Used Screw Tap for sale (6,487)

Condition: excellent (used), Year of construction: 2017, volume flow: 2.2 m³/h, pressure (min.): 8 bar, MARK RMA 15 IVR screw compressor Variable speed (inverter driven) 15 kW motor Nwedsymmk Iopfx Ag Iec Capacity 2.2 m3/min Pressure 13 bar The compressor is fully operational.

Condition: excellent (used), Year of construction: 2015, volume flow: 1.6 m³/h, pressure (min.): 13 bar, ALUP ALLEGRO 11 Screw Compressor Variable speed (inverter-controlled) Nwodpeymmdnsfx Ag Iec Motor 11 kW Capacity 1.60 m3/min Pressure 13 bar Year of manufacture 2015

Condition: ready for operation (used), Year of construction: 2001, operating hours: 48,000 h, functionality: fully functional, pressure (max.): 12.5 bar, type of cooling: water, Equipment: type plate available, well-functioning variable speed screw compressor, water-cooled Nwsdpsykuqwsfx Ag Ioc

Condition: good (used), max. threading capacity up to M 6 with guide cartridge throat 130 mm drive power 0,55 kW dimensions L x W x H approx. 350 x 650 x 750 mm weight approx. 90 kg Accessories / special features: - Threaded guide cartridges: 1 x pitch 0.5 mm 1 x pitch 0.6 mm 1 x pitch 0.7 mm 2 x pitch 0.8 mm 1 x pitch 1.0 mm - Various adjustable working cycles such as: Automatic, foot operation Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Nodpjnyh Tnjfx Ag Iswc

Condition: used, Year of construction: 2005, operating hours: 52,029 h, functionality: fully functional, power: 37 kW (50.31 HP), volume flow: 375 m³/h, pressure (min.): 6 bar, pressure (max.): 8.5 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, USED KAESER SCREW COMPRESSOR BSD72SFC + REFRIGERATION AIR DRYER TD61 Installation consists of: - 1 x Kaeser frequency-controlled screw compressor BSD72SFC Capacity: 6.25 m³/min Pressure: max. 8.5 bar Motor power: 37 kW Njdpfjykriqox Ag Ijwc Total hours: 52,029 / load hours: 38,411 - 1 x Kaeser refrigeration air dryer TD61 Capacity: 7.0 m³/min Motor power: 1.1 kW - 1 x cyclone separator ZK04 with automatic condensate drain Capacity: 7.0 m³/min - 1 x fine filter FF-71 Capacity: 7.1 m³/min

Condition: excellent (used), Year of construction: 2008, operating hours: 112,351 h, functionality: fully functional, Kaeser ESD351 screw compressor, 200 kW with 8 bar and 36.80 m3/min. Air-cooled. Nwodpfeyhb Iwsx Ag Iec

Condition: excellent (used), Year of construction: 2008, operating hours: 126,772 h, functionality: fully functional, Kaeser DSDX243SFC screw compressor, 132 kW with 8.5 bar and 26.90 m³/min. Integrated frequency converter. New compressor stage installed at around 45,000 operating hours. Nwjdpeyhakkofx Ag Iec

Condition: used, Product supply bunker “Heckmann” with hopper ± 2.000L with driven shafts with fingers to separate the product input height: ± 3,400 mm 2 x 3kW, 1500 / 16 rpm dimensions (l x w x h) : ± 2.700 x 2.600 x 3.400 mm + Elevating spiral screw “Heckmann” all stainless steel discharge height: ± 5.800 mm Nwodpfx Aoydk Ifjg Iec diameter of the screw : ± 600 mm length of the screw : ± 8.500 mm dimensions hopper: ± 1.300 x 1.000 mm dimensions: (l x w): ± 9.200 x 1.600 mm safety grille 5.5kW, 1500/20 rpm

