Used Spark Errosion for sale (219)

Condition: ready for operation (used), Year of construction: 2000, operating hours: 70,606 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, input frequency: 50 Hz, Equipment: rotational speed infinitely variable, GAS GENERATOR PLANT – CATERPILLAR 3516 (Complete Package) Complete natural gas power generation package, supplied with main auxiliaries and systems. The unit was operating at full load without issues before shutdown. All maintenance performed by authorized service providers, strictly following the manufacturer’s recommended maintenance schedule. Cjdpfx Asytq Eisknohc Preventive maintenance carried out immediately prior to shutdown (2022): - Inspection/checking of key engine parameters - Bearing lubrication - Oil replacement - Filter changes (oil and air) - Spark plug replacement - Borescope inspection: documentation available Technical specifications: - Electrical output: 1,030 kW - Total operating hours (since new): 70,606 h - Year of manufacture: 1999 - Fuel: Natural gas Scope of supply (included): - Complete genset - Gas train - Control panel - Circuit breaker (alternator + transformer) - Heat exchanger - Silencer - Cooling system (HT aerofan and LT cooling tower) - Lubrication system Availability: Immediately The equipment has already been dismantled and is stored in our warehouse, ready for loading or inspection.

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, grinding length: 600 mm, grinding width: 400 mm, grinding height: 400 mm, grinding wheel diameter: 300 mm, table load: 400 kg, grinding wheel width: 50 mm, overall weight: 3,600 kg, ELB Perfekt 6, year of manufacture 2002, grinding area 600 x 400 mm, grinding wheel 300 x 50 mm, 4 kW spindle power, automatic grinding cycle, roughing, finishing, spark-out, lifting, dresser mounted on spindle head with compensation. The machine has been professionally overhauled by us and now meets the geometry of a new machine. The grinding spindle has new bearings. Accessories: electro-permanent magnetic clamping plate 600 x 400 mm, water tank with paper filter unit. All functions have been tested and the machine can be demonstrated under power at our facility. We are also happy to handle on-site installation and training, as well as future servicing. Financing/leasing is available; we will be pleased to provide an offer! Cjdpfxexdalfj Aknehc

Condition: used, mileage: 280,000 km, power: 330 kW (448.67 HP), first registration: 08/2022, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,350 mm, loading space width: 2,480 mm, loading space height: 2,580 mm, Equipment: ABS, air conditioning, navigation system, parking heater, We are very pleased that our offer has sparked your interest and can assure you in advance that you will be able to purchase a good-value vehicle with a traceable service history from our company! HIGHLIGHTS & PACKAGES * O3J Climate Package, with noise and thermal insulation * U0Q Control Code, HDEP Fuel Efficiency Package - FE1 * O3D Safety Package, without anti-roll stabilization * 1256 Equipment Package: Powertrain 2 * O7L Cab interior package: Chrome * O8I Equipment Package: Economy ASSISTANCE SYSTEMS * S5Z Cruise control system * S1X Active Sideguard Assist * Z1H EBS, Wabco * S1O Traffic Sign Assist * B1B Electronic braking system (EPB) with ABS+ASR * S1L Driver assistance system: Attention Assist (drowsiness detection sensor) * S1W Driver assistance system: Autonomous Emergency Brake Assist (Active Brake Assist 5) * G0T Driver assistance system: Predictive Powertrain Control (cruise control with GPS-based transmission program) * S1H Driver assistance system: Lane Keeping Assist * S1D Driver assistance system: Stability Control Assist * FA28 Driver assistance system: Traffic Sign Recognition * B5D Trailer Stabilization Program TSA * S1I Driver assistance system: Distance Control Codpfsytzx Hsx Aknehc * L1D Driver assistance system: High Beam Assist and Cornering Light * F8W Rain sensor ENGINE, TRANSMISSION & CHASSIS * E7F Remote control for air suspension * G5A Single-plate clutch * O2N Starter Melco 95P65 * U2V Control code, catalyst kit 2 * Z5G Fan position, on the crankshaft * I6X Air suspension, rear axle * C6I Controlled power steering pump * 64203 Differential lock, rear axle * M0E Torque increase, 12th gear * 90220 Air intake behind cab * F3B Cab: steel suspension, comfort * E1T Alternator 100 A, controlled * A3D Rear axle with active lubrication, non-controlled * A2E Rear axle ring gear 440 * M6M Air compressor, 2-stage * M3B Engine 12.8 L - 330 kW inline 6-cylinder diesel (OM 471) * G5G Transmission: Mercedes-Benz PowerShift * C6U Additional stabilizer, rear/pusher axle * G2E Transmission 12-speed, type: G 281-12 * M8D Integrated air intake * M5V Reinforced engine brake * 95020 Engine 12.8 L - 330 kW inline 6-cylinder diesel (OM 471) * A5C Axle ratio i = 2.733 * Z6I Special permit, mandatory for axle transfer * M4X Emission standard EURO 6 * STAB Stabilizer front axle AUDIO & COMMUNICATION * J2U Navigation system * GPS navigation system * J2K Speakers, 2-way system * U3N Control code, navigation map region EU * 42690 Remote query function - Remote Online INTERIOR * D6G Automatic climate control * D8X Low seat box, 40 mm lowered * F5Y A-pillar trim * O1S Interior color: almond beige * O1Z Indirect steering * F2A Floor variant, flat floor * J8Y Preparation for Truck Data Center 7 * J6C Multimedia cockpit, interactive * D5Z Carpet covering, engine tunnel * D7R Overhead storage above windshield with lid * F7X Cab entry: fixed * 17671 Flat cab floor * 33108 Electric sunroof * 44311 Multimedia cockpit, interactive * 47305 Carpet covering on engine tunnel * 47700 Sunblind on side window, driver's door * F1I Cab: L StreamSpace, 2.50 m, flat floor * 51000 Electric window lifters * D3B Lower comfort bunk * LEN5 Multifunction steering wheel * 53707 Seats in cab: Armrests, both sides driver's seat * D1N Seats in cab: Functional passenger seat * D2N Seats in cab: Foldable driver's seat backrest * D7G Storage compartments with lid behind driver and passenger seats * 49584 12V socket in passenger footwell

