Used Size Press for sale (29,424)

Condition: good (used), Refurbished machine Basic machine starts at 145.000 € net *Options at additional cost, see below with a full 1 year warranty one machine is directly available Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm including 2 m press channel Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Optional Equipment – Additional Charges Temperature Control Unit for the Pressing Tools For maintaining the required temperature to ensure optimum briquette quality. Temperature control for pump, cooling unit, fan and pressure switch. Ready-wired for connection – mandatory for operation. Including corresponding control system: €3,990 net Cut-to-Length Device For cutting the briquettes to the required length: €5,750 net Compressed air connection required. Silo for MAP Series €19,970 net Storage silo installed above the machine Capacity: approx. 6 m³ Robust steel construction with agitator discharge system and level sensor Conveyor Line / Cooling Section (Nominal length: 5 × 2 m) €750 net per 2 metres Dedpfxo E Dquo Ab Newc Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Condition: used, Year of construction: 2021, total length: 3,720 mm, total width: 2,300 mm, total height: 2,750 mm, Colour: White Weight: 7.700 kg Price: On request - Year: 2021 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 2102061 - Drive system: CNC - Control system brand: Cybelec - Control system type: Cybtouch-8W - Power [kW]: 11.0 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 135 - Max. working width [mm]: 3100 - Column gap [mm]: 2500 - Throat depth [mm]: 410 - Backgauge depth [mm]: 750 - Max. stroke [mm]: 210 - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 3720mm x 2300mm x 2750mm (l x w x h) - Transport weight [kg]: 7700kg - Transport packages [pcs.]: 1 Dwsdpfxszrgnco Ab Noc Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 17,000 h, Machine in very good condition, only 17.000 hours. Djdpfx Aboz Ayq Eo Njwc Fully functional.

Condition: good (used), Year of construction: 2004, Well-maintained, used press brake from Ermaksan. Type: AP 2600 80 Capacity: 2600 x 80 tons NC control Dwedpfx Ajz Aihmob Nec Includes a set of tooling.

Condition: used, Year of construction: 1988, total length: 1,250 mm, total width: 1,250 mm, total height: 2,400 mm, Colour: Blue Empty weight: 3.000 kg Price: On request - Year: 1988 - Documentation available: No - CE certificate present: No - Serial number: 4441 - Drive system: Conventional - Press model: C-Frame press - Press configuration: Single-acting - Press force [ton]: 50 - Min. stroke [mm]: 0 - Max. stroke [mm]: 85 - Table length [mm]: 440 - Table width [mm]: 700 - Table bore diameter [mm]: 270 - Ram width [mm]: 300 - Max. opening height [mm]: 360 Djdpfx Ajz Avbteb Newc - Height adjustment [mm]: 70 - Pressing speed [mm/s]: 145 - Transport dimensions: 1250mm x 1250mm x 2400mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: reconditioned (used), functionality: fully functional, Press Brake Brand: HACO Capacity: 3000 x 135T Dedpfx Absyapdqs Nowc Distance between uprights: 2600 mm Throat depth: 250 mm Ram stroke: 120 mm Opening: 325 mm Descent speed: 10 mm/s Working speed: 10 mm/s Return speed: 60 mm/s Table height: 915 mm Hydraulic power unit: 10 HP Without pit Supplied with AMADA PROMECAM tooling Backgauge with digital display Weight: 8T Equipped with new tooling

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total width: 2,420 mm, total length: 6,840 mm, total height: 2,600 mm, overall weight: 15,000 kg, type of input current: three-phase, filling opening length: 2,000 mm, filling opening width: 1,980 mm, input voltage: 400 V, empty load weight: 4,950 kg, DGUV certified until: 08/2027, Presto HGS20R Container for roll-off tipper trucks 20 m³ usable volume technically refurbished Dsdozt Nirepfx Ab Newc repainted in desired RAL color hook lift system on both sides discharge door hinged at the top

