Used Sbz 130 for sale (4,306)

Condition: good (used), Manufacturer: Thyssen / Krupp Type: KHP 130 /125 Electrical Motor: Included (200 kW) Rotor diameter: 1.300mm Rotor width: 1.250mm Inlet: 1.370 x 990mm See PDF-file below for more detailed information. Hedsg I R Rujpfx Af Ajfk Included: – Inlet – Hydraulic system to open New spare-parts in stock.

Condition: excellent (used), functionality: fully functional, mileage: 58,000 km, first registration: 05/2003, fuel type: diesel, overall weight: 11,500 kg, axle configuration: 4x2, wheelbase: 3,105 mm, fuel: diesel, brakes: engine braking, emission class: euro3, total length: 6,220 mm, Year of construction: 2003, Equipment: air conditioning, full service history, Iveco Eurocargo 130 E 18 Multi-container hooklift system Year: 05/2003 2 axles (4x2) Euro 3 Diesel Manual transmission Engine displacement: 5,880 cc (6 cylinders) Power: 134 kW (182 hp) Wheelbase: 3,105 mm Total truck length: 6,220 mm Payload: 4,850 kg Gross Vehicle Weight: 11,500 kg Air conditioning ABS Electric mirrors and windows Radio Mileage: 58,000 km DESCRIPTION: Iveco Eurocargo 130 E 18 Multi-bucket skip loader system Year: 05/2003 2 axles (4x2) Euro 3 Diesel Manual transmission Engine displacement: 5,880 cc (6 cylinders) Power: 134 kW (182 hp) Wheelbase: 3,105 mm Total truck length: 6,220 mm Payload: 4,850 kg Gross Vehicle Weight: 11,500 kg Air conditioning Hodpozru Tyofx Af Asfk ABS Electric mirrors and windows Radio Mileage: 58,000 km

Condition: used, mileage: 43,230 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,750 mm, first registration: 07/2024, fuel tank capacity: 80 l, CO₂ emissions: 250 g/km, emission class: euro6, color: white, number of seats: 3, Year of construction: 2024, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking sensors, sliding door, = Additional Options and Accessories = - Front and rear parking sensors - Sliding door on the right side - Automatic headlights - Heated exterior mirrors - Passenger airbag - Bluetooth - Electric front windows - Electrically adjustable exterior mirrors - Euro 6 - Driver airbag - Remote central locking - Rear doors - Height-adjustable driver's seat - Height-adjustable steering wheel - Collision mitigation by braking - Leather steering wheel - Lumbar support - Multifunctional steering wheel - Fog lights - Radio - Radio with DAB - Rain sensor - Start/Stop system - Immobilizer - Connected services - Windshield heating - Partition = Additional Information = General Information Number of doors: 5 Model range: May 2019 - July 2023 Cab: single Technical Information Torque: 360 Nm Number of cylinders: 4 Engine displacement: 1,995 cc Transmission: 6 gears, automatic Top speed: 157 km/h Dimensions Length/Height: L3H2 Dimensions (L x W x H): 598 x 206 x 255 cm Weights Unladen weight: 2,118 kg Payload: 1,382 kg Hfsdpjzp Npqefx Af Aok GVWR: 3,500 kg Max. towing capacity: 1,700 kg (unbraked 750 kg) Interior Interior: black Consumption Average fuel consumption: 8.9 l/100km Maintenance, History and Condition APK (Technical Inspection): valid until 07.2027 Number of keys: 2 (2 remote controls) Product Safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: used, mileage: 206,000 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,000 kg, first registration: 04/2016, next inspection (TÜV): 02/2027, emission class: euro6, color: white, number of seats: 9, Year of construction: 2015, total length: 4,963 mm, total width: 2,050 mm, total height: 2,254 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, 2nd owner since 2018. German minibus. Only original 206,000 km. TÜV (roadworthiness certificate) valid until 02/2027. In 2025, €2,000 were invested in this Citroen Jumper, including: - Rear brakes NEW, parking brake partially new - Rear tyres NEW (all-season tyres) - Front tyres as-new (all-season tyres, DOT 17/2024) Last service in November 2024. Auxiliary heater (functions well). Air conditioning. 9 seats. Hodsv I Idbjpfx Af Asfk Radio system. Central locking with remote key. ABS. ESP. Electric windows and exterior mirrors. Unladen weight: "2025-2293 kg" as per vehicle registration certificate. Gross vehicle weight rating: 3,000 kg. Standard registration as "vehicle for passenger transport up to 8 seats / multi-purpose vehicle". Original COC (Certificate of Conformity) document available. Euro 6 emissions standard. 6-speed manual gearbox. The Citroen drives powerfully and very well. This offer is valid only for businesses, freelancers, farmers, forestry operations, and comparable legal entities. Sale to purely private individuals is strictly excluded. Subject to prior sale and errors at any time. Net price: €10,500. For export, we reserve the right to initially retain a deposit equal to the statutory 19% VAT until receipt of the final export confirmation (the export document or confirmation of arrival).