Condition: used, Spectro Type: SpectroMaxX LMD08 / LMX08 Date: 24.07.2020 Complete analysis using the stationary spark spectrometer SpectroMaxX: With the aid of the spark spectrometer, the alloy content and trace elements of macroscopic solid samples can be determined with high accuracy down to the ppm range. Description of the system: Open spark stand for high sample throughput A wide variety of sample geometries are possible The following elements are available as a basis: Magnesium The analyzable elements and concentration levels depend on the methods available for the respective base element. Usable wavelength range: 170-670 nm Output of measurement values in concentrations or intensities Selectable output units (%, ppm) Output of statistical parameters (mean, RSD) SPECTROMAXx LMX08 Technical specifications: CCD optics: High-resolution CCD multi-detectors Stabilized against temperature fluctuations Effective wavelength range: 140-670 nm, the applicable and configured wavelength range depends on the customer's application requirements. Automated profiling Analysis modules: Freely selectable analysis modules Optimized for customer requirements Expansion with additional modules possible on-site Spark stand: Open spark stand for high sample throughput and various sample geometries Minimized argon consumption through argon-saving module Optimized argon flow Reduced cleaning intervals Spark stand plate easily replaceable Temperature-absorbing design without water cooling Integrated shutter system for optimal plasma view Excitation system: Fully digitized plasma generator with digital discharge definition, digital pulse generation, and digital offline pulse control 32 MHz microcontroller Max. spark duration: 4000 µs Max. spark power 4 kW Display system: Dedicated microcontroller for each CCD Serial interface Spectrometer: External, state-of-the-art computer PC system with Windows operating system Keyboard and mouse Monitoring Software: Codpfozizdtjx Aknehc Spark Analyzer Pro MAX software for analytical operation and calibration Continuous automatic hardware diagnostics in the background Automatic checking and identification of alloy/grade Result manager Online maintenance scheduler Environmental conditions: Room temperature: 10-30°C Conditions: (10-30°C) Relative humidity: 80%, non-condensing Atmosphere: free of corrosive fumes and high dust levels Spectrometer: 90-253 V 50/60Hz Data max. 400 VA during sparking Fuse: 16 A slow-blow Version: Tabletop Depth: 750 mm Width: 625 mm Height: 450 mm Weight: 77 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), Year of construction: 2017, machine/vehicle number: 17002702, Offer 25276 Extraction Filter System / Stationary Filter Unit with Wet Separator Technical Data: - suitable for moist, sticky dusts, metallic grinding - with heavy spark generation - single and multi-station extraction - volumetric flow approx. 5,150 m³/h - water capacity 390 l - drive power 400 V / 7.5 kW - required space W 1250 x H 3650 x D 1100 mm - weight approx. 550 kg Chjdpfex Upd Uox Aknoc

Condition: used, filter area: 42 m², suction capacity: 1,750 m³/h, Suitable for welding, grinding, sandblasting, and all types of dry dust. The filter is pneumatically cleaned by compressed air pulses during operation, ensuring high device efficiency. Fan power: 1.1 kW – single-phase Chodpjy Hhcasfx Aknoc Capacity: 1,750 m3/h Large filtration area – 42 m2 HEPA filter for precise air purification Mechanical spark arrester Stock no.: 1118