Condition: used, Year of construction: 2008, functionality: fully functional, The Bruderer BSTA 500-110B is a 500 kN Swiss-built high-speed stamping press, fitted with a BSV 75T double servo feeder for precision two-track strip feeding. Capable of up to 750 strokes per minute with B2 touch-screen control. Including sound insulating cabin. Nominal force: 500 kN (50 tons) Year of manufacture: 2008 Stroke rate: 100–750 spm (variable) Adjustable stroke: 19 / 25 / 34 / 43 / 51 / 57 / 64 mm Ram height adjustment: 64 mm Press table area: 1080 x 650 mm Control: B2, IPC-based touch-screen press control, programmable memory for fast retooling Dwsdpfx Aozh Nnweb Njc BSV 75T DOUBLE SERVO FEEDER Type: tandem dual-feed servo unit, independently controlled tracks Max. strip width: 70 mm per track Max. material thickness: 2 mm Feed length: variable, freely programmable Feed angle: variable Pilot release angle: variable No clamping/gripper bars — strip held by driven feed rollers during stamping Designed for parallel advancing of two strips or feeding pre-profiled/pre-stamped strip

Condition: used, New hose assembly machine, DAEWOO type DA5100-HC Hydraulic hose crimping press, workshop hose crimping press for crimping hose connections Serial no. 25DW06440ALE01, Year of manufacture 2025 Crimping force: 500 tons Crimping range: Ø 1/4 to 2" (15-63 mm) Maximum die opening: approx. 75 mm Pump flow rate: 6 L/min Operating capacity: 200 pieces/hour Hydraulic pressure: 315 bar Motor power: 3 kW Mains connection: 400 volts, 50 Hz - 2 operating modes: manual and automatic - Operation via buttons or foot switch - Crimping stroke adjustment via knurled screw - Short changeover times for conversion to other hose diameters - Crimping jaws are easily inserted into guides and held in place by magnetic force - 10 tool sets, crimping dies (Ø 15, 19, 23, 26, 31, 36, 41, 47, 55, 63 mm) - Cabinet base with hydraulic unit Space requirement L x W x H: 700 x 500 x 1200 mm Weight: 270 kg New - unused Dodpfx Aez Afhpeb Nswc

Condition: good (used), Nagel Citoborma 480AB Paper Drill This machine is in very good condition. It has four drilling heads. Technical specifications: Drill bit distance: 45-285 mm Drill diameter: 2-20 mm Stack height: 60 mm Weight: 275 kg Automatic drilling cycle, controlled by a foot pedal and manual buttons. Sturdy construction on a pedestal. The drill table is adjustable in all planes. Dwsdpfx Abez Dtaas Nec This is one of the newest Citoborma models. Includes operating tools, instructions, and a new cutting stick and drill bits.

Condition: used, Year of construction: 2000, total length: 4,100 mm, total width: 1,900 mm, total height: 3,000 mm, Colour: Blue Weight: 20.000 kg Price: On request - Year: 2000 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 80960 - Drive system: CNC - Power [kW]: 22.5 - Press force [ton]: 300 - Max. working width [mm]: 3600 - Column gap [mm]: 3100 - Throat depth [mm]: 500 - Backgauge depth [mm]: 850 - Max. stroke [mm]: 250 - Tools included: Yes - Transport dimensions: 4100mm x 1900mm x 3000mm (l x w x h) - Transport weight [kg]: 20000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Dwsdozmaa Iopfx Ab Noc

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 7.376.230.761, functionality: fully functional, operating hours: 2,216 h, pressing force: 400 t, stroke length: 365 mm, throat depth: 630 mm, controller model: Durma DT-15, working width: 4,050 mm, TECHNICAL DETAILS Press force: 400 t Max. working width: 4,050 mm Frame spacing: 3,400 mm Overhang: 630 mm Max. stroke: 365 mm Crowning system: CNC-controlled Dwedszzbafopfx Ab Nsc Ram holder: Quick-release system Tool holder type: European style MACHINE DETAILS Drive system: CNC Control system: Durma DT-15 Number of axes: 4 (Y1 + Y2 + X + R) Dimensions & Weight Dimensions (L x W x H): 5,750 x 2,110 x 3,640 mm Weight: 27,760 kg Transport packages: 1 Operating hours: 2,216 h EQUIPMENT Tools Finger guard CE marking CE certificate Documentation Tools