Condition: good (used), Year of construction: 1983, Margin scheme taxed according to §25a German VAT Act. You will receive a proper invoice; however, VAT will not be shown separately. Internal article no.: 26012 You are welcome to inspect the machine under power on over 500m² of heated storage area. Leadscrew and feed shaft lathe Voest Alpine DA180 Max. swing over bed: 380mm Distance between centers: 800mm Spindle bore: 52mm Tailstock: MT4 Multifix "B" basic holder Chuck guard (with switch) Röhm 3-jaw chuck 200mm Dimensions (LxWxH): 250 x 140 x 140cm Weight: approx. 1200kg The machine comes from a training facility and is in well-maintained condition. Njdpfjyg Dl Aox Ag Ijwc

Condition: excellent (used), EXTRUDER SCREW & BARREL manufacturing machine CNC milling machine for extruder screws (thread and gear milling machine) Manufacturer: Wanderer TYPE: GF 34 CNC Year of manufacture: 1991 4-axis path control Siemens Sinumerik 3 M (GA4) with electronic handwheel, equipped with RF radial milling head for machining extruder screws, including climb milling unit, automatic chip conveyor, coolant system. Includes: 1 fixed steady rest, 2 clamping steady rests, 2 bushing jigs, 1 chuck, RF milling head, safety guard with sliding doors, operating key, machine manuals, control documentation, etc. Main drive: 20 kW DC Maximum workpiece diameter: 600 mm Nwsdpoyldq Aefx Ag Isc Milling length: 3000 mm Thread pitch: 1 – 9999 mm Workpiece diameter over support: 160 – 320 mm Spindle bore: 120 mm Number of teeth min/max: 4 – 100 Tool holder: ISO 50 Stepless longitudinal feed: 1 – 5000 mm/min Workpiece weight: 2000 kg Electrical specifications – voltage/frequency: 380 / 50 V/Hz Total power requirement: 50 kW Machine weight: approx. 10,000 kg

Condition: excellent (used), This system If designed to continuously cool veg products in glycol chilled water what was bought new by our customer to chill sachets of hot sauces and soups at 2500 KG per hour. Available separately or as a line with infeed and outfeed conveyors. Nodpfx Ajh Uyg Njg Iewc

Condition: excellent (used), Year of construction: 2017, operating hours: 39,772 h, functionality: fully functional, Atlas Copco GA160 screw compressor, 160 kW with 7.5 bar and 30.20 m3/min. Njdpfxoyg I Rce Ag Iewc

Condition: like new (used), functionality: fully functional, Used Brabender twin-screw feeder type DDW-H21-M-DDS20-50R • Year of manufacture: 1993 • Throughput range: 5 – 50 kg/h • Integrated agitator / paddle system in the hopper (as shown in the photos) • Stainless steel hopper • Twin-screw design Nodpeyfm Spjfx Ag Iowc The feeder is in good condition, complete, and ready for immediate use. Ideal for powders, granulates, and poorly flowing bulk materials.

Condition: like new (used), functionality: fully functional, As-new twin-screw volumetric feeder As shown in the photos, the unit features: • Twin screws with approx. 45 mm diameter • Integrated paddle mechanism (agitator) inside the hopper • Rectangular hopper with stainless steel liner Nsdpfxjyfm Epe Ag Iowc • Driven by a 0.55 kW electric motor The feeder is in as-new condition and fully functional. Ideal for powders, granulates, or difficult-to-flow bulk materials.

