Used Resistance Soldering for sale (1,816)

Condition: good (used), Year of construction: 2008, functionality: fully functional, Year of manufacture 04/2008 400 mm working width Finger conveyor Lifting and lowering station Spray fluxer Bodpfx Asv Ta Hlsfnowg Dynamic preheating at the bottom Convection heating

Year of construction: 1997, condition: ready for operation (used), Seho 8040 PCS with laminar and turbulent wave, preheating with heating plates and IR radiator, minimum quantity flux system, component cooler at the outlet, wave width: 400mm, max. usable working width: 390mm, max. component height: 100mm, max. PCB length: 562mm, solder nozzle: Delta B, max. wave height: 8mm, solder volume: 400kg, heating capacity solder pot: 9kW, heating-up time 20-250°C: approx. 150min, heating-up time 190-250°C: approx. 60min, preheating zone length: 700mm, three heating zones: 3x 3kW, max. preheating capacity: 9kW, transport angle: manually adjustable, 6-8°, transport speed: 0.5-2m/min, running direction: from left to right, with loading aid/slide conveyor (1000mm), unloading aid (500mm) and entry stopper for solder frame separation, exhaust connection diameter: 2x 150mm, extraction capacity per connection: 500m³/h, supply voltage (50Hz): 230/400V, rated power: 31,000W, total connected load: 18.5kW, compressed air connection: R 1/4 inch (6 bar), nitrogen connection: R 1/4 inch (6 bar). With microprocessor control PCS 96, alphanumeric display & membrane keypad (16 lines of 40 characters), 100 soldering programs, interface for host computer with visualized machine overview & BDE data backup, interface for BDE data acquisition via serial printer, control loop for transport and heating. Length: 2300mm, width: 825mm, height: 1615mm, weight without solder filling: 400kg. Bjdpfow Uk Aqex Afnjwg

Year of construction: 2010, operating hours: 63 h, condition: used, functionality: fully functional, incl. Chilly 45-S cooling unit Bjdewtnxzepfx Afnewg

Year of construction: 2017, condition: used, functionality: unexamined, SMT reflow oven Condition as follows: - Transport OK - Needs cleaning - Basic functionality OK - Forced cooling not tested - Seals should be replaced and a new lambda probe is required Immediately available Bodpfxjxbp Nbj Afnewg

Condition: ready for operation (used), Resistance Welding Machine, Resistance Welder, Meritus RAS 150 VSH, Used Machine Manufacturer: Meritus Type: RAS150VSH, MPW-RW 811-1410 Overall dimensions: 900 x 1370 x 2450 mm Electrical data: 415 V; 150 kVA; 50 Hz Bwodpfx Asrdf Acsfnjg Equipped with light gate Tool water cooling

Year of construction: 2019, operating hours: 46,318 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 19051296729, No minimum price – guaranteed sale to the highest bidder! EQUIPMENT - Fixed double-lane pin chain conveyor module - Gripper head with rotation and tilt function - Workpiece carrier EDH-ER + G08 - Double preheating cassette, 8 × quartz radiators - Pyrometer control for quartz preheating Additional equipment details can be found in the attached PDF. Operating hours: 46,318 (as of 10.07.2025) Further information according to manufacturer – without guarantee. TECHNICAL DETAILS - Repeat accuracy: ± 0.1 mm - Rotation function: 0–270° - Soldering angle adjustment: 0–12° by tilting the gripper - Max. workpiece size: 500 × 500 mm - Max. solder tip temperature: up to 350 °C MACHINE DETAILS - Rated voltage: 230/400 V - 50 Hz - Rated power: 18,000 W Dimensions & Weight Installation dimensions (W x D x H): 2,170 x 2,110 mm Nitrogen and compressed air connections - Nitrogen connection: R 1/4″, min. 4 bar - Nitrogen consumption (single nozzle): approx. 1.5–2.0 m³/h - Recommended nitrogen value: 5.0 - Compressed air connection: R 1/4″, min. 6 bar - Exhaust: 1 × 500–600 m³/h Bwedpfxowzu Ure Afnog Commissioning note: The machine must be connected to the manufacturer via VPN once in order to reactivate the control system.

