Used Spark Errosion for sale (211)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1978, load capacity: 800 kg, lifting height: 2,500 mm, fuel type: gas, gearing type: mechanical, fork length: 1,200 mm, rear tire type: pneumatic tires (air-filled), total height: 1,850 mm, total length: 2,950 mm, total width: 850 mm, Equipment: UVV, full service history, Toyota FG-7 Forklift, 800 Kg - last UVV and emissions test 04/2026 Toyota gas-powered forklift for enthusiasts: Very well-maintained and 100% functional. The forklift has always been stored in a dry machine hall. Due to its low height of only 1.85m, it can pass through almost any door. It starts, drives, brakes, lifts, and tilts perfectly. Functional video (04/18/2026) available - link upon request. Year of manufacture: 1978 Forklift height: 1.85m Load capacity: 800 Kg Lifting height: 2.5 m UVV inspection: NEW Emissions test: NEW Unbelievable, but true: This little helper was purchased in 1978 from Stapler-Center Heidenescher in Melle and has since been demonstrably subjected to all regular maintenance, repairs, UVV inspections, and emissions tests by Stapler-Center Heidenescher in Melle. Honest history: • Original inspection book from 1978 available • All inspection reports since 1978 available • All work reports since 1978 available Ledpfx Ajy Uvzgol Tshh The last maintenance was recently carried out by Stapler-Center Heidenescher in Melle in 04/2026: • Battery renewed • Air filter renewed • Spark plugs renewed • Oil filter and oil renewed • Freeze plugs renewed • Distributor cap renewed • Oil change performed • Emissions test performed • UVV inspection performed The nameplate has been missing for several years (this was noted in the inspection reports). Fuel gas (propane gas cylinder): The fuel gas cylinder shown in the photos/video and currently installed is a rental cylinder and is NOT included in the offer/scope of delivery. If desired, a partially filled cylinder can be taken over. PICKUP (preferred): Pickup in D-32107 Bad Salzuflen. DELIVERY: Delivery within a radius of 50 km around 32107 Bad Salzuflen is possible, subject to cost coverage (travel costs: 1.65/km; travel/working time: 85 EUR/hour). COMMERCIAL SALE: The stated pickup price is a gross price including the statutory VAT of currently 19%. You will receive a proper invoice with VAT shown upon purchase. NOTE regarding warranty/guarantee: This item demonstrably comes from a business liquidation. Items that demonstrably come from a business liquidation can be inspected on site and tested for functionality to the extent possible. The following applies: bought as seen/inspected - excluding any warranty/guarantee claims against the seller. Errors and omissions excepted.

