Welding fume extraction

Schweißkraft SRF Profi

Condition: excellent (used), belt driven Flow rate 14500 m3/h Negative pressure 3091 Pa Motor power 22 kW Speed ​​2340 rpm Suction DM 500 mm Outlet DM 400 x 500 mm Dimensions L x W x H = 1800 x 1300 x 1250 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!) Ibsdpfxeh Tfqhs Angeb

Condition: ready for operation (used), Year of construction: 2013, This Okuma MCR-A5C30x65 gantry milling machine was manufactured in 2013. It features a robust 100 mm spindle, capable of speeds up to 4000 min⁻¹, and accommodates a maximum workpiece size of 2540 mm by 5540 mm. The machine supports a hefty 30,000 kg on its 2500 × 6300 mm table. Ideal for heavy-duty milling with a rapid feed rate of 20,000 mm/min. Contact us for more information about this machine. Ibodpfex D S Ekox Angob Machine Benefits Technical Machine Benefits • Dimensions of machine (lxwxh): 2500 mm x 6600 mm x 6350 mm / weight (kg): 59000 kg • Max workpiece width: 2540 mm / max workpiece length: 5540 mm • Table size (width × length): 2500 mm × 6300 mm /max load on table: 30000 kg table height from floor: 850 mm /effective width between columns: 3050 mm/ t-slot (width × number): 24h7 × 13 • Cutting feed rate: 1 to 10000 mm/min/ rapid feed rate: 20000 mm/min/ table movement x-axis: 6500 mm /x-axis travel: 6500 mm /y-axis travel: 3500 mm/ z-axis travel: 650 mm • Tool holder: bt50 + masz type/ tool storage capacity: 50 tools /max tool length: 300 mm • Power supply: 400v, 3 /phases, 50hz rated capacity: 513 kva /full load current: 741 a /peak current: 117/138 a /short circuit current: 18 ka • Spindle diameter: 100 mm /spindle speed: 30 to 4000 min⁻¹ • Large table size suitable for heavy loads. /extensive tool storage capacity. /high rapid feed rate for efficient operations.

Condition: good (used), Year of construction: 1999, CONFIGURATION, ARCHITECTURE: PARALLEL LATHE GUIDANCE: PRISMATIC, 3 WAYS THE CARRIAGE CAN MOVE WITHOUT INTERFERING WITH THE TAILSTOCK AND STEADY RESTS, ESPECIALLY SUITABLE FOR SHAFTS DISTANCE BETWEEN CHUCK AND TAILSTOCK: 6000 mm CHUCK DIAMETER: 1000 mm SWING OVER BED: 1020 mm TURNABLE DIAMETER: 700 mm BED WIDTH: 900 mm LOAD CAPACITY BETWEEN CHUCK AND TAILSTOCK: 12,000 kg 4-POSITION AUTOMATIC TOOL TURRET: YES MOTORIZED TAILSTOCK: YES SPINDLE SPEED: 1–720 rpm CONTROL (BRAND/MODEL): SIEMENS 840 D POWER LINE AIR CONDITIONING IN ELECTRICAL CABINET: YES CHIP CONVEYOR: YES, DRAG-TYPE, NEW IN 2021 EXTRAS OPEN STEADY REST: 2 UNITS CLOSED STEADY REST: 1 UNIT INSTALLED MACHINE DIMENSIONS (L x W x H): 14 x 3 x 2.5 Ibodjyhrnuspfx Angeb

Condition: reconditioned (used), K.H.D. Calibrator 1300H . Without frame . With hydraulic-unit, electric motor and Voith Turbo coupling . With new cone and shell . Isdpfsvt Su Iex Angsbb Overhauled, sandblasted and painted .

Condition: ready for operation (used), Year of construction: 2018, operating hours: 18,845 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 53 mm, travel distance Z-axis: 830 mm, spindle motor power: 33,000 W, controller manufacturer: SIEMENS, controller model: 828D, number of axes: 3, This 3-axis DOOSAN Puma 2600 SY II was manufactured in 2018, designed for precision in horizontal turning. Ideal for complex machining tasks, this machine ensures robust performance and durability. If you are looking to get high quality turning capabilities consider the DOOSAN Puma 2600 SY II machine we have for sale. Contact us for more information. Additional equipment • Mekiload Gantry Loader • Renishaw Equator • Renishaw Equator • Machine includes a rotary indexing magazine Ijdpfsyr R A Ejx Angsbb • Machine includes a gantry robot Machine Benefits Qualitative Machine Benefits • Tool change time: 1. 0 second • Max speed (station): 5000 rpm • Holder for turning tools: 25 x 25 mm • Holder for boring bar: Ø50 mm • Coolant pump capacity: 1. 5 kw Technical Machine Benefits • Max. Turning diameter over bed: 780 mm • Max. Turning diameter over slide: 630 mm • Max. Turning length: 760 mm • Main spindle torque: 719 nm • Spindle mount (main): a2 #8 • Sub spindle speed: 6000 rpm • Sub spindle power (30 min): 18. 2 kw • Sub spindle torque: 220 nm • Spindle mount (sub): a2 #5 • Number of stations: 24 (12 driven) Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2023, This CLOOS Instant pro IRPS was manufactured in 2023. It features a QIROX welding robot with a maximum payload of 10 kg and a working range of Ø 3900 mm. Equipped with advanced QC 2 control system, it includes a programming handheld device and supports new tandem leading/trailing processes. Ideal for high-quality welding applications, it also comes with a comprehensive set of welding and sensor technologies. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Working range: Ø 3900 mm • Programming handheld device with touchscreen • Qirox technology interface Iedpfxeyaimlo Angsbb • Tool controller ctms • Tcp measuring device Extra Information Welding Technology Power source Arc sensor Water cooling module Control module Wire drive unit Robot welding torch Software Parameter grinding Distance-dependent transition between parameter lists Multi-layer technology Programmable pendulum figures Software language: German IRPS Scanner Control IPC Rittal control cabinet Touch screen Scanner interface Uninterruptible power supply Scan width: 1000 mm at 500 mm product height Scan speed: 300 to 1000 mm/sec Burner Cleaning Unit Torch cleaning device Compressed air amplifier Wire cutter Control Unit Digital inputs/outputs: 16 Serial interface Computer connection: QIROX controller CAN bus USB interfaces: 2 Flash memory: 8 GB Buffer module: 24V Point editor Expandable to up to 16 axes

