Used Roller Cutter for sale (11,219)

Condition: used, Year of construction: 2018, Second-hand machine Year of manufacture: 2018 Special feature: Machine with a gluing height of up to 100 mm! Condition: factory-inspected by Lange Maschinenbau Features and technical specifications: - Machine table with 13 rollers for improved workpiece guidance - Edge feed, operating in synchronisation with the belt feed - Edge thickness adjustable via digital display - Pneumatic roll separation with blade (for edges suitable for cutting) - three pressure rollers - Belt feed: - 0.25 kW - approx. 1,250 mm long – approx. 6.0 m/min - 50 mm wide toothed belt with a thick rubber lining to protect the workpiece - Digital display for height adjustment - Direct glue application to the workpiece: leak-proof glue tank with glue supply from below and rapid heat-up time after machine shutdown - Flush-trimming unit: - for the front and rear edges of the workpiece - automatic workpiece detection - Pneumatic trimming with a blade for sharp-edged cuts - Flush milling unit - with vertical scanning and horizontal guidance - Reproducible adjustment via digital displays - 2 powerful 0.4 kW high-frequency motors - continuously adjustable from 4,000 to 18,000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction connection Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter via the belt feed - Workpiece support surface approx. 1800 mm long throughout - Workpiece support rail, extendable by approx. 300 mm - Rotating film tray Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm Kodpfx Aiezk Nmroijdr - Roll cutting: max. 1.0 x 55 mm, 2 x 45 mm - Glue pan heating capacity: 2.7 kW - Heating-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400 V, 50 Hz, 3-phase + N - Total power requirement: 3.8 kW - Pneumatic connection: 6 bar Dimensions (excluding film tray): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: at short notice Storage location: Flörsheim

Condition: ready for operation (used), Year of construction: 2010, Large semi-automated Pace cutting system Polar 137 XT-Autotrim with pile lifter, jogging system with count scale, gripper transport system, rotary gripper, and delivery unit Year: 2010 Approx. 5.43 million cuts Workflow: The material to be cut is raised to an optimal working height using a loading lift, placed into the jogger by the operator, automatically jogged, and then transported via the Autotrans gripper system from behind the jogger to the rear table of the high-speed cutter and rotated. After cutting, the Transomat automatically stacks the layers onto a pallet, allowing continuous cutting operations. Polar Stack Lift LW 1200-4 Platform size: 80 x 126 mm Load capacity: 1200 kg Equipped with steplessly adjustable photoelectric sensors for automatic lifting and lowering. Jogger RAH-4 with air removal roller and unloading for rear-table feeding Working format up to 75 x 105 cm Unloading of the jogged cutting material occurs automatically to the rear into the STR stacking rack. The Autotrans gripper transport system then handles layer transport onto the rear table of the high-speed cutter. Sheet scale – Polar count scale Avery Weigh-Tronix For creating quantity-accurate cutting layers Ksdpsxd U Saefx Aiiedr Gripper transport system POLAR Autoturn – clamp transporter for rear-table loading and rotary gripper Takes over the prepared cutting layer from the stack rack or buffer table Via air tables, which use air cushion for optimized material handling, the cut material is transported directly onto the rear table of the high-speed cutter and placed with precision. The cutting layer is held firmly by the grippers during transport, ensuring even pre-aligned layers remain precisely squared during movement. Cutting machine Polar 137 XT-AT with touch control And Autotrim function for automatic waste removal under the front table during cutting - Lowerable side gauge left (required for rear-table loading); also allows handling of formats with a diagonal of...

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, working width: 3,000 mm, overall weight: 5,000 kg, input voltage: 380 V, Equipment: documentation/manual, Celaschi TSA300DS double-blade squaring saw Mobile shoulder opening 3000 mm, controlled via touchscreen Minimum working width 200 mm 5+5 motor groups Slider width 65 mm Feed rollers with 400 mm pitch Kodpfx Aiezfvtnoiedr Pneumatic activation of the cutter block Automatic activation controlled by CNC Adjustable feed speed (m/min): 4-24

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Industrial steak cutter Fully functional Year of manufacture: 2006 Adjustable rollers or knives All stainless steel Kedsynwk Iopfx Aiiedr Perfect for: steaks and chicken products