Condition: used, mileage: 200,000 km, power: 427 kW (580.56 HP), first registration: 02/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, loading space length: 8,100 mm, loading space width: 2,470 mm, loading space height: 2,191 mm, Equipment: ABS, air conditioning, navigation system, parking heater, tail-lift, We are very pleased that our offer has sparked your interest and can already assure you that you will be able to purchase a good and affordable vehicle with a transparent service history from us! Certified BÖSE tilting side wall body Rear cargo securing system / 8 tie-down points each!!! 2 x LBW BÄR, each with a capacity of 2,500 kg Truck: 20 pallets (L: 8,100 x W: 2,470 x H: 2,191 mm) Trailer: 18 pallets (L: 7,300 x W: 2,470 x H: 2,191 mm) Pallet jack compartment EURO 6 D MAN D38 engine with 15,256 cm³ displacement (THE BEST ENGINE!) Trailing lift axle RETARDER Aluminum rims Lsdpfx Aey T T N Esl Tjhh GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We will organize your registration and the export documents / EUR 1 and manufacturer's declaration for export. FINANCING Upon request, we will be happy to provide you with a LEASE-PURCHASE or FINANCING OFFER. SERVICE TÜV / HU (technical inspection) / UVV LBW (occupational safety inspection) / LGS inspection (load securing inspection) / Tachograph inspection / Installation of OBU (on-board unit) and service by our AUTHORIZED WORKSHOP. TOLL / ROAD CHARGES Toll can be booked on site. ARRIVAL / DISTANCES Wittlich train station is 500 m away Frankfurt Airport is 150 km away Frankfurt-Hahn Airport is 40 km away Luxembourg Airport is 75 km away Sale in accordance with our general terms and conditions. The information on the internet is a non-binding description. It does not constitute guaranteed characteristics. The seller is not liable for typographical and data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: used, mileage: 484,000 km, power: 350 kW (475.87 HP), first registration: 01/2021, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, loading space length: 7,700 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, We are very pleased that our offer has sparked your interest and can already assure you that you will be able to purchase a good value and competitively priced vehicle from us, complete with a fully traceable service history! Special Equipment: Axle load measuring device, LED ambient lighting (driving and living areas), Trailer Stability Assist TSA, 2-line trailer brake, work lights, lowered exhaust system, Economy package, Climate package, Safety package, dual air horns on the cab roof, Turning Assistant, High-beam Assist and cornering light, cab with shaving mirror, vehicle without trailer coupling, vehicle without exterior mirror camera (MirrorCam), regulated 150 A alternator, 12-speed transmission - type: G 281-12, notebook holder, Comfort telephony (Bluetooth) with inductive charging tray, wide upper comfort bed, 3-piece mudguard, 3-piece mudguard with splash guard, 500 L aluminum fuel tank (left), additional 500 L aluminum tank (right), refrigerator/cool box, integrated air intake, roof air deflector, 2-cylinder air compressor, illuminated Mercedes star, reinforced engine brake, Premium Comfort mattress (lower), 4900 mm wheelbase variant, 2250 mm rear overhang, rain sensor, retarder, reversing alarm with acoustic warning and external warning light, electric sliding/tilting glass sunroof, two (2) additional remote control keys, fleet management system interface, storage drawers under the ledge, passenger seat upholstery: velour, driver’s seat upholstery: velour, driver’s cab seats: comfort suspension seat, driver’s cab seats: SoloStar Concept, electric sunblind for windshield, 11.75x22.5 steel wheels (front axle), left external storage compartment, 24V / 25A socket in passenger footwell, preparation for four surround cameras (display on dashboard monitor), preparation for additional headlights, sleeper curtain Additional Features: Lsdpfxeyumx Uo Al Tjhh EURO 6 emission standard, storage above the windshield with cover, axle configuration: 6x2, front axle load 8.0 t, Actros 5, Actros L-cab, heated approach/front mirror, 24V / 15-pin trailer socket, exhaust on right-hand side, Powertrain 2 package, side-by-side batteries, rear axle differential lock, 12th gear torque increase, compressed air connection in cab, steel air tanks, high-level air unit, air unit with condensate monitoring, automatic driving light activation (light sensor), Attention Assist (drowsiness detection sensor), Autonomous Emergency Brake Assist (Active Brake Assist 5), Lane Keeping Assist, fixed entry cab, chrome interior package, hydraulic cab tilting gear, L GigaSpace cab, 2.5 m wide, level cab floor, steel-sprung cab, comfort, LED outline marker lights, full air suspension, electric window lifters, tinted windshield, vehicle without rear window, speed limiter system, AdBlue tank: 60 L, rear axle with active lubrication (unregulated), rear axle ring gear 440, body/chassis: chassis, lower comfort bed, comfort locking system, electronically controlled power steering pump, multifunction steering wheel, heated air dryer, 12.8 L - 350 kW R6 diesel engine (OM 471), OM 471 engine variant, liftable trailing axle 7.5 t, application: local distribution, wheelbase...

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 174146, fuel type: gas, color: blue, power: 10,000 kW (13,596.20 HP), nominal power: 10,000 kW (13,596.20 HP), nominal power (apparent): 12,163 kVA, 10MW Wärtsilä AMG Gas Power Plant with Heat Recovery Primary Power Generation: Wärtsilä W20V34SG Gas Engine - Output: 10,000 kW (10 MW) - Configuration: 20‑cylinder, spark‑ignited gas engine - Fuel: Natural gas - Year: 2013 Electrical Generation: AMG 1120LT08 DSE Generator - Rating: 12,163 kVA - Year: 2013 Lhodpeygx Tzsfx Al Tsh Heat Recovery System: Cochran Waste Heat Boiler - Thermal Output: 17,500 kW - Year: 2013 Cochran Economiser – Waste Heat Recovery Unit - Thermal Output: 2,719 kW - Year: 2013

