Used Swiss Type Automatic Lathe for sale (58,030)

Condition: not inspected (used), Year of construction: 1994, operating hours: 8,000 h, functionality: unexamined, Machine in good condition Predpfxev Im Sde Ab Roc

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Equipment: documentation/manual, Machine in production, can be inspected. Machine is running without any defects. Machine is equipped with: - bar feeder FMB - swarf conveyour - increased pressure pump - 2x spindle - front and back drilling tools Prjdpfx Aozx Arqjb Rec - live tooles for milling - part coveyour belt - signal lamp

Condition: good (used), functionality: fully functional, 1 x Multi-spindle lathe Manufacturer: Traub Model: TK 42 Year of manufacture: 1986 With tailstock Spindle gearhead Chip conveyor Part conveyor The machine can be inspected while powered on. For an additional charge, a bar feeder can be supplied. Predszz Iyljpfx Ab Rec

Year of construction: 1987, condition: used, machine/vehicle number: 7.0176, Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 - 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11t General / technical data: Portal-6Spindle automatic lathe spindle pitch circle: 300mm number of longitudinal slides: 6 number of cross slides: 2 large cross slide stroke: 60mm largest longitudinal slide stroke: 125mm Spindle speeds: Stepless 562 - 3373 rpm Main time range: Stepless 1,95 - 78 sec. Secondary time range: 0,79 - 2,13 sec. Drive power: DC motor spindles 20kW; feeds 8kW footprint: approx. 1720 x 4700mm Predpfsin Ub Tex Ab Rec Remark: The machine is not convertible for bar work. Equipment: - 1 creep feed drive for set-up operation - 1 automatic central lubrication device - 1 coolant device with pipes and pump - 1 cross slide, position 3 (without curves) - 1 cross slide, position 5 - 6 longitudinal slides (without drive, without curves) - Feed for independent longitudinal slide, flexible, position 1-6 - Programmable logic controller IPC 620 - Noise protection 80db - Automatic feed restart with electrical protection of the side door - Schanier belt chip conveyor - Design of the machines with DC drives for speed and feed - KIENZLE terminal 2450-07 with signal interface and data transmission control. Accessories: Electrical version: The electrical equipment consists of a DC main drive with power 20 kW for the spindle drive and a three-phase servo motor for the feed drive with power 8kW (protection class IP 54) and corresponding switchgear and control devices as well as the necessary installation. Total connection of the machine 32kW/h.

Condition: good (used), Year of construction: 2012, turning diameter 400 mm turning length 650 mm control Siemens 840D SL x-travel 275 mm z-travel 700 mm spindle turning speed range 4000 U/min spindle bore 65 mm turret (x-stations) 16 Pcs. VDI30 tailstock quill taper MT 4 swing dia. 600 mm Tools speed 5000 U/min total power requirement 37 kW weight of the machine ca. 5,5 t dimensions of the machine ca. LBH 2,5 x 1,6 x2,0 m Prjdpfx Aj Afp D Rjb Rsc - C-axis - 3 driven tools - 4-jaw chuck (Röhm, 250 mm) - Renishaw measuring arm - Chip conveyor - Interface for bar loader - Siemens ShopTurn - Documentation

Condition: used, Year of construction: 2018, Technical details: Prjdpfx Aez Sr Duob Rec weight of the machine ca.: 3,5 t

Condition: good (used), Year of construction: 2002, The machine is in good condition, equipped with Fanuc Series 16i-T control and FMB Turbo 5-42 bar feeder. Predoy Eb N Dopfx Ab Rec

Condition: ready for operation (used), functionality: fully functional, STAR SH-12 Control: Fanuc 21-T Psdpfxexwugdj Ab Rjrc Device for unloading long parts Complete with IEMCA MINI BOSS 325 bar feeder