Condition: new, Year of construction: 2024, The PLANTER 610 jointer/thicknesser is equipped with a digital drive for adjusting the height of the thicknesser table, allowing for precise adjustment with 10 programmable positions. Key benefits: - No switching between functions – immediate transition between jointing and thicknessing. Kdedpfx Aijzrgr Ueior - Advanced digital control – easy adjustment of the thicknesser table height for repeatable and accurate results. - Powerful 10 HP motor (model 610). - High blade speed – 5000 revolutions per minute for clean and smooth cuts. - Efficient chip extraction system – 150 mm outlet diameter for dust extraction. - Stable work surface – the thicknesser table with dimensions of 630 x 1600 mm provides optimal support during processing. - Variable feed rate of 8–18 m/min – adjustable feed speed for complete control over the processing. - Efficient thicknessing system – the table with two rollers (0–0.5 mm) ensures smooth material feed. - Rubber discharge roller – ensures even discharge of the workpiece without surface damage. With its robust design, advanced technology, and ease of use, the PLANTER 610 is the ideal choice for professional woodworking shops that require precision, speed, and reliability in wood processing. Technical specifications: Jointer: - Working width 630 mm - Total length of jointer tables 2500 mm - High-speed cutter head (5000 rpm) - Jointer weight (0–45°) - Motor power – 10 HP - 150 mm diameter dust extraction connection Thicknesser: - Working width 630 mm - Thicknesser table dimensions 630 x 1600 mm - Variable feed rate 8–18 m/min - Minimum processing height 5 mm - Maximum processing height 250 mm - Table with two rollers - Electronic table height adjustment - Rubber discharge roller

Condition: good (used), Heidelberg Cylinder SBD 64×89 Automatic Die Cutter Kedpfx Ajzvgk Ejiiodr The most sought-after machine on the market, in its late 2000s. The machine is in very good condition and ready for operation. Format: 640x890mm The machine is ready for die cutting. Fully automatic, with smooth speed control, central lubrication, and safety guards. The machine features a quick-change carriage system on the infeed and a convenient cabinet on the side of the machine. Includes two frames, spare parts, a cylinder plate, carriages, and a large set of fillers and locks.

Condition: excellent (used), HOLZ-HER Auriga 1308 XL edge banding machine - used PC control with screen, Touchscreen, Swiveling control panel, Program memory, Automatic adjustment of pressure beams, Feed via transport chain, Workpiece support can be extended, Diamond flush trimming cutter in both forward and reverse rotation, Strip magazine, Ksdpey T D N Aofx Aiiodr Standby function, Glu Jet cartridge system, Cartridge system with sensing nozzle, Use of PUR adhesives possible, Gluing unit with driven roller, Pneumatic control of the gluing unit, Miter saw with 2 high-frequency motors, Miter saw pneumatically swiveling, Flush/radius milling unit, Motorized positioning control for milling unit, Milling tools with diamond coating, Air nozzle on the milling unit, Corner copying unit with diamond-coated cutter, Radius draw blade with motorized positioning, Air nozzle on the radius draw blade, Process-controlled surface draw blade, Air nozzle on the surface draw blade, Spray device for release agents, Spray device for cleaning agents, Edge trimming unit ----- Technical data ----- Edge thickness, roll material: 3 mm, Edge thickness, strip material: 5 mm, Workpiece thickness: 60 mm, Min. workpiece length: 160 mm, Feed speed: 10 m/min, Distance workpiece support: 480 mm, Support plate Ø for edge material: 800 mm, Cutting blade for roll material up to: 3 mm, Heating time: 3.5 min, Power of flush trimming cutter: 0.8/1.2 kW, Power of miter saw: 2x0.45 kW, Power of milling station: 2x0.65 kW, Power of corner copying: 0.3 kW, Power of edge trimming: 2x0.09 kW, Extraction port Ø flush trimming unit: 2x80 mm, Extraction port Ø miter saw: 2x70 mm, Extraction port Ø milling unit: 100 mm, Extraction port Ø draw blade unit: 120 mm, Compressed air connection: 6 bar, Overall length: 5,000 mm, Dimensions (LxWxH): 5,000x1,250x1,720 mm, Weight: 1,300 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications - New heater - Cartridge system checked for leaks - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatics checked - Ready for immediate use