Condition: used, mileage: 288,000 km, power: 294 kW (399.73 HP), first registration: 04/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,470 mm, total height: 2,210 mm, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, We are delighted that our offer has sparked your interest and can already assure you that you can purchase a good and affordable vehicle with a verifiable service history from us! MB ACTROPS 2540 COMPLETE TRUCK with certified BÖSE tilting side wall bodies Rear cargo securing system 2 x LBW BÄR 2,500 KG Trailing axle RETARDER 2 x L 7,715 x W 2,470 x H 2,210 mm internal dimensions Special equipment: Front axle load 8.0 t, airbag on the driver's side, work spotlights, audio system: Comfort CD radio (Bluetooth), exhaust pipe downwards to the right, brake connection standard and DuoMatic, compressed air connection in the cab, high-pressure compressed air unit, compressed air horn, electrical system and lighting for interchangeable body frames, cab: with air suspension, tinted windshield, vehicle without trailer coupling, info display 12.7 cm with video function, 3-part fender, fuel tank: 290 liters aluminum, cooler box / refrigerator, aluminum rims 9.00x22.5 (ALCOA matte), roof air deflector (lockable), 2-cylinder air compressor, reinforced engine brake, steered trailing axle, tire pressure control system, retarder, acoustic reversing warning (external warning signal), switch for loading platform, reinforced rear cross member, interface for fleet management system, circuit breaker, seats in the cab: passenger seat armrest, seats in the cab: driver's seat comfort suspension seat, external sun visor, side window roller blind, driver's door, 12V socket in the passenger footwell, additional 12V socket, 24V / 25 A socket in the passenger footwell, 24V socket in storage compartment on the right, automatic daytime running lights, preparation for reversing camera Additional equipment: Emission standard EURO 6, axle configuration: 6x2, Actros 4, trailer brake 2 - line, connections on the left, trailer socket 24V / 15-pole, exterior mirrors electrically adjustable and heated, differential lock rear axle, steel compressed air tank, driving assistance system: Attention-Assist (fatigue detection sensor), driving assistance system: Brake Assist (Active Brake-Assist), driving assistance system: Lane Keeping Assist, cab: width 2.30 m, cab: L StreamSpace, cab floor with engine tunnel 320 mm, suspension: air / air (full air), power windows, generator 100 A, gearbox 12-speed - type: G 211-12, urea tank (AdBlue): 60 liters, rear axle bevel gear 440, body / structure: chassis, lower comfort bunk, comfort locking system, communication interface, radiator grille, regulated steering pump, engine 10.7 liters - 290 kW R6 diesel (OM 470), engine compartment encapsulation, single-tired trailing axle, ramp mirrors, waste heat recovery, disc brakes front and rear axle, seat cover / upholstery: fabric, seats in the cab: passenger seat with multiple functions, seats in the cab: driver's seat backrest foldable, voltage converter 24V / 12V 10 A, front splash guard, front axle stabilizer, additional stabilizer, rear axle / trailing axle, access flap on the outside left, cab socket 24V, tachograph / EC control unit, door extension for cab, underbody paneling aerodynamically shaped, underrun protection at the front, preparation for CB radio, preparation for toll collection, front axle with increased steering angle, regulated water pump, permissible total weight 25.00 t, auxiliary heater (water) Lhsdpsy Tgmksfx Al Tjh GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We will organize your registration and the export documents / EUR 1 and manufacturer's declaration for export. FINANCING If desir

Condition: used, Year of construction: 1981, machine/vehicle number: 800 02 81 46, type of input current: three-phase, Specialized EDM drill (eroding machine / hole starter EDM machine) Ljdoy Su Iyspfx Al Tjhh This machine is primarily used in metalworking as a hole starting EDM machine or for spark eroding the removal of broken tools (such as taps, drills, or reamers) from valuable workpieces. This is done with extreme precision without damaging the surrounding thread or material.

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Perkins 2806J-E18TAG1, General information Field of application: Construction Weights Empty weight: 6.740 kg Functional Generator capacity: 550 kVA Dimensions of cargo space: 542 x 204 x 243 cm CE mark: yes Other information Fuel consumption: 94.5 Liter / Hour at 75% Load Generator: LL6114K Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 1125 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery Ljdpfxjw A E T Uj Al Tjhh - Control Panel - Steel canopy - Tank = Remarks = EU STAGE 5 Compliant 50/60 Hz switchable frequency via terminal link 550 kVA Prime power Spark arresting silencer

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 25400 € 485.14 € 1250x2500 mm HYPERTHERM Powermax 45 XP 6 mm 12 mm 25 mm 4 mm 45 A 45 A 50 % ED, 32 A 100 % A 24 m/min 1/10 mm 470 l 500 kg/m² 3060 mm 1760 mm 1500 mm 500 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 XP CNC-workbench software (external PC not included) height adjustment by arc voltage set-up laser precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules ALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 Sync plasma type comp. air comp. air comp. air comp. air plunge power 16 mm 20 mm 22 mm 25 mm seperating cut 32 mm 38 mm 50mm 57mm recommended thickness (unalloyed steel) 6 mm 16 mm 19 mm 22mm max. thickness (unalloyed steel) 16 mm 20 mm 22 mm 25 mm price € 26.900,- € 28.400,- € 29.900,- € 32.800,- OPTIONS: water tank to quickly fill and drain thetrough € 2.870,- pneumatic marking pin € 770,- pneumatic engraver € 1.920,- suction bridge (prepared for suction diam.160mm, important for galvanized and thin sheets) € 1.020,- Lodpfx Ajwiryuol Tohh suction- and filter unit Caremaster IFA 1,1 kW, fan power 2.500 m³/h € 2.950,- higher gantry 200 mm € 710,- higher gantry 300 mm € 900,- automatic nesting € 500,- PlasmaScan camera system € 830,- ohmic contacting for MaxPro200 € 280,-

