Used Size Press for sale (29,255)

Condition: ready for operation (used), controller manufacturer: Cadman Touch-B, throat depth: 350 mm, installation height: 500 mm, operating speed: 10 mm/s, reverse speed: 80 mm/s, total length: 5,545 mm, total width: 1,990 mm, total height: 3,380 mm, power: 30 kW (40.79 HP), travel distance Z-axis: 250 mm, empty load weight: 23,000 kg, passage width: 3,150 mm, table width: 250 mm, 5 assen: Y1 / Y2 / X / R / V Laserbeveiliging voor en achter CNC-bombering boven- en onderaan LVD-tooling opname Dodpfoyf Rt Rjx Afnoun Capacity: 250 ton x 4100 mm Backgauge: CNC Locking speed: 80 mm/sec

Condition: used, Bystronic Beyeler Xpert 250 Brake Press with Bystonic CNC Control, 5100mm Bed, Hydraulic Tool Clamping, Max Force 2500kw, Max Stroke 265mm, Auto Back Stroke 265mm, Auto Backstop 3 Axis, Fiessler Electronik Sensor System. S/No. 8710001 (2008), Machine Weight 26,000kg. Country of Origin: Germany Duedpfx Afsyidx Eonjn Location: These lots are located in Hull, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), functionality: fully functional, CNC Press Brake Press Force: 170 t Bending Length: 4000 mm Distance Between Frames: 3750 mm CNC: Cybelec DNC 880 S Throat Depth: 400 mm JEAN PERROT Synchro Press Brake 170T x 4000mm – CNC Cybelec 880 S Technical Specifications: Capacity: 170 tons / Bending length 4000 mm. Clearance between side frames: 3750 mm. Throat depth: 400 mm. Equipment: Crowning system and hydraulic tool clamping. Safety: Front and rear light curtains. Duodpjyfxa Sofx Afnsn

Condition: used, Control: Manual Workpiece width: max. approx. 4,250 mm Dujdjw I Dbmjpfx Afnjn Workpiece height: max. approx. 2,400 mm Hydraulic frame press by Schafberger & Sprödhuber with manual electric adjustment.

Condition: used, Technical data: Upon request Electro-pneumatic cup hinge boring machine or fitting boring machine Schafberger+Sprödhuber type BS for drilling cup hinges or fittings with mechanical centering. Dedpfewvptfsx Afnjun

Condition: used, Pressing area: approx. 2,800 x 1,000 mm Press cylinders: 6 Heavy-duty pneumatic gluing press with perforated plate for flexible arrangement of the press cylinders. Dodpfx Afeviwqmenoun One cylinder without pressure shoe.

Condition: used, Connection: pneumatic, 6 bar Weight: 250 kg Device for final assembly of grave crosses. Dedpfx Ajlf H Uhsfnsun

Condition: used, Support table: 300 x 37 cm Weight: 180 kg Motor: 1.6 kW Duedpfxelfcntj Afnon MAW BEV electro-pneumatic cup hinge drilling machine for drilling cup hinges or fittings.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 0 kg Dedsvz Ev Iopfx Afneun Total power requirement 3 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 0 kg Total power requirement 3 kw Dujdpfjvz Etgjx Afnjn

Condition: good (used), Year of construction: 1975, Veneer press Dujdpfx Aox Akuzjfnjn - 3300 x 1350 mm - External dimensions: 4000 x 1650 x 2450 mm - Year of manufacture: 1975 - Approx. 5500 kg - Electrically heated platen, no dents - HP 120 - Press area height: 400 mm - 6 cylinders - Rack and pinion guide

Condition: excellent (used), Year of construction: 1986, Frame press T2 RP year of construction 1986, 2,2 kw Ele..-Hydraulic Djdpfxeu Rp Eio Afneun 3 press cylinders vertical, 2 horizontal Adjustable pressing pressure 0 - 2000 kg 2500 x 3000 mm pressing size Space requirement 4000 x 950 x 2600 mm

Condition: used, functionality: fully functional, For gluing stair treads - Hydraulic adjustment of the inclined beam - Hydraulic cylinder, laterally mounted on ball bearings, adjustable, 120 mm stroke - Combined and individual cylinder control Scope of delivery: Press complete with all accessories: 4 hydraulic cylinders with 120 mm stroke, 1.8 t per cylinder, 3 cylinders individually lockable, 1 cylinder for pressure beam adjustment, control panel for two operations, pressure gauge and regulator, hydraulic unit, oil tank, and hoses, - 220/380 Volt, - Press width 1800 mm Dujdoygwp Ujpfx Afnen - Press height 750 mm - Pressure beam support 80 mm - Weight approx. 500 kg

Condition: ready for operation (used), electrically heated Press dimensions 2,200 x 1,100 mm 4 press cylinders, diameter 80 mm Dedpfx Asygg Imofnoun Temperature of upper and lower plate separately adjustable

Condition: used, Year of construction: 2007, total length: 3,550 mm, total width: 1,800 mm, total height: 2,800 mm, Weight: 10.000 kg - Year: 2007 - Documentation available: Yes Duedpfx Afoyf Edwonsn - CE marking present: Yes - CE certificate present: Yes - Serial number: 11520 - Drive system: CNC - Control system brand: Baykal - Control system type: EC4-CNC - Power [kW]: 11.0 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 150 - Max. working width [mm]: 3100 - Column gap [mm]: 2550 - Max. stroke [mm]: 260 - Crowning system: CNC-controlled - Punch holder: Quick-release - Tool holder type: European-style - Transport dimensions: 3550mm x 1800mm x 2800mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: excellent (used), Year of construction: 1962, Veneer press Year of construction 1962 60 tons pressure 15 kw heating, 380 Volt 2500 x 1200 mm Duodetyk Hyepfx Afnon Heating plates are ok.