Condition: used, The automatic profiling machine Weinig Type Univar 10 is designed for profiling and rebating windows, doors, individual components and similar workpieces with circumferential profiles. Its mechanisation enables single-person operation, making the machine suitable for efficient processing in window and door manufacturing. Technical data: - Year of manufacture: 1998 - 1. Profiling spindle – Motor: 11 kW - 1. Profiling spindle – Spindle diameter: 50 mm - 1. Profiling spindle – Clamping length: 320 mm - 1. Profiling spindle – Stroke: 4 x 80 mm - 1. Profiling spindle – Design: hydraulic - 1. Profiling spindle – Synchronisation device - 2. Profiling spindle – Motor: 11 kW - 2. Profiling spindle – Spindle diameter: 50 mm Prjdpfx Ajztv Easb Rjc - 2. Profiling spindle – Clamping length: 320 mm - 2. Profiling spindle – Stroke: 4 x 80 mm - 2. Profiling spindle – Design: hydraulic

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Year of manufacture 2018 Control: Fanuc TCM Prsdpfx Ajy I Dq Ajb Rjc Further data to follow...

Condition: good (used), Year of construction: 1983, year of last overhaul: 2004, Turning center Manufacturer: TRAUB Type: TD36 Year of manufacture: 1983 Rebuilt: 2004 with: drilling tool holder, material feed system Pedpfx Aboz Hm Sne Rjrc

Condition: good (used), Year of construction: 2003, functionality: fully functional, Fanuc control system, Psdpfjz Ryulsx Ab Rerc extraction spindle, FMB loading magazine.

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: 24xx, For sale is a used but fully functional D6 with a turret; the machine was still in production up until it was shut down. The sale of the machine excludes any kind of guarantee or warranty! Sold as seen! Psdpfx Ajx Nphcjb Rorc

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, spindle motor power: 50 W, turning length: 14,000 mm, turning diameter over cross slide: 1,370 mm, spindle speed (max.): 300 rpm, spindle speed (min.): 3 rpm, turning diameter: 1,850 mm, spindle bore: 206 mm, overall weight: 38,000 kg, rotational speed (max.): 300 rpm, rotational speed (min.): 3 rpm, type of input current: three-phase, bar passage: 206 mm, total width: 2,400 mm, total length: 19,000 mm, total height: 2,500 mm, workpiece weight (max.): 20,000 kg, input voltage: 380 V, distance table to spindle center: 14,000 mm, travel distance X-axis: 14,000 mm, Equipment: documentation/manual, Includes 2 saddles. Psdpoz Taaaefx Ab Rorc

Condition: excellent (used), Year of construction: 2021, turning diameter 300 mm spindle bore 75 mm bar capacity 65 mm turning speed range 6.000 U/min turning length 508 mm travel -z axis 560 mm travel -x axis 210 mm turret (x-stations) 24 control FANUC 0i Smart Plus Touch c-axis 0,001° 0 total power requirement 23 kVA weight of the machine ca. 3,8 t dimensions of the machine ca. LTH 2,9 x 1,7 x 1,8 m Power-on hours = 9,723 hrs Processing time = 2,158 hrs - 24-station tool turret, driven tools at 6,000 rpm - Workpiece catcher Prodpo Afp Ebofx Ab Rsc - RENISHAW measuring probe, automatically swiveling - Sub-spindle - Chip conveyor - Coolant pump - Magazine equipped with static tools, including 2 driven tools Accessories: Includes SAMSYS Multi3000 short-bar loader Includes collet chuck Includes 38 collets Includes 210 mm power chuck with various jaws Includes 130 mm power chuck for sub-spindle Includes 2 x driven tool holders (radial + axial) Includes 10 static tool holders Includes inserts for tool holders Includes turning tool holders Includes USB & LAN interface