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 23200 € 445.44 € 1000x2000 mm HYPERTHERM Powermax 45 XP 6 mm 12 mm 25 mm 4 mm 45 A 45 A 50 % ED, 32 A 100 % A 24 m/min unter 1/10 mm 300 l 400 kg/m² 2560 mm 1460 mm 1500 mm 400 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 XP CNC-workbench software (external PC not included) height adjustment by arc voltage set-up laser precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules ALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 plasma type comp. air comp. air comp. air comp. air plunge power 16 mm 20 mm 22 mm 25 mm seperating cut 32 mm 38 mm 50mm 57mm recommended thickness (unalloyed steel) 6 mm 16 mm 19 mm 22mm max. thickness (unalloyed steel) 16 mm 20 mm 22 mm 25mm price € 24.600,- € 26.100,- € 27.600,- € 30.600,- Options: water tank to quickly fill and drain thetrough € 2.360,- pneumatic marking pin € 770,- pneumatic engraver € 1.920,- suction bridge (prepared for suction diam.160mm, important for galvanized and thin sheets) € 1.020,- suction- and filter unit Caremaster IFA 1,1 kW, fan power 2.500 m³/h € 2.950,- higher gantry 200 mm € 710,- higher gantry 300 mm € 900,- automatic nesting € Lhjdswiq Scopfx Al Tsh 500,- PlasmaScan camera system € 830,- ohmic contacting for MaxPro200 € 280,-

Condition: new, neu ca. 6 Monate ab Auftragse 162430 € 3069.93 € 1200 mm 730 mm 1200 x 600 mm 1200 x 600 mm 1300 mm 5 - 30 m/min 0-2250 mm/min 0,001-32 mm 685 mm 560 mm 0-675 mm/min 500-2200 1/min 11 kW 5.5 kW 3.1 kW 3.1 kW 4790 mm 3207 mm 2305 mm 8100 kg 1150 kg 1600 kg 405 x 75 x 127 mm 0,0001 mm Lodpfx Alswiqq Ej Tehh iSurface control with Touch screen for 3 axes fully automatic surface and plunge grinding system 10.4” TFT high resolution color control to ensure ease of operation Rough increment, finish increment, spark out (0-9 times), and automatic grinding cycle Cycle interrupt, flip over for part inspection & final dimensions set Wheelhead will rise up to end, start or reference positionnd table parks at left or right side after cycle is completed Display accuracy 0.0001mm I/O diagnosis & alarm display Max. table speed (X axis) 30 m/min Integrated machine-body temperature control Double V table ways are coated with Turcite-B. Table is driven by hydraulic system with cooling unit Liner guideways coupled with precision ballscrew and AC servo moter for precise position on Y and Z axes Automatic lubrication system with a pressure switch to detect and shut down themachine when lubrication system is down Wheel flange with scale, clamping width 43~50 mm (1.7"~2") Grinding wheel Ø405x75xØ127mm (Ø16"x3"xØ5") double recessed Electromagnetic chuck 1200 x 600 mm Automatic dressing and compensation system (mounted over the wheel) LED machine lamp Integrated oil cooling system for lubrication, hydraulic and spindle Splash guard Double-sided water baffle Heat exchanger for electric cabinet Oil Film Guideway system Air purge spindle According to "CE" regulations Operating manual in English or German OPTION (PRICE ON REQUEST): Fully enclosed splash guard

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 956.67 € 200 x 32 x 32 mm 1 kW 2800 1/min 42 mm 250 mm 470 mm 230 mm 325 x 540 x 310 mm Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine 12 months warranty for single shift operation .: 317.762 table version Ljdpfxsy H N Azj Al Tjhh ALTERNATIVE VERSIONS: .: 317.774with machine stand, emergency stop buttom and brake .: 317.777 with MA400D integrated extractor, machine stand, emergency stop buttom and brake

Condition: refurbished (used), functionality: fully functional, grinding length: 630 mm, grinding width: 230 mm, total height: 1,650 mm, total length: 1,535 mm, total width: 1,770 mm, grinding height: 360 mm, feed rate X-axis: 2 m/min, feed rate Z-axis: 20 m/min, grinding wheel diameter: 400 mm, table load: 180 kg, rotational speed (max.): 3,220 rpm, power: 1.5 kW (2.04 HP), disc diameter: 250 mm, Retrofit of Surface Grinding Machine TOS BSKF 20 NC with SCHNEIDER Control System - Machine is fully dismantled and retrofitted Standard Accessories: - 2-axis cycle control, manufactured by Schneider-Electric Functions: Infeed, Spark-Out, Dressing, and Compensation Ljdpexf Ez Uefx Al Tohh - Grinding wheel 250 x 20 x 76 mm - Grinding wheel flange - Electro-magnetic chuck 600 x 200 mm - Automatic feed on Y and Z axes - Diamond dresser holder (without diamond) - Coolant system with settling tank - Machine lamp - Centralized lubrication - Operating tools - Operating manual - CE declaration - Inspection report Included: Transport and packaging On-site relocation with crane/forklift Commissioning Travel and accommodation expenses Accessories: - Partial enclosure - Single-point diamond, 0.75 ct - Balancing arbor with nut and wrench - Grinding wheel balancing stand - Set of levelling elements - Oil filling