Year of construction: 2011, condition: like new (used), Please notice that the entire factory with land and buildings is for sale! List of devices for the pellet production line No. 1 (with a drying line) No. Device name set. Description DRYER LINE: - bale feeder - length 9m - Rotogrin RSC B 36-132 shredder - chain scraper of wet raw material - length 12m - V500 wet raw material screw conveyor - 4 kW - drying cyclone with a rotary dispenser - 4 kW - dryer exhaust fan - 55 kW - a stove with an emergency chimney - 2.2 kW - SBP-2500 dryer drum - 5.5 kW - fuel dosing system with a container + burner - 5.9 kW - ignition detection system - extinguishing system - electrical installation, sensor system, wiring - control cabinet and automation Passat straw chopper 3 x 15 kW Beater mill ANDRITZ OPTI 900 - 250 kW, 3000 rpm JESMA EFF 64/2400 WB filter with fan 4 bar Buffer tank with feeders Conditioner ANDRITZ CM 1101 11 kW, 750 rpm Granulator PM 30 ANDRITZ 315 kW, 1500 rpm Automatic Roller Lubrication System Pellet cooler MOGENSEN G 1014 Screener A set of transport routes for the production line (pneumatic feeders, scraper and bucket conveyors MINIMAX spark detection system with control unit Control panel with software Power and control cabinets, wiring Chsdoim I Ruepfx Aknoc List of devices for the pellet production line No. 2 No. Device name set. Description Bale feeder - Length 9 m Rotogrin RSC B 36-132 chopper Beater mill ANDRITZ OPTI 900 - 250 kW, 3000 rpm JESMA EFF 64/2400 WB filter with fan - 4 bar ANDRITZ CM 1101 conditioner 11 kW, 750 rpm Granulator PM 30 ANDRITZ + lubrication system - 315 kW, 1500 rpm Pneumatic feeders from the hammer mill to the filter Power and control cabinets, wiring

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 390 mm, total height: 2,580 mm, total width: 1,900 mm, overall weight: 2,100 kg, product length (max.): 2,700 mm, number of axes: 5, This 5-axis TOPEDM TSH-400T CNC EDM Spark Erosion Hole Drilling Machine machine was manufactured in 2012. It features an X-axis travel of 400 mm, Y-axis travel of 400 mm, and Z-axis travel of 390 mm. The machine includes a stainless steel table size of 480 × 458 mm and an automatic electrode changer with 21 positions. If you are looking to get high-quality spark erosion hole drilling capabilities, consider the TOPEDM TSH-400T Spark Erosion Hole Drilling Machine EDM we have for sale. Contact us for further details. • Machine head travel: 310 mm • Stainless steel table size: 480 × 458 mm • Work tank size: 670 × 930 × 330 mm Cedpfxjy T Save Aknehc • Max. distance between guide unit and worktable: 315 mm • Electrode diameter: Ø0.15 – Ø6.0 mm • Submersible tank: Yes • Dielectric system: Pressure and deionization control • Max. machining current: 50 A • Max. power consumption: 5 kVA • Electrical data: 380 V, 50/60 Hz, 14.6 A Additional equipment • Automatic Electrode Changer (AEC), 21 positions • Automatic Guide Changer (AGC), 5 guides

Condition: excellent (used), functionality: fully functional, pressing force: 2,000 t, clearance between the columns: 5,100 mm, retraction force: 130 t, HYDRAULIC PRESS LOIRE SAFE mod. EDIMC 2000 Maximum force adjustable slide Ton 200 to 2,000 n. 04 Cylinders Net slide return force Ton 130 Maximum piece dimensions mm 5,000 x 2,800 x 1,700 Maximum piece weight kg 60,000 Upper part weight Kg 35,000 Slide stroke mm 1,500 Maximum clearance between worktops mm 2,500 Minimum clearance between worktops mm 1,000 Front distance between uprights mm 5,100 Lateral distance between uprights mm 2,000 Moving Bolster Front: Chsdpfx Aswlgr Reknoc Front mm 5,000 Lateral mm 2,800 Plan height above zero level mm 650 External stroke mm 4,000 Capacity Ton 60 Slide Plane: Dimensions mm 5,000 x 2,800 Number of guides n° 8 Guide height mm 1,800 Lower blank holder cushion (6 cylinders, force 600-6,000 kN) Upper slide cushion (force 300-3,000 kN) Spark plug diameter (40 mm) and center distances (150x150 / 200x200 mm) Working speed: Minimum mm/sec 3 Maximum mm/sec 110 Approach mm/sec 400 Return mm/sec 350 Stop time ms 219 Safety distance mm 438 Weight without tools kg 365,000 USED MACHINE