Condition: used, Year of construction: 2014, Used Machine Year of manufacture: 2014 Condition: The machine has been factory-overhauled by Ganner Features and Technical Specifications: Complete standard configuration including: - Support with linear guide consisting of: 1 single-spindle horizontal drilling unit, 0.65 kW motor, 70 mm stroke Tool speed selectable via operator software (3000/5000/8000 rpm) 1 blow-out, gluing, and dowel-driving station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC-controlled, with working length 1300 mm, travel speed max. 105 m/min. - Z-axis manually adjustable via mechanical digital counter, position adjustable via support table 5–40 mm - Dowel drive-in overhang adjustable from 7–20 mm via a mechanical digital counter; drilling depth from 0–35 mm (for drill bit length GL 70 mm) is automatically adjusted with the drive-in overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GLUE/WATER selector switch for flushing the glue system, each with: 1 stainless steel tank for 7.5 kg of glue and 7.5 l of water - Indicator light showing remaining glue levels in the glue tank - 1 left side stop, 1 right side stop, and 1 center stop (all removable) - 4 start buttons for individual processing of 1–4 workpieces - 4 pneumatic 10° angle clamping cylinders for workpiece thicknesses up to 80 mm, workpiece length (Y) min. 70 mm - 1 extraction funnel, connection Ø 80 mm - 1 TCT control unit with: Built-in industrial PC, including Beckhoff TWINCAT soft PLC, operating temperature range 0–50°C, 15-inch capacitive TFT industrial touchscreen, operating system: WINDOWS 7 - Programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensions, automatic workpiece mirroring and operation optimization, 4 work areas assignable to different programs, graphical workpiece display, parametric programming, zero-point offset, programmable worklists, error diagnosis with plain text Optional equipment: - 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 1 Z-axis with NC-controlled, dynamic positioning for height adjustment of the drilling and dowel-driving station (programmable from 5–40 mm), travel speed max. 30 mm/sec. - 1 single-spindle vertical drilling unit drilling from the TOP, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via a mechanical digital counter from 5–40 mm, drilling depth (Z) max. 30 mm (with drill bit length GL 57 mm), Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (including drilling depth compensation, e.g., for Häfele Minifix) - 4 vertical 10° angle clamping cylinders with mount Hfjdpfx Aszlbrvjf Ajk - 1 keypad with mount Availability: available shortly Location: DE-63934 Röllbach

Condition: ready for operation (used), Year of construction: 1978, travel distance X-axis: 8,300 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 500 mm, Floor boring machine WMW Union BFP 130/5 X-axis: 8300mm Y-axis: 2500mm Z-axis: 500mm W-axis: 900mm Spindle diameter: 130mm Spindle taper: ISO 50 Rotary table: 2000x1800 2 x floor plates: 3500x1750 Year of manufacture: 1978 Milling head Tailstock DRO Heidenhain Spindle stabilizer Hodpfx Aszt Iqbsf Aofk Boring bar Many accessories ✅ Excellent working condition Total weight: 53 tones

Condition: refurbished (used), Year of construction: 2007, VIDEOS AVAILABLE ON REQUEST UNION CBFK 130/2 CNC Table Type Horizontal Boring & Milling Machine Manufacturer: UNION Gera (VEB Werkzeugmaschinenfabrik UNION Gera) Model: CBFK 130/2 Control: Heidenhain CNC Machine type: CNC Table Type Horizontal Boring & Milling Machine Travels X-axis: 3,000 mm Y-axis: 1,600 mm Z-axis: 1,275 mm W-axis (spindle quill): 400 mm B-axis (rotary table): 360° Table Table size: 1,600 × 2,000 mm Maximum workpiece weight: 7,000 kg Main Drive Main spindle motor: 32.4 kW Electrical Data Connected load: 80 kW Supply voltage: 380 V Frequency: 50 Hz Control voltage: 220/24 V Hfsdpszqbg Dofx Af Ask Auxiliary voltage: 220/15 V Rated machine current: 150 A Recommended fuse: 200 A Operating temperature: 15–35 °C Machine Weight Approximate machine weight: 28.3 tonnes Year Originally manufactured: (not shown on plate) General overhaul: 2007 Machine Identification Model: CBFK 130/2 Serial number: 12266 Operating Hours (Heidenhain) Control ON: 112,694 h Machine ON: 100,869 h Program running time: 22,209 h Spindle running time: 18,280 h