Condition: used, very good condition Bwedpfxehc T Irs Afneg

Condition: ready for operation (used), Soldering volume: approx. 400kg, wave width: 400mm, usable working width: 390mm, max. component height: 100mm, max. PCB length: 562mm, heating power crucible: 9kW, heating time 20°C-250°C/190°C-250°C: 150min/60min, transport speed: 2m/min, power requirement: 18.5kW. Machine dimensions X/Y/Z: approx. 2300mm/850mm/1650mm, empty weight: approx. 450kg. Documentation available. Bodpfx Afsud Svzsnewg

Condition: like new (used), Year of construction: 2022, Ex demo unit. Like new condition. Ask for additional details! Bsdpew Dtgrjfx Afnowg

Year of construction: 2024, condition: new, functionality: fully functional, Protective cable conduits, electrical installation hoses from Pipelife at a special price. FXP20 (KUP) Total quantity: 9,000 m (180 bundles) Item number: KU-P-AS-E-MF-LSZH 20 Packaging: 50 m per bundle FXP40 (KUP) Total quantity: 6,300 m (252 bundles) Item number: KU-P-AS-E-MF-LSZH 40 Packaging: 25 m per bundle FXP25 UV (RPE) Total quantity: 11,200 m (224 bundles) Item number: RP-E-SF-UV 25 Diameter: 25 mm Packaging: 50 m per bundle Special feature: cable protection conduit with additional UV protection FXP50 UV (RPE) Bwedpfx Aewtfiwjfnjg Total quantity: 6,000 m (240 bundles) Item number: RP-E-SF-UV 50 Diameter: 50 mm Packaging: 25 m per bundle Special feature: cable protection conduit with additional UV protection All items are available for immediate delivery. Partial orders are also possible.

Condition: ready for operation (used), 6355 Resistance Welding Machine , Resistance Welding , Meritus RAS 150 VSH Resistance Welding Machine , Resistance Welding , Meritus RAS 150 VSH, Used machine Manufacturer : Meritus Type : RAS 150 VSH Overall dimensions : 1000 x 1620 x 2100 mm Weight : 840 kg Electrical data : 415 V ; 150 kVA ; 50 Hz - equipped with a photocell - tool water cooled Bwjdpeu Nvh Uofx Afnjg

Year of construction: 2005, condition: ready for operation (used), The system has been switched off since 2014. Until then, all maintenance was carried out. Soldering width: 400mm, preheating zones: 6, convection heating length: 2000mm, soldering wave width: 450mm, max. soldering wave height with F-nozzle: 8mm. Total length: approx. 30m, infeed conveyor with stacker for return transport: approx. 14m, fluxer and soldering module: approx. 11m, outfeed conveyor with stacker for return transport: approx. 7m. Documentation available. Including 350kg solder, 3 loading tables, 40 outer frames and some spare parts. On-site inspection is possible. Bwedpfx Aettmp Tefnog

Condition: like new (used), Year of construction: 2022, Machine like new condition. Ex demo machine. Bjdpfx Aow Dr Tqsfnewg Ask for additional information!

Year of construction: 2009, condition: ready for operation (used), Connected load: 18kW, was overhauled in 2017, an inspection is possible. Bwsdpjn Htktefx Afnog

Condition: used, Year of construction: 2011, Operational condition machine. Two pots. Variable Z system. One lead free (SAC 305) and one leaded (Sn63Pb37). If needed, the inner pot can also be made lead free with additional cost. Can be bought with nitrogen generator. Bedpewzr Agofx Afnswg Ask for additional details!

Year of construction: 2016, condition: ready for operation (used), Suitable for stainless steel wire: 1.4301, 1.4310, 1.4401, wire diameter: 0.25-0.5mm with a strength up to 2400 N/mm², working speed: 75-80m/min, temperature range: 400-650°C, suitable for four wires at the same time with one temperature gauge (movable), shielding gas: forming gas grade 95/5 95%N2/5%H2, nitrogen gas, cooling: water-cooled tubes. Bwsdpfjn R Nhqsx Afnsg

Condition: used, Year of construction: 2008, Machine in operational condition, however due to its age, sold without warranty. Ask for additional details! Bodpfswnfbvex Afnswg

Condition: used, Year of construction: 2023, 2 systems available, one 2019 and 2023. Bwodswcrdtjpfx Afnsg Ask for additional information!