Condition: used, This listing is for a Liebherr LCv 4010 Mediline Laboratory Fridge Freezer The unit is in full working condition and is ready for immediate release The Liebherr LCv 4010 MediLine is a combined laboratory refrigerator and freezer designed to provide reliable temperature management for laboratory samples. It features a net capacity of 240 liters for the refrigerator compartment and 105 liters for the freezer compartment. The refrigerator operates within a temperature range of +3°C to +16°C, while the freezer maintains temperatures between -9°C and -30°C. The unit measures 2003 mm in height, 601 mm in width, and 618 mm in depth. The Liebherr range offers constant operation with excellent temperature stability. Built with innovative premium quality and an outstanding design, these units are engineered for low energy consumption, ensuring efficient laboratory function. Liebherr refrigerators are equipped with an advanced controller featuring inbuilt audible and visual alarms as standard. ATEX spark-free models are also available for the safe storage of samples and flammables. Features: ✔ Upright Fridge / Freezer Combi Model ✔ Digital Temperature Display ✔ Forced Air Cooling for the refrigerator ✔ Efficient Refrigeration System Chedpfxoxv D E Hs Aknsc ✔ Temperature Alarm ✔ Temperature stability and consistency (EN 60068-3) ✔ Environmentally Friendly Refrigerants ✔ Defrost: Refrigerator – Automatic ✔ Defrost: Freezer – Manual ✔ 2-Year Warranty This model is equipped with an advanced electronic control system, ensuring precise temperature regulation. It also includes audible and visual alarms to monitor temperature deviations, enhancing sample safety.

Condition: used, This listing is for the Liebherr LKUexv 1610 Mediline Refriderator P48-082 The unit is in full working condition and is ready for immediate release. This is a lab-grade refrigerator designed for high safety applications. Specifically, it’s ATEX 95 / ATEX-certified, meaning the internal design is spark-free and safe for storing flammable or explosive materials. The interior containers are explosion-proof in line with EU Directive 2014/34/EU. Temperature Range The fridge is adjustable between +3 °C and +16 °C, which makes it suitable for a wide variety of lab-stored materials. It uses a digital temperature display (visible from outside) to monitor internal temperature precisely. Size & Capacity External (footprint) dimensions: 820 mm height × 601 mm width × 618 mm depth. Chsdpoxwc Hxefx Aknjc Total gross internal volume: 141 liters, with a net usable volume of 130 liters. Inside it has 3 adjustable shelves (per some spec sheets) for flexible storage. Energy, Cooling, & Refrigerant Energy consumption: about 0.863 kWh per 24h, or ~315 kWh/year. Forced-air (fan) cooling system, which helps maintain a stable internal temperature. Uses R600a (isobutane) as the refrigerant, which is a more environmentally friendly choice

Condition: used, mileage: 284,000 km, power: 315 kW (428.28 HP), first registration: 03/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,722 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, We are delighted that our offer has sparked your interest and can assure you that you will be able to purchase a good and reasonably priced vehicle with a transparent service history from us! MB ACTROS 2540 complete semi-trailer with certified ORTEN Kettliner demountable body Rear cargo securing system 2 x tail lift Trailing axle German vehicle 1st owner Leaf/air suspension Roof spoiler Adaptive cruise control ACC Lane departure warning system LDWS Hill start assist Differential lock Liftable axle Refrigerator Radio/CD/AUX Multi-function steering wheel Electric windows/mirrors ORTEN beverage body, approx. 44 m³ Load compartment dimensions (length x width x height): 7,720 mm x 2,460 mm x 2,300 mm Unladen weight: 12,024 kg Tire size: 295/80 R22.5 Tire 1st axle: 14/14 mm Tire 2nd axle: 11/14 mm Tire 3rd axle: 9/10 mm with 2-axle ORTEN tandem beverage box trailer, approx. 44 m³ First registration: 03/2019 ABS EBS Air suspension Disc brakes SAF axles Tail lift Unladen weight: 5,850 kg Permissible total weight: 18,000 kg Permissible payload: 12,150 kg Load compartment dimensions (length x width x height): 7,720 mm x 2,460 mm x 2,300 mm Tire size: 385/65 R22.5 Tire 1st axle: 8/14 mm Tire 2nd axle: 4/11 mm GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We organize your registration and the export documents / EUR 1 and manufacturer's declaration for export. FINANCING Upon request, we will gladly provide you with a LEASE-PURCHASE or FINANCING OFFER. SERVICE TÜV/HU inspection / UVV tail lift / LGS inspection / Tachograph inspection / Installation of OBU device and service by our AUTHORIZED WORKSHOP before departure. TOLL / ROAD CHARGES Toll can be booked on site. TRAVEL / DISTANCES Wittlich train station is 500 m away Frankfurt Airport is 150 km away Frankfurt-Hahn Airport is 40 km away Chjdpfxozwzlaj Aknsc Luxembourg Airport is 75 km away Sale in accordance with our general terms and conditions. The information on the Internet is a non-binding description. It does not constitute guaranteed characteristics. The seller is not liable for typing and data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: ready for operation (used), Year of construction: 2016, Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A++, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault despite sufficient oil being present, and it also shuts down with the message 'engine too hot'. The control unit was overhauled by the manufacturer in 2024, and regular maintenance intervals for oil changes, spark plugs, valves, etc. have been carried out. With documentation. Chedpfxoxc Ni Re Aknec