Year of construction: 2007, condition: used, Screw Compressor Work pressure 10 Bar Power 15 kW Output 2,2 m3/min Noise level at 1 meter 61 DB(A) Working voltage 3x 400 V Nsdpfx Agjyddkge Ijwc Frequency 50 Hz Dimensions (LxWxH) 1300 x 780 x 1555 mm Weight 470 kg Including compressed air dryer Berko BFN 186 (2007) Dimensions (LxWxH) 535 x 515 x 865 mm Weight 46 kg Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Year of construction: 2017, Böllhoff Uniquick Vario Screw Feeder UNIQUICK Feeder Type 360 Plastic sorting bowl, diameter 360 mm Quiet and surface-friendly conveying Optimal screw dimensioning depending on the material being conveyed (width and height) Integrated and controlled baffle High wear resistance Consistent conveying performance thanks to amplitude control In a sound-insulated housing on a frame Track width: 20 mm Connector head diameter up to 20 mm Connector length up to 55 mm Filling volume: 3 l Njdpswbr N Hjfx Ag Ijwc SIM BB-10-C (ws) Belt Hopper Bucket, chute: stainless steel Belt: white with FDA approval Filling volume: 10 liters Max. filling weight: 35 kg Drive: AC gear motor 230V / 50Hz Bunker with innovative drive to ensure a controlled, quiet, and gentle feed of screws and fasteners. UNIQUICK Multi Modularly expandable 3-way diverter Distributes the tested screws to three stationary screwdriving devices Separation Adapted discharge rail Precise guidance at the head Modular design Few format-dependent parts Component reproducibility Sensor monitoring Maintenance-free Sound insulation Screw conveying in a plastic bowl Lined with sound-insulating material Airtight blow-in of screws Compressed air maintenance unit Compressed air connection: 6 bar Power supply: 230 V AC Year of manufacture: 2017 Dimensions: HxWxD 1050 x 650 x 650 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs upon request!

Condition: good (used), WSM Stationary Screwing Unit Assembly and testing of components for car radios and navigation systems. The assembly station is enclosed in a protective housing. The service doors are equipped with monitoring switches with interlocks. The doors are locked during automatic operation and can only be opened during automatic stop or manually after pressing the "Doors" button on the control panel. Automatic operation cannot be started with a door open. Operational Sequence The station is loaded with the pre-assembled component via the transfer belt. Nwodpfeibichjx Ag Ijc The following describes the operation steps of the automatic station with a transfer belt. In normal operation, all three stations operate in parallel. - Positioning the test unit (WT) with the pre-assembled module in station 2.1 - Lowering the carrier with the scanner and vision sensor - Scanning the 3 codes (front panel, front PCB, SD PCB), comparison with the database - Checking the correct locking of the FFC in the connector - Raising the carrier and lowering the test unit onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.2 - Positioning the screwdriver and screwing the front PCB in place - Lowering the test unit (WT) onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.3 - Lowering the light shield and making contacts, adjusting the carrier with the test sensors from below - Type-dependent testing of the SD + CD slot lighting and buttons - Functional test of the CD eject button - Lowering the test unit (WT) onto the conveyor belt > continue If errors occur during testing, they are displayed on the screen. and can be repaired if possible. For this, the system is switched to manual operation and the doors are opened. After the repair and restarting the automatic system, the workpiece carrier is tested again in the station. If a repair is not possible (e.g., due to a screw error), the workpiece carrier is marked as NIO (Not Okay) in the control system and is not processed further. Manual NIO marking and rejection is also possible. Financing through our bank is also available. komplett-konzept.leasingo.de More assembly stations, new and used, can be found in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2010, operating hours: 7,637 h, overall weight: 1,970 kg, ALMiG Direct 75 screw compressor The DIRECT 37 - 315 series is designed in such a way that it can be operated extremely economically in any kW class thanks to its unique design concept and can therefore be used for a wide range of applications. These fixed-speed compressors are particularly suitable for use as base load compressors. Separation system - highest compressed air quality thanks to proven multi-stage separation Air Control P - the intelligence of the compressor; thinks, monitors, documents. With the option of connecting to the Internet, there are virtually no limits to communication. Drive system - highly efficient, reliable direct drive Nwjdpfx Agettucgs Ijc Compressor - powerful, excellent efficiency Cooling unit - large-area coolers for the lowest compressed air outlet temperatures and optimum cooling liquid temperatures System fan - powerful, efficient, high-performance Drive motor - robust drive motor designed for reserve capacity ALMiG Direct 75 Year of construction 2010 Final pressure 11 bar Motor output 75 kW Volume flow according to ISO 1217 (Annex C-1996):11.58 m3/min Length 2300 mm Width 1400 mm Height 1860 mm Weight 1970 kg Operating hours 7637 h Load hours: 6317 h Downtime hours 167714 Total delivery volume 4506000 m³ Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more ALMiG compressors - new and used - in our store! International shipping costs on request!

