Used Screw Capper for sale (5,362)

Condition: good (used), functionality: fully functional, Twin screw extruder / laboratory extruder - 2 x 30mm screw diameter - 4x heating zones - dosing Gkodpfx Aou Hik Dof Asa - Control system

Condition: excellent (used), The system is suitable for conveying, loosening, and gently mixing bulk materials, granules, powders, or similar materials. The special screw geometry with mixing/paddle sections not only transports the material but also moves and mixes it during the conveying process. Technical data: Gksdpfjzabrmsx Af Asa * Manufacturer: Waeschle / Wäschle * Type: DST 200 * Year of manufacture: 2001 * Screw diameter: approx. 200 mm * Motor power: 2.2 kW * Design: Stainless steel * Function: Conveying, loosening, mixing * Immediately available from stock

Condition: excellent (used), functionality: fully functional, Twin-Screw Extruder Werner & Pfleiderer / Coperion ZSK 83 For sale is a ZSK 83 twin-screw extruder (co-rotating) from Werner & Pfleiderer / Coperion. The machine is in very good condition and has been regularly maintained. Technical details: • Model: ZSK 83 • Screw system: Co-rotating twin-screw • Motor power: 46 kW • Barrel: Water-cooled • Degassing zone: available • Dosing unit: included (as seen in the photos) • Spare screw elements: available • Control system / control cabinet: in good condition, fully functional General information: Gkjdpfex Dkmgox Af Aoa This line is ideally suited for compounding, masterbatch, recycling, polymer, and filler applications. The extruder has been overhauled as needed and technically inspected. Inspection and test run on site possible by arrangement. Worldwide transport possible. If interested, please get in touch—further photos, datasheets, and videos are available.

Condition: excellent (used), functionality: fully functional, Twin-Screw Extruder / Twin-Screw Kneader COLLIN ZK 25 For sale is a COLLIN ZK 25 twin-screw extruder in a compact laboratory or technical center design. The machine is ideal for trials, compounding, product development, as well as smaller-scale production applications. The extruder features a screw diameter of 2 x 25 mm with a process length of 36 D (6x6 D). Depending on the configuration, screw speeds of 460 / 600 / 800 min⁻¹ are possible. The drive power is 9.7 / 12.5 / 16 kW. The maximum melt pressure is 320 bar, and the maximum melt temperature is 400 °C. The machine is equipped with multiple heating zones. Barrel heating is 1 x 850 W plus 5 x 1200 W, and nozzle/adapter heating is 600 W. Water cooling is available, and temperature control is provided for zones 1 to 6, with water cooling connected via hose. Technical Data: • Manufacturer: COLLIN • Model: ZK 25 • Design: Twin-screw extruder / Twin-screw kneader • Screw diameter: 2 x 25 mm • Screw length: 36 D • Screw speed: 460 / 600 / 800 min⁻¹ • Max. melt pressure: 320 bar • Max. melt temperature: 400 °C • Weight: approx. 550 kg • Dimensions: Gjdpfsy A H Umex Af Aeka • Length: approx. 2,100 mm • Width: approx. 600 mm • Height: approx. 1,900 mm • Screw center height: approx. 1,100 mm Electrical Data: • Connection: 3 x 400/230 V, 50/60 Hz • Power supply: L1 / L2 / L3 / N / PE • Fusing: 3 x 50 A • Max. connected load with downstream units: 30 kW Applications: Ideal for laboratory usage, technical centers, R&D, test series, compounding, and material testing.

Condition: like new (used), functionality: fully functional, As-new twin-screw volumetric feeder As shown in the photos, the unit features: • Twin screws with approx. 45 mm diameter • Integrated paddle mechanism (agitator) inside the hopper • Rectangular hopper with stainless steel liner Gksdpfx Ajyfm Epjf Aea • Driven by a 0.55 kW electric motor The feeder is in as-new condition and fully functional. Ideal for powders, granulates, or difficult-to-flow bulk materials.

Condition: excellent (used), functionality: fully functional, Brabender Single Screw Extruder 30 mm – 30 L/D – with K-Tron Twin Screw Feeder – Strand Die For sale is a fully functional Brabender single screw extruder in a compact design, ideal for laboratory, development, or small-scale production applications. Technical Data: • Manufacturer: Brabender • Screw diameter: 30 mm Gkjdpfxjyi Am Rj Af Aea • Process length: 25 L/D • Drive: 5.5 kW • Multi-zone heating system (5 zones) • Compact control cabinet with digital temperature control • Strand die adapted Features: • K-Tron twin screw feeder • Compact, clearly arranged control unit • Multiple heating zones with individual control • Melt temperature & melt pressure monitoring Condition: • Fully functional • Well-maintained overall condition • Ready for immediate use A trial run with customer material is available upon prior arrangement.