Condition: used, The Kilia Angle Grinder 130 is a professional industrial meat grinder designed for continuous operation in meat processing plants and food production facilities. Featuring a 130 mm throat diameter and a powerful 17 kW drive, it delivers efficient grinding of fresh and slightly frozen meat while maintaining excellent product quality. Its stainless steel construction ensures durability, easy cleaning and high hygienic standards. Technical Specifications Manufacturer: Kilia Model: Angle Grinder 130 Type: Industrial Meat Grinder (Angle Grinder) Throat Diameter: 130 mm Material: Stainless Steel Power Supply: 400 V / 50 Hz / 3N Hfsdpfszn I Suox Af Ask Installed Power: 17 kW Dimensions (L × W × H): 1100 × 1000 × 1500 mm

Condition: like new (used), operating hours: 1,430 h, Sausage filling machine, piston filling machine Rex Type RKF 130 for filling/portioning & cutting, completely made of stainless steel. Condition: Like new. Hodpfx Afjzqup Sj Aofk

Condition: used, mileage: 120,256 km, power: 96 kW (130.52 HP), first registration: 04/2022, fuel type: diesel, axle configuration: 4x2, wheelbase: 2,930 mm, fuel: diesel, CO₂ emissions: 205 g/km, fuel tank capacity: 80 l, color: blue, gearing type: automatic, number of gears: 6, emission class: euro6, number of seats: 3, total length: 5,120 mm, total width: 2,030 mm, total height: 1,970 mm, Year of construction: 2022, Equipment: ABS, Android Auto, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, full service history, hill-start assist, navigation system, onboard computer, power assisted steering, power mirror, sliding door, start-stop system, traction control, trailer coupling, = Additional Options and Accessories = - Rear parking sensors - Front parking sensors - Sliding door, right side - Automatic headlights - Exterior mirrors in body color - Heated exterior mirrors - Electric front windows - Electrically foldable exterior mirrors - Electrically adjustable exterior mirrors - Electronic brake force distribution - Euro 6 - Driver airbag - Remote central locking - Cruise control - Height-adjustable driver's seat - Height-adjustable steering wheel - LED daytime running lights - Leather steering wheel - Lumbar support - Front center armrest - Multifunctional steering wheel - Multimedia compatible - Fog lights - Emergency brake assist - Radio - Radio with DAB - Sliding door, left side - Lane keeping assist - Immobilizer - Bumpers in body color - Connected services - Rear traffic alert - WiFi hotspot - Heated windshield - Partition = Additional Information = General Information Number of doors: 5 Model range: May 2019 - July 2023 Cabin: simple Technical Information Torque: 385 Nm Number of cylinders: 4 Engine displacement: 1,995 cc Dimensions Length/Height: L1H1 Weights Unladen weight: 1,986 kg Payload: 814 kg GVWR: 2,800 kg Interior Interior: black Consumption Average fuel consumption: 7.1 l/100km Fuel consumption in urban areas: 7.3 l/100km Fuel consumption outside urban areas: 5.9 l/100km Maintenance, History and Condition Number of owners: 2 APK (Technical Inspection): valid until 07.2027 Number of keys: 2 (2 remote controls) Product Safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL Hfodoy Ui Aqepfx Af Ask

Condition: new, Elektror HRD 2 FU-130/7.5 high-pressure blower, serial number: 212/864490, with ATB VAF 100L/2C-11S motor, unused, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request the costs for packaging and shipping separately! Hfsdpfx Afezkc Tle Aek