Condition: used, Year of construction: 2004, functionality: fully functional, Well used Sunnen honing machine with Felsomat loading system. Diameter range (INSIDE Ø)¹: Krossgrinding® tools: 5.46 to 32 mm when loaded with CGT tools TurboHone® tools: 3.81 to 32 mm when loaded with MMT tools Connecting rod tools: 53.8 to 63.8 mm when fitted with CRT tools Larger tools: 25.4 to 101.6 mm Workpiece²: 8 to 150 mm Max. Workpiece weight: 2.0 kg Spindle speed range: 250 to 3,700 rpm, adjustable Standard speed: High torque in the low speed range: 20 to 1,000 rpm, adjustable Stroke speed range: 33 to 500 H/min, adjustable Lodpfx Aleud Nm Re Tjhh Coolant system Pump motor: 0.18 kW Coolant pump: 5.6 l/min Coolant capacity: 132 l and 11.2 l/min Coolant requirements: Compressed air requirements: 566 l/min at 4.48 bar, 5.52 bar is recommended Temperature range: 0° to 35° C Floor space requirements: (concrete floor) At least 150 mm thick Machine dimensions: L 2946 mm x W 2971 x H 1829 Color: Pearl grey with pewter grey and burgundy decorative stripes Stand weight: 1,579 kg Noise emissions: < 71 dB (A) continuous load, < 75 dB (A) peak load Special features: Automatic set-up: spindle speed, stroke speed, stroke length, infeed value and sparking Automatic finishing: Standard Machine operating modes Automatic: Manual: Series production Individual production Clamping optional

Condition: new, functionality: fully functional, Year of construction: 2024, laser power: 6,000 W, sheet thickness steel (max.): 30 mm, sheet thickness aluminum (max.): 20 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, positioning accuracy: 0.03 mm, workpiece weight (max.): 1,000 kg, overall weight: 5,000 kg, Including 7.5 kW extraction system Compact, space-saving, and affordable fiber laser Manually extendable work table - electrically assisted Work table safety door opens and closes electrically Sturdy welded construction for high rigidity, precision, and durability Machine bed shielded by manganese steel plates to protect against heat, sparks, and slag Effective cutting fume extraction; controlled flaps focus the extraction power on the current work area Raycus laser source with autofocus laser head from HSG (optional laser source from IPG) Laser head with faster focusing speed than comparable units, resulting in higher penetration speeds with thicker materials Main lens protected by an easily replaceable double protective lens Efficient water cooling of the laser head Power stabilizer to compensate for voltage fluctuations, thus ensuring consistent cutting quality Very easy handling of the machine and the user-friendly software Lhedpowf H Avofx Al Tsh Control software with numerous templates for programming simple components Material storage management User-friendly nesting software with many features Camera-monitored laser work area with transmission to screen

Condition: new, Year of construction: 2026, 🏭 POWDER COATING BOOTH KPP Automatic filter cleaning with adjustable pulse timing, plus manual mode. 🧼⏱️🖲️ 100% polyester filters - washable, water-resistant, long-lasting. 🧵💧♻️ ROMER JET™ filter cleaning - patented high-speed air pulse for powerful cleaning. 💥💨🏅 Ledpfx Aljfy T Tbe Tehh Low-noise aluminium fans (74-79 dB) - safer, spark-minimized operation with low power use. 🔇⚡🛡️ Adjustable airflow baffle - antistatic plate protects filters and improves extraction. 🌬️🛡️📈 Leak-tight filter mounting - gasket + clamp for strong sealing and easy service. 🔩🧷✅ Touchscreen control - auto (time), auto (clogging sensor), manual + filter change alerts. 📲🔁⚠️ Optional powder container - waste collection or fluidized tank with direct applicator feed. 🧺💨🎯 Overhead puller - moves beams through the booth, reducing manual effort. 🏗️➡️💪 Integrated sieving unit (with container) - clean recovered powder for reuse, EX-zone vibrator. 🧪♻️⚙️ Explosion-proof design - components selected to prevent explosive mixtures. 🛡️💥✅