Condition: like new (used), functionality: fully functional, Used Brabender twin-screw feeder type DDW-H21-M-DDS20-50R • Year of manufacture: 1993 • Throughput range: 5 – 50 kg/h Gsdpfx Asyfm Spef Aeka • Integrated agitator / paddle system in the hopper (as shown in the photos) • Stainless steel hopper • Twin-screw design The feeder is in good condition, complete, and ready for immediate use. Ideal for powders, granulates, and poorly flowing bulk materials.

Condition: excellent (used), functionality: fully functional, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Technical Specifications: • Machine Type: ZSK 40 • Screw Diameter: 40 mm • Screw Length: 7 barrels × 4 D → approx. 28 L/D • Main Drive: 34.5 kW • Motor Speed: 1,800 rpm • Screw Speed: 40 – 400 rpm • Max. Torque per Screw Shaft: 325 Nm • Heating: Electric, connected load approx. 17 kW • Cooling: Water chiller unit • Temperature Control Zones: 6 zones • Barrel Temperature Sensors: 6 • Material Temperature Sensor: 1 • Material Pressure Sensor: 1 Barrel Configuration: • Feed barrel with liquid injection port • Open barrel with insert and 2 liquid injection ports • Multiple closed barrels with ports for liquid injection or measurement points • Degassing barrel General Features: • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance thanks to modular mixing and kneading elements • Modular system for screws and barrels • Drive section and process section mounted on stable base frame Gsdpfx Afeycuuyo Aska Fields of Application: • Plastics compounding • Masterbatch • Additive and filler incorporation • Laboratory and pilot plant use • Formulation and product development Condition & Runtime: According to the operating hour counter, the machine has run for less than one year and is therefore in excellent, nearly as-new condition. The screw elements are also as new. Options & Customizations: Upon request, we can design and install suitable tooling, such as strand dies, and integrate additional peripherals such as screen changers, pelletizing units, dosing technology, or other customer-specific components. The machine can thus be configured and delivered ready-for-operation according to customer requirements.

Condition: new, functionality: fully functional, Unused single-screw extruder / recycling extruder - Screw diameter: 140mm - Drive: Siemens motor 95 kW - Volumetric K-Tron dosing - Degassing zone - K-SWE 180 double piston screen changer / filter - strand nozzle Gksdpsqy E Evjfx Af Aea - Control system Optionally with strand pelletizer, water bath etc. Inspection possible by arrangement

Condition: like new (used), Year of construction: 2026, operating hours: 3 h, available immediately: Kaeser ASK 40 T - 11 bar screw compressor with integrated cold dryer with Controller SIGMA CONTROL 3 Year 2026 Operating hour: 3 h Pressure: 11 bar Nominal power: 22 kW Delivery rate: 3.50 m³ / min Sound level: 69 dB (A) Compressed air outlet: 1 1/4" Godpfx Ajyw Nurjf Aoka Dimensions length x width x height: 800 x 1460 x 1530 mm Weight: 620 kg Visit our store. We always have a large selection of new and used compressors in stock!

Condition: new, Year of construction: 2025, Exhibit available immediately: New Kaeser SK 25 T - 10 bar screw compressor with integrated cold dryer Pressure: 10 bar Nominal power: 15 kW Gedpfx Afezh Hwis Ajka Delivery rate: 2.11m³ / min Sound level: 67 dB (A) Compressed air outlet: 1 " Dimensions length x width x height: 750 x 1240 x 1260 mm Weight: 395 kg Operating hours: 0 Visit our store. We always have a large selection of new and used compressors in stock!

Condition: new, Year of construction: 2025, Exhibit available immediately: New Kaeser SK 25 T - 10 bar screw compressor with integrated cold dryer Pressure: 10 bar Nominal power: 15 kW Delivery rate: 2.11m³ / min Sound level: 67 dB (A) Compressed air outlet: 1 " Dimensions length x width x height: 750 x 1240 x 1260 mm Gjdpfjdrc Txsx Af Ajka Weight: 395 kg Operating hours: 0 Visit our store. We always have a large selection of new and used compressors in stock!