Condition: excellent (used), Briquetting machine POR Oscar 9kW Average briquette output: 130-180 kg Briquette diameter: 70 mm Djdpfxjxdahys Ab Nswc Motor power: 9 kW Feeding hopper diameter: 1170 mm Technical documentation CE mark Machine weight approx. 800 kg

Condition: new, Year of construction: 2026, Actually one showroom machine available. Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant Dsdpjxfwdjfx Ab Njwc . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 681852N, total length: 2,200 mm, total width: 1,450 mm, total height: 1,550 mm, Size: 360 x 520 mm Availability: in stock Total impressions: 49.7 million Estimated model year: 1983 Status: discontinued in 2025 Maximum sheet size: 360 x 520 mm Minimum sheet size: 105 x 180 mm Maximum speed: 8,000 sheets/hour Printing units: 2 Total weight: 2,850 kg Includes: 2 x Varn Kompac III, automatic, continuous dampening system Dwedpoz D Ernefx Ab Nsc Eltek elektrostat P22

Condition: good (used), Year of construction: 2015, functionality: fully functional, bending force (max.): 230 t, number of axes: 5, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Standard equipment: Machine - Robust machine frame in all-steel construction - Press beam, stress-relieved by annealing - Spherical mounting of the press beam with inclination - Electro-hydraulic upper drive with 4-cylinder technology - Generous bending clearance - Flat front covers - Modern block hydraulics Dwsdez D Tnwepfx Ab Nsc - Electronic pressure gauge - Measuring system with glass scale and spring compensation - Hydraulic oil in the machine (lifetime lubrication) - Oil cooler - Control cabinet cooling via air-to-air heat exchanger - Modern machine design Back gauge system - Rear back gauge system, 2 axes, X and R axes - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool holder, manual clamping, hardened - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - Manual crowning Control system - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock frequency - 2 GB RAM - 15-inch touch screen - Network capable - Teleservice via modem Operation - Control panel with LCD keypad and foot switch - Communication bus Safety - Standard safety devices

Condition: ready for operation (used), Year of construction: 1985, machine/vehicle number: 1304, functionality: fully functional, pressing force: 367 t, stroke length: 100 mm, table width: 525 mm, table length: 430 mm, table height: 800 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Buyer is responsible for dismantling and loading! The machine was rebuilt in 2018! TECHNICAL DETAILS Press force: max. 3,600 kN Ram stroke: max. 100 mm Ram adjustment: 40 mm Stroke rate: 40 strokes/min Table area: 430 × 525 mm Table height: 800 mm MACHINE DETAILS Connected power: 7.5 kW Mains connection: 3-phase, 380 V, 50 Hz Control voltage AC: 220 V Dsdszx S E Tjpfx Ab Newc Control voltage DC: 24 V Main motor power: 7.5 kW Oil capacity: 50 l Ambient temperature: +5 °C to +40 °C Average temperature over 24 h: max. +35 °C Humidity: 30–95 %, non-condensing Altitude: 1,000 m above sea level Noise level: ≤ 70 dB Dimensions & Weight Dimensions (W x D x H): 1,200 x 2,000 x 2,400 mm Space requirement: approx. 1,500 mm Machine weight: 8,000 kg Control cabinet dimensions: 800 × 1,200 × 300 mm Control cabinet weight: approx. 100 kg EQUIPMENT Operating manual Testing information Digital documentation Note: Induction unit is not included in the scope of supply.