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, controller manufacturer: AGIE, number of axes: 3, This 3-axis AGIE Hyperspark 2 Exact with Erowa was manufactured in 2005. It features an X-axis travel of 350 mm, Y-axis travel of 250 mm, and Z-axis travel of 250 mm. The machine is equipped with AGIE VISION 4 Software and includes an EROWA ROBOT MULTI with 60 ITS 148 places and 240 ITS 50 magazine places. If you are looking to get high-quality die-sinking EDM capabilities, consider the AGIE Hyperspark 2 Exact machine we have for sale. Contact us for further details. Chedpfx Akoy S A Dconec • EROWA ROBOT MULTI with 60 ITS 148 Places and 240 ITS 50 Magazine Places

Condition: ready for operation (used), functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 13 A, input frequency: 50 Hz, suction capacity: 6,300 m³/h, intake manifold diameter: 500 mm, noise level: 72 dB, overall weight: 565 kg, The UFO-4-M/N filtering unit is applied for cleaning the dust laden air from impurities arising during the manufacturing processes. It is irreplaceable in capturing the dry dust, formed during welding, grinding the non-sparking materials, gas- or plasma metal cutting and other dust-emitting processes, in chemical, pharmaceutical, plastic industry, and others. Maximum temperature of the forwarded air is +60°C. The appliances are equipped with cartridge filters, capturing dust on the outer filter surface. The accumulated dust (on the filters) is struck off by cyclical compressed air impulses. Csdpfx Akezmfuqenohc Filter is fully complete and in excellent condition.

Condition: refurbished (used), functionality: fully functional, grinding length: 630 mm, grinding width: 230 mm, total height: 1,650 mm, total length: 1,535 mm, total width: 1,770 mm, grinding height: 360 mm, feed rate X-axis: 2 m/min, feed rate Z-axis: 20 m/min, grinding wheel diameter: 400 mm, table load: 180 kg, rotational speed (max.): 3,220 rpm, power: 1.5 kW (2.04 HP), disc diameter: 250 mm, Retrofit of Surface Grinding Machine TOS BSKF 20 NC with SCHNEIDER Control System - Machine is fully dismantled and retrofitted Standard Accessories: - 2-axis cycle control, manufactured by Schneider-Electric Functions: Infeed, Spark-Out, Dressing, and Compensation - Grinding wheel 250 x 20 x 76 mm - Grinding wheel flange - Electro-magnetic chuck 600 x 200 mm - Automatic feed on Y and Z axes - Diamond dresser holder (without diamond) - Coolant system with settling tank - Machine lamp - Centralized lubrication - Operating tools - Operating manual - CE declaration - Inspection report Chjdsxf Ez Uepfx Aknoc Included: Transport and packaging On-site relocation with crane/forklift Commissioning Travel and accommodation expenses Accessories: - Partial enclosure - Single-point diamond, 0.75 ct - Balancing arbor with nut and wrench - Grinding wheel balancing stand - Set of levelling elements - Oil filling