Condition: used, Year of construction: 2019, Technical details: bar material dia.: 38 mm turning length: 350 mm turning speeds: 7.000 / 7.000 U/min number of tools: 30 (3 x 10) driven tools: ja / yes control: FANUC 31i-B5 rapid traverse: 30 m/min total power requirement: 10,5 kVA weight of the machine ca.: 6,5 t dimensions of the machine ca.: 2,50 x 1,45 x 1,75 plus Lademagazin m work piece power: 4 kW toolpiece turning speed range: 5.700 1/min Accerories main spindle power 11 kW sub spindle power 7,5 kW CNC sliding headstock machine STAR ST 38, 3 turrets, 12 CNC Axis (X1/Z1/Y1/C1/X2/Z2/Y2/YA2/C2/X3/Z3/Y3, Fireextinguisher KRAFT und BAUER FB 703, partscatcher and conveyor belt (for long parts), Psdpfxomu Rtuj Ab Rerc LTA oilmist suction, chiller for oil, machining with oil as coolant, reading hours: approx. 14.500 hours "machine on", approx. 4.100 hours "machining" *

Condition: used, Year of construction: 2011, functionality: fully functional, turning length: 320 mm, spindle speed (max.): 7,000 rpm, bar passage: 32 mm, feed length Z-axis: 320 mm, bar diameter (max.): 32 mm, power: 7 kW (9.52 HP), travel distance Z-axis: 320 mm, For sale: Hanwha STL32-HY CNC lathe (9-axis live tooling, Ø32mm max.) Siemens 840D control panel Year 2011, machine was retrofitted in 2018 Chip conveyor Numerous accessories/tooling included with the machine Available immediately Predpfx Aoytfynsb Rjc Machine sold as is, no diagnostics performed. HANWHA/CINCOM/TORNOS/NOMURA/STAR/BIGLIA/TSUGAMI/AUTOMATIC BAR FEEDER/KMX

Condition: used, Year of construction: 1995, Technical details: number of spindles: 6 Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SFH130 Yob: 1995 six-spindle automatic lathe Pjdpfxew Hbz As Ab Rorc 6 main spindles as a chucker automatic lathe control Siemens S7-200 PLC Dnt drive loading and disloading in position 6 additional cooling pump with magnetic spark plug filter Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 2005, Technical details: spindle passage: 36 mm Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: A36PC Yob: 2005 Loading magazine by Pietro Cucchi Knoll unit Predpfxszg Aw Nj Ab Rsc 7 radial cross-type carriages 2 additional speed motors in 4th and 5th positions 2 additional speed motors for front spindles in position D (pick-up) and B (for front motorized spindle) 1 polygon cutter 1 motorized front spindle 1 radial motorized in position IV for cross-type carriage 1 radial motorized in position V to be mounted on X-type carriage only (no cross-type carriage) 1 straight head for motorized position IV 1 90-degree tilted head for motorized position IV 1 tilt-adjustable head for motorized position IV Please, contact us for getting more information and pictures on mail(at) or *

Condition: ready for operation (used), Year of construction: 2011, operating hours: 8,733 h, functionality: fully functional, spindle bore: 26 mm, rotational speed (max.): 7,200 rpm, number of axes: 5, number of tool turrets: 2, Long-turn lathe with an extended accessory package and spare parts! Counter-spindle: Completely re-conditioned 05/2026 TECHNICAL DETAILS CNC control: GE Fanuc Series 18i-TB Number of axes: 5 Axes: X1, X2, Y, Z, C Spindle Spindle speed: 50–7,200 rpm Spindle bore: 26 mm Spindle stroke: 160 mm TURRET Number of turrets: 2 Positions per turret: 6 Psdpfx Aeztn Imob Rsrc MACHINE DETAILS Motor power: 3.7 kW Weight: 2,600 kg Spindle hours: 8,733 h Control on: 10,642 h Feed time: 3,257 h Part counter: 478,135 EQUIPMENT - Bar feeder FMB Turbo 3-36, year of manufacture 2011 - Chip conveyor - Package of fixed and powered tool holders - Package of collets and guide bushings - Discharge system for long parts including reduction sleeves - Double-cone clamping system on the main spindle, system JBS - Breakage detection for cut-off tools, Detector France - Ejection control, Detector France - JBS guide bushing, not yet installed - Tool presetting device with optics for external tool setup - Replacement worms for chip conveyor - Mounting device for adjusting the cylinder of the working hood - Various spare parts