Condition: excellent (used), Year of construction: 2007, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 1541, total width: 2,000 mm, total height: 2,500 mm, total length: 30,000 mm, briquette diameter: 90 mm, overall weight: 6,000 kg, Equipment: CE marking, type plate available, Complete production line for cylindrical briquettes, Ø 90 mm. The line includes a Di Più BRIK MB90 briquetting press, an input sawdust conveyor, a briquette cooling tower, a briquette cutter, a briquette sorting conveyor, a shrinking tunnel (packaging machine), and an output roller conveyor. Kodpfxsy U D Uuj Aiiodr

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, Ultra-high productivity cutting line comprising: * POLAR 137 X Paper Cutter, year 2005 Kdedsyzxlhjpfx Aiior Usable working width: 137 cm. 2 HSS blades, stainless steel air table 80x100 cm with lateral air tables, connected to the Jogger and Discharge System * POLAR RA 4 Jogger, year 2005 with air-removal roller and safety barriers * Automatic discharge system (palletizer) model Polar TR130ER-4 RIGHT, year 2005 * Pile Lifter Polar LW 1000/4, year 2005 Line installed and ready for any test. Technical and aesthetic condition like new. Ready for immediate delivery.

Condition: used, Year of construction: 1990, with Tersa cutter shaft Machine in working order completely set up used good condition cleaned functionality tested partially refurbished Manufacturer: Martin Type: T43 Year of manufacture: 1990 Machine no.: V 177666 GS-tested GS-tested for wood dust Segmented pressure beam Rubber feed roller Rubber extraction roller Feed rate m/min: 6 9 12 18 m/min Number of cutters: 4 automatic motor brake Tersa reversible cutters Digital display for planing height electric height adjustment with tip fine adjustment Motor kW: 5.5 Planing width approx. mm: 630 Planing height approx. mm: 250 Dust extraction connection mm: 160 Space requirement approx. L x W x H mm: 1200x1250x1200 mm Weight approx. kg: 1000 Location: 97447 Gerolzhofen, free loading, unpacked Handover in current condition as inspected, Kjdpszg Nl Tjfx Aiisdr without warranty

Condition: excellent (used), Raw material water receiving tank Destoner Bin tipper with conveyor Bin washing system Safety railings Belt conveyor with carriers, 27 units Flat conveyor, 38 units Drum washer Platform Inspection table Vibrating sorter, 2 units Roller inspection table Kdodpfx Aiex Uqq Aoijr Hydrocooler Control panel Roller size grader Buffer tanks, 9 units Sormac carrot cutter, 3 units Bin stacker Screw conveyor Platform with stairs Option to sell selected machines. Machines are made of acid-resistant stainless steel. Prices are set per individual machine. Please check my other listings.

Condition: used, Year of construction: 1979, functionality: fully functional, thread length: 77 mm, overall weight: 2,268 kg, workpiece diameter (max.): 8 mm, type of input current: AC, Vibratory Bowl Variable Speed Pulley Ksdpfx Ajztr Nuoiijdr Used #10 Dies

Condition: ready for operation (used), Year of construction: 2006, MBO folding machine T800.16, built in 2006 Round pile feeder R800 1st station T800.1 with 6 pockets Preparation for glue Segmented rollers Transfer table Kodevyaqkopfx Aiijdr 2nd station T68-4 with 4 pockets Cutter shaft cassette Transfer table 3rd station T56-4 with 4 pockets Cutter shaft cassette RFE turning unit Horizontal delivery FA 66 ME Optional: HHS cold glue device X-Trend, built in 2006 4 channels 1 glue head