Condition: new, Year of construction: 2026, operating hours: 1 h, New speed controlled ALMIG LENTO 15 LK screwcompressor oilfree, compressor is on stock Immediately available. Controller: Air Control HE Technical specifications Type: LENTO 15LK Gedpfx Asdtm Ndef Aoka Possible overpressures of the compressor: (infinitely adjustable): 5 to 10 bar Delivery quantity at minimum / maximum speed: at 5 bar min/max : 1,03 to 2,64 m³/min at 6 bar min/max : 1,00 to 2,42 m³/min at 7 bar min/max : 0,97 to 2,20 m³/min at 8 bar min/max : 0,93 to 2,03 m³/min at 9 bar min/max : 0,90 to 1,82 m³/min at10 bar min/max : 0,87 to 1,63 m³/min elektric motor power: 15 kW Operating voltage / frequency: 400/50 V / Hz Residual oil content: 0 mg / m³ SPL: 50% load: 66 dB (A) 100% load: 68 dB (A) Length: 1880 mm Width: 850 mm Height: 1985 mm Weight: 890 kg Compressed air connection: G 1 inch

Condition: refurbished (used), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 002332192500000472, overall weight: 211 kg, total length: 1,320 mm, total width: 850 mm, total height: 1,720 mm, power: 7.5 kW (10.20 HP), fuel type: electric, volume flow: 63 m³/h, pressure (max.): 10 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Following transport damage, completely refurbished with a new screw unit! Coaxial screw compressor with maintenance-free drive and maximum energy efficiency across all pressure ranges. The low compressor speed and the reduced load on the bearings of the patented direct drive enable very long service lives. Electronic EasyTRONIC Micro II control for reliability and efficiency. Prevents motor overload, reduces wear, and extends service life. Monitors operating hours, temperature, and motor overload. Controls the direction of rotation of the motor via a phase sequence relay, thereby preventing potential damage during commissioning or after relocation. Optimized cooling system. Low-noise radial fan guarantees optimal operating temperatures even under unfavorable operating conditions. Thermostatically and electronically controlled fan and generously sized heat exchangers result in a longer service life and reduced fluctuations in oil temperature. User-friendly in every detail. Low noise, suitable for installation in any working environment. Small external dimensions, making transport and installation easy. Service-friendly due to optimal accessibility and easy disassembly and assembly of all components requiring maintenance. Gjdpozrnc Ijfx Af Aoka All air and oil pipes are made of heat-resistant rubber. Standard with star-delta circuit. Ready for connection with all fittings. Integrated desiccant dryer. Higher reliability of the compressed air system without costly downtime and production delays, while simultaneously ensuring product quality. Ready for use without any installation effort.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, Auction of two Kaeser screw compressors, one Kaeser refrigeration dryer, and one compressed air tank! Screw compressor Kaeser SK 22 Year of manufacture: 2020 Gjdpfxszktnyj Af Aska Screw compressor Kaeser SK 19 Year of manufacture: 1995 Refrigeration dryer Kaeser TB 26 Year of manufacture: 2016 Compressed air tank Volume: 500 l Year of manufacture: 1986

Condition: good (used), Year of construction: 2012, Ingersoll Rand screw compressor 225 Kw Year 2012 Gksdpju Ic Ryjfx Af Aea

Condition: used, Year of construction: 2013, Overview This KOSME Barifill RFC 50-60-10 VKP rinser - filler - capper block, built in 2013, is designed for the rinsing and filling of glass bottles in beverage production lines. The block combines a 50-station single-channel rinser, a 60-valve glass bottle filler with short-tube VKP filling system and a Zalkin CA9 360 NG rotary capping section in one compact stainless steel machine. With approx. 16,000 bottles/hour on 0.75 L and approx. 20,000 bottles/hour on 0.33 L, the block sits in an attractive mid-range capacity class for water, beer, cider, wine and other glass-bottle applications. Integrated foam cleaning supports hygienic operation; the machine is operated via a touchscreen HMI on an articulated suspension arm and is enclosed in transparent protective safety guarding with safety interlocks. The machine is still installed and under power and underwent extensive maintenance in Q4/2025. Please note: the Zalkin capping heads are not included in the sale price - the capper base machine is included; the 10 capping heads are optionally available. Technical data - Manufacturer: KOSME S.r.l. Gkodpfxszi I T Ie Af Aea - Model: Barifill RFC 50-60-10 VKP - Year of manufacture: 2013 - Machine type: rinser - filler - capper block for glass bottles - Filling system: short-tube VKP, 60 filling valves, 113 mm pitch - Rinser: 50 stations, single-channel, 113 mm pitch - Capper: Zalkin CA9 360 NG (2013), 10 capping positions, approx. 22,000 bottles/hour (capping heads not included in the sale price, optionally available) - Capacity: approx. 16,000 bph at 0.75 L / approx. 20,000 bph at 0.33 L - Foam cleaning: integrated - Control: touchscreen HMI on articulated suspension arm - Electrical supply: 400 V, 50 Hz, 17 kW installed power, 38 A - Compressed air: 6 bar, approx. 450 Nl/min - Water: 4 bar, approx. 3.5 m³/h - Machine weight: approx. 10,500 kg Equipment - KOSME Barifill RFC 50-60-10 VKP main machine - 50-station single-channel rinser - 60-valve glass bottle filler, short-tube VKP filling system - Integrated foam cleaning - Zalkin CA9 360 NG capper base machine - Touchscreen HMI on articulated suspension arm - Stainless steel machine frame with transparent protective guarding and safety interlocks - Process piping, vacuum / air equipment, stainless steel bottle handling - Layout drawing available - Optionally available (not included in the sale price): Zalkin capping heads Condition Used - installed in an industrial production environment and still under power. The machine underwent extensive maintenance in Q4/2025 and can be visited and inspected in operation on request. Availability From November 2026 (week 45). Location: Germany.