Condition: used, mileage: 278,000 km, power: 103 kW (140.04 HP), first registration: 09/2017, fuel type: diesel, fuel: diesel, color: other, gearing type: mechanical, emission class: euro6, Year of construction: 2017, Equipment: ABS, = Additional options and accessories = - Immobilizer - Radio - Schuifdeur rechts = Remarks = Mercedes Sprinter 314, 2017, 278,000 km Euro 6, Manual transmission, Versalift ETL-32-130, 12.8 meters working height Hfsdpjzgub Hofx Af Ask = More information = GVW: 3.500 kg Make of bodywork: Versalift = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: used, Vötsch Type: NTUD 125/130/125 Hedpfx Afey H Akrj Ajfk Pass-through oven Last maintenance: 3.12.25 Temperature control in 3 zones: Control of the internal temperature via an electronic temperature control system, divided into 3 separate temperature zones and controlled by semiconductor switching devices. This ensures good temperature uniformity whether operating in fresh or recirculated air mode. Temperature program control: The CTC control system is operated via a dialog PC with TSI software for the heating control of each temperature zone, as well as the activation of the recirculation fans and damper control. Horizontal airflow with reversal: By switching the electronically or pneumatically actuated dampers, the airflow direction can be set from left to right or right to left. The airflow direction for each of the 3 zones can be independently adjusted. Vertical airflow: By shifting a cover plate in the oven ceiling. Useful floor area: The floor area can be driven on using customer-provided loading trolleys. Recirculation fans: Each zone is equipped with a radial fan. Usable space dimensions: 1300 mm height / 1250 mm width / 1250 mm depth External dimensions: 2490 mm height / 1770 mm width / 1810 mm depth Volume: 2000 liters Connection rating: 400V(N)PE AC 50/60 Hz 22 kVA Rated current: 32 A Power: 18 kW Nominal temperature: 50 to 150°C Weight: 1000 kg Condition: used Scope of delivery: (See photo) (Specifications and data subject to change and errors excepted!) We are happy to answer any further questions by phone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: Hedpfsy Hkd Hex Af Ajfk - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Features and technical specifications: - Cantilever machine (6 units) - Travel dimensions: X = 3,490 mm Y = 1,690 mm Z = 205 mm - Machining dimensions: X = 3050 mm Y = (Max. milling depth – tool radius) 1,345 mm Z = 150 mm - TF 20 drilling head - Power 2.2 kW - 8 vertical spindles, spindle spacing 32 mm in the X direction Hfodszk Nz Aepfx Af Aok - 6 vertical spindles, spindle spacing 32 mm in the Y-axis - 2+2 horizontal spindles in the X-axis - 1+1 horizontal spindles in Y-axis - with integrated 120 mm grooving saw blade - with 9.2 kW electric milling spindle with ISO 30 mount - with C-axis - with angle unit - with 12-position tool changer - with tool change station for angle units - with vacuum pump 80–100 m³/h - Total connected load 16 kW - Compressed air 6 bar - Compressed air consumption 210 NL/m - Extraction connection 250 mm - Extraction volume 5,300 m³/h - Extraction velocity 30 m/sec - Dimensions: 5940 x 3800 x 2510 mm - Weight: 3,700 kg Availability: at short notice Location: 63934 Röllbach

Condition: excellent (used), Weiss Type: EmissionEvent VOC/240 Weiss Technik EmissionEvent VOC/240 Industrial Emission Test Chamber / VOC Test Chamber / Climatic Test Cabinet Water-cooled A professional emission test chamber is offered for sale Weiss Technik EmissionEvent VOC/240 (Year of manufacture: 2018) from an industrial laboratory and testing operation. The device is designed for conducting standardized emission tests under precisely controlled temperature, climatic, and process conditions, and is built for continuous use in laboratories, industrial settings, and quality assurance. What does VOC mean / What does the device do? VOC = Volatile Organic Compounds The device measures and tests the outgassing (emissions) of materials under defined conditions. It analyses which substances are released into the air by a given material. Typical applications include: - Emission testing of plastics, components, materials - Automotive interior material testing (odor / pollutants) - Building products & furniture emission measurement - Packaging, textiles, adhesives, paints - Quality control and standard testing (e.g. ISO / VDA / DIN) The test system generates precisely defined temperature, humidity, and air conditions. Emissions are extracted from the test space using a carrier gas (e.g. nitrogen or air) and can subsequently be analyzed using appropriate measuring equipment. Device features / Equipment: - Stainless steel emission test chamber (hermetically sealed) - Temperature and climate control - Carrier gas system for emission measurement - Automatic process control with touch panel - Programmable operation / continuous operation possible - Sampling ports for VOC analysis - Industrial-grade construction (suitable for laboratory and continuous operation) Technical data for temperature testing: - Temperature range: +20 to +130 °C - Temporal temperature deviation at chamber center: ±0.1 to ±0.3 K - Spatial temperature uniformity: ±0.1 to ±0.5 K - Temperature change rate (according to IEC 60068-3-5): Heating: 0.4 K/min Cooling: 0.3 K/min - Temperature change rate (average, with enhanced heating and cooling capacity): Heating up to +65 °C: 1.5 K/min Cooling from +65 °C to +20 °C: 1.3 K/min Technical data for climate testing: - Temperature range: +20 to +130 °C - Dew point range: +5 to +60 °C - Relative humidity range: 5 to 95% RH - Temporal temperature deviation: 0.1 to 0.3 K - Temporal humidity deviation: -3 to 3% RH Dimensions EmissionEvent VOC/240 External dimensions (unit): Width: approx. 1350 mm, Depth: approx. 2500 mm, Height: approx. 1985 (2190) mm Internal dimensions (test space): Emission test chamber: 200 l Gross test chamber volume: 240 l Net test chamber volume: 208 l Max. test sample load: 80 kg Internal dimensions VOC/240: Width: approx. 600 mm, Depth: approx. 560 mm, Height: approx. 600 mm Hfodpfxoziyz Rs Af Ask Electrical: Voltage: 3/N/PE AC 400 V ±10% / 50 Hz Nominal power: 12.1 kW Nominal current: 30 A Protection class: IP54 Refrigerant: R134a – 2.5 kg Weight: approx. 1080 kg Important information for you as the buyer: The following procedures are carried out on the chambers we offer prior to sale: 1. Functional inspection and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Following successful inspection, a documented trial run is carried out Condition: used Scope of supply: (see picture) (Technical data and specifications subject to change and errors!) For further questions, feel free

