 inspection points 61 approved ✅ 6 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: well-maintained machine, boom newly re-pinned 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40014 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.