Condition: good (used), functionality: fully functional, Year of construction: 1991, Used 2-meter press brake by Hammerle Model: AP 100 2100 Capacity: 2100 x 100 tons 3-point bending Upgraded CNC control (approx. 2005) Upgraded Pilz laser safety system Includes tooling Year of manufacture: 1991 Duedoyfmmaopfx Afnjn

Condition: excellent (used), Year of construction: 2012, Amada EM3610NTK electric punch, 45 Station Turret with 4 Auto indexing units Duedpoyh Dt Tefx Afnon 2012 Year of manufacture Country of Manufacture: Japan Bridge Type 30 tonnes (196kN) High speed AC servo direct twin drive 1525 x 2500mm 1525 x 5000mm 4.5mm mild steel 160Kg max sheet weight mm 58 Stations Turret Turret Stations: 24 x A (Max. Dia. 12.7mm) 12 x B (Max. Dia. 31.7mm) 2 x C (Max. Dia. 50.8mm) 1 x D (Max. Dia. 88.9mm) Auto Indexing Stations 2 x B (Max Dia 31.7mm) 2 x C (Max. Dia. 50.8mm) 128 m/min WEIGHT 24.5 KGS

Condition: ready for operation (used), Year of construction: 2008, pressure 100 t stroke 310 mm table surface area 340 x 1010 mm dayligth 1045 mm column travel between the guideways 1010 mm diameter of piston 110 mm total power requirement 3.0 kW weight of the machine ca. 1230 kg dimensions of the machine ca. 1800 x 1300 x 2300 mm current new price approx. 12.000 euros special price on request Equipment: - Robust electro-hydraulic workshop press - with fixed working cylinder - Work table height-adjustable via hand crank - 2x locking bolts for fixing the table Dusdpfjyf N Elox Afnsn - 3x directional control valve supply-empty-return - Including oil filling - Operating instructions

Condition: used, Year of construction: 1985, Technical details: Pressure: 3 t throat: 150 mm max. ram stroke: 280 mm daylight dimension with clamping plate Slide/ up: 355 mm distance table/ram: 355 mm clamping plate on table: 280 x 290 x 50 mm passage opening in table: Ø 100 mm ram speed - forward: 0,1 m/s ram speed - reverse: 0,3 m/s mortise hole in ram: Ø 20 x 40 mm height over floor: 800 mm total power requirement: 1,5 kW weight of the machine ca.: 370 kg dimension machine xH: 0,8x1,2x1,9 m The single column press stands on a lower table (welded steel plate) Operation via foot switch The press has been modified -intake for foil for punching device -punching device FIBRO (plastic disc with Ø 47,5mm for punching) Dsdpfx Aeu Nfvbofneun *

Condition: used, Technical details: Pressure: 2,5 t throat: 155 mm max. ram stroke: 280 mm Dusdpfx Aju Nfv Usfnen distance table/ram: 450 mm clamping plate on table: 260 x 1000 mm ram speed - forward: 0,08 m/s ram speed - reverse: 0,32 m/s mortise hole in ram: Ø 20 x 45 mm height over floor: 930 mm total power requirement: 1,1 kW weight of the machine ca.: 500 kg dimension machine xH: 0,85 x 1,0 x 17 m The machine is equipped for straightening work. *

Condition: used, Year of construction: 1983, Technical details: Pressure: 160 t throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250x630x100 mm passage opening in table: 4x Ø 62mm mm ram speed - forward: 200 mm/s ram speed - reverse: 125 mm/S ram surface area: 450 x 850 mm Duedpfx Afou Nfvusnjn mortise hole in ram: Ø 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter *

Condition: used, Year of construction: 1991, Technical details: Pressure: 160 t stroke: 500 mm throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250 x 630 x 100 mm passage opening in table: 4x D=62 mm ram speed - forward: 200 m/s ram speed - reverse: 125 m/s ram surface area: 450 x 850 mm mortise hole in ram: 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter Duedpfx Ajw D Awmjfnsn *

Condition: used, Technical details: Pressure: 2,3 t Duodou Nfwlopfx Afnen stroke: 280 mm throat: 155 mm max. ram stroke: Vorlauf: 0,08 m/sec daylight dimension with clamping plate Slide/ up: 355 mm distance table/ram: max. 355 mm clamping plate on table: 280 x 280 mm passage opening in table: Ø 100 mm ram speed - forward: 0,08 m/s ram speed - reverse: 0,32 m/s mortise hole in ram: Ø 20 x 45 mm height over floor: 725 mm total power requirement: 1,1 kW weight of the machine ca.: 0,5 kg dimension machine xH: 0,6 x 0,7 x 1,6 m Press with mechanical 2-hand operation. Pressure test up to 2,3to performed. Good condition. *

Condition: used, Technical details: pressure: 25 t distance between columns: 360 mm stroke: 500 mm daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 0,200 m/s ram speed - reverse: 0,45 m/s Table dimensions: 630 x 500 x 71 mm passage inside table: Ø 182 mm surface area of ram: 450 x 360 mm mortise hole in ram: Ø 32 x 72 mm ram diameter: Ø 125 mm height over floor: 710 mm total power requirement: 12,5 kW weight of the machine ca.: 2,4 t dimension machine xH: 1,7 x 1,1 x 2,95 m Operation via two-hand control panel (and one-hand operation in set-up mode) Continuous and single stroke TÜV until * Djdpfou U D I Rjx Afnsun