Condition: used, Year of construction: 2013, Number of spindles 5 St. Working width 20 - 230 mm Working height 8 - 120 mm Length of the planing table 2500 mm Feed motor 1,1 kW Feed speed stufenlos regelbar 2-12 m/min. weight of the machine ca. 2500 kg Control MemoryPlus 1 WEINIG VARIOMAT Planing and Moulding Machine ----- Brief Summary: ----- - 5 spindles - Powerful motors - Cycle-controlled jointing - MemoryPlus control system - Option: Stähle-Hess Saturn single-piece sanding machine Technical Manufacturer's Description: ----- Working width: 20 – 230 mm Working height: 8 – 120 mm 1st Spindle: Horizontal Bottom ----- Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125 – 145 mm Axial adjustment range: 5 mm Rebating device incl. rebating cutters 2nd Spindle: Vertical Right ----- Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 93 – 232 mm Minimum tool diameter at fence level: 93 mm Maximum tool diameter behind fence level: 180 mm Maximum moulding depth: 45 mm Axial adjustment range: 30 mm Insert segment incl. additional fence lip: 125 mm Insert segment incl. additional fence lip: 150 mm 3rd Spindle: Vertical Left ----- Shared motor with 1st right spindle Diameter: 40 mm Shared speed with right spindle Tool cutting circle: 93 – 232 mm Maximum moulding depth: 45 mm Minimum moulding depth at 200 mm tool cutting circle: 20 mm Axial adjustment range below table: 30 mm Insert segment: 125 mm Insert segment: 150 mm 4th Spindle: Horizontal Top ----- Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125–200 mm Maximum rebate depth: 30 mm Minimum rebate depth (for tool cutting circle up to 200 mm): 20 mm Axial adjustment travel: 30 mm 5. Horizontal Bottom Spindle Kodpfxoy Spvfs Aiisdr ----- Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125–200 mm Maximum rebate depth: 15 mm Axial adjustment travel: 10 mm Table plates with wooden inserts for the bottom spindle Additional outfeed plate above the bottom spindle for wooden inserts Feed System ----- Frequency-controlled feed: 1.1 kW, infinitely variable (2–12 m/min) Double-pendulum roller opposite the left spindle Axial adjustment travel of feed rollers opposite the left spindle: 35 mm Durofer-coated spiked feed rollers Pneumatic pressure for feed rollers (incl. water separator) Cycle-controlled jointing to support manual jointing. The infeed roller is released once the second feed roller has engaged the workpiece. After the workpiece clears the second feed roller, the infeed roller returns to its starting position for the next workpiece. Additional Features: ----- MemorPLUS Control System Width and height adjustment via controls (Spindles 3 and 4: radial CNC-axis controlled) ----- Price for the above-mentioned machine available upon request! ----- OPTIONAL ADD-ON (at extra cost) — Stähle-Hess Saturn #7008: Machine previously used in conjunction with the Stähle-Hess Saturn Duo Single-P...

Condition: like new (used), Year of construction: 2022, functionality: fully functional, total width: 2,450 mm, total height: 400 mm, total length: 4,000 mm, conveying length: 4,000 mm, construction width: 2,550 mm, We had this roller conveyor on our Solarco Boxmaker 25 DDC-DD. For the most part, we didn't use this conveyor. It transported pallets cleanly. Kodpfx Asy Tixveiiedr If you are interested, please contact me.