Condition: good (used), Year of construction: 2011, operating hours: 10,337 h, overall weight: 3,830 kg, ALMiG Gear 132 screw compressor The screw compressors in the GEAR series are particularly suitable for very high compressed air requirements. The maintenance and service-friendly drive concept of the GEAR compressors includes a robust drive motor with strong power reserves. The highly efficient gearbox works with minimal slip, high operational reliability, is virtually loss-free with an efficiency of > 98% and is gentle on the drive. In addition, highly efficient separation of the cooling medium enables a minimum residual oil content of just 2-3 mg/m³. The encapsulated design of the gear set makes these systems ideal for use under the toughest operating conditions. Ideal for very high compressed air requirements Robust drive unit with high power reserves Virtually loss-free concept with efficiency > 98% Maintenance and service-friendly drive concept ALMiG Gear 132 Year of manufacture 2011 Final pressure 10 bar Nwsdpjttv Ibsfx Ag Isc Motor power 132 kW Volume flow : 18,04 Length 2800 mm Width 1400 mm Height 2025 mm Weight 3830 kg Operating hours 10337 h Load hours: 9378 h Downtime hours 13887 h Total delivery volume 11333000 m³ Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more ALMiG compressors - new and used - in our store! International shipping costs on request!

Condition: used, Year of construction: 2021, Technical details: feed pressure: 10 bar total power requirement: 7,5 kW volume capacity: 1,1 m³/min. Number of working hours: 0 h revolutions per minute of the motor:: 3000 U/min. voltage: 400 V / Hz rated capacity: 7,5 KW machine weight approx.: 438 kg dimensions L x W x H: 1,0 x 0,55 x 0,85 m SCREW COMPRESSOR WITH ELECTRIC DRIVE Nodpfx Aou Nz D Ujg Iowc with integrated pressure tank - type ADST 8; 6 liters capacity; size Ø 160 x 400mm with integrated dryer operation at the control panel on the unit air filter at the front i.D. *

Year of construction: 2003, condition: good (used), Schatz Advanced Screwdriving Unit  Schatz screw machine Length: 5450 mm Height: 3000 mm Unwinding stand Length 5020 mm 2 x Demag crane 1 x Liftket electric chain hoist  1 x Schatz 907500 Installation without Advantech TPC-1260 TE Touch Panel PC Nodsihiiiepfx Ag Iswc Financing through our bank is also possible. komplett-konzept.leasingo.de More screwdriving machines in other sizes - new and used - can be found here.

Condition: used, Atlas Copco GA132 for sale, Oil injected rotary screw compressor designed for heavy duty industrial applications. Delivers high capacity and continuous compressed air, suitable for manufacturing, automotive and packaging applications. 132Kw 25.79 cubic meter per min 1547 cubic meter per hour 911 CFM 7.5 bar Nwodpfeyh I Rpox Ag Iec Fully serviced and ready to go Very good condition both inside and out

Condition: used, Schraubenkompressor / Screw Compressor ECOAIR D 50 Nodpfxjxiv Rne Ag Iswc Baujahr / Year 1991 - Serial-No. 27020521 Verdichtungsdruck / Compression Pressure 10 bar Drehzahl / Rotation Speed 2950 u/min Volumenstrom / Volume flow 5,0m2/min Leistungsbedarf des Verdichters / Power requirement of the compressor 37 kW  Abmessungen / Dimensions 200 x 80 x 150 cm  Gewicht / Weight 730 kg Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2010, Refrigeration Dryer Manufacturer: Kaeser Model: TD 61 Year of manufacture: 2011 Max. volumetric flow: 6.3 m³/min Max. pressure: 16 bar Nodpfx Agoykrbgs Iowc Power: 1.25 kW

Condition: good (used), Year of construction: 2006, Screw compressor MARK Type: MAS 7,5KW Year 2006 Power 7,5KW Pressure : 10 Bar Dimensions: L100cm X W 62 cm X H 105 cm Weight: 215 KG Nwsdetx Aknepfx Ag Ijc Ready to use condition.