Condition: repair required (used), Year of construction: 2010, functionality: limited functionality, BIESSE Skipper 130 - Year of manufacture: 2010 Hjdpfxjzp Simj Af Ajfk - Available from September 2026 - The lower drilling unit has a problem and needs to be repaired. - The machine is still in operation and can be inspected. - Please feel free to contact us if you have any questions.

Condition: excellent (used), Year of construction: 2008, load capacity: 130 kg, arm reach: 3,200 mm, controller manufacturer: ABB, controller model: IRC5, The IRB 6640 serie is ABB Robotics latest generation of high payload, high performance industrial robots. Based on the famous IRB 6600 series, with the flexible bending backwards concept, the very high wrist torque, the service friendly modular built up and the availability, significant for ABB’s robots, the IRB 6640 robot family goes even further. With focus on high production capacity, compact design and low weight, simple service and low maintenance cost. The IRB 6640 is ideal for process applications, regardless of industry. Typical areas are for example Spot Welding, Material Handling and Machine Tending. Specifications Payload: 130 kg Arm Reach: 3200 mm Model Type: IRB6640 Controller: IRC5 Hjdjw Nalkspfx Af Asfk Model Year: 2008 Condition: Used Included: Manipulator + IRC5 Control Cabin + All Wire Sets + Teachpendant We have a dedicated team handling these robots. If you share details about your project, we can recommend the most suitable robot for your needs and provide support throughout your project. We have big range of robots in stock, and if you are considering bulk purchases, we would be happy to offer a discount. The same model is available from the same or different production years, and bulk purchases can benefit from special pricing. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman.

Condition: excellent (used), ABB IRB6640-130/3.20 and IRC 5 controller and cable's. DEVELOPMENT OF GSG ROBOTICS Hfsdpfx Afjxq Trfj Ask GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: used, Year of construction: 1973, spindle diameter 130 mm x-travel 3000 mm y-travel 2000 mm total power requirement 4,5 kW weight of the machine ca. 30 t Spindle Ø 130 mm Spindle taper SK 50 Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Lower table 3,300 x 2.400 mm Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Speed range, partially infinitely variable 4.5 - 1,250 rpm Weight, approx. 30,000 kg Accessories / Special Features * HEIDENHAIN Digital Display for 3 axes. * Hardened guideways. * Ball screw spindles. Hfedpot Hwt Sjfx Af Ask * Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. * Moving operating platform. * Hanging control panel. * Manual operating control. * Platform. * Hydrostatics in the column displacement. * Mounting plate 3,200 x 2,500 mm, planed, with t-slots. * Top table approx. 1,400 x 2,600 x height 900 mm, one face is handled. * Hydraulic clamping of column and slides. * Motor driven tool clamp. * Lots of accessories, including tool holders with and without tools, separate chip extractor, clamping aids, 1 angle plate, and other plates. Lots of other accessories. This is a strong machine which is very suitable for heavy cuts and therefore ideal for the machine tool industry and for tool manufacturers. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest. We have other horizontal borers on stock. Please let us know what you need.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, pressing force: 130 t, stroke length: 250 mm, controller model: Cybelec, distance between stands: 3,050 mm, working length: 3,550 mm, TECHNICAL DETAILS Pressing force: 130 t Bending length: 3,550 mm Hfedpfxezk E Aio Af Ask Frame width: 3,050 mm Stroke: 250 mm MACHINE DETAILS Control system: Cybelec Dimensions & Weight Footprint: 4,000 x 2,000 x 3,000 mm Machine weight: 11,600 kg