Condition: used, Year of construction: 2006, -Spray fluxer -2x medium-wave preheating cassettes -1x dynamic preheater -1x bottom convection preheater -Dual wave with chip pre-nozzle + ERSA Power Wave - Cooling unit at the outfeed -Synchronous code reading system upstream of the soldering system -Roller buffer at the outfeed -Motor-driven infeed conveyor with chain Bjdpfx Afswcf Rasnswg Ask for additional information.

Year of construction: 2009, condition: not inspected (used), Reflow oven in operational condition. R to L configuration with SMEMA. Bwedpfx Afovfp Nmsnjg Ask for additional information!

Condition: used, Year of construction: 2013, Segment: Fluxer Storage space for flux canister under the fluxer Alcohol-based flux Segment: Preheating Medium-wave heating from below, convection from above Segment: Pre-warming 8 quartz radiators, controllable in groups of 4 Segment: Preheating + Divided Solder Pot Long-wave heating plate Solder nozzle with leaded solder, 1st section Solder pot with lead-free solder, 2nd section (out of operation) Availability in end of Q2 2025. Ask for additinal information! Bsdev Sy Akepfx Afnswg

Condition: used, Soldering station, soldering iron, chip solder, soldering system, desoldering station -Manufacturer: Weller, desoldering station type WDD 81V -Voltage: 230/24 V -Operating pressure: 4-6 bar Bjdpfx Aetu Rk Ejfnowg -Dimensions: 190/120/H110mm -Weight: 2.3 kg

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Bwjdpfxohwhf Aj Afnjg Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: used, Year of construction: 2020, sweeping width 942 mm working width Bodendüse: 700 mm tank Reinigung: 79 l Bwjdpsgvqzgefx Afneg tank Schmutzwasser: 83 l weight of the machine ca. 145 kg dimensions of the machine ca. 1,32 x 0,7 x 1,1 m - Exhibition machine and demonstration machine, like new- - Most compact ride-on scrubber-dryer from DiBO with 2 brushes - Possibility to dispense detergent: in ECO mode with constant Saving or automatic regulation of the machine depending on the speed of the machine Brush motors and suction: even less energy consumption, even more Smoothness - Display: large, multilingual, including hour counter, battery level and work programs - Memory card: allows the storage of battery charge cycles and Power consumption of the motor - CFS system: water distribution from the middle of the brush to avoid waste Avoid cleaning solution - SLS system: self-leveling electronic system to keep the brush always lies perfectly on the floor - EDD system: suction cup for the best results during drying and during Area performance was developed - Wheels: oil resistant - Extraction: 2 levels with fans and stainless steel shaft

Condition: new, cutting diameter 250 mm saw band length 2950 mm cutting width 280 mm dimensions of saw-band 2950 x 27 x 0,9 mm capacity 90 degrees: flat 280 x 200 mm capacity 90 degrees: square 230 mm capacity 45 degrees: round 190 mm capacity 45 degrees: flat 180 x 180 mm capacity 45 degrees: square 180 mm capacity 60 degrees: round 120 mm capacity 60 degrees: flat 110 x 110 mm capacity 60 degrees: square 110 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 0,4 t Powerful miter band saw for cuts from 0 ° to 60 ° left -CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and switch-off at the end of the cut) Description: -Manual cutting cycle -AUTOMATIC CUT: (via selector switch) with stepless settings of the Bjdpfx Aexz Hhzefnswg Lowering speed and adjustment of the cutting pressure via compensating spring -Stable, torsion-resistant and low-vibration saw frame made of cast steel -Vice with quick release - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Hydraulic unit for the saw band tension and monitoring with display on Manometer (belt tension = 900 kg) -Clearly arranged control panel with all controls -Electric coolant pump for cooling and lubricating the saw band -Schipping brush for cleaning the saw band