Year of construction: 2026, condition: new, 🏭 POWDER COATING BOOTH KPH Automatic filter cleaning with adjustable pulse timing, plus manual mode. 🧼⏱️🖲️ 100% polyester filters - washable, water-resistant, long-lasting. 🧵💧♻️ ROMER JET™ filter cleaning - patented high-speed air pulse for powerful cleaning. 💥💨🏅 Low-noise aluminium fans (74-79 dB) - safer, spark-minimized operation with low power use. 🔇⚡🛡️ Adjustable airflow baffle - antistatic plate protects filters and improves extraction. 🌬️🛡️📈 Leak-tight filter mounting - gasket + clamp for strong sealing and easy service. 🔩🧷✅ Touchscreen control - auto (time), auto (clogging sensor), manual + filter change alerts. 📲🔁⚠️ Optional powder container - waste collection or fluidized tank with direct applicator feed. 🧺💨🎯 Lhjdpfx Ajfz Atbel Toh Overhead puller - moves beams through the booth, reducing manual effort. 🏗️➡️💪 Integrated sieving unit (with container) - clean recovered powder for reuse, EX-zone vibrator. 🧪♻️⚙️ Explosion-proof design - components selected to prevent explosive mixtures. 🛡️💥✅

Year of construction: 2026, condition: new, 🏭 POWDER COATING BOOTH KPZ-3 Automatic filter cleaning with adjustable pulse timing, plus manual mode. 🧼⏱️🖲️ 100% polyester filters - washable, water-resistant, long-lasting. 🧵💧♻️ ROMER JET™ filter cleaning - patented high-speed air pulse for powerful cleaning. 💥💨🏅 Lhodpfsfzkzhjx Al Teh Low-noise aluminium fans (74-79 dB) - safer, spark-minimized operation with low power use. 🔇⚡🛡️ Adjustable airflow baffle - antistatic plate protects filters and improves extraction. 🌬️🛡️📈 Leak-tight filter mounting - gasket + clamp for strong sealing and easy service. 🔩🧷✅ Touchscreen control - auto (time), auto (clogging sensor), manual + filter change alerts. 📲🔁⚠️ Optional powder container - waste collection or fluidized tank with direct applicator feed. 🧺💨🎯 Overhead puller - moves beams through the booth, reducing manual effort. 🏗️➡️💪 Integrated sieving unit (with container) - clean recovered powder for reuse, EX-zone vibrator. 🧪♻️⚙️ Explosion-proof design - components selected to prevent explosive mixtures. 🛡️💥✅

Condition: new, Year of construction: 2020, 🏭 POWDER COATING BOOTH KPO-3 Automatic filter cleaning with adjustable pulse timing, plus manual mode. 🧼⏱️🖲️ 100% polyester filters - washable, water-resistant, long-lasting. 🧵💧♻️ ROMER JET™ filter cleaning - patented high-speed air pulse for powerful cleaning. 💥💨🏅 Low-noise aluminium fans (74-79 dB) - safer, spark-minimized operation with low power use. 🔇⚡🛡️ Adjustable airflow baffle - antistatic plate protects filters and improves extraction. 🌬️🛡️📈 Leak-tight filter mounting - gasket + clamp for strong sealing and easy service. 🔩🧷✅ Touchscreen control - auto (time), auto (clogging sensor), manual + filter change alerts. 📲🔁⚠️ Optional powder container - waste collection or fluidized tank with direct applicator feed. 🧺💨🎯 Overhead puller - moves beams through the booth, reducing manual effort. 🏗️➡️💪 Ljdpfeflk Akex Al Tshh Integrated sieving unit (with container) - clean recovered powder for reuse, EX-zone vibrator. 🧪♻️⚙️ Explosion-proof design - components selected to prevent explosive mixtures. 🛡️💥✅