Condition: used, x x x dismantled x +++++ Ibjdeip Rdlepfx Angsb Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: as good as new (ex-display), Year of construction: 2026, SRF Master, illustration on the left 2 m extraction arm Application area Low amounts of smoke/dust Occasional use Benefits Requires little readjustment of the extraction hood More flexible due to the additional hose connection at the rear Features Safe operation thanks to filter monitoring Extraction hood can be rotated and swiveled 360 degrees Sliding handle and cable holder Process: 3-stage Filter type: Disposable filter Filter area: approx. 12 m² Separation rate: > 99% Iodpfxedqzbre Angobb Filter material: Glass fiber fleece Welding fume separation class: W3 Additional filters: Two pre-filters Basic data Extraction capacity: max. 950 m³/h Diameter of extraction arm: Ø 150 mm Length of extraction arm: 2 m Diameter of suction connection: Ø 150 mm Power connection: 230 V / 50 Hz Motor power: 1.1 kW Sound pressure level: 72 dB(A) Dimensions (W x D x H): 705 x 655 x 900 mm Weight: approx. 71 kg

Condition: new, Year of construction: 2025, functionality: fully functional, Cabinet Sandblasting Machine CORMAK 1200L is a premium industrial-grade surface treatment device designed for high-efficiency abrasive blasting operations. Its double-sided construction with two independent working stations allows two operators to work simultaneously, significantly increasing productivity and reducing downtime. The cabinet is designed for intensive use in workshops, regeneration facilities, shipyards, automotive, aerospace, and heavy industries. Main advantages of the machine Large 1200-liter working chamber – enables sandblasting of large metal components and structural elements. Double-sided operation – two pairs of gloves, two blasting guns, two control systems, and two cyclone extraction units allow two operators to work at the same time. Dust-free operation thanks to efficient extraction systems and sealed perimeter gaskets. Durable steel construction – designed for demanding industrial environments. Compatibility with various abrasives: corundum, glass beads, electrocorundum, crushed shells, and technical sand. 15 replaceable protective visor films – ensure long-lasting visibility during operation. Intuitive operation – foot pedals, ergonomically positioned connections, and pressure control systems. Ibsdpjv Aad Aefx Angeb Construction and technology The CORMAK 1200L model is manufactured from high-quality steel and protected against corrosion. Two working stations located on opposite sides of the cabinet allow simultaneous blasting from both sides of the workpiece. Each station is equipped with an independent blasting gun, pressure regulator, foot pedal control, and cyclone dust extraction system. This solution ensures high productivity while maintaining safety standards and operator comfort. The spacious interior and wide access openings allow easy handling of large components. Precision and work efficiency The operating pressure range of 4–8 bar allows adjustment of blasting parameters according to the type of material and abrasive used. The dual nozzle system and independent workstations guarantee high productivity without compromising precision. Closed-loop operation combined with an efficient dust extraction system provides the operator with excellent visibility and a clean working environment. Applications The CORMAK 1200L cabinet sandblasting machine is a versatile industrial solution suitable for many applications, including: Sandblasting of wheels, frames, suspension components, and body parts. Metal blasting in manufacturing and repair facilities. Surface preparation before powder coating, galvanizing, or welding. Cleaning, smoothing, and restoration of industrial, wooden, and plastic components. Professional abrasive blasting applications requiring fast, precise, and clean surface treatment. Standard equipment 8 ceramic blasting nozzles 15 replaceable protective visor films 2 industrial blasting guns 2 pairs of protective gloves integrated into the cabinet 2 cyclone dust extraction systems 2 pressure regulators 2 foot control systems Technical specifications – CORMAK 1200L cabinet sandblasting machine Parameter Specification Internal cabinet dimensions 1150 x 1260 x 800 mm External dimensions 1800 x 1400 x 1880 mm Operating pressure 4–8 bar Capacity 1200 L Abrasive materials Corundum, glass abrasive, sand Weight 196 kg Note: The machine is supplied in a self-assembly version.

Condition: used, 1 used welding machine Manufacturer: Fronius Model: Synergic 3400 G/W/E Suitable for welding steel, stainless steel, and aluminium using the MIG/MAG process. Ijdpsyl Id Tsfx Angebb Technical specifications: Max. welding current: 340 A Wire diameter: 0.8/1.0/1.2 mm possible Connection voltage: 380 volts Duty cycle (ED) 35% at 340 A Digital display Dimensions (L x W x H): 890 x 460 x 945 mm Total weight: 139 kg