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with joint milling unit including DIA tools, joint thickness up to 40 mm, workpiece thickness up to 3 mm, combined milling station, radius R 2.5 mm. Technical description: with hot melt adhesive application to the workpiece for edge material up to 3 mm. 60 mm workpiece thickness without joint unit, 40 mm workpiece thickness with joint unit, maintenance-free, coated adhesive reservoir, HF trimming station (16,000 rpm) for front and rear edge overhang, HF milling station (16,000 rpm) with replaceable blade milling cutter (combined design) and fine milling adjustment from the operator side, free spaces for additional processing units (Hebrock system), feed rate approx. 10 m/min, cutting depth adjustment of the trimming saw, signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel, double roller pressure beam, unit viewing windows from the rear and operator side of the machine, PLC control including touchscreen. Kdjdpfx Aisx S Hmzjier Technical data: - Feed speed 10 m/min. - Board thicknesses from 8 - 40 mm - Weight: depending on the equipment, approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm Airtronic incl. cooling and antistatic spraying device 2014, 1 unit Hot air unit for creating an optical zero joint using special edge materials designed for this purpose. - including pneumatic adhesive reservoir positioning - including cooling and antistatic spraying device - including 2 additional edge channels in quick-change design - including special version corner rounding milling cutter, maximum workpiece thickness 60 mm and minimum workpiece length 200 mm - exclusively for Hebrock edge banding machines of the 3000 series - retrofitting possible later - additional costs upon request Technical data: - max. board thickness 40 mm - max. edge thickness 1.2 - 2.0 mm - 7 - 10 m/min feed speed - Air consumption approx. 280 - 580 l/min (only Airtronic), electronically controlled - ready for operation after approx. 2 min Upgrade to 8 mm edge thickness, 1 unit, up to a maximum of 40 mm workpiece thickness including pneumatic saw adjustment special version, minimum workpiece thickness 8 mm, 1 unit 3-point pneumatic milling adjustment, 1 unit Switching between radius - chamfer - flush for the combined milling stations. This eliminates the manual adjustment at the combined milling station for the 3rd stop point. PLC control is essential. Cleaning station (wiper), 1 unit Corner rounding milling cutter, 1 unit, including combined tool and pneumatic adjustment for chamfer/radius, maximum workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm. Radius pull blade, 1 unit, including pneumatic feed device, radius R 2.0 mm. Flat pull blade, 1 unit, with pneumatic feed control. Chassis complete, 1 unit Adhesive station change system including adhesive outlet device downwards, in preparation, 1 unit, without 2nd adhesive reservoir. - including the possibility of processing PU adhesive with the machine Dado cutter unit, vertical, in the board, 1 unit, including pneumatic feed device. Vertical dado, groove width 8.2 mm, groove depth 8.0 mm, distance from the workpiece edge 14.0 mm Special version, dado cutter motor with higher motor power, 1 unit Internal extraction of the joint unit, 1 unit, at the extraction manifold of the machine Ball bearing for corner rounding milling cutter 24.1 mm, 1 unit Ball bearing for corner rounding milling cutter 24.2 mm, 1 unit Release agent spraying dev

Condition: used, Year of construction: 2005, functionality: fully functional, overall weight: 1,600 kg, working range: 140 mm, type of input current: three-phase, input voltage: 400 V, - Polish production - year of production 2005 - DTR, CE TECHNICAL DATA: - range of diameters of processed dowels: 40-140mm - max. diameter of input material: 200mm - min. length of input material: 600mm - max. allowance for processing per side: 30mm Kdedpov N Ebajfx Aiisr - cutter head drive motor: 18.5kW - forward/reverse feed - feed motor: 1.5kW - 3 toothed pulling rollers - head: 4-knife - 3 smooth pulling output rollers - dimensions length/width/height: 2630x1240x1400mm - weight: 1600kg

Condition: good (used), Gravity Flexi Roller Conveyors in Stock 3 Conveyors available Dimensions Conveyor 1, 3240mm closed x 560mm wide double plastic rollers, height 680mm fully adjustable Conveyor 2, 750mm closed - 2160mm fully open x 500mm wide steel rollers, height 8000mm fully adjustable Conveyor 3, 1350mm closed - 4500mm fully open x 500mm wide plastic rollers, height 770mm fully adjustable Kdjdoyr Nuaopfx Aiisr

Condition: new, Year of construction: 2026, CORMAK TH410S Thickness Planer with Spiral Cutter Head The CORMAK TH410S thickness planer with a spiral cutter head is an advanced woodworking machine designed for professional users who require maximum precision, durability, and operating comfort. The spiral cutter head equipped with 72 replaceable carbide inserts provides exceptional surface quality, significantly quieter operation, and lower consumable wear compared to traditional straight knife cutter heads. Main advantages of the CORMAK TH410S thickness planer with spiral cutter head Spiral cutter head with 72 inserts – ensures smooth cutting, reduces vibration and noise by up to 50%, and provides significantly longer service life compared to conventional straight knives. Replaceable carbide inserts – individual segments can be rotated or replaced when worn or damaged, reducing operating costs. Ground cast iron table – provides optimal material sliding and stable workpiece guidance. Three feed speeds – allows adjustment of the processing speed according to the type of wood and production requirements. Digital height indicator – enables precise thickness adjustment with accuracy up to 0.1 mm thanks to the indicator mounted on the handwheel. Chain drive system – ensures smooth and precise material feeding through the machining zone. Advanced safety features – compliance with occupational health and safety requirements and technical documentation standards ensures safe operation. Design and technology The CORMAK TH410S thickness planer is based on a robust steel and cast iron construction, providing high rigidity and resistance to vibration. The 95 mm diameter spiral cutter head is equipped with 72 carbide inserts arranged in a spiral pattern, ensuring continuous cutting and eliminating the risk of tearing wood fibres, even when processing hard and resinous wood species. The extraction and sound-insulating cover provides quick access to the cutter head and simplifies maintenance operations. Precision and working efficiency With a planing range from 5 to 230 mm and a working width of 410 mm, the machine enables processing of both thin boards and thick structural elements. The cutter head speed of 4050 rpm and powerful 3.0 kW (S1) motor ensure high performance even during intensive operation. The use of a spiral cutter head allows achieving a high-quality surface finish without the need for additional sanding, significantly reducing preparation time before further processing. Standard equipment Spiral cutter head with 72 carbide inserts Digital thickness adjustment indicator Feed drive with chain transmission Extended table with support rollers Sound-insulated dust extraction cover Complete safety guards compliant with technical documentation and workplace safety standards Technical specifications Parameter Value Thickness planing width 410 mm Thickness adjustment range 5–230 mm Planer shaft diameter 95 mm Number of knives (spiral inserts) 72 pcs Planer shaft speed 4050 rpm Feed speed 6 m/min Dust extraction connection Ø100 mm Motor power 4.2 kW Motor power S1 100% duty 3.0 kW Voltage 400 V Kjdpfxex Dlp Ao Aiiodr Extraction outlet diameter 100 mm Gross weight 263 kg Dimensions Parameter Value Width 1110 mm Depth 710 mm Height 1020 mm Table size – width 930 mm Table size – depth 410 mm