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, working width: 1,300 mm, transport length: 7,500 mm, volume flow: 40,000 m³/h, total length: 7,500 mm, comprises: 1. CEFLA FEV E Dryer: LAMINAR AIRFLOW DRYER (ECOGEL E4/5) Type: SP-FEV E – 90 kW 2. CEFLA FEV EU Dryer: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU – 110 kW 3. CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU 4. CEFLA TR 3000 Roller Conveyor Heating medium – electric Installed electrical power for both dryers: approx. 210 kW --- 1. CEFLA FEV E Dryer: LAMINAR AIRFLOW DRYER (ECOGEL E4/5) Type: SP-FEV E – 90 kW The in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is equipped with a laminar hot air flow directed opposite to the panel feed direction and features adjustable recirculation air. • Total length: 7,500 mm • Working width: 1,300 mm • Total width: 1,783 mm • Max. drying height: 1,780 mm (conveyor excluded) • Useful pass-through height: 80 mm • Solvent-laden air exhausted externally: 0–4,000 m³/h • Machine control via 5.7" LCD touch panel • VS spark-proof supply/recirculation fan: – Power: 2.2 kW – Flow rate: 40,000 m³/h – Supply air into room: 0–4,000 m³/h – Installed heating capacity: 76,400 kcal/h (heating register 90 kW) --- 2. CEFLA FEV EU Dryer: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU – 115 kW The in-line hot air dryer is suitable for rapid evaporative and curing processes. This dryer is equipped with a laminar hot air flow in the opposite direction to the panel feed with adjustable recirculation air. • Total length: 7,500 mm • Working width: 1,300 mm • Total width: 1,783 mm • Max. drying height: 1,780 mm (conveyor excluded) • Useful pass-through height: 80 mm • Installed electrical power: 115 kW • Solvent-laden air exhausted externally: 0–4,000 m³/h • Machine control via 5.7" LCD touch panel • VS spark-proof supply/recirculation fan: – Power: 2.2 kW – Flow rate: 40,000 m³/h – Output electrical power: 1.5 kW – Supply air into room: 0–4,000 m³/h – Installed heating capacity: 76,400 kcal/h • PR antifreeze protection system for one heating register, with probe and automatic damper control --- 3. CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU Drum cooling tunnel with air knives is highly efficient for achieving increased heat exchange due to high air velocity. The air handling unit consists of: - Supply and recirculation fan: 3 kW; Flow rate: 6,000 m³/h - Exhaust fan: 1.5 kW; Flow rate: 6,000 m³/h - Digital ventilation setting via touchscreen - Air knives installed across the entire tunnel width - Air knife exit speed max. 32.5 m/sec • Total length: 3,000 mm Lhsdpfjw H Aw Ssx Al Tjh • Useful width: 1,300 mm • Total width: 1,783 mm • Pass-through useful height: 80 mm • Max. tunnel height: 1,780 mm (conveyor excluded) • Installed electrical power: 4.5 kW • Machine control via 5.7" LCD touch screen • TT 4000 bar conveyor with double chain, steel guides and chrome-plated bars --- 4. CEFLA TR 3000 Roller Conveyor • Powered rollers with PVC coating • Length: 3,000 mm • Photoelectric sensor for thin panels, thickness 4 mm (Specifications subject to change and errors excepted; prior sale reserved)

Condition: used, Year of construction: 2002, functionality: fully functional, type of input current: three-phase, overall weight: 1,700 kg, filter area: 286 m², suction capacity: 10,000 m³/h, Dust extractor, welding fume extractor, self-cleaning pneumatic vacuum filter for continuous operation by renowned brand Donaldson Torit. Ljdpfxjy D Sclo Al Tjhh Suitable for plasma, laser, sandblasting, soda blasting, welding and all types of dry dusts. The fan is installed after the filter on the clean air side, which minimizes explosion risks. Ultra Web filter cartridges are cleaned pneumatically with compressed air pulses during operation, ensuring high efficiency of the unit. Model – DF+12 SPKTRP Fan power: 11 kW Capacity up to 10,000 m3/h Connection diameter: 315 mm 12 filter cartridges Filter area: 286.8 m2 Year of manufacture: 2002 Equipped with "SparkTrap" spark arrestor system Stock number: 1121

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the upgraded safety and performance test package “P Plus.” This is not a standard laboratory incubator, but rather a high-end safety test chamber specifically designed for aging, performance, and safety testing of lithium-ion energy storage systems. The device is fully functional and has been tested. It originally sustained a transport-related housing damage, which has been professionally repaired and repainted. Technically flawless – visually in very good condition 100% operational – no limitations Price advantage: €1,000 cheaper than comparable units Special Value Added: The unit is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR hazard level 5 (fire/flames, no explosion). What exactly can the device do? (Item 2 – Performance & Application) - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles at temperature) - Long-term temperature runs and thermal cycling tests - Testing of unpowered and cyclical powered cells - Reproducible, precise temperature control throughout the entire chamber - Safe testing under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: - Battery & cell manufacturers - Research and development laboratories - Test labs & safety testing - Automotive / E-mobility / Energy storage sectors The P Plus package turns the KB 720 into a genuine battery safety test cabinet: Integrated Safety Features: - Automatic & manual CO₂ fire suppression system - Smoke detector with optical and acoustic alarm - Mechanical double-door locking (secure containment) - Spark protection inside chamber - Exhaust port with reversible overpressure valve - Connections for external inertization (e.g., nitrogen) Lodpfx Aleyyw E Ro Tehh - Emergency stop / manual trigger of suppression system - Cable feedthroughs for charging and measurement cables Result: The device is designed for testing lithium-ion cells up to EUCAR hazard level 5, where fire or flames may occur, but without explosion or uncontrolled propagation. This is not an abuse or destruction testing device, but a compliant, safe test chamber for real-world operational and fault scenarios. Technical Key Data: Temperature range: –10 °C to +100 °C Internal volume: approx. 698 liters Shelves: 4 × stainless steel Max. load per shelf: 45 kg Max. overall load: 100 kg Electrical Data: Power supply: 200–240 V AC Frequency: 50 / 60 Hz Phase: single-phase Power consumption: approx. 2.1 kW Fusing: 16 A Refrigerant: R134a Protection class: IP 20 Dimensions & Weight: External (W × H × D): approx. 1250 × 1950 × 900 mm Internal (W × H × D): approx. 970 × 1250 × 576 mm In summary – why this device is special: - Genuine battery safety test cabinet - EUCAR hazard level 5 capable - Integrated CO₂ extinguishing system - Large chamber (≈700 l) - High market and resale value Weight: approx. 285–300 kg Documents & Downloads Condition: used Scope of delivery: (see photo) (Specifications subject to change and errors reserved!) Further questions? Please feel free to contact us by phone.