Condition: used, mileage: 200,000 km, power: 427 kW (580.56 HP), first registration: 02/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, loading space length: 8,100 mm, loading space width: 2,470 mm, loading space height: 2,191 mm, Equipment: ABS, air conditioning, navigation system, parking heater, tail-lift, We are very pleased that our offer has sparked your interest and can assure you that you will be able to purchase a good and affordable vehicle with a transparent service history from us! Certified BÖSE tilting platform body Rear cargo securing system / 8-point system each!!! LBW BÄR 2,500 KG Truck 20 pallets (L: 8,100 x W: 2,470 x H: 2,191 mm) Pallet truck box EURO 6 D MAN D38 engine with 15,256 cm³ displacement (THE BEST ENGINE!) Trailing axle RETARDER Aluminum rims GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We will arrange your registration and export documents / EUR 1 and manufacturer's declaration for export. FINANCING Upon request, we will gladly provide you with a LEASE-PURCHASE or FINANCING offer. SERVICE Codpfx Akjzwi T Sonshc TÜV / UVV LBW / LGS inspection / Tachograph inspection / Installation and service of OBU device by our AUTHORIZED WORKSHOP before departure. TOLL / ROAD TOLLS Toll can be booked on site. ARRIVAL / DISTANCES Wittlich train station is 500 m away Frankfurt Airport is 150 km away Frankfurt-Hahn Airport is 40 km away Luxembourg Airport is 75 km away Sale in accordance with our general terms and conditions. The information on the Internet is a non-binding description. It does not constitute a guarantee of quality. The seller is not liable for typing and data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: used, Year of construction: 1995, Technical details: number of spindles: 6 Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SFH130 Yob: 1995 six-spindle automatic lathe 6 main spindles as a chucker automatic lathe control Siemens S7-200 PLC Dnt drive loading and disloading in position 6 Codpfx Akjw Hbz Aenjhc additional cooling pump with magnetic spark plug filter Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, This listing is for the Labcold RLPR0517 150L Under-counter laboratory refrigerator The unit is in full working condition and is ready for immediate use The Labcold RLPR0517 is a 150 litre under-counter laboratory refrigerator with a spark-free interior, meaning all potential ignition sources (like internal electrical components) are placed outside the storage chamber. This makes it significantly safer for storing substances that might give off flammable vapours (with appropriate risk assessment). Csdpfx Aoyi Tmnjknehc Capacity: ~150 litres suitable for reagents, samples or general laboratory use. Style & Size: Undercounter design with external dimensions approx. 835 mm (H) × 600 mm (W) × 600 mm (D). Temperature Range: Maintains between 0 °C and +10 °C; factory set point usually around 5 °C. Interior: Powder-coated steel to ensure durability, ease of cleaning and safety. Shelving: Includes 3 adjustable shelves to organise contents. Defrost: Off-cycle automatic defrost helps maintain performance and reduces frost build-up.

Condition: used, grinding diameter 660 mm grinding length 2000 mm workpiece weight 1500 kg grinding wheel diameter 400 mm control X-As. Diatos 602 total power requirement 12/22/30 kW Cedpfjyqtg Dox Aknjhc Including: With Diamant Wheel / Plunge Grinding With Spark out / Face Grinding The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: refurbished (used), functionality: fully functional, Year of construction: 2022, SENFENG SF3015HM – 4kW Combination Fiber Laser – 2022 The SENFENG SF3015HM, year 2022, is a versatile combination fiber laser cutting machine for both sheet metal and tubes/profiles. The machine originates from a company bankruptcy and will be supplied by Besten Machines after a complete inspection and maintenance service. Installation and commissioning at the customer's location can also be provided. Equipped with an Raycus 4,000 W fiber laser source, Raytools BM06K FL200 cutting head and KaiSen KSDC-8604A1 extraction system. Year of manufacture: 2022 Guide price: €85,000 EXW Haarle (NL) or Büren (DE). Main Features Combination machine for sheet and tube cutting Year of manufacture: 2022 3,000 × 1,500 mm exchange table Tube processing up to 6,000 mm IPG YLR 4,000 W fiber laser source Raytools BM06K FL200 cutting head CypCut software for sheet cutting TubePro software for tube cutting Fully enclosed machine CNC-controlled extraction zones KaiSen KSDC-8604A1 extraction unit included Water chiller and power stabilizer Automatic lubrication system Chedpjzwqw Sofx Aknjc Wireless remote control Technical Specifications Model: SENFENG SF3015HM Year of manufacture: 2022 Laser power: 4,000 W Raycus Sheet working area: 3,050 × 1,525 mm Z-axis: 220 mm Exchange table: 3,000 × 1,500 mm Tube length: 500–6,000 mm Square profiles: 15 × 15 – 150 × 150 mm Maximum profile range: up to 220 × 220 mm Maximum acceleration: 1.0G Maximum simultaneous axis speed: 130 m/min Positioning accuracy: ±0.05 mm/m Repeatability: ±0.02 mm/m Maximum sheet weight: 700 kg per table Power supply: 380 V / 50 Hz Machine dimensions: approx. 8,480 × 3,735 × 2,255 mm Machine weight: approx. 9,304 kg Cutting Capacity Sheet metal: Steel S235: up to 20 mm Stainless steel: up to 10 mm Aluminium: up to 4 mm Tube & profiles: Steel S235: up to 8 mm Stainless steel: up to 6 mm Aluminium: up to 4 mm KaiSen Extraction System The included KaiSen KSDC-8604A1 extraction unit has a capacity of approx. 6,800 m³/h and is equipped with four self-cleaning filter cartridges, spark pre-filter and automatic blowback cleaning. Condition & Delivery Year of manufacture: 2022. The machine originates from a company bankruptcy and will receive a complete maintenance service and technical inspection before delivery. Installation and commissioning by Besten Machines at the customer's location can be provided upon request. Guide price: €85,000 EXW Haarle, Netherlands or Büren, Germany. An attractive opportunity for companies looking for a modern 4kW combination fiber laser for both sheet and tube processing at a significantly lower investment than a new machine. Contact Besten Machines for further information, availability, inspection or an installation quotation.