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 183610114, functionality: fully functional, stroke length: 1,200 mm, empty load weight: 1,500 kg, working width: 3,000 mm, working height: 1,710 mm, No minimum price – guaranteed sale to the highest bidder! Dwodjzzbb Nopfx Ab Nsc TECHNICAL DETAILS Press drive: Hydraulic Max. clamping width: 3,000 mm Max. clamping height: 1,710 mm Max. clamping depth: 100 mm Number of cylinders: 4 pcs Cylinder stroke: 1,200 mm Horizontal and vertical cylinders: Separately controlled MACHINE DETAILS Voltage: 400 V Current consumption: 3.5 A Fuse rating: 16 A Main motor power: 1.5 kW Connected power: 1.5 kW Dimensions & Weight Dimensions (L x W x H): 3,400 x 1,200 x 2,880 mm Unladen weight: 1,500 kg Number of transport packages: 1 pc EQUIPMENT Remote control

Condition: used, Universal temperature control unit REGLOPLAS Type 90M/10/SG75/D K/RT50 Pressurized water temperature control unit with electric heating and connections for external cooling Circulating process temperature control for industrial applications in plastics processing, especially for the temperature control of injection molds and other process tools. Dedpfx Asz Au Hbob Newc Manufacturer's serial number: 102010170001, Year of manufacture: 2009 Temperature: max. 90°C (for water) Heat transfer medium: Water Temperature range: +20°C to 90°C Operating overpressure: max. 6 bar Pump capacity: 100 l/min Tank volume: 2.8 liters (internal filling volume) Heating capacity: 10 kW Cooling capacity of heat exchanger: up to 160 kW (depending on the external cooling unit) Pump motor power: 1.5 kW Continuous sound pressure level

Condition: excellent (used), Self-loading press for gluing Orma LS/ECO/CA 30/13 Working length 3000mm Working width 1300mm Automatic material loading Glue application system Shelves heated with oil to 130C Dwsdjv Nhx Uopfx Ab Njc Top pressure force 57t Side pressure force 9t Year of production 2001 CE certificate

Condition: excellent (used), total length: 3,500 mm, total width: 1,300 mm, overall weight: 7,000 kg, operating pressure: 300 bar, transport length: 4,350 mm, transport width: 1,600 mm, transport height: 2,350 mm, Simimpiantin Shelf Press for Veneering 3500×1300 Shelf length: 3500 mm Shelf width: 1300 mm Two loads Press with 8 cylinders Shelves heated with water from central heating Max. working pressure: 300 bar Piston diameter: 80 mm Machine weight: 7000 kg Dsdpfx Aexxpgbjb Njwc Machine dimensions: 435×160×235 cm (H)

Condition: like new (used), Heidelberg GTOZ-S52 offset printing machine The machine is ready to work, very good condition, purchased from small printing house. Technical data: Format: 36x52cm 2 printing units Weight: 3000kg Power supply: 400V Year of production: 1994 Dwedpjz E A I Ajfx Ab Nsc Baldwin alcohol dampening Control panel Documentation and additional elements included.

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 16232, overall weight: 19,400 kg, type of input current: three-phase, input voltage: 400 V, empty load weight: 4,400 kg, input frequency: 50 Hz, input current: 32 A, operating pressure: 200 bar, oil tank capacity: 60 l, Equipment: documentation/manual, Avermann MPC 16 P/E – 16 m³ | Discharge hatch | Fully rubber-lined For sale: Avermann MPC 16 P/E compaction container, built in 2010, with a capacity of 16 m³. This robustly built Avermann compaction container is specifically designed for applications involving the processing of moist or wet waste streams. The machine is equipped with a discharge hatch and is fully rubber-lined on both the front and rear sides. This makes this compaction container particularly suitable for situations where good sealing is important and where, for example, wet waste, industrial waste, or other moist waste streams are processed. The container is equipped with a hook lift system on the front, making it suitable for transport with a hook arm system. Technical data: Brand: Avermann Type: AVOS MPC 16 P/E Year of construction: 2010 Serial number: 16232 Capacity: 16 m³ Power supply: 400 V / 50 Hz Power: 5.5 kW Fuse rating: 25 A Protection class: IP54 Maximum working pressure: 200 bar Own weight: approx. 4,400 kg Permissible total weight: 15,000 kg Hook lift system on the front Equipped with a discharge hatch Front and rear sides fully rubber-lined Robust industrial construction Special features: Due to the combination of the discharge hatch and the rubber lining, this machine is very suitable for processing wet and moist waste streams. The large feed opening makes it easy to quickly feed larger quantities of waste. The compaction container is in used condition and has signs of wear consistent with its age and use. Technically, it is a heavy-duty and robustly built Avermann compaction container for professional use. Suitable for, among others, industry, food companies, manufacturing companies, catering, recycling and waste processing. Inspection and testing are possible by appointment. Please feel free to contact us for more information, price or technical questions. Keywords: Avermann, AVOS, MPC16, MPC 16 P/E, compaction container, 16m3, waste compactor, container compactor, wet waste, discharge hatch, rubber sealing, rubber-lined, hook lift, waste compaction, recycling, compactor. Dwjdjz Eqzqopfx Ab Njc