Condition: new, volume capacity 1600 m3/h feed volume 99,9 % length 3.000 Absaugschlauch mm motor 230 Volt motor 1,1 KW weight 80,0 kg range L-W-H 580 x 580 x 900 mm Description: The newly developed filtoo filter unit from TEKA is a mobile filtration system suitable for a wide range of applications involving the filtration of fumes, dust, and gases. It is also suitable for high-alloy steels (stainless steel). The unit has been tested according to DIN EN ISO 15012-1 (2005) and is IFA ( formerly BGIA) certified (IFA No. 201020469/1140) for welding fume class "W3" (separation efficiency: > 99.9%). Where can the SIG 230 filtoo be used? - at welding workstations - in workshops - for soldering applications - by restorers - in metalworking shops Features: - BGIA-certified extraction and filtration system . IFA 1005030 for extraction . from high-alloy steels Steels & Non-ferrous Metals - Operating instructions in German Optional equipment available at extra cost (recommended) - STAVO retrofit kit (dust pre-separation) - For FILTOO with spark guard and collection tray Note: - This unit is only used for extracting dry dust/fumes - Read the operating instructions before initial use Lhjdexaal Rjpfx Al Tsh

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, grinding length: 800 mm, grinding width: 400 mm, grinding height: 400 mm, grinding wheel diameter: 300 mm, table load: 400 kg, grinding wheel width: 50 mm, overall weight: 4,800 kg, ELB Perfekt 8 SPS, year of manufacture 1998, grinding area 800 x 400 mm, grinding wheel 300 x 50 mm, 4.3 kW spindle power, SPS control for automatic grinding cycle (roughing, finishing, sparking out, lifting), dresser mounted on spindle head with compensation. The machine is currently being overhauled by us: the grinding spindle is being newly fitted with bearings, the guideways are being hand-scraped. After the overhaul, the machine will meet the geometry of a new machine and is thus immediately ready for operation. Accessories: electro-permanent magnetic chuck 800 x 400 mm, water tank with automatic paper filter, partial enclosure. All functions are tested, and the machine can be demonstrated under power at our facility. We are also happy to handle installation and on-site training. Financing/leasing is no problem; we’d be happy to provide an offer! Lhsdpfx Ajrpz Evel Tsh

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, grinding length: 600 mm, grinding width: 400 mm, grinding height: 400 mm, grinding wheel diameter: 300 mm, table load: 400 kg, grinding wheel width: 50 mm, overall weight: 3,600 kg, ELB Perfekt 6, year of manufacture 2002, grinding area 600 x 400 mm, grinding wheel 300 x 50 mm, 4 kW spindle power, automatic grinding cycle, roughing, finishing, spark-out, lifting, dresser mounted on spindle head with compensation. The machine has been professionally overhauled by us and now meets the geometry of a new machine. The grinding spindle has new bearings. Accessories: electro-permanent magnetic clamping plate 600 x 400 mm, water tank with paper filter unit. All functions have been tested and the machine can be demonstrated under power at our facility. We are also happy to handle on-site installation and training, as well as future servicing. Financing/leasing is available; we will be pleased to provide an offer! Lhedpfx Alexdalfs Tsh

Condition: new, Year of construction: 2026, grinding length: 700 mm, grinding width: 400 mm, COSMOS E 7040 NC Precision Surface Grinding Machine, grinding area 700 x 400 x 350 mm, spindle power 3.7 kW, grinding wheel 300 x 50 x 76.2 mm, Mitsubishi PLC control and drive technology, very user-friendly, incl. magnetic chuck 700 x 400 mm with adjustable holding force, grinding spindle with speed regulation, automatic grinding cycle with rough grinding, fine grinding, spark-out and retraction, dressing with size compensation, coolant system with paper band filter. 12 months warranty. Inspection under power and test grinding possible at any time. We are happy to provide on-site installation and training as well as subsequent service! Financing / leasing available upon request – we will gladly provide an offer! Lhjdporwwt Sefx Al Toh