Condition: used, mileage: 300,000 km, power: 294 kW (399.73 HP), first registration: 04/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,722 mm, loading space width: 2,480 mm, loading space height: 2,190 mm, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, We are delighted that our offer has sparked your interest, and we assure you that you will be able to purchase a good, reasonably priced vehicle with a verifiable service history from us! MB ACTRO 2540 COMPLETE ARTICULATED TRUCK with certified BÖSE swing-wall bodies Rear cargo securing system 2 x LBW BÄR 2,500 KG (tail lift) Trailing axle RETARDER Special equipment: Front axle load 8.0 t, Airbag driver's side, Work lights, Audio system: CD radio Comfort (Bluetooth), Exhaust outlet downwards to the right, Standard and DuoMatic brake connection, Compressed air connection in the cab, High-pressure compressed air unit, Compressed air horn, Electrical system and lights for swap body frame, Cab: with air suspension, Tinted windshield, Vehicle without trailer coupling, 12.7 cm info display with video function, 3-part fenders, Fuel tank: 290 L aluminum, Cool box / refrigerator, LM rims 9.00x22.5 (ALCOA matte), Roof air deflector (lockable), 2-cylinder air compressor, Reinforced engine brake, Steerable trailing axle, Tire pressure control system, Retarder, Acoustic reversing warning (external warning signal), Switch for loading platform, Reinforced rear cross member, Fleet management system interface, Fuse box, Seats in the cab: passenger seat armrest, Seats in the cab: driver's seat comfort suspension seat, Exterior sun visor, Side window sunblind, Driver's door, 12V socket in the passenger footwell, Additional 12V socket, 24V / 25 A socket in the passenger footwell, 24V socket in storage compartment on the right, Automatic daytime running lights, Preparation for rear view camera Additional equipment: Emission standard EURO 6, Axle configuration: 6x2, Actros 4, Trailer brake 2 - line, Connections on the left, Trailer socket 24V / 15-pin, Exterior mirrors electrically adjustable and heated, Differential lock rear axle, Steel compressed air tank, Driving assistance system: Attention-Assist (fatigue detection sensor), Driving assistance system: Brake Assist (Active Brake-Assist), Driving assistance system: Lane keeping assist, Cab: width 2.30 m, Cab: L StreamSpace, Cab floor with engine tunnel 320 mm, Suspension: Air / Air (full air), Electric windows, Generator 100 A, Gearbox 12-speed - Type: G 211-12, Urea tank (AdBlue): 60 L, Rear axle bevel gear 440, Body / Structure: Chassis, Lower comfort bunk, Comfort locking system, Communication interface, Radiator grille, Controlled steering pump, Engine 10.7 L - 290 kW R6 Diesel (OM 470), Engine compartment encapsulation, Trailing axle single-tired, Ramp mirrors, Waste heat recovery, Disc brakes front and rear axle, Seat cover / upholstery: fabric, Seats in the cab: passenger function seat, Seats in the cab: driver's seat backrest foldable, Voltage converter 24V / 12V 10 A, Splash guard front, Stabilizer front axle, Additional stabilizer, Rear axle / trailing axle, Stowage flap outside left, Cab socket 24V, Tachograph / EC control unit, Door extension for cab, Underbody paneling aerodynamically shaped, Underrun protection front, Preparation for CB radio, Preparation for toll collection, Front axle angled, Controlled water pump, Permissible total weight 25.00 t, Auxiliary heater (water) GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We will organize your registration and the export documents / EUR 1 and manufacturer's declaration for export. FINANCING If desired, we will be happy to provide you with a LEASING, HIRE PURCHASE or FINANCING offer. SERVICE TÜV / MOT Chjdpfx Aksxy D Tfonoc

Condition: new, functionality: fully functional, grinding wheel diameter: 400 mm, Equipment: documentation/manual, Impeller mounted on ball bearings ensures quiet, smooth operation and long service life. Powerful drive motor with high torque. Adjustable guards made of durable plastic provide effective spark protection. Standard equipment includes 35 mm suction nozzles, with provision for dust extraction connection. Robust, modern design and a very wide range of additional accessories. Adjustable workpiece support rests. Modern LED lighting. Large spark protection covers. Bases shown in the photos are optional equipment available at extra cost. Technical Specifications Disc/wheel diameter: 400 mm Disc/wheel thickness: 50 mm Disc/wheel bore: 127 mm Disc/wheel grit: G 36 / G 80 Maximum rotational speed: 1450 rpm Motor power: 7.5 kW Motor power S1 100%: 5.5 kW Voltage: 400 V Dimensions - width: 745 mm Dimensions - depth: 540 mm Dimensions - height: 510 mm Cjdpfxjyt Hvwo Aknohc Weight approx.: 114 kg