Condition: excellent (used), Year of construction: 2001, Control system: Fanuc 16-TC Maximum turning diameter: 20 mm Spindle speed: 10,000 rpm 8-position turret with powered tool Prjdo Afpx Ujpfx Ab Rjc Linear slides (3 powered stations) Live tooling spindle (indexing 15°) C-axis on main spindle Chip conveyor Coolant system Bar feeder: FMB Turbo 3-26/3200

Condition: excellent (used), Year of construction: 1995, - machine in stock - after a technical review - very good condition - year of production 1995   TECHNICAL PARAMETERS: - turning length max 1300 mm - turning diameter 120 mm - three lower knives - five top knives - steady - hydraulic knife control - automatic control - magazine   Podpfx Abod Rkkzs Rsrc Machine dimensions: - length 380 cm - width 210 cm - height 215 cm - weight ~ 3490 kg

Condition: used, Year of construction: 2001, Technical details: number of spindles: 6 spindle passage: 32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schutte Type: SF32 S Dnt Yob: 2003 Eight-spindle automatic lathe with 6 main spindles max. nominal diameter: D=32mm Spindle drum with hirth coupling, Elbaron oil mist filter, sorting chute, Interface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA52/42/F); coolant tank with hinged chip conveyor; Schimpke KSS active cooler, control: Siemens S7-300 PLC; tooling included in delivery may differ from the images Please, contact us for getting more information and pictures on mail(at) or Psdpfx Aeyqvlvsb Rjrc *

Condition: good (used), TECHNICAL DATA AXLE Rapid feed X,Y: 15000 mm/min Rapid feed A,B: 15000 mm/min Rapid feed Z1,Z2,E: 18000 mm/min Rapid feed C: 90000°/min Smallest input unit: 0.001 mm Smallest input unit, C-axis: 0.001° MACHINING PERFORMANCE Max. turning diameter: 20 mm Max. Headstock stroke: 205 mm Max. Drilling capacity: Stationary: 14 mm; Driven: 8 mm Max. Tapping capacity: Stationary: M10 x P1.5; Driven: M6 X P1.0 MAIN SPINDLE Spindle speed: 500 - 10000 rpm Drive: Spindle drive Main spindle motor: 3.7 / 5.5 kW Main spindle bore: 26 mm WHEELING SPINDLE Max. Clamping diameter: 20 mm Max. Part length for ejection to the front: 150 mm Max. Clamping length: 75 mm Spindle speed: 500 - 10000 rpm Pick-up spindle motor: 2.2 / 3.7 kW Indexing angle: 1°, 15° CONFIGURATION Operation mode: Right-handed Dimensions: 2700 x 1400 x 2400 mm Weight: 3400 kg SCOPE OF OFFER U.A: (list not exhaustive) Control system: Fanuc Fire extinguishing system: Siemens Predpfeu Uic Tox Ab Roc Oil mist separator: Donaldson Transformer Hydraulic unit Parts conveyor Chip conveyor Bar feeder: LNS Tool holder Exact scope of supply according to photo gallery We assume no liability for the correctness, completeness and up-to-dateness of the information.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 0509, Technical specifications Manufacturer: STAR Micronics Type: ECAS-20 Year of manufacture: 2011 CNC long-turn lathe Control system: Star Motion Control System Max. turning diameter: 20 mm Spindle stroke: 205 mm CNC axes: 10 Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm Spindle power: 2.2 kW / 3.7 kW each (30 min.) C-axis: main and counter spindle Powered tools up to 8,000 rpm Turning tools: 4 front, 2 rear Powered tool positions up to 6 (optional) Drilling diameter max. 10 mm Milling diameter max. 10 mm Thread cutting up to M8 Coolant tank: 120 liters Connected load: 8 kVA Prsdpe Aarq Njfx Ab Rsc Weight: approx. 3,500 kg Dimensions: 2,588 x 1,150 x 1,765 mm