Year of construction: 1994, condition: good (used), Manufacturer: Boge Type: V LEX 45 Gsdpjhtq Dvsfx Af Aoka Engine: 45 kW Capacity: 6.5 m³/min

Condition: used, Year of construction: 2003, functionality: fully functional, power: 30 kW (40.79 HP), Manufacturer: KAESER Model: ASD 57 Motor: 30 kW Gkodpfswtz E Uox Af Aea Capacity: 4.5 m³/h Year of manufacture: 2003 Operating hours: 29,900 h

Year of construction: 2007, condition: good (used), Volume flow rate: 4.6 m3/min. Pressure: 10 bar Main motor power: 30 kW Power supply: 400 volts, 50 Hz Connection thread: 1 1/2 inches Operating hours: 8000 h Gksdji D D Niopfx Af Aea Includes compressed air dryer!!! Space requirement (L x W x H): 1850 x 1050 x 1760 mm Weight: 910 kg Good condition.

Condition: used, operating hours: 48,000 h, Manufacturer: Alup Gjdpfsur N Tbox Af Aeka Motor: 22 kW Output: 3.9 m3/min Loaded operating hours: 48,000 h

Condition: good (used), Year of construction: 2010, Screw compressor COMPAIR L15-10, serial number CD10001916004, pressure 10 bar, output 15 kW, year of manufacture 2010. Pressure vessel OKS, serial number 486069, volume 1,500 liters, year of manufacture 2001. Refrigerant dryer ALUP ADQ 180 (E6), serial number ITJ912677, year of manufacture 2025. Gedpfx Aszqcmxjf Aoka

Year of construction: 2006, condition: good (used), 1087/5000 Complete Desoutter screwdriver system consisting of: 2 x Transducer controlled angle screw spindles Desoutter EML51-20J Art.Nr .: 6151650640 Torque range: 30 to 135 Nm Output: 1/2 " Number of revolutions. 403 min-1 Length: 166 mm Diameter: 51.2 mm 1 x screw control Desoutter MODCVI-2 (= rack version of TWINCVI-2) with transformer. Art.Nr .: 6159325210 Screw - on cable: 2 Number of screw cycles per channel: 250 Number of phases in a screw cycle: 20 IO Sum counter: 99 Screwdriving Bins: Moment + Angle + Date + Time + Result + (bar code): up to 11600 Screws: 6 Possible screw strategies: Torque control with angle control Rotation angle control with torque control Dremoment- / Drehwinkelsteuerung Torque control with rotation angle and gradient control Rotation angle control with torque and gradient control Godpfx Aodcmdljf Ajka Stretch control Hold torque / position Friction torque test Electricity compatibility 1 x motor cable 5 m length Art.Nr .: 6159171120 1 x Sensor cable length 5 m Art.Nr .: 6159171220 Including operating instructions

Condition: excellent (used), Year of construction: 2004, Fini Cube 10- This is a compact 10HP industrial screw compressor. It can deliver max pressure of 10 bar with a 7.5KW electric motor. I was purchased in 2004 and was serviced on a yearly basis by the fully trained technicians of the local Fini agents. This compressor was used as a back up compressor to our Fini BSC 20 compressor so it was only used periodically to ensure it functionality when required. Gkedpfxszluihe Af Aja It come complete with an MTA air dryer.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, This FINI BSC 20 is a high performance screw compressor that delivers up to 10bar of max pressure with a 15KW electric motor. Gkedpfx Aezlufpjf Aea This compressor was purchased new and was serviced on a yearly basis by the locally trained Fini agents. It comes complete with an MTA air dryer unit.