Year of construction: 2001, operating hours: 27,400 h, condition: good (used), functionality: fully functional, Die-cutting machine with stripping station, foundation tilting table (third-party manufacturer), tilting table/preparation table, waste stripper, electronic double-sheet detection, pull marks BS + AS, machine height increased by 300 mm, 1 die-cutting frame, various stripping frames and stripping pins (including cart), quick centering device for sheet stacks, manual non-stop feed, manual non-stop delivery, price ex works, dismantling and loading can be arranged for an additional charge! Video available upon request! In May 2026, a PLATEN CONDITIONING was carried out by BOBST on the die-cutting machine. All deposits were removed from the upper and lower tables, and the die was polished. The sector was opened and assessed as being in "like-new" condition. Photos, video, or invoice available upon request! Kjdpfxjzmyfdj Aiiodr Note: The platform must be adapted by the buyer! Longitudinal handrail missing! Technical main data: Maximum sheet size: 720 × 1020 mm, Minimum sheet size: 350 × 400 mm, Maximum die-cutting force: 250 tons (2.5 MN), Maximum production speed: 7,500 sheets per hour, Processable materials: Paper / solid board: from 80 g/m² up to 2000 g/m², corrugated board: up to 4.0 mm thick Dimensions and weight: Machine length: approx. 6,000 mm Machine width: approx. 2,000 mm Machine height: approx. 2,500 mm Total weight: approx. 19,500 kg Features of the Series II: C.U.B.E. system: Electronic Bobst machine control system Centerline system: Micrometric adjustment for fast set-up times and precise tool alignment Stripping station: Integrated double-round stripping unit for waste removal Non-stop system: Continuous sheet feeding and delivery Ultrasonic double-sheet detection

Year of construction: 2025, condition: ready for operation (used), functionality: fully functional, Designed to perform high-precision slotting and die-cutting processes on cardboard sheets. Its semi-automatic system allows for a high degree of operator control. With a working length of 2800 mm, it is suitable for handling large parts, optimizing the manufacturing process of boxes and packaging. Kedpfx Aiozugtqeiedr Configuration: - Conveyor chain for indirect paper feeding - 40 mm lateral movement via gear transmission; replaceable and wear-resistant polyurethane rubber - Rollers with surface grinding, chrome plating, and precise alignment. Shaft cores made of 20# steel.