Condition: used, Year of construction: 2011, functionality: unexamined, machine/vehicle number: E17423-1, Avermann SSP-80 SIMPLEX stationary screw press | 11 kW | Year of construction 2011 For sale: Avermann SSP-80 SIMPLEX stationary screw press, year of construction 2011. This robust stationary screw press from Avermann is designed for the efficient compaction and transportation of various waste and material streams. The powerful screw continuously transports and compacts the material towards the connected container. The machine is heavy-duty and well-built, making it very suitable for professional use in industries such as manufacturing, logistics, recycling, and waste processing. Technical specifications: Brand: Avermann Type: SSP-80 SIMPLEX Year of construction: 2011 Serial number: E16732-1 Power supply: 400 V / 50 Hz Power: 11.0 kW Connected load: 63 A Dsdpoz Enz Iofx Ab Njwc Stationary design Powerful screw drive Large feed opening Robust industrial construction Details: The machine is in good used condition. The screw and feed side are easily accessible, and the machine is equipped with an integrated electric drive and control system. A screw press has the advantage that the material is continuously fed and compacted. This makes the machine very interesting for companies with larger or constant waste streams that want to significantly reduce the volume. Inspection and testing are possible by appointment. Please feel free to contact us for more information, pricing, or technical questions. Keywords: Avermann, SSP-80, SSP 80, SIMPLEX, screw press, stationary screw press, waste compactor, waste compaction, compactor, recycling, press installation, screw compactor, Schneckenverdichter.

Condition: used, Year of construction: 2011, functionality: unexamined, machine/vehicle number: E17427-1, Avermann SSP-80 SIMPLEX stationary screw press | 11 kW | Year of construction 2011 For sale: Avermann SSP-80 SIMPLEX stationary screw press, year of construction 2011. This robust stationary screw press from Avermann is designed for the efficient compaction and transport of various waste and material streams. The powerful screw continuously transports and compacts the material towards the connected container. The machine is heavily built and very suitable for professional use in various industries, including manufacturing, logistics, recycling, and waste processing. Technical specifications: Brand: Avermann Type: SSP-80 SIMPLEX Year of construction: 2011 Serial number: E17427-1 Power supply: 400 V / 50 Hz Power: 11.0 kW Connected load: 63 A Stationary design Powerful screw drive Large feed opening Dwedjz En A Sepfx Ab Nsc Robust industrial construction Special features: The machine is in good used condition. The screw and feed side are easily accessible, and the machine is equipped with an integrated electric drive and control system. A screw press has the advantage that the material is continuously fed and compacted. This makes the machine very interesting for companies with larger or constant waste streams that want to significantly reduce the volume. Inspection and testing are possible by appointment. Please feel free to contact us for more information, pricing, or technical questions. Keywords: Avermann, SSP-80, SSP 80, SIMPLEX, screw press, stationary screw press, waste compactor, waste compaction, compactor, recycling, pressing system, screw compactor, Schneckenverdichter.