Condition: excellent (used), grinding diameter 155 mm grinding length 400 mm centre height 80 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : STUDER (CH) Universal Precision Cylindrical Grinding Machine Model S 20-12 Year Height of centers / Grinding Ø 80 / 160 mm Center distance / Grinding length Z-axis 400 / 420 mm Internal Grinding Ø mm Workpiece weight flying / between centers max. 5 / 20 kg Table speeds 0,1 – 3,5 m/min Table way automatic, min. 1 mm Table swivable max. 30 ° Universal Grinding Head cross way max 170 mm Rapid infeed way 30 mm Infeed way 1,9 mm Feeds 0,001 – 0,04 mm/Ø Swivable 10 / 30 ° Grinding wheel dimension : bore x width x Æ 127 x 30 x 300 mm Internal Grinding device separately mounted mm Workhead Fitting taper/conus MK 2 Speeds 60 – 1.200 rpm Spindle drive 2,2 kW Total electric load approx.. 5 kW - 400 V – 50 Hz Weight approx. 1.000 kg Accessories / Special Features: • Electrohydraulic conventional control with PHILIPS Digital Readout for the infeed (x-axis) Chsdpszbczxefx Aknsc • Preinstalled automatic cycles for plunge-in grinding, traverse grinding, internal grinding with roughing, finishing, fine-finishing, spark-out • Separately mounted Internal Grinding Device with belt-driven internal grinding spindle • Workhead with Quck-release collet chuck, swivable 90° • (right now the machine is not equipped with a tailstock, an original STUDER tailstock; used can be supplied for approx.. EUR 5.000,--) • Wet grinding equipment with coolant filtration unit, separate electric cabinet, manuals Condition : Very good ! Universal machine for all sorts of grinding tasks ! Video : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, before loading

Condition: refurbished (used), TECHNICAL SPECIFICATIONS Rotary table diameter: 600 mm Magnetic plate diameter: 600 mm Segment holder (or diamond grinding wheel) diameter: 430 mm Maximum grinding height: 400 mm Table rotation speed, continuously adjustable: 1-20 rpm Vertical automatic increments: 0.001 mm Spindle motor power: 37 kW Grinding spindle speed, continuously adjustable: 500-1000 rpm Maximum load on table: 900 kg Net machine weight: approx. 7500 kg Power supply: 400 V +/- 5% 3 Phases, 50 Hz Control circuit voltage = 24 V DC TECHNICAL DESCRIPTION • Frame and uprights made of electro-welded, thermally stabilized steel, with high rigidity and reinforcing ribs. Vertical movement of the spindle head • Precision linear slides • Vertical movements of the grinding wheel head via high-precision ball screws + YASKAWA brushless shaft motor • Vertical movements of the grinding wheel head via electronic handwheel. • Minimum programmable value = 0.001 mm. • Display showing the vertical position of the grinding wheel head, 0.001 mm resolution Transverse movement of the rotary table • Precision linear slides • Transverse movement of the rotary table via high-precision ball screws + YASKAWA brushless shaft motor. • Transverse table movements via electronic handwheel. • Minimum programmable value = 0.001 mm. Chodpfex N I A Sjx Aknec • Display showing the vertical position of the grinding wheel headstock, 0.001 mm resolution. Spindle Motor • Coaxial spindle with drive motor • Balanced 37 kW spindle motor, without drive belt or coupling. • Frequency converter for continuously variable spindle speed and rapid braking of the spindle motor at the end of the cycle. Rotary Table • Cast iron rotary table with hydrostatic slides. • Drive via Siemens brushless motor • Continuously adjustable table speed from 1 to 20 rpm STANDARD EQUIPMENT • Electropermanent magnetic chuck, 600 mm diameter with parallel poles, complete with electronic control and attraction force adjustment • Electronic handwheel for manual movement of the vertical and transverse axes. • LODI CNC Type T 2000 • Encoder-based measuring system for the vertical and transverse axes. Resolution = 0.001 mm • Automatic cycle with different feed rates for the various cycle phases: roughing, finishing, and sparking. • Cast iron rotary table with hydrostatic slides • Rotary table speed continuously adjustable by brushless motor • Frequency converter for continuous spindle speed adjustment and rapid spindle motor braking. • Coolant system with external collection tray. • External lubrication unit for automatic lubrication of all moving parts. • Complete segment holder (flange) with a set of segments + grinding wheel holder for diamond grinding wheel • Complete work area enclosure with sliding door • Work lights • Set of service wrenches • Documentation in French (1x printed, 1x on DVD) • CE Certificate Lubrication • External lubrication system for lubricating all moving parts. Watering System • Watering system including protective plates and hoses, including a settling tank outside the machine (without filter) Enclosure • Full enclosure with manually operated sliding door CNC Control LODI T2000 type CNC for managing and controlling the machine's axis movements. Automatic work cycle for grinding parts.