Condition: excellent (used), Year of construction: 2007, We offer the STORK TOWNSEND BBC-1500 W Back Bone Cutter, an automatic machine for the precise separation of spare ribs from the split backbone. This is an efficient solution for meat processing plants that want to increase yield, improve cut quality, and reduce the risk of bone splinters. The BBC1500W ensures a clean cut, higher yield compared to traditional band saws, and high-quality finished products. The machine is designed to process pork, veal, and beef backbones of various sizes. Thanks to the manually adjustable feed mechanism and the feed roller system, the backbone is guided stably to the horizontal band saw, allowing for cutting very close to the backbone and yielding more valuable product. An additional advantage is the thin, high-speed cutting band, which makes clean cuts without contaminating the meat with bone fragments or splinters. Ksdozaaqbepfx Aiiedr The BBC1500W is a safe and user-friendly machine; it features a fully enclosed saw, ensuring low noise levels, low maintenance costs, simple assembly and disassembly, and easy cleaning. These are important advantages for facilities that require reliable operation and quick hygiene maintenance in daily production. The machine’s average output is 1,200–1,350 pieces per hour, with a maximum of approximately 1,500 pieces per hour. The cut ribs can then be conveyed to a receiving belt for packaging or further processing. It is also possible to produce other products, such as button ribs and pork bone-in loin. Technical specifications: Manufacturer: STORK TOWNSEND B.V / Marel Model: BBC-1500 W Year of manufacture: 2007 Power supply: 400 V Phases / frequency: 3 / 50 Hz Installed power: 1.6 kW Weight: 250 kg Length: 2000 mm Width: 1274 mm Width with conveyor: 1613 mm Height: 1505 mm Noise level: 75 dB(A) Power according to brochure: 1.8 kW. Key advantages of the BBC1500W automatic cutting of ribs from the back, clean cut without bone fragments, higher yield than with a conventional band saw, capable of processing pork, veal, and beef spines, safe, fully enclosed design, low noise level, easy cleaning and low operating costs, potential for further yield improvement through integration with meat recovery systems.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, GÜNTHER GTP 600 MC2 | Combined roller steak tenderizer and meat press (strip tenderizer) Kdsdpfx Aszu Axceiior Manufacturer: Günther Maschinenbau GmbH Model / Type: GTP 600 MC2 Serial number: 34477 Year of manufacture: 2015 Power supply: 400 V / 50 Hz / 16 A Power: 4.5 kW Overall dimensions: 2250 x 2050 x 2050 mm Working width: 570 mm Belt width: 595 mm (plastic) Pneumatic parameters: working pressure 6 bar, air consumption 100 l/min The GÜNTHER GTP 600 MC2 is an advanced, industrial machine that combines the functions of a roller steak tenderizer and a pneumatic meat press in a single processing step. The machine is designed for professional meat processing plants, butcher shops, and production lines for cooked and cured meat products. Combining surface scoring with mechanical pressure significantly increases the active surface area for brine absorption, improves protein release, and ensures excellent binding and consistency of the product after heat treatment. The unit is factory-equipped for operation in continuous processing lines, including directly after automatic brine injection machines. The scoring rollers and pneumatically controlled pressing roller automatically adjust their clearance to the thickness of the meat piece being processed (pork, beef, or poultry). This ensures a repeatable processing cycle without damaging the fiber structure, which translates into higher slicing efficiency and an aesthetically pleasing appearance of the finished product’s cross-section.

Condition: not inspected (used), functionality: unexamined, Lot of machinery for making cable drums Some of the machines in the batch: Small Coil Line Kjdpfxothqqbo Aiiodr Claramunt Small Coil Nailer Cutter Template Table Large Nailer Rollers Large Fere Nailer Large Edge Trimmer Large Cable Outlet Machine

Condition: used, Year of construction: 1954, functionality: fully functional, machine/vehicle number: 541000, total height: 1,700 mm, total length: 1,200 mm, total width: 1,200 mm, overall weight: 815 kg, table length: 700 mm, table width: 70 mm, disc diameter: 150 mm, - Year of manufacture: 1954 - Fully functional, powered, ready for demonstration - Grinding wheels Ø150 mm - Cross travel: 300 mm - Longitudinal travel: 450 mm - Table size: 700 x 70 mm / tiltable - Grinding spindle tiltable in Z, X, Y axes - Machine dimensions: 1700 x 1200 x 1200 mm - Weight: 815 kg Kdedpfsxnimtjx Aiijr - Factory No.: 541000 Accessories: - Swiveling dividing head - Swiveling vice - 2x dressing diamonds - Grinding wheel holders - Approx. 15 diamond/CBN grinding wheels - Various grinding wheels - Collets Ø1 – Ø20 mm