Condition: used, mileage: 350,920 km, power: 96 kW (130.52 HP), first registration: 06/2015, fuel type: diesel, overall weight: 3,300 kg, color: grey, gearing type: automatic, emission class: euro5, number of seats: 3, loading space length: 2,900 mm, loading space width: 1,900 mm, loading space height: 1,900 mm, Equipment: ABS, central locking, electronic stability program (ESP), had accident, soot filter, !!!!! ENGINE FAILURE !!!!! 3-seater, power steering, driver airbag, automatic transmission, tachometer, power steering, electric windows, onboard computer, electric exterior mirrors, center armrest, gull-wing doors, sliding side door/right, central locking + remote control, 3-pin power outlet, Carrier Xarios 350 refrigeration unit. Errors and prior sale excepted. For sale to commercial businesses and for export only. Hodpfjzp S Agjx Af Ajfk !!!! Fg-7146 !!!! Key number 156 !!!!! !!!!! Test drive/inspection drive at TÜV, DEKRA, or Fiat possible !!!!!

Condition: used, mileage: 362,000 km, power: 96 kW (130.52 HP), first registration: 06/2014, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), had accident, soot filter, !!!!! ENGINE FAILURE !!!!! 3-seater, power steering, driver airbag, 6-speed manual transmission, tachometer, power steering, electric windows, onboard computer, electric exterior mirrors, center armrest, gullwing doors, side door/right, central locking + remote control, 3-pin power socket, Thermo-King V-300 Max refrigeration unit, air conditioning, etc. Sale only to commercial businesses and for export.!!!!! All documents can be sent in advance by email or WhatsApp to check mileage, accident history, vehicle history, etc.!!!!! WhatsApp!!!!! Hedpszp S Aajfx Af Aofk !!!! Fg-8925 !!!! Key number 185 !!!!!

Condition: used, mileage: 105,754 km, power: 100 kW (135.96 HP), first registration: 01/2020, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,180 mm, fuel: diesel, CO₂ emissions: 251 g/km, fuel tank capacity: 80 l, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, total length: 5,050 mm, total width: 2,070 mm, total height: 2,310 mm, Year of construction: 2020, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, electronic stability program (ESP), full service history, navigation system, onboard computer, power assisted steering, power mirror, sliding door, trailer coupling, General information Number of doors: 5 Model range: Jun 2019 - Dec 2020 Cab: single Technical information Torque: 360 Nm Number of cylinders: 4 Engine capacity: 2.298 cc Measures length/height: L1H1 Weights Empty weight: 1.855 kg Carrying capacity: 1.645 kg GVW: 3.500 kg Interior Interior: black Consumption Average fuel consumption: 6,7 l/100km (42 MPG) Urban fuel consumption: 6,7 l/100km (42 MPG) Extra urban fuel consumption: 6,7 l/100km (42 MPG) Maintenance, history and condition Number of owners: 3 APK (MOT): tested until 07/2027 Number of keys: 1 (1 hand transmitter) Financial information Ask for the financial lease options Product safety Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL Hodpfx Afoyylz Hj Aofk = Additional options and accessories = - Automatic dipped headlights - Car kit - Co-driver's bench - Driver's airbag - Electrically operated front windows - Front central armrest - Height adjustable steering wheel - Immobiliser - Loading floor - Multifunctional steering wheel - Panelling - Partition - Radio - Radio with DAB+ - Rear parking sensor - Remote central locking - Sliding side door right - Telephone enabled with Bluetooth - Third brake light

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 130-750 CX Year of manufacture: 2010 Injection Unit: Screw diameter: 40 mm Shot weight: 228 g Injection pressure: 2500 bar Dosage volume: 251 cc Clamping Unit: Clamping force: 130 t Tie bar distance: 470x470 mm Hodpfx Afezc Nwpe Ajfk Platen size: 745x770 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC5 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Pneumatic core pull x 6 Control system with 18 hot runner zones Injection unit hardened – bimetal Proportional valve on injection unit – accurate injection Dimensions: Weight: 9000 kg Length/Width/Height: 4.90x1.60x2.10 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request